Bioethanol Production from Lignocellulosic Feedstocks Based on Enzymatic Hydrolysis: Current Status and Recent Developments

2013 ◽  
Vol 13 (1) ◽  
pp. 1-21 ◽  
Author(s):  
Noura El-Ahmady ◽  
Sahar Deraz ◽  
Ashraf Khalil
2021 ◽  
Vol 06 ◽  
Author(s):  
Ayekpam Chandralekha Devi ◽  
G. K. Hamsavi ◽  
Simran Sahota ◽  
Rochak Mittal ◽  
Hrishikesh A. Tavanandi ◽  
...  

Abstract: Algae (both micro and macro) have gained huge attention in the recent past for their high commercial value products. They are the source of various biomolecules of commercial applications ranging from nutraceuticals to fuels. Phycobiliproteins are one such high value low volume compounds which are mainly obtained from micro and macro algae. In order to tap the bioresource, a significant amount of work has been carried out for large scale production of algal biomass. However, work on downstream processing aspects of phycobiliproteins (PBPs) from algae is scarce, especially in case of macroalgae. There are several difficulties in cell wall disruption of both micro and macro algae because of their cell wall structure and compositions. At the same time, there are several challenges in the purification of phycobiliproteins. The current review article focuses on the recent developments in downstream processing of phycobiliproteins (mainly phycocyanins and phycoerythrins) from micro and macroalgae. The current status, the recent advancements and potential technologies (that are under development) are summarised in this review article besides providing future directions for the present research area.


2017 ◽  
Vol Volume 113 (Number 3/4) ◽  
Author(s):  
Phillip de Jager ◽  
Liezel Frick ◽  
Pieter van der Spuy ◽  
◽  
◽  
...  

Abstract There is a national drive to increase PhD production, yet we know little about how this imperative takes shape within different disciplines. We therefore set out to explore recent developments and the current status of the PhD in economics at four South African research-intensive universities. A data set of all economics PhDs produced in these commerce faculties during the period 2008–2014 was analysed to determine whether the departments of economics responded to the call for increased doctoral production, and the role the PhD by publication might have played in the process. How an increase in quantity might influence doctoral education in the respective academic departments was also considered by supplementing the quantitative data with perspectives from heads of department at the four institutions. The notable increase in doctoral production over the time period studied shows that national and international trends have influenced doctoral education in economics departments within South African research-intensive universities. Increased usage of the PhD by publication has implications for policy and pedagogical practice within these departments, especially as there seems to be limited available supervisory capacity. Other changes in departmental practices, such as the entrenchment of a research culture and the promotion of collaborative research amongst students and staff, also contributed to maintain quality in doctoral education.


Sensors ◽  
2020 ◽  
Vol 20 (20) ◽  
pp. 5826
Author(s):  
Yinming Zhao ◽  
Yang Liu ◽  
Yongqian Li ◽  
Qun Hao

Resistance strain force sensors have been applied to monitor the strains in various parts and structures for industrial use. Here, we review the working principles, structural forms, and fabrication processes for resistance strain gauges. In particular, we focus on recent developments in resistance stress transfer for resistance strain force sensors and the creep effect due to sustained loads and/or temperature variations. Various error compensation methods to reduce the creep effect are analyzed to develop a metrology standard for resistance strain force sensors. Additionally, the current status of carbon nanotubes (CNTs), silicon carbide (SiC), gallium nitride (GaN), and other wide band gap semiconductors for a wide range of strain sensors are reviewed. The technical requirements and key issues of resistance strain force sensors for future applications are presented.


2014 ◽  
Vol 82 ◽  
pp. 91-96 ◽  
Author(s):  
Jingbo Li ◽  
Kejing Wu ◽  
Wenjuan Xiao ◽  
Jinjin Zhang ◽  
Jianghai Lin ◽  
...  

2010 ◽  
Vol 64 (4) ◽  
pp. 283-293 ◽  
Author(s):  
Zlatica Predojevic

The use of renewable energy sources (biofuels), either as a component in the conventional fossil fuels, gasoline and diesel, or as a pure biofuel, contributes to energy saving and decrease of total CO2 emission. The use of bioethanol mixed with gasoline significantly decreases gasoline consumption and contributes to environment protection. One of the problems in the production of bioethanol is the availability of sugar and starch based feedstock used for its production. However, lignocellulosic feedstocks are becoming more significant in the production of bioethanol due to their availability and low cost. The aim of this study is to point out the advantages and shortcomings of pretreatment processes and hydrolyses of lignocellulosic feedstocks that precede their fermentation to bioethanol.


Author(s):  
Tuan-Dung Hoang ◽  
Nhuan Nghiem

Ethanol produced from various biobased sources (bioethanol) has been gaining high attention lately due to its potential to cut down net emissions of carbon dioxide while reducing burgeoning world dependence on fossil fuels. Global ethanol production has increased more than six-fold from 18 billion liters at the turn of the century to 110 billion liters in 2019 (1,2). Sugar cane and corn have been used as the major feedstocks for ethanol production. Lignocellulosic biomass has recently been considered as another potential feedstock. This paper reviews recent developments and current status of commercial production of ethanol across the world. The review includes the ethanol production processes used for each type of feedstock, both currently practiced at commercial scale and newly developed technologies, and production trends in various regions and countries in the world.


Sign in / Sign up

Export Citation Format

Share Document