Artistic Education Areas

2016 ◽  
pp. 712-733
Author(s):  
Marina Morari
Keyword(s):  
General Education ◽  
Development Process ◽  
Methodological Approach ◽  
Design And Development ◽  
Affective Attitude ◽  
The Impact ◽  
Theoretical Conceptualization ◽  
The Ideal

The artistic education areas in didactic process are articulated with different weight. The aim of this chapter is theoretical substantiating of reference marks for methodological integralization of artistic education. This chapter analyses the impact of artistic education arias to general education. Based on hypothesis that inconsistent methodological approach of the artistic education demarches in different schooling stages, it is confirming the coherence of our society in realizing the formation/development process of the pupil's personality through and for the art. Thus, in context of methodological integration the ideal of integral personality on the affective, attitude, cognitive, cultural line belongs to artistic education arias. It will offer new perspectives for the theoretical conceptualization, design and development of innovative educational-artistic methodologies and technologies.

scholarly journals Design and Development of Weatherproof Seals for Prefabricated Construction: A Methodological Approach

Buildings ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 117 ◽  
Author(s):  
Kristopher Orlowski ◽  
Kasun Shanaka ◽  
Priyan Mendis
Keyword(s):  
Development Process ◽  
Methodological Approach ◽  
Building Industry ◽  
Practical Application ◽  
Design And Development ◽  
Modular Systems ◽  
Design Life ◽  
Flow Charts ◽  
And Performance ◽  
Careful Design

Satisfactory weatherproofing of buildings is vital to maximise their design life and performance which requires the careful design of external sealing technologies. Systems commonly available have served well in conventional construction however with many prefabricated systems emerging in the building industry new and novel means of weatherproofing between panels and modules need to be developed purpose specific to this application. This paper presents a holistic and fundamental methodological approach to Design and Development of waterproof seals and has been applied specific for prefabricated panelised and modular systems. Two purpose specific weatherproof seals are finally presented. Flow charts of the overview of the suggested methodological approach and the processes within which include DfMA that have been incorporated into understanding and developing seals for this practical application. These strategies have enabled a resourceful and holistic set of processes that can be adapted and used for similar forms of product research in new and developing areas of construction such as prefabrication. The design and development process is thoroughly investigated and has resulted in an exploration of the technical challenges and potential solutions which take into consideration factors from installation limitations to building tolerances.

scholarly journals Design and Development of Weatherproof Seals for Prefabricated Construction: A Methodological Approach

2018 ◽  
Author(s):  
Kristopher Orlowski ◽  
Kasun Shanaka ◽  
Priyan Mendis
Keyword(s):  
Development Process ◽  
Methodological Approach ◽  
Building Industry ◽  
Practical Application ◽  
Design And Development ◽  
Modular Systems ◽  
Design Life ◽  
Flow Charts ◽  
And Performance ◽  
Careful Design

Satisfactory weatherproofing of buildings is vital to maximise their design life and performance which requires the careful design of external sealing technologies. Systems commonly available have served well in conventional construction however with many prefabricated systems emerging in the building industry new and novel means of weatherproofing between panels and modules need to be developed purpose specific to this application. This paper presents a holistic and fundamental methodological approach to Design and Development of waterproof seals and has been applied specific for prefabricated panelised and modular systems. Two purpose specific weatherproof seals are finally presented. Flow charts of the overview of the suggested methodological approach and the processes within which include DfMA that have been incorporated into understanding and developing seals for this practical application. These strategies have enabled a resourceful and holistic set of processes that can be adapted and used for similar forms of product research in new and developing areas of construction such as prefabrication. The design and development process is thoroughly explored and has resulted in an exploration of the technical challenges and potential solutions which take into consideration factors from installation limitations to building tolerances.

The methodological approach for the determination of the pressure of artificial raindrops as a question of the theory of splash soil erosion

2020 ◽  
pp. 24-28
Author(s):  
Mihail Zver'kov
Keyword(s):  
Block Diagram ◽  
Methodological Approach ◽  
Control Measures ◽  
Soil Conditions ◽  
Effective Pressure ◽  
Long Distance ◽  
Splash Erosion ◽  
Rain Drops ◽  
Artificial Rain ◽  
The Impact

To the article the results of the theoretical and experimental researches are given on questions of estimates of the dynamic rate effect of raindrop impact on soil. The aim of this work was to analyze the current methods to determine the rate of artificial rain pressure on the soil for the assessment of splash erosion. There are the developed author’s method for calculation the pressure of artificial rain on the soil and the assessment of splash erosion. The study aims to the justification of evaluation methods and the obtaining of quantitative characteristics, prevention and elimination of accelerated (anthropogenic) erosion, the creation and the realization of the required erosion control measures. The paper considers the question of determining the pressure of artificial rain on the soil. At the moment of raindrops impact, there is the tension in the soil, which is called vertical effective pressure. It is noted that the impact of rain drops in the soil there are stresses called vertical effective pressure. The equation for calculation of vertical effective pressure is proposed in this study using the known spectrum of raindrops. Effective pressure was 1.4 Pa for the artificial rain by sprinkler machine «Fregat» and 5.9 Pa for long distance sprinkler DD-30. The article deals with a block diagram of the sequence for determining the effective pressure of rain drops on the soil. This diagram was created by the author’s method of calculation of the effective pressure of rain drops on the soil. The need for an integrated approach to the description of the artificial rain impact on the soil is noted. Various parameters characterizing drop erosion are considered. There are data about the mass of splashed soil in the irrigation of various irrigation machinery and installations. For example, the rate (mass) of splashed soil was 0.28…0.78 t/ha under irrigation sprinkler apparatus RACO 4260–55/701C in the conditions of the Ryazan region. The method allows examining the environmental impact of sprinkler techniques for analyzes of the pressure, caused by raindrops, on the soil. It can also be useful in determining the irrigation rate before the runoff for different types of sprinkler equipment and soil conditions.

Расчетные методы оценки ударной вязкости сварных элементов с трещинами

2020 ◽  
Vol 44 (3) ◽  
pp. 22-36
Author(s):  
Keyword(s):  
Stress Intensity ◽  
Impact Strength ◽  
Welded Joints ◽  
Development Process ◽  
Welded Joint ◽  
Operating Temperature ◽  
Crack Development ◽  
Heterogeneous Structure ◽  
Critical Crack Length ◽  
The Impact

Практика показывает, что для сварных конструкций, эксплуатируемых в условиях Крайнего Севера необходимо уделять внимание работоспособности сварных соединений при низких температурах. Металл сварных соединений в процессе воздействия обработки изменяет свои свойства, снижается ударная вязкость, образуется гетерогенная структура с большой степенью разнозернистости. Чтобы оценивать и иметь возможность правильно контролировать термическое воздействие и последствия сварочного процесса, требуется решить задачу аналитического определения ударной вязкости для всех зон сварного соединения. В настоящей статье представлен инженерный метод оценки ударной вязкости, применимый для любой зоны сварного соединения, в которой имеется острый или особый концентратор напряжений – трещина. Разработанный аналитический метод расчета ударной вязкости отражает качественную и количественную картину взаимосвязи структурно-механических характеристик и работы развития трещины в диапазоне температур 77…300 К. Предложенная схематизация зависимости критического коэффициента интенсивности напряжений от температуры позволила найти коэффициенты, характеризующие свойства материала, и выполнить расчеты изменения предела текучести и предела прочности от температуры эксплуатации. Построены графики зависимости работы развития трещины от температуры эксплуатации для сталей 15ГС и 17ГС, сравнение которых с экспериментальными данными показывает удовлетворительное согласование. Найдено, что при напряжениях предела выносливости отношение работы развития трещины к критической длине трещины постоянно, не зависит от температуры и для сталей 15ГС и 17ГС равно около 10. Ключевые слова: ударная вязкость, работа разрушения, коэффициент интенсивности напряжений, трещина, феррито-перлитная сталь, зона термического влияния. For welded structures under operation in the Far North, attention must be paid to the performance of welded joints at low temperatures. The properties of metal of welded joints are changed in the process of treatment, its toughness decreases, and a heterogeneous structure with a large range of different grain sizes is formed. In order to evaluate and be able to correctly control the thermal effect and the consequences of the welding process, it is necessary to solve the problem of analytical determination of impact strength for all zones of the welded joint. The paper presents an engineering method for evaluation of the impact strength applicable to any area of the welded joint in which there is a sharp or super sharp stress concentrator – a crack. The developed analytical method for calculating the impact strength reflects a qualitative and quantitative codependency of structural and mechanical characteristics and the process of crack development in the temperature range of 77–300 K. The proposed schematization of dependence of the critical coefficient of stress intensity on the temperature made it possible to find coefficients characterizing the properties of the material and to perform calculations of changes in yield strength and tensile strength on operating temperature. Graphs of the crack development process dependency on the operating temperature for 15ГС and 17ГС steels were constructed, and their comparison with experimental data displays satisfactory agreement. It was found that at endurance limit stresses, the ratio of the crack development process to the critical crack length is constant, non-dependent on temperature, and is equal to 10 for 15ГС and 17ГС steels. Keywords: impact strength, fracture work, stress intensity factor, crack, ferrite-pearlite steel, heat affected zone, steel tempering.

Specifics of creating an effective system of project financing of innovation and investment activities of dairy subcomplex enterprises

2020 ◽  
Vol 26 (9) ◽  
pp. 1951-1969
Author(s):  
S.A. Chernikova
Keyword(s):  
Financial Stability ◽  
Current Model ◽  
Methodological Approach ◽  
Information Support ◽  
Competitive Advantages ◽  
Project Financing ◽  
Financing System ◽  
Management Of Innovation ◽  
Effective System ◽  
The Impact

Subject. The article considers the need to study the financing of investment and innovation processes and creating an effective system of project financing. Objectives. The purpose is to search for new opportunities to enhance the competitive advantages of enterprises of the dairy subcomplex, to ensure their financial stability and steady position in specialized agricultural food-product markets. Methods. The study draws on the theoretical and methodological approach to the impact of project management of innovation and investment activities on improving the efficiency of the project financing system and financial stability of enterprises operating in the dairy subcomplex. Results. The findings show that four levels can be distinguished in the formation and improvement of the system of project financing and the management of innovation and investment activities, depending on the depth of transformation. The principle that provides the integration of the said system with the current model of management of the dairy subcomplex enterprise is defined as a driver. The paper offers a number of levels of the system transformation to gain competitive advantages. Conclusions. I present a mechanism for creating and improving the system of project financing and the management of innovation and investment activities, and a mechanism for interaction of the network of automated information systems, intended to make management decisions, with the automation of information support to innovative solutions.

Scale Development: Measuring Job-Family Incivility

2019 ◽  
pp. 31-48
Author(s):  
W G S Mahalekamge ◽  
Nilakshi W K Galahitiyawe
Keyword(s):  
Scale Development ◽  
Work Environment ◽  
Development Process ◽  
Workplace Incivility ◽  
Dynamic Processes ◽  
Validity And Reliability ◽  
Development Approach ◽  
The Impact ◽  
Compound Effect

The main contribution of this paper is the development of the job-family incivility scale. This paper seeks to explore the complex inter-relationships between workplace incivility and family incivility dimensions of job-family incivility by examining the dynamic processes by which job-family incivility is initiated and sustained using a scale development approach. In doing so, the paper highlights the absence of valid and reliable measures that estimate the compound effect of workplace incivility and family incivility – referred to as job-family incivility. A scale development process introduced by Quazi et al. (2016) is presented and stages in the construction of the scale are discussed including measures of validity and reliability. The findings of the study demonstrate the validity and reliability of the job-family incivility scale developed by the current researchers. The main aims of this research are to emphasize the impact of workplace incivility and family incivility on the employees in the work environment, and to discuss the techniques that can be used to mitigate such detrimental activities.

The Impact of the Industrial Processing of Oil on the Rainfall Water Quality

2017 ◽  
Vol 68 (1) ◽  
pp. 175-179
Author(s):  
Oana Roxana Chivu ◽  
Augustin Semenescu ◽  
Claudiu Babis ◽  
Catalin Amza ◽  
Gabriel Iacobescu ◽  
...  
Keyword(s):  
Water Quality ◽  
Sulfuric Acid ◽  
Experimental Research ◽  
Air Purification ◽  
High Toxicity ◽  
Industrial Processing ◽  
Mobile Sources ◽  
Specific Activities ◽  
The Impact ◽  
The Ideal

Rainfall is a major component of the environment and the main source of the air purification becouse of many pollutants increases who have the most varied sources: various human activities including industry and agriculture, and some household duties. Air purification by means of precipitation is achieved by numerous highly complex mechanisms. The final products of degradation of the pollutant in the air, which are generally harmless, can be reacted with each other in the presence of water, giving rise to the final compounds with a high toxicity. Thus, exhaust, mobile sources of noxious almost identical to those specific activities in the industrial processing of oil, contain lead which is the ideal catalyst for converting SO2 to sulfuric acid in the presence of rainwater, with all the disadvantages that they create. This paper will present an experimental research oabout how rainfall water quality is influenced by the activity of the industrial processing of oil, in a chemical plant in Constanta County.

scholarly journals Exploring Factors Influencing Scenarios Evolution of Waste NIMBY Crisis: Analysis of Typical Cases in China

2021 ◽  
Vol 18 (4) ◽  
pp. 2006
Author(s):  
Ling He ◽  
Qing Yang ◽  
Xingxing Liu ◽  
Lingmei Fu ◽  
Jinmei Wang
Keyword(s):  
Network Theory ◽  
Development Process ◽  
Dynamic Bayesian Network ◽  
Impact Factors ◽  
Social Stability ◽  
Ground Theory ◽  
Evolution Path ◽  
Dynamic Scenario ◽  
The Impact

As the impact factors of the waste Not-In-My-Back Yard (NIMBY) crisis are complex, and the scenario evolution path of it is diverse. Once the crisis is not handled properly, it will bring adverse effects on the construction of waste NIMBY facilities, economic development and social stability. Consequently, based on ground theory, this paper takes the waste NIMBY crisis in China from 2006 to 2019 as typical cases, through coding analysis, scenario evolution factors of waste NIMBY crisis are established. Furtherly, three key scenarios were obtained, namely, external situation (E), situation state (S), emergency management (M), what is more, scenario evolution law of waste NIMBY crisis is revealed. Then, the dynamic Bayesian network theory is used to construct the dynamic scenario evolution network of waste NIMBY crisis. Finally, based on the above models, Xiantao waste NIMBY crisis is taken as a case study, and the dynamic process of scenario evolution network is visually displayed by using Netica. The simulation results show that the scenario evolution network of Xiantao waste NIMBY crisis is basically consistent with the actual incident development process, which confirms the effectiveness and feasibility of the model.

scholarly journals Testing Strategies of the In Vitro Micronucleus Assay for the Genotoxicity Assessment of Nanomaterials in BEAS-2B Cells

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1929
Author(s):  
Tereza Cervena ◽  
Andrea Rossnerova ◽  
Tana Zavodna ◽  
Jitka Sikorova ◽  
Kristyna Vrbova ◽  
...  
Keyword(s):  
Cytochalasin B ◽  
Culture Media ◽  
Methodological Approach ◽  
Micronucleus Assay ◽  
Toxicity Testing ◽  
In Vitro Toxicity ◽  
Testing Strategies ◽  
Transmission Electron ◽  
The Impact

The evaluation of the frequency of micronuclei (MN) is a broadly utilised approach in in vitro toxicity testing. Nevertheless, the specific properties of nanomaterials (NMs) give rise to concerns regarding the optimal methodological variants of the MN assay. In bronchial epithelial cells (BEAS-2B), we tested the genotoxicity of five types of NMs (TiO2: NM101, NM103; SiO2: NM200; Ag: NM300K, NM302) using four variants of MN protocols, differing in the time of exposure and the application of cytochalasin-B combined with the simultaneous and delayed co-treatment with NMs. Using transmission electron microscopy, we evaluated the impact of cytochalasin-B on the transport of NMs into the cells. To assess the behaviour of NMs in a culture media for individual testing conditions, we used dynamic light scattering measurement. The presence of NMs in the cells, their intracellular aggregation and dispersion properties were comparable when tests with or without cytochalasin-B were performed. The genotoxic potential of various TiO2 and Ag particles differed (NM101 < NM103 and NM302 < NM300K, respectively). The application of cytochalasin-B tended to increase the percentage of aberrant cells. In conclusion, the comparison of the testing strategies revealed that the level of DNA damage induced by NMs is affected by the selected methodological approach. This fact should be considered in the interpretation of the results of genotoxicity tests.

Sign in / Sign up

Export Citation Format

Share Document