scholarly journals Physical and chemical characterization and bioactive compounds from blackberry under calcium chloride application

2019 ◽  
Vol 42 ◽  
pp. e42449 ◽  
Author(s):  
Joyce Helena Modesto ◽  
Jackson Mirellys Azevedo Souza ◽  
Rafael Augusto Ferraz ◽  
Marcelo Souza Silva ◽  
Magali Leonel ◽  
...  
Keyword(s):  
Calcium Chloride ◽  
Block Design ◽  
Fruit Size ◽  
Chemical Characterization ◽  
Ascorbic Acid Content ◽  
Calcium Content ◽  
Soluble Solids ◽  
Production Chain ◽  
Randomized Block Design ◽  
Physical And Chemical

Calcium chloride application on fruits maintains the firmness of fruits, decreases storage breakdown and rot, extends shelf-life, and increases vitamin C and calcium content. Blackberries have low post-harvest durability due to the intrinsic characteristics of their fruits, mainly the high respiratory rate and low firmness, which causes problems in the production chain of fresh fruits. The current study aimed to evaluate the effects of pre-harvest application of calcium chloride on the fruits of ‘Tupy’ blackberry (Rubus spp.). A randomized block design for a factorial scheme was used, i.e. calcium chloride concentrations (0, 1.5, 3, and 4.5%) and number of applications (1, 2, and 3). Multiple applications occurred between 5-day intervals. The results showed that the calcium content in the fruits increased with a single application of 2.2%, but a decrease in mass loss was observed with a 4.5% application. The results also indicated great firmness and ascorbic acid content of fruits of ‘Tupy’ blackberry, in addition to the significant increase in fruit size and mass. However, in general, the content of soluble solids, sugars, antioxidant activity and total polyphenols decreased.

scholarly journals Studi Karakter Mutu Buah Pepaya IPB

2016 ◽  
Vol 1 (1) ◽  
pp. 17 ◽  
Author(s):  
Ketty Suketi ◽  
Roedhy Poerwanto ◽  
Sriani Sujiprihati ◽  
, Sobir ◽  
Winarso D.Widodo
Keyword(s):  
Ascorbic Acid ◽  
Block Design ◽  
Ascorbic Acid Content ◽  
Chemical Characteristic ◽  
Carotenoid Content ◽  
Fruit Peel ◽  
Randomized Block Design ◽  
Main Plot ◽  
Two Stages ◽  
Physical And Chemical

<p>ABSTRACT</p><p><br />The objective of the experiment was to investigate the physical and chemical characteristic of eight genotypes of papaya i.e. IPB1, IPB 2A, IPB 3, IPB 3A, IPB 4, IPB 7, IPB 8, and IPB 9 on two stages of ripening period based on percentage of the yellow area of fruit peel (75% yellow and 100% yellow). The fruits were <br />picked at 25% yellow of fruit peel colour. The experiment was conducted in split plot wi th completely randomized block design. The main plot was ripening periods of 75% and 100% ripe, while the genotypes were taken at subplot. There was no significant different on physical and chemical characteristics between papaya at stadium 75% and 100% yellow. Flesh firmness of IPB 9 was better than IPB 1, IPB 4 and IPB 8. Ascorbic acid content of IPB 4 (107.36 mg/100 g) was higher than that of IPB 2A and IPB 3A. Carotenoid content of IPB 4 (29. 73 mg/100g) was higher than that of the other genotypes.</p><p><br />Key words: Carica papaya, physical characteristic, chemical characteristic, ascorbic acid, carotenoid</p>

scholarly journals SELECTION VIA MIXED MODELS IN SEGREGATING GUAVA FAMILIES BASED ON YIELD AND QUALITY TRAITS

2017 ◽  
Vol 39 (2) ◽  
Author(s):  
SILVANA SILVA RED QUINTAL ◽  
ALEXANDRE PIO VIANA ◽  
BIANCA MACHADO CAMPOS ◽  
MARCELO VIVAS ◽  
ANTONIO TEIXEIRA DO AMARAL JÚNIOR
Keyword(s):  
Block Design ◽  
Total Yield ◽  
Ascorbic Acid Content ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Pulp Yield ◽  
Individual Level ◽  
Selection Accuracy ◽  
Randomized Block Design ◽  
Solids Content

ABSTRACT Aiming at the generation of new guava varieties with superior attributes, we conducted this study adopting the REML/BLUP procedure at individual level. Seventeen segregating guava families were evaluated in a randomized-block design with two replicates and 12 plants per plot. Families were obtained after controlled biparental pollination. The studied individuals showed high genotypic variance for fruit weight (FW), total yield (YLD), and ascorbic acid content (AAC). The heritability coefficients of the mean of progenies led to high progeny-selection accuracy for pulp yield (PY), soluble solids content (SSC), in addition to FW, YLD, and AAC; moderate accuracy for fruit acidity (FA) and SSC/FA ratio; and low accuracy for mesocarp thickness (MT) and pH. Selection among families (h2mp) indicated the highest values for FW, PY, YLD, SSC, and AAC, revealing that, for the present study, this practice would be effective, since these traits allowed for the highest selection accuracy values among families. As for the ranking of individuals, families originating from crosses UENF 1835 × UENF 1834, UENF 1831 × UENF 1832, and UENF 1831 × UENF 3739 stood out, occupying the first positions for most traits.

scholarly journals Effect of Foliar Application of Macro and Micronutrients on Quality of Kinnow Mandarin

2020 ◽  
pp. 27-33
Author(s):  
Reetika . ◽  
G. S. Rana ◽  
Komal . ◽  
Pooja . ◽  
M. K. Rana
Keyword(s):  
Ascorbic Acid ◽  
Foliar Application ◽  
Block Design ◽  
Ascorbic Acid Content ◽  
Quality Parameters ◽  
Soluble Solids ◽  
Randomized Block Design ◽  
Acid Ratio ◽  
Kinnow Mandarin ◽  
Juice Content

Aims: To determine the suitable combination of fertilizers for obtaining high quality fruits from Kinnow orchard. Study Design: The experiment was conducted in randomized block design with three replications per treatment on Kinnow mandarin. Place and Duration of Study: The experiment was conducted on seven years old earmarked plants at Experimental Orchard and in Post-harvest Technology Laboratory of the Department of Horticulture, CCS Haryana Agricultural University, Hisar, Haryana, India during the year 2016-17. Methodology: The treatments comprising of 11 combinations of Urea, K2SO4, ZnSO4, FeSO4 and boric acid which were laid out in randomized block design with three replications. Seven years old uniformly grown trees spaced at 6x6 m were selected for the present study and analyzed for yield and quality parameters such astotal soluble solids (%), acidity (%), ascorbic acid (mg/100 ml juice), juice content (%), TSS to acid ratio etc. Results: In comparison to other fertilizers combinations, the maximum fruit yield per plant (97.83 kg/plant), juice content (49.47%), total soluble solids (9.80%), TSS to acid ratio (11.95) and ascorbic acid content (32.30mg/100ml) and minimum acidity (0.83%), rag (24.00%) and peel content (25.60%) and peel thickness (3.42 mm) were registered with foliar application of Urea 1.0% + K2SO4 1.0% + ZnSO4 0.5% + FeSO4 0.5% + H3BO3 0.2%, however, the foliar spray of Urea, K2SO4, ZnSO4, FeSO4 and boric acid had no effect on number of seeds per fruit in Kinnow mandarin. Thus it is clear from results that foliar nutrient application showed a stimulating influence on yield and quality parameters of Kinnow fruits. Conclusion: From the research findings it can be concluded that the maximum potential of Kinnow mandarin plants in respect of fruit yield per plant, juice content, total soluble solids, TSS to acid ratio and ascorbic acid content was exploited to a maximum level and the acidity, rag and peel content and peel thickness to a minimum level with foliar application of Urea 1.0% + K2SO4 1.0% + ZnSO4 0.5% + FeSO4 0.5% + H3BO3 0.2%.

scholarly journals Fruit size, mineral composition and quality of trickle-irrigated tomatoes as affected by potassium rates

2000 ◽  
Vol 35 (1) ◽  
pp. 21-25 ◽  
Author(s):  
Paulo Cezar Rezende Fontes ◽  
Regynaldo Arruda Sampaio ◽  
Fernando Luiz Finger
Keyword(s):  
Mineral Composition ◽  
Block Design ◽  
Large Diameter ◽  
Fruit Size ◽  
Beta Carotene ◽  
Soluble Solids ◽  
Potassium Fertilizer ◽  
Randomized Block Design ◽  
Fertilizer Rates

An experiment was conducted to determine the fruit size, mineral composition and quality of trickle-irrigated tomatoes as affected by potassium fertilizer rates. Six potassium (K) rates were applied as KCl, corresponding to 0, 48.4, 118.6, 188.8, 259.0 and 399.4 kg ha-1, with four replicates, following a randomized block design. Quadratic responses to K rates were observed for double extra large (diameter > 60 mm), extra large (56 to 60 mm) and large (52 to 56 mm) fruit yields. Maximum yields of these classes were achieved with K rates of 116, 190 and 233 kg ha-1, respectively. Fruit dry matter, phosphorus, sulfur and magnesium contents were not affected by K rates, but nitrate and K contents showed significant increments as K rates were increased. Vitamin C, total soluble solids, lycopene and beta-carotene contents in the fruits were not affected by K rates. Increments in the K rate lowered the fruit pH and increased total acids content.

scholarly journals Phenotypic correlation between leaf characters and physical and chemical aspects of cv. Vitória pineapple fruit

2018 ◽  
Vol 40 (2) ◽  
Author(s):  
Ivanildo Schmith Küster ◽  
Rodrigo Sobreira Alexandre ◽  
Sara Dousseau Arantes ◽  
Edilson Romais Schmildt Schmildt ◽  
Lucio de Oliveira Arantes ◽  
...  
Keyword(s):  
Block Design ◽  
Titratable Acidity ◽  
Leaf Length ◽  
Soluble Solids ◽  
Phenotypic Correlation ◽  
Chemical Characteristics ◽  
Physical And Chemical Characteristics ◽  
The North ◽  
Randomized Block Design ◽  
Physical And Chemical

Abstract By considering the few studies related to pineapple cv. Vitória, to know the relationships between the physical and chemical characteristics of the fruits, and they with the “D” leaf, is fundamental. The objective of this work was to evaluate the relationships between “D” leaf, with the physical and chemical characteristics of fruits of pineapple cv. Vitória, under the edaphoclimatic conditions in the North of the State of Espírito Santo. The experiment was carried out in a complete randomized block design in split-plot arrangement with four replications. The data obtained from 433 individually evaluated fruits were analyzed, as it follows: 84 at planting in July and induction at 8 months; 98 at planting in July and induction at 10 months; 84 at planting in July and induction at 12 months; 59 at planting in September and induction at 8 months; 50 at planting in September and induction at 10 months; 58 at planting in September and induction at 12 months. Pearson’s correlation was performed between the characteristics of “D” leaf (length and width) and the physical and chemical aspects of fruits (mass of the fruits with and without crown, fruit length and diameter, pulp volume, translucent area, soluble solids and titratable acidity) for the six treatments. Most of the relationships among the 11 characteristics evaluated were of low magnitude in the six treatments, but correlations of high magnitude and practical application of interest to plant scientists, breeders, farmers and consumers were found. The length and width of the “D” leaf should not be used as indicators of physical and chemical qualities of cv. Vitória. Fruits with higher mass, with or without crown or larger width or diameter present higher pulp content. Fruits with higher mass, with or without crown have lower content of soluble solids.

scholarly journals Tomato progenies selection in Rondônia, Brazil

2019 ◽  
Vol 37 (1) ◽  
pp. 106-111
Author(s):  
Maria José Marques ◽  
Juliana de Fátima Vizú ◽  
Danilo F da Silva Filho ◽  
César Augusto Ticona-Benavente
Keyword(s):  
Significant Variation ◽  
Fruit Set ◽  
Block Design ◽  
Fruit Size ◽  
Seed Mass ◽  
The State ◽  
Soluble Solids ◽  
Randomized Block Design ◽  
Pericarp Thickness ◽  
Fruit Mass

ABSTRACT This study aimed to select endogamic progenies of tomato cv. Yoshimatsu and to conduct a progeny test in the state of Rondônia. The experiment was carried out in a randomized block design with four replicates and eight plants per plot, spacing 1x0.5 m, with one stem. A significant variation was observed among the fifteen progenies for productivity (2.0-5.5 kg plant-1), seed mass with placenta (18-31.5 g fruit-1), number of fruits per plant (18.8-38.7) and soluble solids (3.4-4.2°Brix). No significant variation was noticed for fruit size, pericarp thickness, number of locules, pH, number of flowers and fruit set, though. P6 progeny showed to be the most productive one (110 t ha-1): average fruit mass was 142.5 g, salad type tomato, 7.5 locules, 3.5°Brix, pH 4.2, 60.9 flowers per plant and 64.2% fruit set. Thus, these data show genetic variability of cultivar Yoshimatsu, being possible to obtain lines and/or cultivars with medium to large fruits adapted to the state of Rondônia.

scholarly journals Crop yield and physical and chemical characteristics of acerola clones grown in the Alta Paulista region, Brazil

2021 ◽  
Vol 17 (2) ◽  
pp. 01-08
Author(s):  
Maurício Dominguez Nasser ◽  
Fernanda de Paiva Badiz Furlaneto ◽  
Maria Carolina Diniz Montagnoli ◽  
Loyara Joyce de Oliveira ◽  
José Carlos Cavichioli ◽  
...  
Keyword(s):  
Crop Yield ◽  
Block Design ◽  
Fruit Size ◽  
Soluble Solids ◽  
Pulp Yield ◽  
Chemical Characteristics ◽  
Significance Level ◽  
Physical And Chemical Characteristics ◽  
Physical And Chemical ◽  
Fruit Mass

This paper aimed to evaluate crop yield and physical and chemical characteristics of acerola (Malpighia emarginataSessé & Mociño ex DC) clones grown in the Alta Paulista region, Brazil. The evaluationcomprised 7 clones, namely: Olivier, BRS 238-Frutacor, BRS 236-Cereja, BRS 235-Apodi, BRS 237-Roxinha, Okinawa,and Waldy-CATI 30, studiedfrom October 2018 to April 2019. Crop yield was analyzed based on the accumulated production of 12 harvests, withfresh massexpressedin kg fruit·plant-1. Considering the capacity of30 harvests per plant within thecomplete croppingperiod, total fruit mass (in kg fruit·plant-1) and crop yield (in tha-1) were estimated. Samples were collected from 4 of the 12 harvests in order to determineaverage fruit mass (g); average fruit size, fruitheight/diameter ratio, and pulp yield (%). Regarding fruit pulp, the analysis consisted of quantifying the soluble solids, expressed in degrees Brix, and the technological index (i.e. pulp yield x °Brix/100). The experiment was conducted in a randomized block design, with 7 treatments and 4 repetitions. The obtained data were statistically processed by analysis of variance using the F test, and the means were compared using the Tukey’stest at the 0.05 significance level. The study concluded that, given the soil and weather conditions of the Alta Paulistaregion, Olivier, Apodi and Frutacor are the clones mainly recommended for the agro-industrial market, being the Olivier cultivar the first option among the three and appearing in a greater proportion in the area of the commercial orchard studied. Regarding the acerola production for fresh consumption, Olivier and Roxinha are the most suitable clones. Olivier stands out for its good fruit yield, adequate physical and chemical characteristics, and easy manual harvesting.

scholarly journals Can Sustained Deficit Irrigation Save Water and Meet the Quality Characteristics of Mango?

Agriculture ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 448
Author(s):  
Leontina Lipan ◽  
Aarón A. Carbonell-Pedro ◽  
Belén Cárceles Rodríguez ◽  
Víctor Hugo Durán-Zuazo ◽  
Dionisio Franco Tarifa ◽  
...  
Keyword(s):  
Irrigation Water ◽  
Deficit Irrigation ◽  
Block Design ◽  
Water Productivity ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Total Phenolic ◽  
Drought Tolerant ◽  
Randomized Block Design ◽  
Peel Color

Mango is one of the most cultivated tropical fruits worldwide and one of few drought-tolerant plants. Thus, in this study the effect of a sustained deficit irrigation (SDI) strategy on mango yield and quality was assessed with the aim of reducing irrigation water in mango crop. A randomized block design with four treatments was developed: (i) full irrigation (FI), assuring the crop’s water needs, and three levels of SDI receiving 75%, 50%, and 33% of irrigation water (SDI75, SDI50, and SDI33). Yield, morphology, color, titratable acidity (TA), total soluble solids (TSS), organic acids (OA), sugars, minerals, fiber, antioxidant activity (AA), and total phenolic content (TPC) were analyzed. The yield was reduced in SDI conditions (8%, 11%, and 20% for SDI75, SDI50, and SDI33, respectively), but the irrigation water productivity was higher in all SDI regimes. SDI significantly reduced the mango size, with SDI33 generating the smallest mangoes. Peel color significantly changed after 13 days of ripening, with SDI75 being the least ripe. The TA, AA, and citric acid were higher in SDI75, while the TPC and fiber increased in all SDI levels. Consequently, SDI reduced the mango size but increased the functionality of samples, without a severe detrimental effect on the yield.

scholarly journals HISTOLOGICAL ANALYSIS AND PERFORMANCE OF SOUR PASSION FRUIT POPULATIONS UNDER DIFFERENT ROOTSTOCKS RESISTANT TO Fusarium spp

2018 ◽  
Vol 40 (1) ◽  
Author(s):  
Moisés Ambrósio ◽  
Willian Krause ◽  
Celice Alexandre Silva ◽  
Laís Alves Lage ◽  
Natan Ramos Cavalcante ◽  
...  
Keyword(s):  
Histological Analysis ◽  
Block Design ◽  
Welding Process ◽  
Anatomical Study ◽  
Optical Microscope ◽  
Passion Fruit ◽  
Randomized Block Design ◽  
Physical And Chemical ◽  
Sour Passion Fruit

ABSTRACT The present study aimed to describe histological traits of the graft welding process and evaluate the effect of rootstocks on the physical and chemical traits and the productivity of sour passion fruit populations. The experiment was arranged in a randomized block design, in a 4x2 + 4 factorial scheme (cultivars / canopy x rootstocks), three replicates and nine plants per plot. Commercial cultivars and populations and Passiflora alata and P. nitida rootstocks, in addition to ungrafted plants were used as canopy. Cleft grafting was the grafting type adopted. Traits analyzed such as productivity and physical and chemical quality of fruits were submitted to analysis of variance and compared by the Tukey test. The canopy morphology was evaluated according to descriptors of the Ministry of Agriculture, Livestock and Supply. Grafting was carried out for each graft/rootstock combination for histological analysis. Sections were obtained by freehand cuts, stained and mounted on semi-permanent slides, examined under optical microscope and photomicrographed. Rootstocks affected the early cultivation and reduced productivity and number of fruits of passion fruit populations. Grafting did not affect the quality of fruits or the canopy morphology. Considering the complete culture cycle, P. alata species is able to be used as rootstock. The anatomical study demonstrates the occurrence of better compatibility in the connection of P. edulis tissues on P. alata, compared to grafting on P. nitida.

scholarly journals Melon fruit yield and quality as a function of doses and times of biostimulant application

2020 ◽  
Vol 9 (7) ◽  
pp. e130973911
Author(s):  
Roberto Cleiton Fernandes de Queiroga ◽  
Zaqueu Lopes da Silva ◽  
Odair Honorato Oliveira de ◽  
Elidayane da Nóbrega Santos ◽  
Higínio Luan Oliveira Silva ◽  
...  
Keyword(s):  
Block Design ◽  
Fruit Production ◽  
Soluble Solids ◽  
Application Time ◽  
Time Of Application ◽  
Yield And Quality ◽  
Randomized Block Design ◽  
Semi Arid Region ◽  
Fruit Mass

The objective of this study was to evaluate the productivity and quality of melon fruits as a function of the dose and time of application of biostimulant in the conditions of the semi-arid region of Paraíba. The experiment was carried out at the Federal University of Campina Grande, campus of Pombal - PB, Brazil, in a randomized block design in a 4 x 5 split plot scheme, with doses of biostimulant (0; 0.5; 1.0; 1, 5 and 2.0 L ha-1) and in the subset of the biostimulant application times (15; 20; 25 and 30 days before harvest - DAC), in four replications. Characteristics related to fruit production and quality were evaluated. There was no interaction between the factors of dose and application time of the biostimulant in any of the evaluated characteristics. Thus, the highest estimated values of number of fruits per plant, fruit mass and total melon production were obtained with the application of doses ranging from 0.9 to 1.5 L ha-1 and at the time of application it varied from 22,5 to 23.6 DAC. The content of soluble solids increased 5.5% when the biostimulant dose of 2.0 L ha-1 was used and 4.4% when the product was applied 15 days before harvest.

Sign in / Sign up

Export Citation Format

Share Document