scholarly journals The Analysis, Discussion and Suggestions for the Mesh Reinforcement Technique of Polymer Mortar Wire Rope

2012 ◽  
Vol 5 ◽  
pp. 271-276
Author(s):  
Shu Ren Zhang ◽  
Zhong Long Li

The mesh reinforcement technique of polymer mortar wire rope is a new reinforcement technique used more in the domestic fittest reinforcement project recent years. Recently, there is no unified technical standards, the detailed practice is not same in practical work. There are big differences among the reinforcement effects. The key issue of wire rope is whether add prestressed or not. If add, how much should be prestressed? The difference of the actual practice and reinforcement effect reflects the understanding gap polymer mortar wire rope of mesh reinforcement technique action principle of the designer. A correct understanding of polymer mortar wire rope of mesh reinforcement technique the mechanism and the objective analysis strengthening effect and actively explore research in engineering application problems have a practical significance to promote the healthy development of the structure strengthening technology.

2021 ◽  
Vol 11 (6) ◽  
pp. 2553
Author(s):  
Sang-Hyun Kim ◽  
Jong-Sup Park ◽  
Woo-Tai Jung ◽  
Jae-Yoon Kang

Various methods for strengthening existing structures have been developed owing to the increase in human and property damages caused by the deterioration of structures. Among the various reinforcing methods, the external prestressing method increases the usability and safety of a structure by directly applying tension to the weak tensile area that suffers the greatest deflection during the structure usage. The external prestressing method is advantageous in reducing cracks caused by the introduced tension and restoration of the deflection. Since the strengthening method is applied to deterioration bridges, the strengthening effect is affected by the condition of the existing structure. However, studies on the strengthening effect according to the degree of deterioration are insufficient. Therefore, the behavior according to the strengthening status was analyzed, and the strengthening effect was identified in this study by simulating the deteriorated bridge, reducing the compressive strength and reinforcement quantity, and conducting a four-point loading test. As a result of the experiment, a reinforcement effect of 215% crack load, 161% yield load, and the difference in behavior according to the reinforcement parameters were confirmed.


2013 ◽  
Vol 664 ◽  
pp. 94-98
Author(s):  
Guang De Zhang

Following deepened exploration and development in Shengli exploration area, seismic data requirements are also getting higher and higher. However, in recent years the difference of Xiaoqing river on both sides have made us know that the importance of this problem. In view of the above, this task is aimed at quaternary shallow of old river course within Xiaoqing River. Our analysis of lithology and sedimentary characteristics are using static cone penetration test and rock core exploration method, and we want to reappear near surface deposition of old river course within Xiaoqing River. The research is close combined with the exploration demand and theoretical study, so it has important theoretical and practical significance.


2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Huan-Hua Xu ◽  
Zhen-Hong Jiang ◽  
Cong-Shu Huang ◽  
Yu-Ting Sun ◽  
Long-Long Xu ◽  
...  

Abstract Background OPD and OPD' are the two main active components of Ophiopogon japonicas in Shenmai injection (SMI). Being isomers of each other, they are supposed to have similar pharmacological activities, but the actual situation is complicated. The difference of hemolytic behavior between OPD and OPD' in vivo and in vitro was discovered and reported by our group for the first time. In vitro, only OPD' showed hemolysis reaction, while in vivo, both OPD and OPD' caused hemolysis. In vitro, the primary cause of hemolysis has been confirmed to be related to the difference between physical and chemical properties of OPD and OPD'. In vivo, although there is a possible explanation for this phenomenon, the one is that OPD is bio-transformed into OPD' or its analogues in vivo, the other one is that both OPD and OPD' were metabolized into more activated forms for hemolysis. However, the mechanism of hemolysis in vivo is still unclear, especially the existing literature are still difficult to explain why OPD shows the inconsistent hemolysis behavior in vivo and in vitro. Therefore, the study of hemolysis of OPD and OPD' in vivo is of great practical significance in response to the increase of adverse events of SMI. Methods Aiming at the hemolysis in vivo, this manuscript adopted untargeted metabolomics and lipidomics technology to preliminarily explore the changes of plasma metabolites and lipids of OPD- and OPD'-treated rats. Metabolomics and lipidomics analyses were performed on ultra-high performance liquid chromatography (UPLC) system tandem with different mass spectrometers (MS) and different columns respectively. Multivariate statistical approaches such as principal component analysis (PCA) and orthogonal partial least square-discriminant analysis (OPLS-DA) were applied to screen the differential metabolites and lipids. Results Both OPD and OPD' groups experienced hemolysis, Changes in endogenous differential metabolites and differential lipids, enrichment of differential metabolic pathways, and correlation analysis of differential metabolites and lipids all indicated that the causes of hemolysis by OPD and OPD' were closely related to the interference of phospholipid metabolism. Conclusions This study provided a comprehensive description of metabolomics and lipidomics changes between OPD- and OPD'-treated rats, it would add to the knowledge base of the field, which also provided scientific guidance for the subsequent mechanism research. However, the underlying mechanism require further research.


2020 ◽  
pp. 350-360
Author(s):  
V. Bolshakov ◽  
Yu. Maznichenko ◽  
Yu. Holub ◽  
M. Molyboha ◽  
I. Samoilenko

The systematic analysis of the world experience of civilian use of knives not as cold weapons showed that at present the knife did not become the main attribute of equipping tourists, fish men and even hunters. In particular, today there are very few types of hunting, during which the knife is used to finish off the beast or to protect against it. At the same time, as the practice of hunting management proves, during hunting there are many uses for the knife, even without considering it as a means for cooking. This, in particular, sharpening various stakes (for a tent, a hut, a campfire), skinning a game, preparing chips for a fire, scraping ice from skis or marsh mud from shoes. To do this, in accordance with current state technical standards, any folding knife must have a lock, and the blades of all knives must be of sufficient thickness so as not to break from the load. Handles of hunting knives should be comfortable to hold so that your hand will not get tired during long-term work. For all knives, according to the technical requirements, the length and thickness of the blade must be consistent, as well as the angle of inclination of the tip relative to the axis of the blade. With regard to the above, an interesting example is the collection of knives by the Swedish company Eriksson, consisting of four models, made in the configuration of the Swedish finca. The knives have a handle and a blade of a classic Finnish knife, but with a one-sided stopper. Their blades, depending on the color of the handle, are made of different types of steel. Knives with blue plastic handles have stainless steel blades, and knives with red handles are made of carbon steel. It is believed that in Sweden almost every construction worker walks with such a knife in his pocket. It should be noted that according to the current method of forensic investigation of cold weapons and structurally similar products in it, these knives can be attributed to cold weapons by the size of the blade. It is also interesting an urban-type knife, which is not a cold weapon of the Worden Tactical Medium Company. Renowned wizard Kelly Warden, an instructor for American Rangers, designs this knife. Since 2001, Kelly Warden has been the main consultant on impact and blade weapons of Detachment 1 of the US Special Forces. He trains Special Forces hand-to-hand combat with the use of a knife, machete, baton, sticks, as well as the method of forceful detention. The blade length of the knife described is 74 mm, thickness – 3.8 mm; the handle has a sub-finger protrusion to prevent the arm from slipping on the blade. The knife does not have a standard stopper, which, in addition to protecting it from slipping the hand on the blade, must prevent the hand from sinking into the victim’s body. By all measures, this knife is not a cold weapon in accordance with the requirements of the criminal law of Ukraine. Kelly Warden believes that the knife as a means of self-defense levels the difference in weight, height and physical strength, but its main drawback is its damaging ability. The proposed article is devoted to this circumstance, the definition of the role of the restrictor in classifying a knife as a cold weapon.


2019 ◽  
Vol 9 (10) ◽  
pp. 2096 ◽  
Author(s):  
Bin Peng ◽  
Sandong Wei ◽  
Libo Long ◽  
Qizhen Zheng ◽  
Yueqiang Ma ◽  
...  

Strengthening historical brick masonry walls is important because these walls are major load-bearing members in many architectural heritages. However, historical brick masonry has low elastic modulus and low strength, historical masonry walls are prone to surface treatment or other structural intervention, and some of the walls lack integrity. These characteristics make effective strengthening of historical masonry walls difficult. To address the issue, strengthening layers made up of ultra-high performance concrete (UHPC) are potentially useful. To investigate the strengthening effect of the UHPC layers, the authors constructed three squat walls using historical bricks and mortar collected from the rehabilitation site of a historical building, and strengthened two of the walls with a UHPC layer and a reinforced polymer mortar layer respectively. The three walls were broken down by horizontal cyclic force along with constant vertical compression, and then the unstrengthened one was strengthened in-situ by a UHPC layer and was tested again. The experimental results indicate that the UHPC layers significantly improved the in-plane shear resistance and cracking load of the squat walls, without decreasing the walls’ ultimate deformation. They effectively strengthened both moderately and severely damaged historical masonry walls, because the UHPC filled the existing damages and improved the integrity of the masonry substrate. In addition, the UHPC layers intervened the historical walls less than the reinforced polymer mortar layer. Therefore, the UHPC layers are efficient in strengthening historical squat masonry walls.


2020 ◽  
Vol 10 (21) ◽  
pp. 7906
Author(s):  
Marina Bonomolo ◽  
Patrizia Ribino ◽  
Gianpaolo Vitale

The paper proposes a new methodological approach for evaluating the comfort condition using the concept of explainable post occupancy to make the user aware of the environmental state in which (s)he works. Such an approach was implemented on a humanoid robot with social capabilities that aims to enforce human engagement to follow recommendations. The humanoid robot helps the user to position the sensors correctly to acquire environmental measures corresponding to the temperature, humidity, noise level, and illuminance. The distribution of the last parameter due to its high variability is also retrieved by the simulation software Dialux. Using the post occupancy evaluation method, the robot also proposes a questionnaire to the user for collecting his/her preferences and sensations. In the end, the robot explains to the user the difference between the suggested values by the technical standards and the real measures comparing the results with his/her preferences and perceptions. Finally, it provides a new classification into four clusters: true positive, true negative, false positive, and false negative. This study shows that the user is able to improve her/his condition based on the explanation given by the robot.


2007 ◽  
Vol 24 (1) ◽  
pp. 71-73 ◽  
Author(s):  
Harry V. Wiant ◽  
John R. Brooks

Abstract The difference between the use of the arithmetic and geometric means for estimation of average stump diameter, stump cross-sectional area and estimated tree volume was investigated using measurements from 739 stumps from an Appalachian hardwood stand located in central West Virginia. Although average stump diameter, cross-sectional area, and tree volumes were statistically different between estimates based on the arithmetic and geometric mean diameter, these differences were of little practical significance. The difference in average stem diameter, cross-sectional area, tree cubic volume, and board foot volume were 0.05 in, 0.01 ft2, 0.45 ft3, and 2.41 bd ft, respectively.


1984 ◽  
Vol 35 (5) ◽  
pp. 709 ◽  
Author(s):  
JR Donnelly

Weaning percentage and perinatal mortality of lambs born in late winter or early spring to Merino and Border Leicester x Merino ewes grazing at several stocking rates on lucerne or phalaris-clover pastures were measured over 2 years. Weaning percentages for mature crossbred ewes declined linearly from 136 lambs per 100 ewes joined when stocked at 9 ha-1 to 100 for those at 18 ha-1. For mature Merino ewes, the values were 109 and 70 respectively. Weaning percentages were similar on lucerne and phalaris pastures, although 8% more lambs were born to ewes grazing on phalaris; higher mortality in lambs born as multiples eliminated the difference. Death from exposure during the first 3 days of life was the most important cause of lamb losses. For lambs born as singles to Merino ewes the probability of death from exposure was up to 0.4, and reached 0.6 for lambs born as multiples. For single and multiple lambs born to crossbred ewes equivalent probabilities were 0.25 and 0.4 respectively. These probabilities were reduced if maternal weight was high at lambing, the reduction being of practical significance in very cold weather, particularly if the proportion of multiple births was high. Under mild conditions, where the probability of death from exposure was low, reductions in mortality from high ewe weight at lambing were of little consequence. Long-term weather records kept at the experimental site near Canberra show that a high risk of death in new-born lambs is likely from early June to mid-September. Throughout this period deaths from exposure could be expected to exceed 30% in lambs born as multiples to Merino ewes.


2020 ◽  
Vol 10 (21) ◽  
pp. 7525
Author(s):  
Zhehao Lu ◽  
Wenyuan Yan ◽  
Pengfei Yan ◽  
Biao Yan

The objective of the study is to investigate the strengthening mechanism of embedded meta-precipitates in the design of architected metamaterials. Four precipitate-type architected metamaterials are designed and prepared by fused deposition modelling (FDM). The difference of mechanical properties and deformation mode of these structures is analyzed. The strengthening effect of the introduced meta-precipitates is then compared with Orowan bypass strengthening mechanism. The similarities and discrepancies of metallurgical hardening principles and that found in architected metamaterials are established. It is found that due to the introduction of embedded meta-precipitates, the deformation of the structure changes significantly from diagonal crushing to a meander route, thus improves the mechanical properties and energy absorption abilities. The hindering effect and the influence of volume fraction of meta-precipitates is similar to Orowan bypass mechanism.


Sign in / Sign up

Export Citation Format

Share Document