Synthesis and Characterization of Polyaniline Copolymer

2012 ◽  
Vol 217-219 ◽  
pp. 551-554
Author(s):  
Ting Xi Li ◽  
Yu Hua Zhao ◽  
Qian Li ◽  
Cheng Qian Yuan ◽  
Quan Liang Chen ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Infrared Spectroscopy ◽  
Thermogravimetric Analysis ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir ◽  
The Difference ◽  
Thermal Stability Of

Abstract. Polyaniline (PANI) and p-phenylenediamine (p-PDA)-aniline copolymer were prepared via a same microemulsion method. The structures of the PANI and p-PDA-aniline copolymer were characterized by infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis（TGA）. The results revealed the difference of synthesis and characterization between PANI and p-PDA-aniline copolymer. It was shown that structure of the copolymer is almost similar to that of PANI, but the p-PDA-aniline copolymer has a better crystallization than PANI, and the thermal stability of the copolymer is higher than that of pure PANI.

Synthesis and Characterization of Novel Organomodified Nanoclays for Application in Dental Materials

2019 ◽  
Vol >15 (5) ◽  
pp. 512-524 ◽  
Author(s):  
Alexandros K. Nikolaidis ◽  
Elisabeth A. Koulaouzidou ◽  
Dimitris S. Achilias
Keyword(s):  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Thermogravimetric Analysis ◽  
Fourier Transform Infrared Spectroscopy ◽  
Quaternary Ammonium ◽  
Fourier Transform Infrared ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray

Background: Nanoclays incorporated in dental resins have been previously investigated. However, limited reports are associated with nanoclays that exhibit high functionality. Objective: The aim of this study was the targeted synthesis and characterization of organomodified nanoclays with methacrylic groups suitable for incorporation in dental nanocomposite resins. Methods: Quaternary ammonium methacrylates were synthesized and characterized by means of proton nuclear magnetic resonance and Fourier-transform infrared spectroscopy. Consequently, they were inserted into the interlayer space of nanoclay through a cation exchange reaction, while silane was also used for simultaneous surface modification. The produced organomodified nanoclays were characterized by means of X-ray diffraction, Fourier-transform infrared spectroscopy and thermogravimetric analysis. Results: Fourier-transform infrared spectra confirmed the successful synthesis of the quaternary ammonium methacrylates. X-ray diffraction analysis showed that organoclays exhibited higher d001- values (up to 1.78 nm) compared to raw nanoclay (1.37 nm), indicating an accomplished intercalation in each case. X-ray diffraction spectra mainly disclosed the presence of methacrylic functional groups in all nanoclays. Thermogravimetric analysis curves verified the different thermal stability of organoclays due to the diversity of their organic modifiers. Conclusion: The experimental results showed that nanoclay was successfully modified with ammonium methacrylates and silane. Τhe combination of X-ray diffraction and thermogravimetric analysis data revealed a high degree of intercalation and methacrylated organic loading as well. These phenomena may favor a good dispersion and high polymerization degree of nanoclays with dental resin monomers, rendering them potentially useful materials for the development of advanced dental nanocomposites resins.

Synthesis and Characterization of Multi-Functional Substituted POSS

2012 ◽  
Vol 554-556 ◽  
pp. 227-230
Author(s):  
Li Ying Zhang ◽  
Xiao Jing Zhao ◽  
Ping Chen ◽  
Sheng Di Fan
Keyword(s):  
Thermal Stability ◽  
Nuclear Magnetic Resonance ◽  
Synthesis And Characterization ◽  
Wide Angle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Good Thermal Stability ◽  
Elementary Analysis ◽  
Thermal Stability Of

Five different multifunctional nitro octaphenyl silsesquioxane (NPS) were Synthesised and reduction was carried out to obtain amino octaphenyl silsesquioxane(APS). These compounds were characterized with elementary analysis, fourier transform infrared(FTIR), nuclear magnetic resonance (NMR, 29Si), wide-angle X-ray diffraction(XRD) and thermogravimetry (TG). Experiental results showed that the longer the nitration time, the more nitro connected to the OPS, but not positively, nitro number remained unchanged after five hours. NPS has good thermal stability than corresponding APS under 450°C, and the thermal stability of APS are decrease with the increase of amino number.

One Step Synthesis and Characterization of Zirconia-Graphene Composites

2012 ◽  
Vol 600 ◽  
pp. 174-177 ◽  
Author(s):  
Jian Fei Xia ◽  
Zong Hua Wang ◽  
Yan Zhi Xia ◽  
Fei Fei Zhang ◽  
Fu Qiang Zhu ◽  
...  
Keyword(s):  
Synthesis And Characterization ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Composite ◽  
Transmission Electron ◽  
One Step ◽  
Ft Ir ◽  
Xrd Techniques

Zirconia-graphene composite (ZrO2-G) has been successfully synthesized via decomposition of ZrOCl2•6H2O in a water-isopropanol system with dispersed graphene oxide (GO) utilizing Na2S as a precursor could enable the occurrence of the deposition of Zr4+ and the deoxygenation of GO at the same time. Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques were used to characterize the samples. It was found that graphene were fully coated with ZrO2, and the ZrO2 existing in tetragonal phase, which resulted in the formation of two-dimensional composite.

Study of Thermal Behaviour of EPDM/SBR Blends and Carbon Nanocoatings Deposited by Sputtering

2021 ◽  
Vol 875 ◽  
pp. 116-120
Author(s):  
Muhammad Alamgir ◽  
Faizan Ali Ghauri ◽  
Waheed Qamar Khan ◽  
Sajawal Rasheed ◽  
Muhammad Sarfraz Nawaz ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Weight Loss ◽  
Thermogravimetric Analysis ◽  
Thermal Behavior ◽  
Thermal Behaviour ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thermal Stability Of

In this study, the effect of SBR concentration (10 Phr, 20 Phr & 30 Phr ) on the thermal behavior of EPDM/SBR blends was studied. Thermogravimetric analysis (TGA) was used to check weight loss of samples as function of temperature by heating upto 600°C. X-ray diffraction (XRD) was performed to determine quality and % crystallinity of the elastomer blends. It was seen that % crystallinity improved with an increase in the content of SBR in EPDM/SBR blends. TGA revealed that the thermal stability of EPDM/SBR blends has improved by 17% than neat EPDM. Carbon nano-coatings produced by sputtering have no beneficial influence on thermal behaviour of elastomers.

Synthesis and Characterization of Some Functional Luminol Derivatives with Aromatic Substituted Groups

2011 ◽  
Vol 197-198 ◽  
pp. 606-609 ◽  
Author(s):  
Ti Feng Jiao ◽  
Yuan Yuan Xing ◽  
Jing Xin Zhou ◽  
Wei Wang
Keyword(s):  
Molecular Structure ◽  
Thermal Stability ◽  
Molecular Structures ◽  
Synthesis And Characterization ◽  
Functional Material ◽  
Aromatic Substituent ◽  
The Difference ◽  
Imide Group ◽  
Thermal Stability Of

Some functional luminol derivatives with aromatic substituted groups have been designed and synthesized from the reaction of the corresponding aromatic acyl chloride precursors with luminol. It has been found that depending on the size of aromatic groups, the formed luminol derivatives showed different properties, indicating distinct regulation of molecular skeletons. UV and IR data confirmed commonly the formation of imide group as well as aromatic segment in molecular structures. Thermal analysis showed that the thermal stability of luminol derivatives with p-phthaloyl segment was the highest in those derivatives. The difference of thermal stability is mainly attributed to the formation of imide group and aromatic substituent groups in molecular structure. The present results have demonstrated that the special properties of luminol derivatives can be turned by modifying molecular structures of objective compounds with proper substituted groups, which show potential application in functional material field and ECL sensor.

Preparation and Electrical Characterization of Poly(Aniline) NanoClay Composites

2015 ◽  
Vol 34 (4) ◽  
Author(s):  
Esma Ahlatcioǧlu ◽  
Bahire Filiz şenkal ◽  
Mustafa Okutan
Keyword(s):  
Electrical Characterization ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Inorganic Hybrid ◽  
X Ray ◽  
Ft Ir ◽  
Doped Polyaniline ◽  
Poly Aniline ◽  
Scanning Electron

AbstractIn this work, synthesis and characterization of composite materials based on NanoClay(NC) and boric acid doped PolyAniline (PANI) is studied. PANI was successfully incorporated into NC to form PANI-NC composites. The resulting organic-inorganic hybrid material, PANI-NC was characterized by various physicochemical techniques. Formation of PANI inside the clay tactoid has been confirmed by X-ray diffraction studies (XRD), scanning electron microscope (SEM) and FT-IR. Also, conductivity and physical properties of the PANI-NC composites were investigated.

Synthesis and Characterization of a Novel Hyperbranched Poly(Diethynylbenzene-Silane)

2012 ◽  
Vol 560-561 ◽  
pp. 174-178
Author(s):  
Yan Zou ◽  
Hui Min Qi ◽  
Mei Ling Xu ◽  
Fa Rong Huang ◽  
Lei Du
Keyword(s):  
Thermal Stability ◽  
Grignard Reagent ◽  
Synthesis And Characterization ◽  
Polycondensation Reaction ◽  
Degree Of Branching ◽  
H Nmr ◽  
Hyperbranched Poly ◽  
Ft Ir ◽  
Thermal Stability Of

Hyperbranched poly(diethynylbenzene-silane) (hb-PDEBS) was synthesized through polycondensation reaction of diethynylbenzene Grignard reagent (A2) and trichlorosilane (B3), and its structure was characterized by FT-IR, 1H-NMR, GPC and Elemental Analysis. The degree of branching of hb-PDEBS was defined by 29Si-NMR and calculated to be about 0.68. The curing behavior of hb-PDEBS was investigated by DSC. Thermal stability of cured hb-PDEBS was examined by TGA, and its residue at 1000°C under nitrogen was 80.6%. Hb-PDEBS displayed a strong absorption due to π-π* transition and exhibited the most intensity structured emission with a maximum around 500 nm.

Synthesis and Characterization of Polythiophene / SBA-15 Composite

2014 ◽  
Vol 968 ◽  
pp. 49-52
Author(s):  
Qin Qin Hou
Keyword(s):  
Thermogravimetric Analysis ◽  
Oxidative Polymerization ◽  
Mesoporous Structure ◽  
Synthesis And Characterization ◽  
Scan Electron Micrographs ◽  
X Ray Diffraction ◽  
Channel System ◽  
X Ray ◽  
Adsorption Desorption

A new nanocomposite, semiconducting polythiophene (PT) confined in mesoporous silica (SBA-15) was synthesized. PT was formed in the pores of SBA-15 by subsequent oxidative polymerization with FeCl3. Different techniques were used to characterize the nanocomposite formation. X-ray diffraction (XRD) and N2 adsorption/desorption analysis showed that the nanocomposite possesses mesoporous structure, and the residual pore volume of nanocomposite was significantly lower than that of pure empty SBA-15. Scan electron micrographs confirmed the presence of polythiophene inside pore channels of the host, and thermogravimetric analysis proved confinement effect in the channel system.

Microwave-Hydrothermal Synthesis and Characterization of Graphene

2012 ◽  
Vol 602-604 ◽  
pp. 917-920 ◽  
Author(s):  
Zhen Hui Xiao ◽  
Shui Sheng Wu ◽  
Yan Lin Sun ◽  
Yu Lin Zhao ◽  
Ya Ming Wang
Keyword(s):  
Chemical Reduction ◽  
Visible Spectrum ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Microwave Hydrothermal ◽  
Ft Ir ◽  
Uv Visible ◽  
Scanning Electron

Graphene was synthesized by microwave-hydrothermal chemical reduction of graphite oxide using hydrazine hydrate as the reducing agent. Graphene was characterized using X-ray diffraction, UV-visible spectrum, FT-IR spectrum and scanning electron microscopy. Results indicated that the as-prepared graphene was wrinkled and comprised fewer graphenes with a highly crystalline structure.

Synthesis and Characterization of a Dumbbell-Shaped Polyrotaxane Based on Polytetrahydrofuran bis(3-aminopropyl) Terminated and α-Cyclodextrins Using Polyamidoamine (PAMAM) Dentrimers as Bulky Stoppers

2015 ◽  
Vol 1094 ◽  
pp. 41-48
Author(s):  
Ri Min Cong ◽  
Huai Qing Yu ◽  
Yan Gong Yang ◽  
Si Yi Yang ◽  
Jiao Li ◽  
...  
Keyword(s):  
Thermogravimetric Analysis ◽  
Inclusion Complex ◽  
Inclusion Complexes ◽  
Synthesis And Characterization ◽  
Wide Angle ◽  
X Ray Diffraction ◽  
X Ray ◽  
H Nmr ◽  
Channel Type

A dumbbell-shaped polyrotaxane based on polytetrahydrofuran bis (3-aminopropyl) terminated and α-cyclodextrins using polyamidoamine (PAMAM) dentrimers as bulky stoppers was successfully prepared. The1H NMR results show that the peaks of α-CDs in these polyrotaxanes are broadened compared with pure α-CDs. Wide-angle X-ray diffraction (XRD) measurements of the resulting polyrotaxanes suggest to produce a channel-type crystalline structure of inclusion complex. Thermogravimetric analysis (TGA) of the resultant polyrotaxanes show that α-CDs are significantly stabilized by the formation of the inclusion complexes.

Sign in / Sign up

Export Citation Format

Share Document