Construction Analysis of the Chimney of Solar Thermal Power Station

2013 ◽  
Vol 283 ◽  
pp. 41-46
Author(s):  
Shao Wen Fang ◽  
Xing Fei Yuan
Keyword(s):  
Large Scale ◽  
Thermal Power ◽  
Load Condition ◽  
Initial Imperfection ◽  
Internal Force ◽  
Construction Process ◽  
Buckling Mode ◽  
A Value ◽  
Gravity Load ◽  
The Stability

A 100MW solar chimney is high as one thousand meters, belonging to ultra-high-rise structure. Considering the complicated load condition, the large scale and long period of construction process, construction analysis is important to the structure. Using element birth and death technology in ANSYS, the whole construction process is simulated in this paper. Numerical results indicate that the deformation and internal force of the structure change a lot during the construction process. Great differences exist in property and magnitude between construction status and design status. To investigate the stability of the structure under wind and gravity load, the first eigen buckling mode with a value of L/300 and construction deformation are considered as initial imperfection respectively. The results show the ultimate bearing capacity of the structure considering construction deformation is lower than that considering the first-order initial imperfection.

The Influence of Stochastic Imperfection Field on the Bearing Capacity of Hyperbolic Cooling Towers

2011 ◽  
Vol 374-377 ◽  
pp. 2297-2300
Author(s):  
Hai Zhao ◽  
Ya Zhou Xu ◽  
Guo Liang Bai
Keyword(s):  
Bearing Capacity ◽  
Large Scale ◽  
Initial Imperfection ◽  
Orthogonal Basis ◽  
Imperfection Sensitivity ◽  
Stochastic Field ◽  
Buckling Mode ◽  
Material Inhomogeneity ◽  
Initial Imperfections ◽  
Distribution Form

The uncontrollable factors such as construction errors, material inhomogeneity, etc. will inevitably lead to a certain initial imperfections. It is generally known that the stochastic initial imperfection of the structure is an important factor for affecting structural stability and bearing capacity. Since these imperfections are random in nature, this paper proposes the method mainly based on the standard orthogonal basis to expand the stochastic field, taking into account the decomposition of the stochastic initial imperfections related to structures, which is projected in the buckling mode orthogonal basis. In the end, the article by the stability analysis example shows that this method can use less random variables effectively describing the original stochastic imperfection field, and efficiently search for the most unfavorable initial imperfection distribution form in order to ensure the imperfection sensitivity structures have a higher reliability, so it can be applied to large-scale engineering structure stochastic imperfection analysis.

The Numerical Simulation Analysis of Excavation Process of Loess Tunnel

2011 ◽  
Vol 383-390 ◽  
pp. 6594-6600 ◽  
Author(s):  
Jian Guo ◽  
Qi Cai Wang
Keyword(s):  
Numerical Simulation ◽  
Simulation Analysis ◽  
Internal Force ◽  
Design Parameters ◽  
Construction Process ◽  
The Finite Element Method ◽  
Excavation Process ◽  
Internal Forces ◽  
The Stability ◽  
Method Construction

The bench method dynamic construction process of Xin Baotashan tunnel which located in the grade IV surrounding rock is simulated by using the finite element method. The variation of displacement and stress field of the surrounding rocks and the internal force of the lining structures during every excavation step is calculated. The state of the surrounding rocks can be predicted by the numerical simulation results, and the construction plan and construction sequences can be guided by the analysis results. At the same time the reasonability and feasibility of the design parameters can be judged by analyzing the internal forces of the lining structures. Analysis and experimental results showed that the stability of the surrounding rocks is good by using the bench method construction to the IV grade surrounding rocks and the design parameters of the lining structures are feasible.

Evaluation of the Grouting Effect of the Change of Grout Hole Spacing in Splitting Grouting for Dams

2012 ◽  
Vol 151 ◽  
pp. 295-299
Author(s):  
Ke Wu ◽  
Ming Yue Ma
Keyword(s):  
Large Scale ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Stress And Strain ◽  
Dam Construction ◽  
Construction Process ◽  
Distribution Law ◽  
Technological Standard ◽  
The Stability

The technique of splitting grouting for dams is one of the important technical approaches to improve the inner quality of dam construction. However, the construction cost is too high with the current technological standard, which restricts the further promotion of this technology. Based on the assumption that the other conditions of construction process remained unchanged and by obeying the law of interaction between the placement of grout-hole spacing and the actual anti-seepage effect during splitting grouting, Mohr-Coulomb Hardening constitutive model was adopted in this paper on the basis of large-scale finite element numerical algorithm. Through the fluid-solid coupling computation of grout holes of different spacing, the distribution law of various factors during splitting grouting, such as the pore water pressure generated by seriflux and the stress and strain of dam, was studied first. Next, the mechanism of reinforcement and seepage of splitting grouting seriflux in soil body was revealed, and the influence of this mechanism on the stability of dam body was also investigated. Finally, the effect of splitting grouting was evaluated.

scholarly journals Regional Coordination and Security of Water–Energy–Food Symbiosis in Northeastern China

2021 ◽  
Vol 13 (3) ◽  
pp. 1326
Author(s):  
Hongfang Li ◽  
Huixiao Wang ◽  
Yaxue Yang ◽  
Ruxin Zhao
Keyword(s):  
External Environment ◽  
Northeastern China ◽  
Decision Makers ◽  
Human Survival ◽  
A Value ◽  
Natural Factors ◽  
Regional Coordination ◽  
Micro Level ◽  
The Stability ◽  
Coordination Degree

The interactions of water, energy, and food, which are essential resources for human survival, livelihoods, production, and development, constitute a water–energy–food (WEF) nexus. Applying symbiosis theory, the economic, social, and natural factors were considered at the same time in the WEF system, and we conducted a micro-level investigation focusing on the stability, coordination, and sustainability of the symbiotic units (water, energy, and food), and external environment of the WEF system in 36 prefecture-level cities across three northeastern provinces of China. Finally, we analyzed the synergistic safety and coupling coordination degree of the WEF system by the combination of stability, coordination, and sustainability, attending to the coordination relationship and influences of the external environment. The results indicated that the synergistic safety of the WEF system in three northeastern provinces need to equally pay attention to the stability, coordination, and sustainability of the WEF system, since their weights were 0.32, 0.36 and 0.32, respectively. During 2010–2016, the synergistic safety indexes of the WEF system ranged between 0.40 and 0.60, which was a state of boundary safety. In the current study, the coupling coordination degree of the WEF system fluctuated around a value of 0.6, maintaining a primary coordination level; while in the future of 2021–2026, it will decline to 0.57–0.60, dropping to a weak coordinated level. The conclusion could provide effective information for decision-makers to take suitable measures for the security development of a WEF system.

scholarly journals Development and Characterization of Two Types of Surface Displayed Levansucrases for Levan Biosynthesis

Catalysts ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 757
Author(s):  
Huiyi Shang ◽  
Danni Yang ◽  
Dairong Qiao ◽  
Hui Xu ◽  
Yi Cao
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Molecular Weight ◽  
Large Scale ◽  
Surface Display ◽  
Yeast Surface Display ◽  
Fusion Partner ◽  
Whole Cell ◽  
Food Industries ◽  
Yeast Surface ◽  
The Stability

Levan has wide applications in chemical, cosmetic, pharmaceutical and food industries. The free levansucrase is usually used in the biosynthesis of levan, but the poor reusability and low stability of free levansucrase have limited its large-scale use. To address this problem, the surface-displayed levansucrase in Saccharomyces cerevisiae were generated and evaluated in this study. The levansucrase from Zymomonas mobilis was displayed on the cell surface of Saccharomyces cerevisiae EBY100 using a various yeast surface display platform. The N-terminal fusion partner is based on a-agglutinin, and the C-terminal one is Flo1p. The yield of levan produced by these two whole-cell biocatalysts reaches 26 g/L and 34 g/L in 24 h, respectively. Meanwhile, the stability of the surface-displayed levansucrases is significantly enhanced. After six reuses, these two biocatalysts retained over 50% and 60% of their initial activities, respectively. Furthermore, the molecular weight and polydispersity test of the products suggested that the whole-cell biocatalyst of levansucrase displayed by Flo1p has more potentials in the production of levan with low molecular weight which is critical in certain applications. In conclusion, our method not only enable the possibility to reuse the enzyme, but also improves the stability of the enzyme.

scholarly journals Solving the Real Power Limitations in the Dynamic Economic Dispatch of Large-Scale Thermal Power Units under the Effects of Valve-Point Loading and Ramp-Rate Limitations

2021 ◽  
Vol 13 (3) ◽  
pp. 1274
Author(s):  
Loau Al-Bahrani ◽  
Mehdi Seyedmahmoudian ◽  
Ben Horan ◽  
Alex Stojcevski
Keyword(s):  
Large Scale ◽  
Thermal Power ◽  
Optimization Technique ◽  
Economic Dispatch ◽  
Pso Algorithm ◽  
Search Space ◽  
Economic Benefits ◽  
Optimization Techniques ◽  
Ramp Rate ◽  
Dynamic Economic Dispatch

Few non-traditional optimization techniques are applied to the dynamic economic dispatch (DED) of large-scale thermal power units (TPUs), e.g., 1000 TPUs, that consider the effects of valve-point loading with ramp-rate limitations. This is a complicated multiple mode problem. In this investigation, a novel optimization technique, namely, a multi-gradient particle swarm optimization (MG-PSO) algorithm with two stages for exploring and exploiting the search space area, is employed as an optimization tool. The M particles (explorers) in the first stage are used to explore new neighborhoods, whereas the M particles (exploiters) in the second stage are used to exploit the best neighborhood. The M particles’ negative gradient variation in both stages causes the equilibrium between the global and local search space capabilities. This algorithm’s authentication is demonstrated on five medium-scale to very large-scale power systems. The MG-PSO algorithm effectively reduces the difficulty of handling the large-scale DED problem, and simulation results confirm this algorithm’s suitability for such a complicated multi-objective problem at varying fitness performance measures and consistency. This algorithm is also applied to estimate the required generation in 24 h to meet load demand changes. This investigation provides useful technical references for economic dispatch operators to update their power system programs in order to achieve economic benefits.

scholarly journals INTRACISTRONIC MAPPING OF ELECTROPHORETIC SITES IN DROSOPHILA MELANOGASTER: FIDELITY OF INFORMATION TRANSFER BY GENE CONVERSION

Genetics ◽  
1974 ◽  
Vol 76 (2) ◽  
pp. 289-299
Author(s):  
Margaret McCarron ◽  
William Gelbart ◽  
Arthur Chovnick
Keyword(s):  
Drosophila Melanogaster ◽  
Information Transfer ◽  
Large Scale ◽  
Genetic Basis ◽  
Xanthine Dehydrogenase ◽  
Specific Protein ◽  
Wild Type ◽  
Electrophoretic Variation ◽  
The Stability ◽  
Recombination Experiments

ABSTRACT A convenient method is described for the intracistronic mapping of genetic sites responsible for electrophoretic variation of a specific protein in Drosophila melanogaster. A number of wild-type isoalleles of the rosy locus have been isolated which are associated with the production of electrophoretically distinguishable xanthine dehydrogenases. Large-scale recombination experiments were carried out involving null enzyme mutants induced on electrophoretically distinct wild-type isoalleles, the genetic basis for which is followed as a nonselective marker in the cross. Additionally, a large-scale recombination experiment was carried out involving null enzyme rosy mutants induced on the same wild-type isoallele. Examination of the electrophoretic character of crossover and convertant products recovered from the latter experiment revealed that all exhibited the same parental electrophoretic character. In addition to documenting the stability of the xanthine dehydrogenase electrophoretic character, this observation argues against a special mutagenesis hypothesis to explain conversions resulting from allele recombination studies.

scholarly journals Thermally Stimulated Desorption Optical Fiber-Based Interrogation System: An Analysis of Graphene Oxide Layers’ Stability

Photonics ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 70
Author(s):  
Maria Raposo ◽  
Carlota Xavier ◽  
Catarina Monteiro ◽  
Susana Silva ◽  
Orlando Frazão ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Optical Fiber ◽  
Optical Fiber Sensor ◽  
Layer By Layer ◽  
Film Stability ◽  
A Value ◽  
Device Reliability ◽  
Sensor Devices ◽  
Lbl Films ◽  
The Stability

Thin graphene oxide (GO) film layers are being widely used as sensing layers in different types of electrical and optical sensor devices. GO layers are particularly popular because of their tuned interface reflectivity. The stability of GO layers is fundamental for sensor device reliability, particularly in complex aqueous environments such as wastewater. In this work, the stability of GO layers in layer-by-layer (LbL) films of polyethyleneimine (PEI) and GO was investigated. The results led to the following conclusions: PEI/GO films grow linearly with the number of bilayers as long as the adsorption time is kept constant; the adsorption kinetics of a GO layer follow the behavior of the adsorption of polyelectrolytes; and the interaction associated with the growth of these films is of the ionic type since the desorption activation energy has a value of 119 ± 17 kJ/mol. Therefore, it is possible to conclude that PEI/GO films are suitable for application in optical fiber sensor devices; most importantly, an optical fiber-based interrogation setup can easily be adapted to investigate in situ desorption via a thermally stimulated process. In addition, it is possible to draw inferences about film stability in solution in a fast, reliable way when compared with the traditional ones.

scholarly journals A Digital Framework to Predict the Sunshine Requirements of Landscape Plants

2021 ◽  
Vol 11 (5) ◽  
pp. 2098
Author(s):  
Heyi Wei ◽  
Wenhua Jiang ◽  
Xuejun Liu ◽  
Bo Huang
Keyword(s):  
Solar Radiation ◽  
Plant Species ◽  
Large Scale ◽  
Normal Growth ◽  
Adaptive Selection ◽  
Landscape Plant ◽  
Landscape Plants ◽  
The Stability ◽  
Stability And Accuracy ◽  
The City

Knowledge of the sunshine requirements of landscape plants is important information for the adaptive selection and configuration of plants for urban greening, and is also a basic attribute of plant databases. In the existing studies, the light compensation point (LCP) and light saturation point (LSP) have been commonly used to indicate the shade tolerance for a specific plant; however, these values are difficult to adopt in practice because the landscape architect does not always know what range of solar radiation is the best for maintaining plant health, i.e., normal growth and reproduction. In this paper, to bridge the gap, we present a novel digital framework to predict the sunshine requirements of landscape plants. First, the research introduces the proposed framework, which is composed of a black-box model, solar radiation simulation, and a health standard system for plants. Then, the data fitting between solar radiation and plant growth response is used to obtain the value of solar radiation at different health levels. Finally, we adopt the LI-6400XT Portable Photosynthetic System (Li-Cor Inc., Lincoln, NE, USA) to verify the stability and accuracy of the digital framework through 15 landscape plant species of a residential area in the city of Wuhan, China, and also compared and analyzed the results of other researchers on the same plant species. The results show that the digital framework can robustly obtain the values of the healthy, sub-healthy, and unhealthy levels for the 15 landscape plant species. The purpose of this study is to provide an efficient forecasting tool for large-scale surveys of plant sunshine requirements. The proposed framework will be beneficial for the adaptive selection and configuration of urban plants and will facilitate the construction of landscape plant databases in future studies.

Sign in / Sign up

Export Citation Format

Share Document