Inverse Dynamics of 2UPS-RPU Parallel Mechanism by Newton-Euler Formation

2010 ◽  
Vol 29-32 ◽  
pp. 738-743
Author(s):  
Wen Hua Wang ◽  
Zhi You Feng ◽  
Ting Li Yang
Keyword(s):  
Computer Simulation ◽  
Dynamic Equation ◽  
Driving Force ◽  
Inverse Kinematics ◽  
Parallel Mechanism ◽  
Inverse Dynamics ◽  
Inverse Dynamic ◽  
Moving Platform

2UPS-RPU is a new 4-DOF parallel mechanism with serial input limb. In this paper, the inverse dynamic equation of this mechanism is formulated by Newton-Euler formation based on each limb and moving platform as the studying objects. The inverse kinematics of the mechanism is analyzed. The driving force, driving moment and the constraint moment can be obtained. Finally, a computer simulation is carried out to solve the inverse dynamics of the mechanism when the motion of moving platform is given.

scholarly journals The Inverse Dynamics of a 3-DOF Parallel Mechanism Based on Analytical Forward Kinematics

2020 ◽  
Author(s):  
Ke Wang ◽  
Ju Li ◽  
Huiping Shen ◽  
Jingjing You ◽  
Ting-Li Yang
Keyword(s):  
Dynamic Equation ◽  
Driving Force ◽  
Theoretical Basis ◽  
Inverse Kinematics ◽  
Parallel Mechanism ◽  
Inverse Dynamics ◽  
Forward Kinematics ◽  
Forward Solution ◽  
Inverse Dynamic ◽  
New Type

Abstract A new type of 3-dof parallel mechanism(PM) with analytical position forward solution is proposed. The reverse dynamic equation of the PM is solved. Different from the traditional dynamic analysis using inverse kinematics, the displacement, velocity and acceleration equations of the PM are established and solved by forward kinematics.The inverse dynamic equation of the PM is constructed and solved by analyzing the forces on each link and based on Newton-Euler method.Through MATLAB and ADAMS , the inverse dynamics is verified by an example. The maximum driving force error of each actuated pair is 1.32%, 5.8% and 5.2% respectively.This paper provides a theoretical basis for the design, manufacture and application of the PM.

Inverse Dynamics of 2UPS-2RPS Parallel Mechanism Based on Virtual Work Principle

2010 ◽  
Vol 29-32 ◽  
pp. 744-749 ◽  
Author(s):  
Wen Hua Wang ◽  
Zhi You Feng ◽  
Ting Li Yang ◽  
Ce Zhang
Keyword(s):  
Computer Simulation ◽  
Kinematic Analysis ◽  
Parallel Mechanism ◽  
Inverse Dynamics ◽  
Virtual Work ◽  
Dynamic Equations ◽  
Inverse Dynamic ◽  
Virtual Work Principle ◽  
Inverse Dynamic Model ◽  
Moving Platform

Inverse dynamic equations of the 2UPS-2RPS mechanism are formulated by utilizing the virtual work principle. Kinematic analysis of the mechanism is presented, on the basis of which the Jacobian matrices of the limbs and the mechanism are deduced. By combining the dynamics of the limbs and the moving-platform, the inverse dynamic model of the mechanism is obtained. Finally a computer simulation is carried out to demonstrate the dynamic analysis of the moving platform.

Dynamics of a Two-DOF Parallel Pointing Mechanism

2005 ◽  
Author(s):  
Alessandro Cammarata ◽  
Rosario Sinatra
Keyword(s):  
Numerical Simulation ◽  
Parallel Mechanism ◽  
Inverse Dynamics ◽  
Kinematic Model ◽  
Degree Of Freedom ◽  
Numerical Examples ◽  
Proposed Model ◽  
Dynamic Analyses ◽  
Moving Platform ◽  
Two Degree Of Freedom

This paper presents kinematic and dynamic analyses of a two-degree-of-freedom pointing parallel mechanism. The mechanism consists of a moving platform, connected to a fixed platform by two legs of type PUS (prismatic-universal-spherical). At first a simplified kinematic model of the pointing mechanism is introduced. Based on this proposed model, the dynamics equations of the system using the Natural Orthogonal Complement method are developed. Numerical examples of the inverse dynamics results are presented by numerical simulation.

Inverse Dynamic Analysis and Linearisation of a High Speed Parallel Mechanism

2005 ◽  
Author(s):  
M. Necip Sahinkaya ◽  
Yanzhi Li
Keyword(s):  
Dynamic Analysis ◽  
Parallel Mechanism ◽  
High Speed ◽  
Inverse Dynamics ◽  
Motion Path ◽  
Model Parameters ◽  
Control Input ◽  
Inverse Dynamic ◽  
Inverse Dynamic Analysis ◽  
Dynamics Models

Inverse dynamic analysis of a three degree of freedom parallel mechanism driven by three electrical motors is carried out to study the effect of motion speed on the system dynamics and control input requirements. Availability of inverse dynamics models offer many advantages, but controllers based on real-time inverse dynamic simulations are not practical for many applications due to computational limitations. An off-line linearisation of system and error dynamics based on the inverse dynamic analysis is developed. It is shown that accurate linear models can be obtained even at high motion speeds eliminating the need to use computationally intensive inverse dynamics models. A point-to-point motion path for the mechanism platform is formulated by using a third order exponential function. It is shown that the linearised model parameters vary significantly at high motion speeds, hence it is necessary to use adaptive controllers for high performance.

Dynamic Response and Nonlinear Characteristics of Spatial Parallel Mechanism With Spherical Clearance Joint

2019 ◽  
Vol 14 (4) ◽  
Author(s):  
Chen Xiulong ◽  
Li Yuewen ◽  
Jia Yonghao
Keyword(s):  
Dynamic Response ◽  
Contact Force ◽  
Dynamic Equation ◽  
Parallel Mechanism ◽  
Joint Clearance ◽  
Spherical Joint ◽  
Nonlinear Characteristics ◽  
Clearance Joint ◽  
Spatial Parallel Mechanism ◽  
Moving Platform

Spherical joint is a type of common kinematic pair in spatial parallel mechanism. The existence of spherical joint clearance has many adverse effects on the mechanism. A method of forecasting the dynamic behaviors of spatial parallel mechanism with spherical clearance joint is proposed. The 4-UPS-UPU spatial parallel mechanism with spherical clearance is taken as the research object, the dynamic response, and nonlinear characteristics of the mechanism are studied. The kinematic model and the contact force model of the spherical clearance are established. The dynamic equation of the spatial parallel mechanism with spherical joint clearance is derived by Newton–Euler method. The above-mentioned dynamic equation is solved by using the ODE113 function that is based on a variable order numerical differential algorithm in matlab. The dynamic responses of moving platform with different clearance values are analyzed. The contact force and the center trajectory of the sphere at the spherical joint are obtained. In addition, the phase trajectory, Poincare map, and bifurcation diagram are analyzed, and the nonlinear characteristics of the spherical clearance joint and the moving platform are obtained. By comparing the results, such as the acceleration of moving platform and the contact force, with virtual prototype simulation, the correctness of the dynamic equation of the spatial parallel mechanism with spherical clearance joint and the analysis results are verified. The researches show that the change of clearance value has a great influence on the motion state of spherical clearance joint, and chaos phenomena appears in the clearance joint with the increase in the clearance value. And the impact phenomenon appears between the spherical joint elements, which makes the mechanism generated vibration.

scholarly journals Design and Analysis of a Flexible, Elastic, and Rope-Driven Parallel Mechanism for Wrist Rehabilitation

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Zaixiang Pang ◽  
Tongyu Wang ◽  
Junzhi Yu ◽  
Shuai Liu ◽  
Xiyu Zhang ◽  
...  
Keyword(s):  
Inverse Kinematics ◽  
Parallel Mechanism ◽  
Inverse Kinematic ◽  
Parallel Structure ◽  
Flexible Joints ◽  
Rehabilitation Robots ◽  
Hybrid Mechanism ◽  
Compression Spring ◽  
Moving Platform

This paper proposes a bionic flexible wrist parallel mechanism to simulate human wrist joints, which is characterized by a rope-driven, compression spring-supported hybrid mechanism. Specifically, to realize the movement of the wrist mechanism, a parallel structure is adopted to support the mobile platform and is controlled by a cable, which plays the role of wrist muscles. Because the compression spring is elastic, it is difficult to directly solve inverse kinematics. To address this problem, the external force acting on the moving platform is firstly equivalent to the vector force and torque at the center of the moving platform. Then, based on inverse kinematic and static analyses, the inverse motion of the robot model can be solved according to the force and torque balance conditions and the lateral spring bending equation of the compression spring. In order to verify the proposed method, kinematics, statics, and parallel mechanism workspace are further analyzed by the software MATLAB. The obtained results demonstrate the effectiveness and feasibility of the designed parallel mechanism. This work offers new insights into the parallel mechanism with flexible joints in replicating the movements of the human wrist, thus promoting the development of rehabilitation robots and rope-driven technology to some extent.

scholarly journals Forward and Inverse Dynamics of a Six-Axis Accelerometer Based on a Parallel Mechanism

Sensors ◽  
2021 ◽  
Vol 21 (1) ◽  
pp. 233
Author(s):  
Linkang Wang ◽  
Jingjing You ◽  
Xiaolong Yang ◽  
Huaxin Chen ◽  
Chenggang Li ◽  
...  
Keyword(s):  
Configuration Space ◽  
Parallel Mechanism ◽  
Inverse Dynamics ◽  
Recursive Algorithm ◽  
Hamiltonian Function ◽  
Euler Method ◽  
Dynamic Equations ◽  
Sensor Calibration ◽  
Inverse Dynamic ◽  
New Strategy

The solution of the dynamic equations of the six-axis accelerometer is a prerequisite for sensor calibration, structural optimization, and practical application. However, the forward dynamic equations (FDEs) and inverse dynamic equations (IDEs) of this type of system have not been completely solved due to the strongly nonlinear coupling relationship between the inputs and outputs. This article presents a comprehensive study of the FDEs and IDEs of the six-axis accelerometer based on a parallel mechanism. Firstly, two sets of dynamic equations of the sensor are constructed based on the Newton–Euler method in the configuration space. Secondly, based on the analytical solution of the sensor branch chain length, the coordination equation between the output signals of the branch chain is constructed. The FDEs of the sensor are established by combining the coordination equations and two sets of dynamic equations. Furthermore, by introducing generalized momentum and Hamiltonian function and using Legendre transformation, the vibration differential equations (VDEs) of the sensor are derived. The VDEs and Newton–Euler equations constitute the IDEs of the system. Finally, the explicit recursive algorithm for solving the quaternion in the equation is given in the phase space. Then the IDEs are solved by substituting the quaternion into the dynamic equations in the configuration space. The predicted numerical results of the established FDEs and IDEs are verified by comparing with virtual and actual experimental data. The actual experiment shows that the relative errors of the FDEs and the IDEs constructed in this article are 2.21% and 7.65%, respectively. This research provides a new strategy for further improving the practicability of the six-axis accelerometer.

The Dynamic Analysis of a 2-PRR Planar Parallel Mechanism

2005 ◽  
Vol 219 (9) ◽  
pp. 901-909 ◽  
Author(s):  
L-P Wang ◽  
J-S Wang ◽  
J Chen
Keyword(s):  
Parallel Mechanism ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Inverse Dynamics ◽  
Driving Forces ◽  
Inverse Dynamic ◽  
Inverse Dynamic Model ◽  
Planar Parallel Manipulator ◽  
Euler Approach ◽  
Motion Parameters

The article presents the inverse dynamics of a two-degrees-of-freedom planar parallel manipulator by the Newton-Euler approach. On the basis of the inverse dynamic model, the driving forces of actuators are simulated in different motion parameters. Further, the effects of inertia of each moving component to the driving forces are computed through the numerical method.

Exploiting the Kinematic Redundancy of a (6 + 3) Degrees-of-Freedom Parallel Mechanism

2019 ◽  
Vol 11 (2) ◽  
Author(s):  
Louis-Thomas Schreiber ◽  
Clément Gosselin
Keyword(s):  
Inverse Kinematics ◽  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Kinematic Redundancy ◽  
Spatial Parallel Mechanism ◽  
Compressive Loads ◽  
Moving Platform

This paper presents methods to exploit the redundancy of a kinematically redundant spatial parallel mechanism with three redundant DOFs. The architecture of the mechanism is similar to the well-known Gough–Stewart (GS) platform and it retains its advantages, i.e., the members connecting the base to the moving platform are only subjected to tensile/compressive loads. The kinematic redundancy is exploited to avoid singularities and extend the rotational workspace. The architecture is described and the associated kinematic relationships are presented. Solutions for the inverse kinematics are given, as well as strategies to take into account the limitations of the mechanism such as mechanical interferences and velocity limits of the actuators while controlling the redundant degrees-of-freedom.

scholarly journals Dynamics modelling and analysis of a large-load swinging platform

2021 ◽  
Vol 2125 (1) ◽  
pp. 012020
Author(s):  
Meng Li ◽  
Xianguo Han ◽  
Ruihai Geng
Keyword(s):  
Output Power ◽  
Driving Force ◽  
Parallel Mechanism ◽  
Inertia Force ◽  
Large Load ◽  
Dynamics Modelling ◽  
Moving Platform ◽  
Simulation Results ◽  
Load Swing

Abstract Swing platform is widely used to simulate the motion attitude of vehicles, ships and aircraft while carrying large loads. Aiming at the excessive driving force and output power of the driving parts caused by the large load swing platform, a new swing platform which can bear the large load was established. The swing platform is equipped with four spring branch chains between the moving platform and the static platform of the 6-UPS parallel mechanism, so as to offset the gravity of the large load and the inertia force of the large load in the process of motion, and the driving force of each branch chain is reduced. In this paper, the structure of the swing platform is introduced, and the dynamics of the swing platform is modeled using the Newton-Euler dynamics equation. Finally, the driving force of each branch chain of the swing platform is obtained by simulation of the dynamics of the swing platform. The simulation results show that the swing platform with four spring branch chains can effectively reduce the driving force of each branch chain compared with the traditional 6-UPS parallel mechanism swing platform.

Sign in / Sign up

Export Citation Format

Share Document