Study of Efficient Electrical Failure Scheme

2013 ◽  
Vol 329 ◽  
pp. 259-263
Author(s):  
Li Ma ◽  
Huan Yun Wang ◽  
Jian Xin
Keyword(s):  
Thermal Imaging ◽  
Infrared Imaging ◽  
Image Data ◽  
Electrical Equipment ◽  
Early Failure ◽  
Electrical Failure ◽  
Accurate Temperature ◽  
Insulation Performance ◽  
Accurate Temperature Measurement

This paper mainly studies on Reasons for generating electrical fault .It deeply studies and analyzes the application of thermal imaging cameras. Thermal imaging cameras display clear image, data collection method is simple, timely and accurate infrared imaging technology to find hot hidden, to make a reliable forecast of the early failure of the electrical equipment defects and insulation performance,so that the early failure determination of electrical device becomes easy and changes traditional preventive maintenance to predicting maintenance.The thermal imaging for its safe ,accurate temperature measurement,and many other advantages more and more widely used.The research of this paper has some theory guidance and high application value.

Least-square refinement of structure parameters from CBED integrated intensities: application to determination of temperature factors in Y BA2CU3O7

1992 ◽  
Vol 50 (2) ◽  
pp. 1456-1457
Author(s):  
Kjersti Gjønnes ◽  
Jon Gjønnes
Keyword(s):  
Least Square ◽  
Measured Intensity ◽  
Structure Information ◽  
Accurate Temperature ◽  
Least Square Fit ◽  
Case Application ◽  
Integrated Intensities ◽  
Temperature Factors ◽  
Narrow Bands

Electron diffraction intensities can be obtained at large scattering angles (sinθ/λ ≥ 2.0), and thus structure information can be collected in regions of reciprocal space that are not accessable with other diffraction methods. LACBED intensities in this range can be utilized for determination of accurate temperature factors or for refinement of coordinates. Such high index reflections can usually be treated kinematically or as a pertubed two-beam case. Application to Y Ba2Cu3O7 shows that a least square refinememt based on integrated intensities can determine temperature factors or coordinates.LACBED patterns taken in the (00l) systematic row show an easily recognisable pattern of narrow bands from reflections in the range 15 < l < 40 (figure 1). Integrated intensities obtained from measured intensity profiles after subtraction of inelastic background (figure 2) were used in the least square fit for determination of temperature factors and refinement of z-coordinates for the Ba- and Cu-atoms.

Information and estimation in image processing

1987 ◽  
Vol 45 ◽  
pp. 14-17
Author(s):  
B. Roy Frieden
Keyword(s):  
Image Processing ◽  
Optical System ◽  
Large Amplitude ◽  
Communication Theory ◽  
Image Data ◽  
Direct Approach ◽  
Ill Posed

Despite the skill and determination of electro-optical system designers, the images acquired using their best designs often suffer from blur and noise. The aim of an “image enhancer” such as myself is to improve these poor images, usually by digital means, such that they better resemble the true, “optical object,” input to the system. This problem is notoriously “ill-posed,” i.e. any direct approach at inversion of the image data suffers strongly from the presence of even a small amount of noise in the data. In fact, the fluctuations engendered in neighboring output values tend to be strongly negative-correlated, so that the output spatially oscillates up and down, with large amplitude, about the true object. What can be done about this situation? As we shall see, various concepts taken from statistical communication theory have proven to be of real use in attacking this problem. We offer below a brief summary of these concepts.

scholarly journals Ga-La-S-Se glass for visible and thermal imaging

2017 ◽  
Vol 6 (2) ◽  
Author(s):  
Andrea Ravagli ◽  
Christopher Craig ◽  
John Lincoln ◽  
Daniel W. Hewak
Keyword(s):  
Thermal Imaging ◽  
Chalcogenide Glasses ◽  
Infrared Imaging ◽  
Low Cost ◽  
Short Wave ◽  
Infrared Transmission ◽  
New Family ◽  
Near Net Shape ◽  
Se Glass ◽  
Long Wave Infrared

AbstractChalcogenide glasses are emerging as important enabling materials for low-cost infrared imaging by virtue of their transparency in the key short-wave infrared (SWIR) to long-wave infrared (LWIR) bands and the ability to be mass produced and molded into near-net shape lenses. In this paper, we introduce a new family of chalcogenide glasses, which offer visible as well as infrared transmission and improved thermal and mechanical properties. These glasses are based on Ga

The Nature of Boxy/Peanut Spiral Galaxies: Overview and New Results

1997 ◽  
Vol 14 (2) ◽  
pp. 146-158 ◽  
Author(s):  
M. Bureau ◽  
K. C. Freeman
Keyword(s):  
Formation Mechanism ◽  
Vertical Structure ◽  
Near Infrared ◽  
Infrared Imaging ◽  
Spiral Galaxies ◽  
Physical Conditions ◽  
Bar Buckling ◽  
Line Imaging ◽  
Observational Program

AbstractThe formation mechanism of boxy/peanut-shaped bulges in spiral galaxies has been a problem for many years. We briefly review here the possible formation scenarios for boxy/peanut bulges, concentrating on both the bar-buckling and accretion hypotheses, and then describe an observational program aimed at testing those various theories and studying the vertical structure of edge-on bars. Our program includes optical long-slit spectroscopy, Hiline-imaging, near-infrared imaging, and multi-band optical imaging. New spectroscopic results (both optical and Hi) are presented on seven galaxies, including five boxy/peanut-bulge spirals. Based on Kuijken & Merrifield's (1995) idea for detecting edge-on bars, we argue that these observations constitute a strong case in favour of the bar-buckling mechanism for the formation of boxy/peanut-shaped bulges, but they also raise many questions and prompt for more detailed modelling to be made. The implications of the observations concerning the determination of rotation curves and of the physical conditions in bulges are also discussed.

A Design Method of Rain Test Device Based on Water Drop Motion Simulation

2013 ◽  
Vol 871 ◽  
pp. 363-368
Author(s):  
Hong Tao Zeng ◽  
Lin Lin Lin ◽  
Cong Feng ◽  
Zhi Huai Xiao
Keyword(s):  
Design Method ◽  
Water Drop ◽  
Electrical Equipment ◽  
Simulation Software ◽  
Test Device ◽  
Rainy Weather ◽  
Drop Motion ◽  
Water Drops ◽  
Motion Characteristics ◽  
Insulation Performance

In order to measure the electric insulation performance of the electrical equipment in rainy weather, its essential to design a rain device to simulate different conditions of rainfall. In this paper, a motion model of raindrop sprayed by the rain device and differential equations describing its motion characteristics are built. Basing on the analysis of water drop motion, a set of simulation software is developed for the selection of rain test device and the analysis of test results. The software can simulate the water drops motion process from nozzle to test equipment, and the simulation results is almost the same with field test, so the simulation software provides the basis for the design of rain test device.

Activation Volume Measurements

1971 ◽  
Vol 26 (2) ◽  
pp. 291-299 ◽  
Author(s):  
Michele Beyeler ◽  
David Lazarus
Keyword(s):  
Sodium Chloride ◽  
Hydrostatic Pressure ◽  
Ionic Conductivity ◽  
Activation Volume ◽  
Tracer Diffusion ◽  
Accurate Temperature ◽  
Volume Measurements ◽  
Accurate Temperature Control ◽  
Effect Of Hydrostatic Pressure

Abstract The determination of the activation volume of diffusion is one of the best methods for the in­vestigation of the relaxation of atoms or ions around defects. This paper discusses two experimental techniques for the determination of the activation volume for diffusion, by studying the effect of hydrostatic pressure on tracer diffusion and on ionic conductivity. Such experiments require a very clean hydrostatic pressure environment, accurate temperature control and measurement, and well defined specimen geometry. The difficulties encountered during such experiments are discussed. Results are given for the activation volumes of diffusion in beryllium and in sodium chloride.

scholarly journals Constructing a New Inter-Calibration Method for DMSP-OLS and NPP-VIIRS Nighttime Light

2020 ◽  
Vol 12 (6) ◽  
pp. 937 ◽  
Author(s):  
Jinji Ma ◽  
Jinyu Guo ◽  
Safura Ahmad ◽  
Zhengqiang Li ◽  
Jin Hong
Keyword(s):  
Infrared Imaging ◽  
Dynamic Range ◽  
Calibration Method ◽  
Logistic Function ◽  
Coefficient Of Determination ◽  
Nighttime Light ◽  
Development Assessment ◽  
China Region

The anthropogenic nighttime light (NTL) data that are acquired by satellites can characterize the intensity of human activities on the ground. It has been widely used in urban development assessment, socioeconomic estimate, and other applications. However, currently, the two main sensors, Defense Meteorological Satellite Program’s Operational Linescan System (DMSP-OLS) and Suomi National Polar-orbiting Partnership Satellite’s Visible Infrared Imaging Radiometer Suite (NPP-VIIRS), provide inconsistent data. Hence, the application of NTL for long-term analysis is hampered. This study constructed a new inter-calibration method for DMSP-OLS and NPP-VIIRS nighttime light to solve this problem. First, NTL data were processed to obtain vicarious site across China. By comparing different candidate models, it is discovered the Biphasic Dose Response (BiDoseResp) model, which is a weighted combination of sigmoid functions, can best perform the regression between DMSP-OLS and logarithmically transformed NPP-VIIRS. The coefficient of determination of BiDoseResp model reaches 0.967. It’s residual sum of squares is 6.136 × 10 5 , which is less than 6.199 × 10 5 of Logistic function. After obtaining the BiDoseResp-calibrated VIIRS (BDRVIIRS), we smoothed it by a filter with optimal parameters to maximize the consistency. The result shows that the consistency of NTL data is greatly enhanced after calibration. In 2013, the correlation coefficient between DMSP-OLS and original NPP-VIIRS data in the China region is only 0.621, while that reaches to 0.949 after calibration. Finally, a consistent NTL dataset of China from 1992 to 2018 was produced. When compared with the existing methods, our method is applicable to the full dynamic range of DMSP-OLS. Besides, it is more suitable for country or larger scale areas. It is expected that this method can greatly facilitate the development of research that is based on the historical NTL archive.

Fast Diffusion in Germanium and Silicon Investigated by Lamp-Based Rapid Thermal Annealing

2008 ◽  
Vol 573-574 ◽  
pp. 35-43 ◽  
Author(s):  
Nicolaas Stolwijk ◽  
Ludmila Lerner ◽  
Axel Giese ◽  
Wilfried Lerch
Keyword(s):  
Temperature Measurement ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Isothermal Annealing ◽  
Diffusion Processes ◽  
Fast Diffusion ◽  
Scientific Impact ◽  
Accurate Temperature ◽  
Accurate Temperature Measurement

The study of fast diffusion processes in materials requires short isothermal annealing treatments combined with an accurate temperature measurement. The paper discusses the special demands on rapid thermal annealing (RTA) devices in diffusion research and how these can be met in practice. The scientific impact of RTA for diffusion research in semiconductors is demonstrated by several examples dealing with fast impurities in Ge and Si.

Sign in / Sign up

Export Citation Format

Share Document