Study on the Heat-Treatment of Clad Plate for Cutting Tools

2013 ◽  
Vol 401-403 ◽  
pp. 916-919
Author(s):  
Lin Lin Yuan ◽  
Jing Tao Han ◽  
Jing Liu
Keyword(s):  
Heat Treatment ◽  
Stainless Steel ◽  
Cutting Tools ◽  
High Hardness ◽  
Core Layer ◽  
Water Cooling ◽  
Treatment Processes ◽  
Uniform Microstructure ◽  
Hot Rolled ◽  
Cutting Tool Materials

High sharpness, abrasion resistance, superior ductility, and processability are required in cutting tool materials application. Used 304(0Cr18Ni9) austenitic stainless steel as cladding and 440(7Cr17) martensitic stainless steel as core layer to produce excellently combined stainless steel plate by hot-rolled bonding in this investigation as well as researched various heat treatment processes. The results indicated that the core layer has high hardness and the cladding layer has tiny and uniform microstructure by the method of heating at 10501070°C for 15 minutes, water-cooling , then tempering at 200°C.

Hardening of Selective Laser Melted M2 Steel

2021 ◽  
Author(s):  
Mei Yang ◽  
Yishu Zhang ◽  
Haoxing You ◽  
Richard Smith ◽  
Richard D. Sisson
Keyword(s):  
Heat Treatment ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
High Hardness ◽  
Steel Part ◽  
X Ray Diffraction ◽  
X Ray ◽  
Heat Treated ◽  
Near Net Shape

Abstract Selective laser melting (SLM) is an additive manufacturing technique that can be used to make the near-net-shape metal parts. M2 is a high-speed steel widely used in cutting tools, which is due to its high hardness of this steel. Conventionally, the hardening heat treatment process, including quenching and tempering, is conducted to achieve the high hardness for M2 wrought parts. It was debated if the hardening is needed for additively manufactured M2 parts. In the present work, the M2 steel part is fabricated by SLM. It is found that the hardness of as-fabricated M2 SLM parts is much lower than the hardened M2 wrought parts. The characterization was conducted including X-ray diffraction (XRD), optical microscopy, Scanning Electron Microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS) to investigate the microstructure evolution of as-fabricated, quenched, and tempered M2 SLM part. The M2 wrought part was heat-treated simultaneously with the SLM part for comparison. It was found the hardness of M2 SLM part after heat treatment is increased and comparable to the wrought part. Both quenched and tempered M2 SLM and wrought parts have the same microstructure, while the size of the carbides in the wrought part is larger than that in the SLM part.

Microstructure and Properties of Heat-Treated 440C Martensitic Stainless Steel

2013 ◽  
Vol 334-335 ◽  
pp. 105-110 ◽  
Author(s):  
Siti Hawa Mohamed Salleh ◽  
Mohd Nazree Derman ◽  
Mohd Zaidi Omar ◽  
Junaidi Syarif ◽  
S. Abdullah
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Stainless Steel ◽  
Martensitic Stainless Steel ◽  
Ferrite Matrix ◽  
Rapid Quenching ◽  
Heat Treated Sample ◽  
Treatment Processes ◽  
Heat Treated ◽  
Treated Sample

440C martensitic stainless steels are widely used because of their good mechanical properties. The mechanical properties of 440C martensitic stainless steel were evaluated after heat treatment of these materials at various types of heat treatment processes. The initial part of this investigation focused on the microstructures of these 440C steels. Microstructure evaluations from the as-received to the as-tempered condition were described. In the as-received condition, the formations of ferrite matrix and carbide particles were observed in this steel. In contrast, the precipitation of M7C3carbides and martensitic structures were present in this steel due to the rapid quenching process from the high temperature condition. After precipitation heat treatment, the Cr-rich M23C6carbides were identified within the structures. Moreover, a 30 minutes heat-treated sample shows the highest value of hardness compared to the others holding time. Finally, the tempering process had been carried out to complete the whole heat treatment process in addition to construct the secondary hardening phenomenon. It is believed that this phenomenon influenced the value of hardness of the 440C steel.

scholarly journals Pengaruh Media Pendingin Terhadap Kekerasan Baja Tahan Karat Martensitik Type 431 Pada Proses Hardening dan Tempering

2018 ◽  
Vol 1 (02) ◽  
pp. 27-32
Author(s):  
Suyanta Suyanta ◽  
Subagiyo Subagiyo ◽  
Syamsul Hadi ◽  
Zahratul Jannah
Keyword(s):  
Stainless Steel ◽  
Stainless Steels ◽  
Air Conditioning ◽  
Cutting Tool ◽  
High Hardness ◽  
Air Cooling ◽  
Water Cooling ◽  
Cooling Medium ◽  
Hardening Process ◽  
Cooling Media

Stainless steels consist of several types such as Austenitic, Ferritic and Martensitic, Martensitic is one of the stainless steels that has a hardenability property, so it is suitable to be used as cutting tool components which require high hardness and corrosion resistance . The purpose of this study was to obtain information about the hardness of stainless steel martensitic type of hardening results with variations of cooling media. Methods of research used were experiments, ie hardening process by heating the material up to 1100oC temperature, held for 30 minutes, then cooled quickly on water, oil and the air, then heated back to 400oC temperature, cooled slowly, the results tested the hardness of Rockwell C method The results showed the type of stainless steel type martensitic 431 increased significantly after the Hardening process of 21.20 HRC before hardening, and after the hardening process to 47 , 6 HRC with water cooling, 47.9 HRC with oil cooling medium and 46.5 HRC for air cooling media, hardness after tempering down ranges from 6-7 HRC to 41.7 HRC for hardening with water cooling medium 41, 2HRC hardening results with oil cooling medium, and 40,4HRC un tuk hardening results with air conditioning medium.

scholarly journals PENGARUH QUENCHING DENGAN MEDIA PENDINGIN AIR DAN OLI TERHADAP MECHANICAL PROPERTIS BAJA S45C

JTAM ROTARY ◽  
2019 ◽  
Vol 1 (2) ◽  
pp. 183
Author(s):  
Deni Setiadi ◽  
Achmad Kusairi Samlawi
Keyword(s):  
Heat Treatment ◽  
High Hardness ◽  
Hardness Test ◽  
Water Cooling ◽  
Test Analysis ◽  
Cooling Medium ◽  
A Value ◽  
Before And After ◽  
Cooling Media

The role of steel in the industrial world today is very important, especially in terms of making components related to violence such as gears, fly wheel, axe, and so forth.This steel has a high hardness for components that require hardness, to uletan and resistance to friction. get hardness and resistance to steel hence need heat treatment process using Quenching process. The material of this research is S45C carbon steel with specimen number 1 for hardness test before treatment and after treatment with rockwell test, this process is done in Central Laboratory of FMIPA UM, unfortunate. In this process heat treatment is carried out at temperatures of 800⁰C and 900⁰C with water and oil cooling medium, from the results of comparative analysis on S45C steel before and after the treatment obtained increased hardness. This can be seen from the test analysis in which 93 kgf of hardness n is for the untreated specimens. At a temperature of 800⁰C with a water cooling medium at a crude value of 94.6 kgf, and on oil cooling medium at a hardness value of 92.5 kgf. At a temperature of 900⁰C with a water cooling medium at a hardness value of 93.5 kgf and on the oil cooling medium at a value of 93 kgf. Can be concluded from all the cooling media is the highest media water with value of violence 94.6 kgf.Keywords: S45C Steel, Quenching, Cooling

Laboratory Experiment of New Cutting Materials in Milling Processes

2014 ◽  
Vol 611 ◽  
pp. 467-471 ◽  
Author(s):  
Igor Vilček ◽  
Jozef Kováč ◽  
Jaroslava Janeková
Keyword(s):  
Cubic Boron Nitride ◽  
Cutting Tools ◽  
High Hardness ◽  
Hardened Steel ◽  
Production Costs ◽  
Machining Processes ◽  
Hard Materials ◽  
Removal Processes ◽  
Conventional Machining ◽  
Cutting Tool Materials

The development of manufacturing technology is mostly given by economics, environmental trends and the development of cutting materials and machine tools. Manufacturing is a significant part of the worldwide economy. Machining (material removal processes) represents major part of production costs. This paper yield inquiries into the hard and precise milling with a focus on force effects in experimental machining, tool wear and final surface qualities (roughness, micro hardness). The precision machining of hardened steel differs from conventional machining in terms of the hardness of the workpiece materials and the cutting tool materials that are required. Hard materials are characterized by high hardness (> 45 HRC) and abrasiveness. Machining processes require cutting tools of much higher hardness and also higher resistance of the abrasive wear. Recently developed cubic boron nitride (CBN) and coated sintered carbides cutting tools are considered to have the ability of cutting such as steel. CBN cutting tools show good performance during machining of the hardened steel because of their hot hardness and good fracture toughness.

Sign in / Sign up

Export Citation Format

Share Document