Recycled Polypropylene/SEBS Polyblends: Manufacture and Mechanical Property Evaluation

2013 ◽  
Vol 457-458 ◽  
pp. 53-56
Author(s):  
Jia Horng Lin ◽  
Zheng Yan Lin ◽  
Jin Mao Chen ◽  
Ching Wen Lou
Keyword(s):  
Tensile Strength ◽  
Impact Strength ◽  
Polarized Light ◽  
Strength Test ◽  
Recycled Polypropylene ◽  
Property Evaluation ◽  
Poly Ethylene ◽  
The Impact ◽  
Test Impact ◽  
Spherulite Morphology

This study polystyrene-b-poly (ethylene-r-butylene)-b-polystyrene (SEBS) elastomer to modify recycled polypropylene (RPP). Tensile strength test, impact strength test, and a polarized light microscope are used to evaluate the mechanical properties and spherulite morphology of the resulting RPP/SEBS polyblends. The experiment results show that with an increase in SEBS, tensile strength of the polyblends decreases from 29 MPa to 13 MPa. With the distribution of SEBS in RPP, the spherulite size of RPP decreases, but the impact strength significantly increases.

Manufacturing Technique and Property Evaluation of Impact-Resistant Polypropylene/Glass Fiber Composites

2011 ◽  
Vol 239-242 ◽  
pp. 1976-1979 ◽  
Author(s):  
Ching Wen Lou ◽  
Ching Wen Lin ◽  
Wen Hao Hsing ◽  
Jin Mao Chen ◽  
Cheng Yu Ke ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Impact Strength ◽  
Glass Fibers ◽  
Stress Test ◽  
Weight Ratio ◽  
Strength Test ◽  
Flexural Stress ◽  
Molding Method ◽  
Izod Impact ◽  
The Impact

Using the injection molding method, impact-resistant polypropylene (PP) and glass fibers (GF) with weight ratios of 5 wt%, 10 wt%, 15 wt%, 20 wt%, 25 wt% and 30 wt% were blended twice, completing high-impact PP/ GF composites. Next, the tensile strength test, flexural stress test and IZOD impact strength test measured the composites. According to the results, with an increase in glass fibers, the composites exhibited a greater tensile strength, which further reached to climax when the GF weight ratio was 25 wt%. However, tensile strength appeared inversely proportionate to the blending frequency. In addition, regardless of blending frequencies, the optimum flexural stress occurred when the GF weight ratio was 25 wt%; nevertheless, it started declining when the ratio was 30 wt%. Finally, indicated by IZOD impact test, the greater the GF weight ratio, the lower the impact strength the composites exited.

scholarly journals ANALISIS KEKUATAN TARIK DAN IMPAK MATERIAL KOMPOSIT POLIMER DALAM APLIKASI FIBERBOAT

2021 ◽  
Vol 4 ◽  
pp. 121-126
Author(s):  
Rezza Ruzuqi ◽  
Victor Danny Waas
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Composite Materials ◽  
Impact Strength ◽  
Metal Corrosion ◽  
Phase System ◽  
Low Density ◽  
Weight Percentage ◽  
Multi Phase ◽  
The Impact

Composite material is a material that has a multi-phase system composed of reinforcing materials and matrix materials. Causes the composite materials to have advantages in various ways such as low density, high mechanical properties, performance comparable to metal, corrosion resistance, and easy to fabricate. In the marine and fisheries industry, composite materials made from fiber reinforcement, especially fiberglass, have proven to be very special and popular in boat construction because they have the advantage of being chemically inert (both applied in general and marine environments), light, strong, easy to print, and price competitiveness. Thus in this study, tensile and impact methods were used to determine the mechanical properties of fiberglass polymer composite materials. Each test is carried out on variations in the amount of fiberglass laminate CSM 300, CSM 450 and WR 600 and variations in weight percentage 99.5% -0.5%, 99% -1%, 98.5% -1, 5%, 98% -2% and 97.5%-2.5% have been used. The results showed that the greater the number of laminates, the greater the impact strength, which was 413,712 MPa, and the more the percentage of hardener, the greater the impact strength, which was 416,487 MPa. The results showed that the more laminate the tensile strength increased, which was 87.054 MPa, and the more the percentage of hardener, the lower the tensile strength, which was 73.921 MPa.

Simple Theory of Stress Strain Properties of Filled Polymers

1967 ◽  
Vol 40 (3) ◽  
pp. 801-805 ◽  
Author(s):  
Lawrence E. Nielsen
Keyword(s):  
Tensile Strength ◽  
Impact Strength ◽  
Rapid Decrease ◽  
Filler Concentration ◽  
Good Adhesion ◽  
Stress Strain ◽  
Filled Polymers ◽  
The Impact ◽  
Perfect Adhesion ◽  
Approximate Equations

Abstract By the use of simple models of filled plastics, approximate equations are derived for elongation to break in the case of perfect adhesion between the phases and for the tensile strength in the case of no adhesion between the polymer and filler phases. By combining these equations with equations for the modulus (assuming Hookean behavior) all the stress strain properties can be derived, including rough estimates of the impact strength, as a function of filler concentration. The theory predicts a very rapid decrease in elongation to break as filler concentration increases, especially with good adhesion; it is also predicted that the tensile strength of a filled polymer can be greater than that of an unfilled polymer.

scholarly journals Effects of Phase Morphology on Mechanical Properties: Oriented/Unoriented PP Crystal Combination with Spherical/Microfibrillar PET Phase

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 248 ◽  
Author(s):  
Dashan Mi ◽  
Yingxiong Wang ◽  
Maja Kuzmanovic ◽  
Laurens Delva ◽  
Yixin Jiang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Ethylene Terephthalate ◽  
Phase Morphology ◽  
Mechanical Recycling ◽  
Immiscible Blends ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene ◽  
The Impact

In situ microfibrillation and multiflow vibrate injection molding (MFVIM) technologies were combined to control the phase morphology of blended polypropylene (PP) and poly(ethylene terephthalate) (PET), wherein PP is the majority phase. Four kinds of phase structures were formed using different processing methods. As the PET content changes, the best choice of phase structure also changes. When the PP matrix is unoriented, oriented microfibrillar PET can increase the mechanical properties at an appropriate PET content. However, if the PP matrix is an oriented structure (shish-kebab), only the use of unoriented spherical PET can significantly improve the impact strength. Besides this, the compatibilizer polyolefin grafted maleic anhydride (POE-g-MA) can cover the PET in either spherical or microfibrillar shape to form a core–shell structure, which tends to improve both the yield and impact strength. We focused on the influence of all composing aspects—fibrillation of the dispersed PET, PP matrix crystalline morphology, and compatibilized interface—on the mechanical properties of PP/PET blends as well as potential synergies between these components. Overall, we provided a theoretical basis for the mechanical recycling of immiscible blends.

Influence of Morphology on Mechanical Properties under the Combined Use of SEBS and EOr as Elastomer in PP/Elastomer/Filler Ternary Composites

2011 ◽  
Vol 19 (9) ◽  
pp. 725-732
Author(s):  
Shigeki Hikasa ◽  
Kazuya Nagata ◽  
Yoshinobu Nakamura
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Triblock Copolymer ◽  
Continuous Phase ◽  
Dispersed Phase ◽  
Impact Properties ◽  
Combined Use ◽  
Poly Ethylene ◽  
Almost All ◽  
The Impact

The influences of combined elastomers on impact properties and morphology of polypropylene (PP)/elastomer/CaCO3 ternary composites were investigated. In the case that polystyrene- block-poly(ethylene-butene)- block-polystyrene triblock copolymer (SEBS) and poly(ethylene- co-octene) (EOR) were used as elastomers, a sea-island structure consisting of EOR dispersed phase and SEBS continuous phase was formed. The elastomer and the CaCO3 particles were separately dispersed in PP matrix. In the case that carboxylated SEBS (C-SEBS) and EOR were used, the C-SEBS particles were dispersed in the EOR particles. Almost all of the CaCO3 particles were dispersed in the PP matrix, although some of the CaCO3 particles were dispersed in the C-SEBS/EOR combined particles. Impact strength improved with an increase of incorporated CaCO3 particles. The effect of elastomer on the impact strength was SEBS ≥ SEBS/EOR > EOR = C-SEBS/EOR > C-SEBS. The morphology formed by elastomer and CaCO3 particles strongly affected the impact properties of the ternary composites.

New Emerging Al7075 Based Hybrid Nanocomposite for Automotive Applications: A Sustainability Approach

2020 ◽  
Vol 856 ◽  
pp. 29-35
Author(s):  
Sweety Mahanta ◽  
M. Chandrasekaran ◽  
Sutanu Samanta
Keyword(s):  
Tensile Strength ◽  
Impact Strength ◽  
Hybrid Composites ◽  
High Strength ◽  
Stir Casting ◽  
Automotive Application ◽  
Percentage Increase ◽  
Casting Technique ◽  
Ultrasonic Assisted Stir Casting ◽  
The Impact

Aluminium matrix composites (AMCs) have emerged as the substitute for the monolithic (unreinforced) materials over the past few decades. The applications of AMCs are common in automotive, aerospace, defence and biomedical sectors due to its lower weight, high strength, high resistance against corrosion and high thermal and electrical conductivity. In this work, it is aimed fabricate a new class Al 7075 based hybrid composites reinforcing with nanoparticulates suitable for automotive application. Al7075 reinforced with fixed quantity of boron carbide (B4C) (1.5 wt.%) and varying wt % of flyash (0.5 wt.%, 1.0 wt.%, 1.5 wt.%) is fabricated using ultrasonic-assisted stir casting technique. Physical and mechanical characterization such as density, porosity, micro hardness, tensile strength and impact strength were estimated for three different compositions. The tensile strength and percentage increase in hardness value of the nanocomposite Al7075-B4C (1.5 wt. %)-flyash (0.5 wt. %): HNC3 found maximum as 294 MPa and 32.93%. In comparison with Al7075 alloy the impact strength of HNC3 shows the highest percentage of 9.31% respectively.

Electrical and Mechanical Properties of Carbon Aerogels / Phenolic Resin for Nanocomposites

2011 ◽  
Vol 236-238 ◽  
pp. 1725-1730 ◽  
Author(s):  
Wei Jen Chen ◽  
Ming Yuan Shen ◽  
Yi Luen Li ◽  
Chin Lung Chiang ◽  
Ming Chuen Yip
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Impact Strength ◽  
Flexural Strength ◽  
Phenolic Resin ◽  
Surface Conductivity ◽  
Carbon Aerogels ◽  
Polymer Resin ◽  
The Impact ◽  
Humidity Environment

This study used carbon aerogels (CA) and phenolic resin in fixed proportations to produce nano high polymer resin, and used poly ehtylene oxide (PEO) as the modifying agent for phenolic resin to improve the mechanical properties of phenolic resin and promote the surface conductivity. The prepared nano high polymer resin and carbon cloth were made into nano-prepreg by using ultrasonic impregnation method, and a nano-prepreg composite material was prepared by using hot compacting and cut to test pieces to measure its mechanical properties and surface conductivity as well as the influence of temperature-humidity environment (85°C/168hr and 85°C/85%RH/168hr) on mechanical properties. The result showed that the surface conductivity increased by 64.55%, the tensile strength at room temperature increased by 35.7%, the flexural strength increased by 18.4%, and the impact strength increased by 101%. In hot environment (85°C/168hr), the tensile strength decreased by 23.8%, the flexural strength increased by 3.1%, and the impact strength increased by 84.6%. In high temperature-high humidity environment (85°C/85% RH/168hr), the tensile strength decreased by 29.6%, the flexural strength decreased by 17%, and the impact strength increased by 95.7%.Introduction

Comparison of Mechanical and Frictional Properties of PTFE Matrix Composites Reinforced by Different Fibers and Graphite

2013 ◽  
Vol 575-576 ◽  
pp. 203-208
Author(s):  
Hong Xing Xu ◽  
Xin Hua Yuan ◽  
En Bo Zhu ◽  
Shuang Lian Li ◽  
Ling Chen ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Impact Strength ◽  
Tribological Properties ◽  
Polyphenylene Sulfide ◽  
Matrix Composites ◽  
Load Bearing Capacity ◽  
Elongation At Break ◽  
Frictional Properties ◽  
Mass Fractions ◽  
The Impact

The polytetrafluoroethylene (PTFE) matrix composites which filled with polyphenylene sulfide (PPS) fiber, poly-p-phenelenferephthalamide (PPTA) fibre or glass fiber (GF)) and graphite at various mass fractions were prepared by the processes of mechanical blending, compression molding and sintering. The mechanical properties of the composites, such as tensile strength, impact strength and hardness were investigated. The results show that tensile strength and elongation at break markedly decrease but elasticity increases by filling with fibers. Impact strength decreases by filling with PPS and GF, and the composite displays brittle characteristic. However, the impact strength rapidly increases by filling with PPTA fiber. Hardness increases with the fibers content increases, and decreases with graphite content increases. Filling graphite into PTFE has light effect on the impact and tensile strength of composites. The tribological properties of the composites were investigated on M-2000 wear tester at dry friction condition. The wear mechanism was also discussed and the wear surfaces were examined by SEM. The result indicates that fibers which diffused in PTFE matrix wind with PTFE molecule chain, and then form grid structure. The load-bearing capacity of composites can be obviously enhanced and the trend of block fragmentations slide is inhibited, so that the tribological properties are improved markedly.

scholarly journals Cellulose Fiber-Reinforced PLA versus PP

2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Nina Graupner ◽  
Jörg Müssig
Keyword(s):  
Tensile Strength ◽  
Impact Strength ◽  
Load Transfer ◽  
Cellulose Fiber ◽  
Fiber Reinforced ◽  
Strain Behavior ◽  
The Matrix ◽  
Lyocell Fibers ◽  
Reinforced Thermoplastics ◽  
The Impact

The present study focuses on a comparison between different cellulose fiber-reinforced thermoplastics. Composites were produced with 30 mass-% lyocell fibers and a PLA or PP matrix with either an injection (IM) or compression molding (CM) process. Significant reinforcement effects were achieved for tensile strength, Young’s modulus, and Shore D hardness by using lyocell as reinforcing fiber. These values are significantly higher for PLA and its composites compared to PP and PP-based composites. Investigations of the fiber/matrix adhesion show a better bonding for lyocell in PLA compared to PP, resulting in a more effective load transfer from the matrix to the fiber. However, PLA is brittle while PP shows a ductile stress-strain behavior. The impact strength of PLA was drastically improved by adding lyocell while the impact strength of PP decreased. CM and IM composites do not show significant differences in fiber orientation. Despite a better compaction of IM composites, higher tensile strength values were achieved for CM samples due to a higher fiber length.

scholarly journals Mechanical Properties for Elephant Dung and its Utilization as a Raw Material Composites Sheet: A Study

2021 ◽  
Vol 10 (1) ◽  
pp. 1-7
Author(s):  
Rohit Kumar ◽  
Ramratan . ◽  
Anupam Kumar ◽  
Rajinder Singh Smagh
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Impact Strength ◽  
Polymer Composite ◽  
Natural Fiber ◽  
Testing Machine ◽  
Raw Material ◽  
Weight Percentage ◽  
The Impact ◽  
Elephant Dung

Elephant dung is an excellent source of cellulosic fiber that is a basic requirement for paper making. But they contributed to very small percentage production of elephant dung. So, researchers are trying to find a new area of utilization of elephant dung fiber pulp as in reinforcement’s polymer composite. In this experiment element dung fiber pulp in the natural fiber component chemically treated with alkaline and soda AQ solution in this study, it has been aimed to use elephant dung fiber pulp in composite material and to study mechanical properties of the produced material. The produced composite samples were then characterized using tensile test, Izod impact test, thickness test. The fracture surface of the polymer composite sample was also inspected with the help of SEM. The content of elephant dung fiber pulp is varied (35%, 45%, 55%) weight percentage whereas the epoxy resin is varied (50%, 40%, 30%) percentage is kept constant 15% in hardener. The entire sample has been tested in a universal testing machine as per ASTM standard for tensile strength and impact strength. It is observed that composite with 35% fiber pulp is having the highest tensile strength of 4mm 6.445 Mpa and 8mm 11.80 Mpa. The impact strength of composite with 35% fiber pulp washes highest than 45% to 55% dung fiber pulp. This produces composite sheet will be used for the surfboards, sporting goods, building panel this not only reduces the cost but also save from environmental pollution.

Sign in / Sign up

Export Citation Format

Share Document