The Stability of Weft Insertion of CRT – 83 Carpet Rapier Loom

2013 ◽  
Vol 457-458 ◽  
pp. 684-687
Author(s):  
Yong Dong Cai ◽  
Shun Bin Ma
Keyword(s):  
Theoretical Analysis ◽  
Initial Deformation ◽  
Weft Yarn ◽  
High Grade ◽  
Release Times ◽  
Factors Influencing ◽  
Main Factors ◽  
The Stability ◽  
Theory Research

CRT- 83 carpet rapier loom is a kind of high-grade rigid rapier loom，the weft yarn will give looms to demand higher stability of the weft insertion. Theoretical analysis based on the theory research of the stability of clamping weft and weft handover shows that the rapier deformation，slipping force and the depth of clamping are main factors influencing the stability of weft insertion.In order to obtain reasonable process of weft insertion，concerned with the following factors：the grip length and outrigger length of rapier，release times of clip yarn device，initial deformation angle of spring piece.

scholarly journals THE ROLE OF THE RELATIONSHIP WITH THE MOTHER IN CHILDHOOD IN FORMING A WOMAN'S ATTITUDE TOWARDS HER OWN MOTHERHOOD

2020 ◽  
Vol 11 (87) ◽  
Author(s):  
Tatiana Sidorenko ◽  
◽  
Natalia Grisenko ◽  
Keyword(s):  
Theoretical Analysis ◽  
Adult Age ◽  
Personal Attitude ◽  
Psychological Science ◽  
Factors Influencing ◽  
Different Types ◽  
Main Factors ◽  
Psychological Features ◽  
The Relationship

The article is devoted to the study of such an important psychological phenomenon as an attitude of women to their own motherhood. It is summarizes the study of the problem of motherhood in psychological science in general. The article analyzes the problem of the influence of the relationship with the mother in childhood on the formation of a woman's attitude to her own motherhood in adult age. It is illuminates views of foreign and national researchers on the study of this phenomenon, as well as the essence of different areas of research on this phenomenon. Based on the theoretical analysis of the literature on this topic, the concept of "motherhood", its content and psychological essence is studied. Cultural-historical, biological, physiological and psychological aspects to the study of motherhood are singled out. The main content of scientific views on the formation of the phenomenon of motherhood is generalized. The main factors influencing the development of a woman's maternal sphere and the formation of the attitude to one's own motherhood are analyzed and considered. The content of such basic concepts as "mother's image" and "maternal relations" is revealed. The psychological features of the formation of an adequate image of the mother in the theoretical analysis of the ontogenesis of the maternal sphere are analyzed. The article also reveals the dynamics of motherhood in ontogenesis. The types of maternal relations and their role in the life of a mature woman are determined, as well as the influence of these relations on the formation of a woman's attitude to her own motherhood. The influence of different types of relationships between women and their own mothers on the level of formation of their attitude to personal motherhood has been empirically studied. Two groups of women were studied, one group had a positive relationship with their own mother, and the other had a negative one. In the course of the research the differences between different types of maternal relations and the level of formation of a woman's personal attitude to motherhood are singled out.

Finite Element Analysis on Stability for Elastic-Jumping Membrane

2011 ◽  
Vol 287-290 ◽  
pp. 717-722 ◽  
Author(s):  
Zhen Ting Wu ◽  
Shun Jiang Li
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Critical Load ◽  
Element Model ◽  
Structure Parameter ◽  
Element Analysis ◽  
Factors Influencing ◽  
Optimizing Design ◽  
Main Factors ◽  
The Stability

In order to increase the designing precision and study the main factors influencing the stability of metal elastic-jumping membrane, a set of experimental equipments have been designed to test the stability of metal elastic-jumping membrane. The laws of influencing the stability of elastic-jumping membrane were studies by changing the thickness, high, radius etc structure parameter. It shows that the increasing of high and thickness can enhance the distortion rigidity of metal elastic-jumping membrane, result in the increase of critical load at losing stability; the increasing of diameter can reduce the distortion rigidity of metal elastic-jumping membrane, result in the decrease of critical load at losing stability. At the same time, the correctness of finite element model was confirmed, and the basis was established for finite element method applying in optimizing design of metal elastic-jumping membrane.

scholarly journals MAIN FACTORS INFLUENCING THE CHOICE OF TRANSPORTATION METHOD

2021 ◽  
Vol 1 (1) ◽  
pp. 191-192
Author(s):  
Yuliya Poltavskaya
Keyword(s):  
Transport System ◽  
Factors Influencing ◽  
Main Factors ◽  
The Stability

An overview of the factors influencing the choice between intermodal and unimodal modes of transportation is presented. Determining the ranges of equally advantageous transportation distances will increase the stability of the transport system, considering the technical and operational characteristics of modes of transport

scholarly journals Factors Influencing the Corrosion of Infantry Weapons’ Barrels

2021 ◽  
Vol 27 (3) ◽  
pp. 92-96
Author(s):  
Stelian Popescu
Keyword(s):  
Factors Influencing ◽  
Inner Surface ◽  
Main Factors ◽  
The Stability ◽  
Design And Construction ◽  
Weapons Systems

Abstract The condition of the inner surface of the barrels greatly influences the stability of the bullet and the accuracy of firing with infantry weapons. Therefore, it is of particular importance to keep the inside of the barrels in perfect condition and to protect them against corrosion. For this reason, the article aims to highlight the possible degradation of the inside of the barrels in operation and the main factors influencing their corrosion, in order to counteract their effect. The whole issue is addressed both to the personnel specialized in the design and construction of infantry weapons systems and to the personnel that uses them.

scholarly journals Factors Influencing the Stability and Quality of the French ED Surveillance System

2016 ◽  
Vol 8 (1) ◽  
Author(s):  
Isabelle Pontais ◽  
Vanina Bousquet ◽  
Marc Ruello ◽  
Céline Caserio-Schönemann ◽  
Anne Fouillet
Keyword(s):  
Data Quality ◽  
Surveillance System ◽  
Syndromic Surveillance ◽  
Syndromic Surveillance System ◽  
Health Events ◽  
Factors Influencing ◽  
Temporal Factors ◽  
Main Factors ◽  
The Stability

Identification of the main factors influencing the stability and the quality of the French Emergency departments (ED) syndromic surveillance system: tempOral factors, health events occurring in 2015 and the influence to move from a voluntary to a mandatory system on data quality and transmission.

Investigation of a Two-Step Rotary Rim-Thickening Process of Disc-Like Blanks

2018 ◽  
Vol 920 ◽  
pp. 89-94
Author(s):  
Dao Kuan Wang ◽  
Jun Song Jin ◽  
Xin Yun Wang
Keyword(s):  
Cross Section ◽  
Fe Simulation ◽  
Forming Limit Diagram ◽  
Second Step ◽  
Forming Limit ◽  
Trial And Error ◽  
Rectangular Shape ◽  
Factors Influencing ◽  
Main Factors ◽  
The Stability

A two-step rotary rim-thickening process of disc-like blanks was investigated by FE simulation and spinning experiments. The preforming shape of cross section for first step was designed as trapezium before forming rectangular-shape rim in the second step. The main factors influencing the blank forming in the first step were groove bottom height h1 and the inclination angle α of the roller. With the increase of h1 and α of the roller in FE simulation, the workpiece will be more prone to lose stability and cause defects. The forming limit diagram was obtained in first step, including stable forming zone, unstable forming zone and failed forming zone. Considering the stability and efficiency of thickening, four groups of h1 and α were selected for the second step simulation. Maximum rim thickness (h2) after second-step forming was 9 mm, obtained by trial and error in FE simulations. The spinning experiments were carried out to verify the validity of numerical simulation.

Analysis on Affecting Factors of Controlling Surface Subsidence of Filling Mining

2012 ◽  
Vol 256-259 ◽  
pp. 61-64
Author(s):  
Yin Liu ◽  
Lin Hai Gao ◽  
Hai Yan Fan ◽  
Fei Yu ◽  
Meng Meng Dong
Keyword(s):  
Theoretical Analysis ◽  
Surface Subsidence ◽  
Mining Subsidence ◽  
Ecological Environment ◽  
Basic Method ◽  
Affecting Factors ◽  
Factors Influencing ◽  
Main Factors ◽  
The Impact ◽  
Cut And Fill

It is mining subsidence that causes the damage of ecological environment and the surface buildings. The basic method to relieve the damage is to controll surface subsidence effetely. For this problem, the thesis studied the characteristics of overlying rock failure through theoretical analysis, on the basis of the mechanism of surface subsidence. Then we obtained three main factors to subsidence which are sunken, compression, and lithological characters. According to the main factors influencing mining subsidence under cut and fill mining, then we reduce the impact from these factors successfully by taking appropriate measures to control it.

Reproduction potential-based differentiation of Russian regions

2020 ◽  
Vol 18 (7) ◽  
pp. 1304-1319
Author(s):  
M.V. Moroshkina
Keyword(s):  
Spatial Development ◽  
Uneven Development ◽  
Regional Differentiation ◽  
Russian Regions ◽  
Policy Documents ◽  
Factors Influencing ◽  
Strategic Policy ◽  
Main Factors ◽  
Per Capita ◽  
Research Period

Subject. This article examines the issues related to changes in reproduction capacity and heterogeneity of the development of Russian regions. Objectives. The article aims to assess regional differentiation and investigate the main factors influencing the uneven development of the areas. Methods. For the study, we used the methods of comparative and correlation analyses. Results. The article identifies groups of leading and lagging Russian regions and assesses the possibility of convergence of Russian regions according to the analyzed indicators, such as GRP, GRP per capita, and the output of industry. Conclusions. The results obtained can be used when preparing strategic policy documents, spatial development programmes and concepts. The observed heterogeneity suggests that the regions maintain their positions throughout the research period.

Current literature review on methods for measuring the stability of osseointegrable implants.

2020 ◽  
Vol 2 (4) ◽  
pp. 64-78
Author(s):  
Noha El-Wassefy ◽  
Lars Sennerby ◽  
Dhoom SIngh Mehta ◽  
Thiago De Santana Santos
Keyword(s):  
Literature Review ◽  
Current Literature ◽  
Implant Survival ◽  
Implant Stability ◽  
Implant Placement ◽  
Factors Influencing ◽  
Case Documentation ◽  
Bone To Implant Contact ◽  
The Stability

“Osseointegration” as formulated by Alberktson is crucial for implant survival and success. Osseointegration is a measure of implant stability. Measuring implant stability helps to arrive at decisions as to loading of an implant, allows choice of protocol on a patient to patient basis and provides better case documentation. A successful implant reflects good bone to implant contact and is determined by implant stability both primary and secondary. Implant stability is achieved at two different stages – primary (immediately after implant placement) and secondary (3-4 months after implant placement). Implant stability has been confirmed to affect the process of osseointegration and therefore is essential to understand the methods to measure implant stability and factors influencing. Various methods are developed to assess implant stability which suggests the prognosis of an implant.

Polymer composites as sensing materials for liquid organic solvents – preliminary results

e-Polymers ◽  
2011 ◽  
Vol 11 (1) ◽  
Author(s):  
Stanislaw Frackowiak ◽  
Monika Maciejewska ◽  
Andrzej Szczurek ◽  
Marek Kozlowski
Keyword(s):  
Electrical Resistivity ◽  
Carbon Black ◽  
Polymer Composites ◽  
Percolation Theory ◽  
Liquid Mixtures ◽  
Organic Liquids ◽  
Volumetric Fraction ◽  
Factors Influencing ◽  
Benzene Toluene ◽  
Main Factors

AbstractCarbon black-filled polymer composites were investigated as sensing materials for organic liquids. Polypropylene and polystyrene which were selected as matrices and various amounts of carbon black were considered as the main factors influencing sensitivity of the composites in view of the percolation theory. Disposable filaments were produced of these materials. Change in their electrical resistivity was measured upon immersion in benzene, toluene, xylene, ethylbenzene and their mixtures. It has been found that studied materials were sensitive to the composition of liquid mixtures of organic solvent. Relationships between the filament response and volumetric fraction of the components were presented. The studied materials have shown promising sensing properties, which suggest their applicability for identification and quantification of multicomponent organic liquids.

Sign in / Sign up

Export Citation Format

Share Document