The Effects of Injection Parameters on the Performance of Common Rail Light Duty Engine Fueled with Palm Oil Biodiesel

2013 ◽  
Vol 465-466 ◽  
pp. 322-326 ◽  
Author(s):  
M. Adlan Abdullah ◽  
Farid Nasir Ani ◽  
Masjuki Hassan
Keyword(s):  
Diesel Engine ◽  
Palm Oil ◽  
Fuel Economy ◽  
Fuel Injection ◽  
Control Strategies ◽  
Engine Performance ◽  
Common Rail ◽  
Injection Timing ◽  
Injection Duration ◽  
Injection Parameters

It is in the interest of proponents of biodiesel to increase the utilization of the renewable fuel. The similarities of the methyl ester properties to diesel fuel and its miscibility proved to be an attractive advantage. It is however generally accepted that there are some performance and emissions deficit when a diesel engine is operated with biodiesel. There are research efforts to improve the diesel engine design to optimize the combustion with biodiesel. Since the common rail engines operates on flexible injection strategies, there exist an opportunity to improve engine performance and offset the fuel economy deficit by means of optimizing the engine control strategies. This approach may prove to be more practical and easily implemented. This study investigated the effects of the fuel injection parameters - rail pressure, injection duration and injection timing - on a common rail passenger car engine in terms of the fuel economy. Palm oil based biodiesel up to 30% blend in diesel was used in this study. The end of injection, (EOI), was found to be the most important parameter for affecting fuel consumption and thermal efficiency.

scholarly journals Theoretical study to determine the proper injection system for upgrading fuel system of diesel engine om357 to common rail system

2018 ◽  
Vol 7 (4) ◽  
pp. 2594
Author(s):  
Razieh Pourdarbani ◽  
Ramin Aminfar
Keyword(s):  
Diesel Engine ◽  
Fuel Injection ◽  
Engine Performance ◽  
Injection Pressure ◽  
Common Rail ◽  
Injection System ◽  
Injection Timing ◽  
Common Rail System ◽  
Common Rail Injection System ◽  
Multi Stage

In this research, we tried to investigate all the fuel injection systems of diesel engines in order to select the most suitable fuel injection system for the OM357 diesel engine to achieve the highest efficiency, maximize output torque and reduce emissions and even reduce fuel consumption. The prevailing strategy for this study was to investigate the effect of injection pressure changes, injection timing and multi-stage injection. By comparing the engines equipped with common rail injection system, the proposed injector for engine OM357 is solenoid, due to the cost of this type of injector, MAP and controller (ECU). It is clear that this will not be possible only with the optimization of the injection system, and so other systems that influence engine performance such as the engine's respiratory system and combustion chamber shape, etc. should also be optimized. 

Diesel engine performance mapping using a parametrized mixing time model

2017 ◽  
Vol 19 (2) ◽  
pp. 202-213 ◽  
Author(s):  
Michal Pasternak ◽  
Fabian Mauss ◽  
Christian Klauer ◽  
Andrea Matrisciano
Keyword(s):  
Diesel Engine ◽  
Fuel Injection ◽  
Mixing Time ◽  
Combustion Process ◽  
Engine Performance ◽  
Injection Timing ◽  
Engine Control ◽  
Reactor Model ◽  
Time Model ◽  
Tabulated Chemistry

A numerical platform is presented for diesel engine performance mapping. The platform employs a zero-dimensional stochastic reactor model for the simulation of engine in-cylinder processes. n-Heptane is used as diesel surrogate for the modeling of fuel oxidation and emission formation. The overall simulation process is carried out in an automated manner using a genetic algorithm. The probability density function formulation of the stochastic reactor model enables an insight into the locality of turbulence–chemistry interactions that characterize the combustion process in diesel engines. The interactions are accounted for by the modeling of representative mixing time. The mixing time is parametrized with known engine operating parameters such as load, speed and fuel injection strategy. The detailed chemistry consideration and mixing time parametrization enable the extrapolation of engine performance parameters beyond the operating points used for model training. The results show that the model responds correctly to the changes of engine control parameters such as fuel injection timing and exhaust gas recirculation rate. It is demonstrated that the method developed can be applied to the prediction of engine load–speed maps for exhaust NOx, indicated mean effective pressure and fuel consumption. The maps can be derived from the limited experimental data available for model calibration. Significant speedup of the simulations process can be achieved using tabulated chemistry. Overall, the method presented can be considered as a bridge between the experimental works and the development of mean value engine models for engine control applications.

scholarly journals Modification of a Direct Injection Diesel Engine in Improving the Ignitability and Emissions of Diesel–Ethanol–Palm Oil Methyl Ester Blends

Energies ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2644 ◽  
Author(s):  
Norhidayah Mat Taib ◽  
Mohd Radzi Abu Mansor ◽  
Wan Mohd Faizal Wan Mahmood
Keyword(s):  
Diesel Engine ◽  
Methyl Ester ◽  
Ambient Temperature ◽  
Palm Oil ◽  
Compression Ratio ◽  
Direct Injection ◽  
Cetane Number ◽  
Engine Performance ◽  
Injection Timing ◽  
Injection Strategies

Blending diesel with biofuels, such as ethanol and palm oil methyl ester (PME), enhances the fuel properties and produces improved engine performance and low emissions. However, the presence of ethanol, which has a small cetane number and low heating value, reduces the fuel ignitability. This work aimed to study the effect of injection strategies, compression ratio (CR), and air intake temperature (Ti) modification on blend ignitability, combustion characteristics, and emissions. Moreover, the best composition of diesel–ethanol–PME blends and engine modification was selected. A simulation was also conducted using Converge CFD software based on a single-cylinder direct injection compression ignition Yanmar TF90 engine parameter. Diesel–ethanol–PME blends that consist of 10% ethanol with 40% PME (D50E10B40), D50E25B25, and D50E40B10 were selected and conducted on different injection strategies, compression ratios, and intake temperatures. The results show that shortening the injection duration and increasing the injected mass has no significant effect on ignition. Meanwhile, advancing the injection timing improves the ignitability but with weak ignition energy. Therefore, increasing the compression ratio and ambient temperature helps ignite the non-combustible blends due to the high temperature and pressure. This modification allowed the mixture to ignite with a minimum CR of 20 and Ti of 350 K. Thus, blending high ethanol contents in a diesel engine can be applied by advancing the injection, increasing the CR, and increasing the ambient temperature. From the emission comparison, the most suitable mixtures that can be operated in the engine without modification is D50E25B25, and the most appropriate modification on the engine is by increasing the ambient temperature at 350 K.

Design and Development of Double Helix Fuel Injection Pump for Four Stroke V-16 Rail Traction Diesel Engine

2007 ◽  
Author(s):  
A. K. Kathpal ◽  
Anirudh Gautam ◽  
Avinash Kumar Agarwal ◽  
R. Baskaran
Keyword(s):  
Diesel Engine ◽  
Fuel Economy ◽  
Fuel Injection ◽  
Double Helix ◽  
Fuel Efficiency ◽  
Injection System ◽  
Injection Timing ◽  
Fuel Injection System ◽  
Injection Pump ◽  
Fuel Injection Pump

The diesel fuel-injection system of ALCO DLW 251 engine consists of single cylinder injection pumps, delivery pipes, and fuel injector nozzles. Fuel injection into the combustion chamber through multi-hole nozzles delivers designed power and fuel efficiency. The two most important variables in a fuel injection system of a diesel engine are the injection pressure and injection timing. Proper timing of the injection process is essential for satisfactory diesel engine operation and performance. Injection timing needs to be optimised for an engine based on requirements of power, fuel economy, mechanical and thermal loading limitations, smoke and emissions etc. Since each of these requirements varies with the operating conditions, sometimes contrary to the requirements of the other parameters, the map of optimised injection timing can be very complex. The ALCO DLW 251 engine’s fuel injection pump is jerk type to permit accurate metering and timing of the fuel injected. The pump has a ported barrel and constant-stroke plunger incorporating a bottom helix for fuel delivery control with constant injection timing. From the point of view of good power and fuel economy, combustion should take place so that the peak firing pressure occurs at about 10–15° after TDC and is usually a few degrees after combustion starts. For this to happen, fuel should be injected at an appropriate time, depending on Injection delay and Ignition delay. Both these factors are dependent on the speed and load. Changing the operating point of the engine may change either one or both types of delay, altering the moment of start of combustion. Various researchers have shown that both the Injection and the Ignition delay are reduced as the engine speed is decreased resulting in advancement of injection timing at lower speeds (and loads). This condition will be corrected by varying the static injection timing, which can be achieved by providing a modified helix on the plunger to delay the start of fuel injection, for the lower speeds and loads. A new double helix (upper and lower helix) fuel injection pump for the ALCO DLW 251 16 V engine has been designed. The new fuel injection pump has been tested on the engine test cell at Research Designs & Standards Organisation and has shown an improvement of 1.2% in locomotive duty cycle fuel consumption. This paper describes the design & development of double helix fuel injection pump and discusses the engine tests completed to verify the projected improvements in fuel efficiency.

Effect of Injection System Parameters on Performance and Emission Characteristics of a Small Single Cylinder Diesel Engine

2021 ◽  
Vol 18 (2) ◽  
Author(s):  
D.K. Dond ◽  
N.P. Gulhane
Keyword(s):  
Diesel Engine ◽  
Fuel Injection ◽  
Direct Injection ◽  
Common Rail ◽  
Injection System ◽  
Injection Timing ◽  
Emission Characteristics ◽  
Performance And Emission ◽  
System Parameters ◽  
Main Injection

Limited fossil fuel reservoir capacity and pollution caused by them is the big problem in front of researchers. In the present paper, an attempt was made to find a solution to the same. The conventional fuel injection system was retrofitted with a simple version of the common rail direct injection system for the small diesel engine. Further, the effect of injection system parameters was observed on the performance and emission characteristics of the retrofitted common rail direct injection diesel engine. The parameters such as injection pressure, the start of pilot injection timing, the start of main injection timing and quantity of percentage fuel injection during the pilot and main injection period were considered for experimental investigation. It was observed that all the evaluated parameters were found vital for improving the engine’s performance and emission characteristics. The retrofitted common rail direct injection system shows an average 7% rise in brake thermal efficiency with economic, specific fuel consumption. At the same time, much more reduction in hydrocarbon, carbon monoxide and smoke opacity with a penalty of a slight increase in nitrogen oxides.

Determination of Static and Dynamic Injection Characteristics of a Common-Rail Direct Injection Diesel Engine Fuelled by CME-Diesel Blends

2017 ◽  
Author(s):  
Ervin Santos ◽  
Edwin Quiros
Keyword(s):  
Fuel Injection ◽  
Electronic Control Unit ◽  
Direct Injection ◽  
The Philippines ◽  
Common Rail ◽  
Injection Timing ◽  
Fuel Injector ◽  
Alternative Source ◽  
Injection Parameters ◽  
Significant Difference

Much interest is given to the research in biodiesel these days. It is renewable and has similar properties to conventional diesel. Biodiesel is also generally seen to produce less emissions, hence it is seen as an attractive and a greener alternative source of energy. Biodiesels are also referred to as Fatty Acid Methyl Esters (FAME). They are obtained from the transesterification of oils from organic products such as animal fat or vegetable oil. Common biodiesel feedstocks are soybean (USA), rapeseed (Europe), palm, and coconut (Asia). The Philippines, being one of the largest producers of coconut in the world, should have a substantial interest in this. Biodiesel in the Philippines is obtained from coconut oil and is commonly called Coconut Methyl Ester (CME). There is a number of research works available that study the effects of biodiesel when used to run diesel engines, although there is notably less studies on CME and particularly Philippine-CME available. This work aims to show the fuel injection timing and duration of a Common Rail Direct Injection (CRDI) engine run by CME-diesel with neat diesel as baseline. There are two sets of injection parameters that describe the injection behaviour of an engine. The static injection parameters refer to the electronic commands given out by the Electronic Control Unit (ECU) while the dynamic injection parameters refer to the actual physical injection happening in the fuel injector nozzle. Knowledge of these information may help explain possible differences in performance and/or emissions observed in biodiesel-fed engines. The static injection commands were obtained by tapping into the solenoid signal wire from the ECU. The dynamic injection parameters were estimated from line pressure signals in the fuel injection line. All the tests were done on the AVL Eddy Current Engine Dynamometer in the University of the Philippines Vehicle Research and Testing Laboratory. Baseline data were recorded from 100% neat diesel, then volumetric blends B10 (10% CME biodiesel and 90% neat diesel) and B20 (20% CME biodiesel and 80% neat diesel) were mixed for the tests. The CRDI engine was ran at full load, sweeping the operating range at 400 RPM increments from 800 to 4000. The results showed no significant difference in the static injection parameters of the CME-diesel blend-fed engines as compared to being ran with neat diesel. As for the dynamic injection parameters, there were some significant differences observed in the higher engine speeds starting at 2800 RPM. The observed changes were attributed to the differences in the physiochemical properties of CME biodiesel as compared to neat diesel.

Sign in / Sign up

Export Citation Format

Share Document