Numerical Analysis on Concrete Filled Steel Tube Supports Support Technology of III-Level South Roadway in Yangzhuang Mine

2013 ◽  
Vol 711 ◽  
pp. 385-390
Author(s):  
Hong Ying Zhang ◽  
Xue Bin Li ◽  
Zheng Xing Ma ◽  
Chao Wang ◽  
Zheng Ze Wang
Keyword(s):  
Simulation Analysis ◽  
Steel Tube ◽  
Surrounding Rock ◽  
Support Structure ◽  
Roadway Stability ◽  
Geological Conditions ◽  
Roadway Support ◽  
The Stability ◽  
Supporting Force ◽  
Core Concrete

Combined with engineering conditions of the III-level south roadway of Yangzhuang Mine, the deformation of surrounding rock and mechanical characteristics of support structure is analyzed by FLAC3D numerical simulation when the roadway is supported by CFSTS support program . The results shows that: For the weak mudstone surrounding rock and complex geological conditions, the deformation of surrounding rock is fast, large and unsymmetrical deformation, the bolt-net-shotcrete support is difficult to maintain the roadway stability. the CFSTS used Φ219 ×8mm steel tube filled with C50 core concrete, which provides powerful supporting force combined with other roadway support ways and restrict surrounding rock to the roadway space. By FLAC3D simulation analysis shows, the deformation of surrounding rock is small and support structure is mad good use and keep work, which can maintain the stability of roadway.

Study and Application of Three-Step Supporting Design Method in Coal Roadway

2013 ◽  
Vol 353-356 ◽  
pp. 252-257
Author(s):  
Ren Liang Shan ◽  
Xiang Song Kong ◽  
Ji Jun Zhou ◽  
Wen Feng Zhao ◽  
Yu Tao ◽  
...  
Keyword(s):  
Design Method ◽  
Surrounding Rock ◽  
Second Step ◽  
Preliminary Design ◽  
The Third ◽  
Coal Roadway ◽  
Roadway Stability ◽  
Simulation Calculation ◽  
Roadway Support ◽  
The Stability

Scientific supporting design is of great significance to ensure coal roadway stability. The three-step supporting design method is put forward for coal roadway support: The first step is preliminary design, determine the range of each supporting parameter according to the theoretical calculation and supporting experiences; the second step is numerical simulation calculation, choose the reasonable one through the comparison of schemes; the third step is field monitoring, verify the scheme applicability. After applying the three-step supporting design method to study 3# coal seam roadway in Guandi mine, the optimal supporting scheme is obtained, and good results of underground roadway are achieved, which ensure the stability of roadway surrounding rock. Meanwhile, some rules are summarized which provide references for future roadway supporting design.

scholarly journals Mechanism and Procedure of Repeated Borehole Drilling Using Wall Protection and a Soft Structure to Prevent Rockburst: A Case Study

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Yongliang He ◽  
Mingshi Gao ◽  
Xu Dong ◽  
Xin Yu
Keyword(s):  
Energy Absorption ◽  
Control Method ◽  
Stability Control ◽  
Surrounding Rock ◽  
Support Structure ◽  
Geological Conditions ◽  
Borehole Drilling ◽  
The Stability ◽  
Mine Roadways

With the increasing mining depth of coal mines, the occurrence of rockburst, especially in mine roadways, is becoming critical as a severe dynamic disaster. This paper explores the stability control of deep mine roadways and solves the contradiction between the support and pressure relief of roadways by studying the use of an internal steel pipe for wall protection and a soft structure for energy absorption during repeated borehole drilling. Numerical simulations are performed to examine the effects of active support technology on the support structure during repeated drilling. Internal steel pipes can effectively prevent the support structure from being damaged. When the soft structure cracks, the energy transmitted from the rockburst to the roadway is significantly reduced. According to the deformation and failure characteristics of the surrounding rock of the 21170 roadway, the combination of anchor active support, hydraulic lifting shed support, and soft structure energy absorption is proposed. An engineering case study shows that the support method can effectively maintain the stability of the surrounding rock and ensure the safe mining of the working face. The proposed control method can provide reference for the prevention and control of rockburst in mine roadways under similar geological conditions.

Combined Support Technology with Bolt, Steel Mesh and Anchor Applied in Baoxin Coal Mine

2014 ◽  
Vol 672-674 ◽  
pp. 1818-1822
Author(s):  
Bao Sheng Song ◽  
Dan Yang Jing ◽  
Shi Ting Zhu ◽  
Lin Lin Chen
Keyword(s):  
Coal Mine ◽  
Simulation Analysis ◽  
Confining Pressure ◽  
Surrounding Rock ◽  
Support Program ◽  
Control Effect ◽  
Steel Mesh ◽  
Geological Conditions ◽  
The Stability ◽  
Bolt Steel

For the caving danger of the haulage roadway with thin and broken coal roof in Baoxin coal mine, the combined support technology with bolt, steel mesh and anchor was proposed. According to the geological conditions of the mine, the appropriate support program was determined. The simulation analysis by FLAC3D software showed that the program could effectively increase the roadway confining pressure, reduce roadway displacement and deformation, and thus keep the stability of the surrounding rock. Site practice showed that the support program was feasible and the control effect was good.

scholarly journals Study on instability failure mode and monitoring early warning standard of surrounding rock in fully weathered argillaceous sandstone section of large section tunnel

2019 ◽  
Vol 136 ◽  
pp. 04023
Author(s):  
Ming Zhao ◽  
Ke Li ◽  
Hong Yan Guo ◽  
KaiCheng Hua
Keyword(s):  
Limit State ◽  
Stable State ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Large Section ◽  
Rock Stability ◽  
Geological Conditions ◽  
Construction Step ◽  
The Face ◽  
The Stability

Based on the special geological conditions of a tunnel in Qingyuan section of Huizhou-Zhanzhou Expressway, FLAC3d numerical simulation software is used to simulate the rheological properties and instability of surrounding rock in large-section fully weathered sandstone section, and the stability and loss of surrounding rock are analyzed. The deformation of the dome and the face at steady state is analyzed. It is found that: 1) when the surrounding rock is in a stable state, the deformation curve of the dome is smooth. When the surrounding rock of the face is unstable, the front of the face appears ahead. Deformation should be first strengthened on the surrounding rock in front of the face. 2) The arched foot is an important part of the instability of the surrounding rock. In order to prevent the expansion of the collapsed part, the arched part should be reinforced. 3) In order to obtain the limit state of surrounding rock stability, the strength of surrounding rock is reduced, and the strength reduction coefficient corresponding to the displacement sudden point is taken as the safety factor of rock stability around the hole, and the stability safety coefficients of surrounding rock of each construction step are greater than 1.2. 4) The dynamic standard values of deformation control in the whole construction stage are obtained by analyzing the deformation curves of each data monitoring point with time in the corresponding time period of each construction step.

scholarly journals Numerical Simulation on Large Deformation of Weak Rock Mass Tunnel Under High Geostress

2018 ◽  
Vol 175 ◽  
pp. 03025
Author(s):  
Feng Zhou ◽  
Hongjian Jiang ◽  
Xiaorui Wang
Keyword(s):  
Rock Mass ◽  
Large Deformation ◽  
Lateral Pressure ◽  
Simulation Analysis ◽  
Pressure Coefficient ◽  
Surrounding Rock ◽  
Analog Simulation ◽  
Lateral Pressure Coefficient ◽  
High Geostress ◽  
The Stability

The problem about the stability of tunnel surrounding rock is always an important research object of geotechnical engineering, and the right or wrong of the result from stability analysis on surrounding rock is related to success or failure of an underground project. In order to study the deformation rules of weak surrounding rock along with lateral pressure coefficient and burying depth varying under high geostress and discuss the dynamic variation trend of surrounding rock, the paper based on the application of finite difference software of FLAC3D, which can describe large deformation character of rock mass, analog simulation analysis of surrounding rock typical section of the class II was proceeded. Some conclusions were drawn as follows: (1) when burying depth is invariable, the displacements of tunnel surrounding rock have a trend of increasing first and then decreasing along with increasing of lateral pressure coefficient. The floor heave is the most sensitive to change of lateral pressure coefficient. The horizontal convergence takes second place. The vault subsidence is feeblish to change of lateral pressure coefficient. (2) The displacements of tunnel surrounding rock have some extend increase along with increasing of burying depth. The research conclusions are very effective in analyzing the stability of surrounding rock of Yunling tunnel. These are going to be a reference to tunnel supporting design and construction.

Mechanics Analysis of Grade V Surrounding Rock Primary Support in Maanziliang Tunnel

2012 ◽  
Vol 164 ◽  
pp. 414-417
Author(s):  
Jia Ming Han
Keyword(s):  
Finite Element ◽  
Safety Factor ◽  
Surrounding Rock ◽  
Qinling Mountains ◽  
The Finite Element Method ◽  
Highway Tunnel ◽  
Geological Conditions ◽  
The Stability ◽  
Primary Support ◽  
Rock Section

Commonly used finite element strength reduction to calculate the safety factor of slope，to analyze the stability of the slope[1～3]. Recently it also proposed the methods to evaluate the safety factor for the stability of surrounding rock of underground chambers and supporting structural mechanics[4～6]. For Qinling Mountains of the complex geological conditions in the Maanziliang highway tunnel, this article use the finite element method from the bolt resist tension, bolt length, the force of sprayed layer of concrete to computing gradeⅤsurrounding rock section of primary support safety factor, to give evaluation to support mechanics of the Maanziliang tunnel.

The Monitoring and Numerical Simulation Analysis on the Construction of a Shallow Underpass

2014 ◽  
Vol 580-583 ◽  
pp. 1056-1060
Author(s):  
Li Sheng Liu ◽  
Jie Zhao
Keyword(s):  
Simulation Analysis ◽  
Dynamic Monitoring ◽  
Ground Settlement ◽  
Control Effect ◽  
Influence Curves ◽  
Geological Conditions ◽  
Vertical Ground ◽  
The Stability ◽  
Underground Passage ◽  
Strain Model

Based on the dynamic monitoring project of one underpass in Dalian, this paper tries to validate the control effect of the ground settlement on the stability of tunnel surrounding rocks during construction of underground passage under urban arterial road by means of analyzing the vertical ground settlement curves, convergence curves of tunnel inner perimeter and vault displacement curves. With the numerical calculation tool of the software FLAC, it also analyzes the construction of XS-2 # cross-section which was in the south side of the whole construction section at different stages by adopting the plane-strain model. Therefore, we can get the influence curves of ground settlement under different construction stages with considering the release of stress. The simulation results are basically consistent with the measured data, which has a great significance for the subsequent design and construction of underground projects with similar geological conditions.

scholarly journals The Stability of Gob-Side Entry Retaining in a High-Gas-Risk Mine

2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Junwen Zhang ◽  
Yulin Li
Keyword(s):  
Coal Mines ◽  
Surrounding Rock ◽  
Shanxi Province ◽  
Engineering Practice ◽  
Efficient Production ◽  
Coal Recovery ◽  
Working Face ◽  
Geological Conditions ◽  
The Stability ◽  
Strengthening Technique

There are series of problems faced by most of the coal mines in China, ranging from low-coal recovery rate and strained replacement of working faces to gas accumulation in the upper corner of coalfaces. Based on the gob-side entry retaining at the No. 18205 working face in a coal mine in Shanxi Province, theoretical analysis, numerical simulation, and engineering practice were comprehensively used to study the mechanical characteristics of the influence of the width of the filling body beside the roadway and the stability of surrounding rock in a high-gas-risk mine. The rational width of the filling body beside the roadway was determined, and a concrete roadway-side support with a headed reinforcement-integrated strengthening technique was proposed, which have been applied in engineering practice. The stability of the filling body beside the roadway is mainly influenced by the movement of the overlying rock strata, and the stability of the surrounding rock can be improved effectively by rationally determining the width of the filling body beside the roadway. When the width of the roadway-side filling body is 2.5 m, the surrounding rock convergence of the gob-side entry retaining is relatively small at only 5% of the convergence ratio. It has been shown that the figure for roof separation is relatively low, and strata behaviors are relatively alleviated and gas density do not exceed the limit, which are the best results of gob-side entry retaining. The results of this research can provide theoretical guidance for excavation of coal mines with similar geological conditions and have some referential significance to safety and efficient production in coal mines.

Coal Seam Roadway Bolt Support Design Method Based on the Supporting Theory of Broken Rock Zone

2013 ◽  
Vol 734-737 ◽  
pp. 535-539
Author(s):  
Hai Yuan Liu ◽  
Zhi Gang Wang ◽  
Ji Li ◽  
Lang Bai
Keyword(s):  
Theoretical Foundation ◽  
Design Method ◽  
Field Application ◽  
Surrounding Rock ◽  
Support Design ◽  
Roadway Support ◽  
The Stability ◽  
Comprehensive Classification ◽  
Classification Index ◽  
Surrounding Rock Deformation

broken rock zone is the main reason for the convergence of surrounding rock deformation, and its thickness not only is a reflection of many factors which influence the stability of surrounding rock, but also is the results of the interaction of many factors, a comprehensive classification index. Roadway support design based on classification result of broken rock zone, has a solid theoretical foundation, and the field application effect is remarkable.

Analysis of Seepage Field of Highway Tunnel Excavation by Finite Difference Method

2014 ◽  
Vol 638-640 ◽  
pp. 798-803
Author(s):  
Yong Tao Zhang
Keyword(s):  
Finite Difference ◽  
Circulatory System ◽  
Surrounding Rock ◽  
Design Parameters ◽  
Seepage Field ◽  
Tunnel Excavation ◽  
Highway Tunnel ◽  
Geological Conditions ◽  
Fracture Development ◽  
The Stability

As the excavation of tunnels, there are new channels of the groundwater drainage. The original supply of the circulatory system has been destroyed. The effects of groundwater to rock mass of surrounding rock are aggravated. In this paper, combined with a new highway tunnel project, the model is built according to the design parameters and the site engineering geological conditions of the tunnel. The fluid-structure interaction module of the finite difference software FLAC3D is used for the research on tunnel excavation. The distribution of seepage field, the stability of surrounding rock and rock deformation under saturated conditions during the tunnel excavation have been analyzed. The simulation results have certain guiding meaning on fracture development, the stability design of tunnels in water-rich stratum and the design and construction of anti-drainage.

Sign in / Sign up

Export Citation Format

Share Document