3D Simulation Analysis of Sedimentation of Superhigh Fill

2015 ◽  
Vol 744-746 ◽  
pp. 400-406
Author(s):  
Bi Hong Song ◽  
Jin Chao Yang ◽  
Qing Chen ◽  
Jian Hua Chen ◽  
Da Li
Keyword(s):  
Simulation Analysis ◽  
3D Simulation ◽  
Project Design ◽  
Stable Operation ◽  
Mountainous Areas ◽  
Safe Operation ◽  
Road Base ◽  
The Stability ◽  
Simulated Calculation ◽  
Topographic Relief

The sedimentation deformation of superhigh fill in the mountainous areas is very complicated in law, and will be influenced the topographic relief, and it is specially outstanding for the sedimentation of high-fill project. For the significant project such as airport and road base, in order to guarantee the safe operation of the project during use, it is required to strictly control the post-construction and uneven sedimentation. Therefore, the stability of superhigh fill has become the key to influence the safety and stable operation of projects. In this paper, a simulated calculation is conducted to the ultrahigh fill of expansion project of an airport in Chongqing to analyze its stability, so as to provide references for the project design and construction.

Summary of the Stability Chanllenges and Safe Operation of Power Systems in View of Dispatching

2014 ◽  
Vol 960-961 ◽  
pp. 1588-1591
Author(s):  
Xiang Dong Zhao ◽  
Xin Zhao ◽  
Ming Jun Lv ◽  
Jian Guo Liu ◽  
Feng Zhen Liu ◽  
...  
Keyword(s):  
Power Systems ◽  
Power System ◽  
Rapid Development ◽  
Power Grids ◽  
System Stability ◽  
Stable Operation ◽  
Safe Operation ◽  
The Stability ◽  
Continuous Power ◽  
Grid Market

The Internet and the gradual implementation of the continuous power grid market in recent years make the power system more complex under different operating environment. Safe and stable operation of power grids have become increasingly important . With the rapidf development of the grid and constant innovation, safe and stable operation also has a new requirement , because the rapid development of the power system brings more This paper analyzes the causes of blackouts and reviews security of the power system stability problems related to measures on the security and stability of the power system operation .

scholarly journals Distributed Autonomous Economic Control Strategy for Microgrid Considering Event Triggering Mechanism

2021 ◽  
Author(s):  
Yulong Xiong ◽  
Shihong Miao ◽  
Weichen Yang ◽  
Zhiwei Liu
Keyword(s):  
Control Strategy ◽  
Simulation Analysis ◽  
Function Analysis ◽  
Active Power ◽  
Stable Operation ◽  
Triggering Mechanism ◽  
Event Triggering ◽  
Economic Control ◽  
Event Trigger ◽  
The Stability

To fully adapt to the distributed access of renewable energy, microgrid technology has been developed rapidly. Aiming at the coordination and efficient regulation of distributed resources in microgrid, this paper proposes a distributed autonomous economic control strategy for microgrid considering event triggering mechanism. First, a distributed autonomous economic control architecture is built to provide a distributed operation architecture for optimal regulation of the microgrid. Secondly, a distributed secondary control strategy based on the consensus control theory is established to realize the economic allocation of active power as well as safe and stable operation of the microgrid. On this basis, an event trigger protocol based on the consensus error of the control variables is constructed, which is conductive to reduce redundant communication. The stability of the event trigger protocol is deduced by means of Lyapunov function analysis. The simulation analysis based on the equivalent microgrid verifies that the proposed control strategy can reduce redundant communication and acquire fair distribution of reactive power and active power among DGs, realizing distributed, economical and safe operation of microgrid.

Improving the methods to improve the stability of hydrotechnical structures in Yakutia

2020 ◽  
pp. 37-39
Author(s):  
M LOSKIN
Keyword(s):  
Agricultural Production ◽  
Hydraulic Engineering ◽  
Process Water ◽  
Small Rivers ◽  
Limiting Factor ◽  
Safe Operation ◽  
Central Yakutia ◽  
Agricultural Water Supply ◽  
Temperature Impact ◽  
The Stability

Problems of providing the population and agricultural production by qualitative potable and process water in the Central Yakutia are covered. This territory belongs to the region with acute shortage of water resources which is always a limiting factor of development of agricultural production. For the solution of this burning issue in the 80th years of the last century along the small rivers the systems of hydraulic engineering constructions providing requirements with process water practically of all settlements of the Central Yakutia were constructed. At a construction of all hydraulic engineering buildings the method of construction with preservation of soils of the basis of constructions in a frozen state was applied. When warming the climate which is observed in recent years hydraulic engineering constructions built in regions of a wide spread occurance of breeds of an ice complex and with the considerable volume of water weight, were especially vulnerable. On character and a design they experience continuous threat of damage and demand very attentive relation from the operating organizations. Taking this into account, safe operation of hydraulic engineering constructions in a zone of distribution of permafrost breeds demands new approaches. The article examines features of hydraulic engineering constructions’ operation of agricultural water supply objects in the Central Yakutia. Distinctiveness of hydraulic engineering constructions’ operation is that stability of constructions is intimately bound to temperature impact of a reservoir on ground dams’ body and the basis of constructions. The possibility of inclusion of ways for an intensification of a freezing of constructions in the structure of operational actions is studied. The new method on safe operation of hydraulic engineering constructions as prewinter abatement of the water level in a reservoir accounting volumes and norms of water consumption of the settlement is offered.

The anaerobic treatment of a ligno-cellulosic substrate offering little natural pH buffering capacity

1998 ◽  
Vol 38 (4-5) ◽  
pp. 29-35 ◽  
Author(s):  
C. J. Banks ◽  
P. N. Humphreys
Keyword(s):  
Ph Control ◽  
Anaerobic Treatment ◽  
Buffering Capacity ◽  
Single Stage ◽  
Stable Operation ◽  
Reactor Performance ◽  
Two Stage ◽  
Ph Buffering ◽  
Stage System ◽  
The Stability

The stability and operational performance of single stage digestion with and without liquor recycle and two stage digestion were assessed using a mixture of paper and wood as the digestion substrate. Attempts to maintain stable digestion in both single stage reactors were unsuccessful due to the inherently low natural buffering capacity exhibited; this resulted in a rapid souring of the reactor due to unbuffered volatile fatty acid (VFA) accumulation. The use of lime to control pH was unsatisfactory due to interference with the carbonate/bicarbonate equilibrium resulting in wide oscillations in the control parameter. The two stage system overcame the pH stability problems allowing stable operation for a period of 200 days without any requirement for pH control; this was attributed to the rapid flushing of VFA from the first stage reactor into the second stage, where efficient conversion to methane was established. Reactor performance was judged to be satisfactory with the breakdown of 53% of influent volatile solids. It was concluded that the reactor configuration of the two stage system offers the potential for the treatment of cellulosic wastes with a sub-optimal carbon to nitrogen ratio for conventional digestion.

scholarly journals Stability Analysis of Different Regulation Modes of Hydropower Units

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1933
Author(s):  
Xinran Guo ◽  
Yuanchu Cheng ◽  
Jiada Wei ◽  
Yitian Luo
Keyword(s):  
Stable Operation ◽  
Rotor Speed ◽  
Frequency Range ◽  
Power Regulation ◽  
Normal Frequency ◽  
Dynamic Performances ◽  
Negative Damping ◽  
The Stability ◽  
Regulation Mode ◽  
Water Inertia

The dynamic characteristics of hydropower unit governing systems considerably influence the stability of hydropower units and the connected power system. The dynamic performances of hydropower units with power regulation mode (PRM) and opening regulation mode (ORM) are different. This paper establishes a detailed linear model of a hydropower unit based on the Phillips–Heffron model. The damping characteristic and stability of two regulation modes with different water inertia time constants TW were analyzed. ORM tended to provide negative damping, while PRM often provided positive damping in the major parts of the frequency range within the normal frequency oscillations when TW was large. Eigenvalue analysis illustrated that PRM has better stability than ORM. To validate the analysis, a simulation under two typical faults WAS conducted based on a nonlinear model of a hydropower unit. The simulation results illustrated that the responses of units with PRM are more stable in terms of important operating parameters, such as output power, rotor speed, and power angles. For hydropower units facing challenges in stable operation, PRM is recommended to obtain good dynamic stability.

scholarly journals Asymmetry underlies stability in power grids

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Ferenc Molnar ◽  
Takashi Nishikawa ◽  
Adilson E. Motter
Keyword(s):  
Symmetry Breaking ◽  
Real World ◽  
Power Grids ◽  
Stable Operation ◽  
World Systems ◽  
Symmetric State ◽  
Network Systems ◽  
Additional Improvement ◽  
The Stability ◽  
General Method

AbstractBehavioral homogeneity is often critical for the functioning of network systems of interacting entities. In power grids, whose stable operation requires generator frequencies to be synchronized—and thus homogeneous—across the network, previous work suggests that the stability of synchronous states can be improved by making the generators homogeneous. Here, we show that a substantial additional improvement is possible by instead making the generators suitably heterogeneous. We develop a general method for attributing this counterintuitive effect to converse symmetry breaking, a recently established phenomenon in which the system must be asymmetric to maintain a stable symmetric state. These findings constitute the first demonstration of converse symmetry breaking in real-world systems, and our method promises to enable identification of this phenomenon in other networks whose functions rely on behavioral homogeneity.

Chaos control of permanent magnet synchronous motor using simple controllers

2018 ◽  
Vol 41 (8) ◽  
pp. 2352-2364 ◽  
Author(s):  
Arif Iqbal ◽  
Girish Kumar Singh
Keyword(s):  
Permanent Magnet ◽  
Chaos Control ◽  
Permanent Magnet Synchronous Motor ◽  
Synchronous Motor ◽  
Industrial Applications ◽  
Stable Operation ◽  
Comparative Performance ◽  
Experimental Implementation ◽  
Chaotic Characteristic ◽  
The Stability

Owing to the superior properties and stable operation, the Permanent Magnet Synchronous Motor (PMSM) is preferably used in wide industrial applications. But, the stability of motor is found to be dependent on its initial operating condition, showing the chaotic characteristic. Therefore, this paper addresses the chaos control of PMSM by developing four simple but effective controllers, which are mathematically designed by using the principle of Lyapunov’s method for asymptotic global stability. A comparative performance assessment has been carried out for the developed controllers in terms of settling time and peak over shoot. Furthermore, the concept of conventional proportional-integration type controller has been extended to develop two more controllers for chaos control of PMSM. Numerical simulation has been carried out in Matlab environment for performance evaluation of developed controllers. The obtained analytical results have been validated through experimental implementation in real time environment on Multisim/Ultiboard platform.

scholarly journals Numerical Simulation on Large Deformation of Weak Rock Mass Tunnel Under High Geostress

2018 ◽  
Vol 175 ◽  
pp. 03025
Author(s):  
Feng Zhou ◽  
Hongjian Jiang ◽  
Xiaorui Wang
Keyword(s):  
Rock Mass ◽  
Large Deformation ◽  
Lateral Pressure ◽  
Simulation Analysis ◽  
Pressure Coefficient ◽  
Surrounding Rock ◽  
Analog Simulation ◽  
Lateral Pressure Coefficient ◽  
High Geostress ◽  
The Stability

The problem about the stability of tunnel surrounding rock is always an important research object of geotechnical engineering, and the right or wrong of the result from stability analysis on surrounding rock is related to success or failure of an underground project. In order to study the deformation rules of weak surrounding rock along with lateral pressure coefficient and burying depth varying under high geostress and discuss the dynamic variation trend of surrounding rock, the paper based on the application of finite difference software of FLAC3D, which can describe large deformation character of rock mass, analog simulation analysis of surrounding rock typical section of the class II was proceeded. Some conclusions were drawn as follows: (1) when burying depth is invariable, the displacements of tunnel surrounding rock have a trend of increasing first and then decreasing along with increasing of lateral pressure coefficient. The floor heave is the most sensitive to change of lateral pressure coefficient. The horizontal convergence takes second place. The vault subsidence is feeblish to change of lateral pressure coefficient. (2) The displacements of tunnel surrounding rock have some extend increase along with increasing of burying depth. The research conclusions are very effective in analyzing the stability of surrounding rock of Yunling tunnel. These are going to be a reference to tunnel supporting design and construction.

The Stability Analysis of Slope of Shegang Protecting Dyke

2011 ◽  
Vol 261-263 ◽  
pp. 1841-1845
Author(s):  
Hui Qin Yao
Keyword(s):  
Stability Analysis ◽  
Working Conditions ◽  
Saturation Line ◽  
Dam Safety ◽  
Design Code ◽  
Embankment Dam ◽  
Safe Operation ◽  
Calculation Results ◽  
The Stability ◽  
Reinforcement Design

Appraisal of dam slope safety is essential for security and stability of the dyke that has been constructed for many years. According to the requirements of the appraisal of dam safety, the stability analysis of slope of Shegang dyke has been carried out by using Sweden circular-arc method, Bishop method, Engineer Corps method and Lowe method four methods under many kinds of working conditions and some conditions when the saturation line raising. Combined with the design code form embankment dam, the calculation results can be analyzed. The analysis can show that the security indexes of anti-slide under four kinds of working conditions and some conditions when the saturation line raising meet the requirements of the design code. This can provide basis for the reinforcement design of the dam, which also has a certain directive significance for the safe operation and observation of the dam in the future.

Mid-Term Stability Assessment of Jiangxi Power Grid

2013 ◽  
Vol 732-733 ◽  
pp. 882-887
Author(s):  
Yong Chun Su ◽  
Hao Wei Jia
Keyword(s):  
Power System ◽  
Power Grid ◽  
Assessment Method ◽  
Control Measures ◽  
Assessment Process ◽  
Jiangxi Province ◽  
Stable Operation ◽  
Stability Assessment ◽  
Term Stability ◽  
The Stability

Mid-term stability assessment is an important work to support power system operation in a province power grid of China every year. The stability assessment method and process was introduced in this paper. As an example, the stability of Jiangxi province power system was evaluated in the following two years. Weak area and weak transmission line were found out in each power supply area. Prevention and control measures were proposed. According to problems among the assessment process and using the state monitoring data, an approach was discussed to increase the assessment result accuracy. The analysis conclusion provides the reference to the safe and stable operation of Jiangxi power system.

Sign in / Sign up

Export Citation Format

Share Document