Hybrid Renewable Energy Systems in Saudi Arabia

2015 ◽  
Vol 781 ◽  
pp. 284-287
Author(s):  
Hisham El Khashab ◽  
Mohammed Al Ghamedi
Keyword(s):  
Saudi Arabia ◽  
Renewable Energy ◽  
Energy Demand ◽  
Energy Savings ◽  
New Technologies ◽  
Low Cost ◽  
Renewable Energy Sources ◽  
Arab Countries ◽  
High Tech ◽  
Energy Problem

The continuous rise of energy demand worldwide combined with the decrease of natural resources such as fossil fuel represents a huge energy problem which facing humanity. Industry as well as consumers must rethink how to produce energy at low cost price. Renewable Energy (RE) applications and energy savings are keys to meet this challenge in a sustainable way. In the hot and sunny areas of the Arab countries, renewable sources like solar energy can play a role to slove energy problem. According to that the renewable energy sources such as photovoltaic, wind, biomass, etc… have an important role especially when the (high-tech.) new technologies can interfere. This paper investigates RE sources applications at Yanbu, Saudi Arabia, besides a simulation using HOMER software to three proposed systems newly erected in Yanbu Industrial College Renewable Energy (RE) lab. The lab represents a hybrid system, composed of PV, wind turbine, and Fuel cell systems. The cost of energy is compared in the three systems to compare the generated energy cost. This study is to evaluate the actual cost of RE sources in developing countries. The climatic variations at Yanbu that is located on the west coast of Saudi Arabia are considered.

scholarly journals Combination of renewable energy in the refinery, with carbon emissions approach

2020 ◽  
Vol 10 (4) ◽  
pp. 5780-5786 ◽  
Keyword(s):  
Renewable Energy ◽  
Crude Oil ◽  
Carbon Dioxide Emissions ◽  
Energy Demand ◽  
Low Cost ◽  
Renewable Energy Sources ◽  
Economic Feasibility ◽  
Energy Sources ◽  
Global Energy ◽  
Wind Potential

With increasing global energy demand and lower energy efficiency for inverted energy (EROEI) for crude oil, global energy consumption by the O&G industry has increased dramatically in recent years. Moreover, this increased energy has led to an increase in greenhouse gas emissions, which has had negative environmental impacts. On the other hand, generating electricity through renewable resources has become a relatively competitive cost for fossil energy sources in a "cleaner" way. In this study, renewable energy is optimally combined into the refinery, taking into account costs and carbon dioxide emissions. Using Aspen HYSYS, a refinery in the Middle East was stimulated to estimate energy demand by different processing units. The L.P. problem is formulated based on the existing solar energy systems and wind potential in the region. The multipurpose function, which reduces cost and CO2 emissions, was resolved using GAMS to determine the optimum energy distribution from each power source to units inside the refinery. Besides, an economic feasibility study was conducted to determine the feasibility of implementing a renewable energy technology project to bypass the refinery's energy requirements. Electricity generation through all renewable energy sources considered (i.e., solar P.V., CSP, and wind) was considered feasible based on the low cost of electricity (LCOE). The payback period for the CSP project, which has an annual capacity of about 411 GWh and a useful life of 30 years, was ten years. In contrast, the solar P.V. and wind recovery periods were calculated at 7 and 6 years, respectively. This opens up possibilities for incorporating renewable energy into the refining sector, as well as for improving multiple energy transmission systems in the crude oil industry.

Sustainable Development of Green Energy Technologies in the Republic of Sudan

Green ◽  
2011 ◽  
Vol 1 (4) ◽  
Author(s):  
Abdeen Mustafa Omer
Keyword(s):  
Renewable Energy ◽  
Wind Energy ◽  
Rural Areas ◽  
Energy Demand ◽  
New Technologies ◽  
Renewable Energy Sources ◽  
Regional Distribution ◽  
Green Energy ◽  
Energy Sources ◽  
Wide Range

AbstractSudan is an agricultural country with fertile soil and ample water resources, as well as livestock and forestry resources, and agricultural residues. Energy is one of the key factors in the development of Sudan's national economy. We present an overview of the energy situation in Sudan, with reference to its end uses and its regional distribution. We separate energy sources into two main types: conventional energy (biomass, petroleum products, and electricity) and non-conventional energy (solar power, wind energy, hydro-electric, etc.). Sudan has a relatively high abundance of sunshine and solar radiation, and has moderate biomass, hydro-electric and wind energy resources. Exploiting the available new and renewable energy sources to provide part of the local energy demand, as alternatives to conventional fossil energy, has become a major issue in Sudan's strategic planning of future energy policies. Sudan presents an important case study with respect to renewable energy, as it has a long history of meeting its energy needs by use of renewable sources; Sudan's portfolio is broad and diverse, due in part to the country's wide range of climates and landscapes. Like many African frontrunners in the utilisation of renewable energy, Sudan has a well-defined commitment to continue research, development, and implementation of new technologies. Sustainable low-carbon energy scenarios in the new century emphasize the importance of exploiting the untapped potential of renewable resources. Sudan's rural areas in particular, can benefit from this transition. The increased availability of reliable and efficient energy services will stimulate the development of new alternatives. We conclude that using renewable, environmentally friendly energy must be encouraged, promoted, implemented, and demonstrated by full-scale energy plants or collection devices, in particular for use in remote rural areas.

scholarly journals Resource Assessment and Techno-Economic Analysis of a Grid-Connected Solar PV-Wind Hybrid System for Different Locations in Saudi Arabia

2018 ◽  
Vol 10 (10) ◽  
pp. 3690 ◽  
Author(s):  
Yahya Alharthi ◽  
Mahbube Siddiki ◽  
Ghulam Chaudhry
Keyword(s):  
Saudi Arabia ◽  
Renewable Energy ◽  
Hybrid System ◽  
Energy Demand ◽  
Power Plants ◽  
Meteorological Data ◽  
Renewable Energy Sources ◽  
Peak Load ◽  
Solar Pv ◽  
Renewable Energy Resources

The economic growth and demographic progression in Saudi Arabia increased spending on the development of conventional power plants to meet the national energy demand. The conventional generation and continued use of fossil fuels as the main source of electricity will raise the operational environmental impact of electricity generation. Therefore, using different renewable energy sources might be a solution to this issue. In this study, a grid-connected solar PV-wind hybrid energy system has been designed considering an average community load demand of 15,000 kWh/day and a peak load of 2395 kW. HOMER software is used to assess the potential of renewable energy resources and perform the technical and economic analyses of the grid-connected hybrid system. The meteorological data was collected from the Renewable Resources Atlas developed by the King Abdullah City of Atomic and Renewable Energy (KACARE). Four different cities in the Kingdom of Saudi Arabia, namely, the cities of Riyadh, Hafar Albatin, Sharurah, and Yanbu were selected to do the analyses. The simulation results show that the proposed system is economically and environmentally feasible at Yanbu city. The system at this city has the lowest net present cost (NPC) and levelized the cost of energy (LCOE), highest total energy that can be sold to the grid, as well as the lowest CO2 emissions due to a highly renewable energy penetration. This grid-connected hybrid system with the proposed configuration is applicable for similar meteorological and environmental conditions in the region, and around the world. Reduction of some greenhouse gasses as well as the reduction of energy costs are main contributors of this research.

scholarly journals Techno-Economic Analysis of a Novel Hydrogen-Based Hybrid Renewable Energy System for Both Grid-Tied and Off-Grid Power Supply in Japan: The Case of Fukushima Prefecture

2020 ◽  
Vol 10 (12) ◽  
pp. 4061 ◽  
Author(s):  
Naoto Takatsu ◽  
Hooman Farzaneh
Keyword(s):  
Renewable Energy ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Economic Assessment ◽  
Energy System ◽  
Modeling Framework ◽  
Integrated Simulation ◽  
Hybrid Renewable Energy System ◽  
Renewable Energy System ◽  
Hybrid Renewable Energy

After the Great East Japan Earthquake, energy security and vulnerability have become critical issues facing the Japanese energy system. The integration of renewable energy sources to meet specific regional energy demand is a promising scenario to overcome these challenges. To this aim, this paper proposes a novel hydrogen-based hybrid renewable energy system (HRES), in which hydrogen fuel can be produced using both the methods of solar electrolysis and supercritical water gasification (SCWG) of biomass feedstock. The produced hydrogen is considered to function as an energy storage medium by storing renewable energy until the fuel cell converts it to electricity. The proposed HRES is used to meet the electricity demand load requirements for a typical household in a selected residential area located in Shinchi-machi in Fukuoka prefecture, Japan. The techno-economic assessment of deploying the proposed systems was conducted, using an integrated simulation-optimization modeling framework, considering two scenarios: (1) minimization of the total cost of the system in an off-grid mode and (2) maximization of the total profit obtained from using renewable electricity and selling surplus solar electricity to the grid, considering the feed-in-tariff (FiT) scheme in a grid-tied mode. As indicated by the model results, the proposed HRES can generate about 47.3 MWh of electricity in all scenarios, which is needed to meet the external load requirement in the selected study area. The levelized cost of energy (LCOE) of the system in scenarios 1 and 2 was estimated at 55.92 JPY/kWh and 56.47 JPY/kWh, respectively.

scholarly journals A Sizing Method for PV–Battery–Generator Systems for Off-Grid Applications Based on the LCOE

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1988
Author(s):  
Ioannis E. Kosmadakis ◽  
Costas Elmasides
Keyword(s):  
Renewable Energy ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Temporal Distribution ◽  
Electrical Energy ◽  
Optimal Number ◽  
Diesel Generator ◽  
Levelized Cost Of Electricity ◽  
Sufficient Power ◽  
Battery Energy

Electricity supply in nonelectrified areas can be covered by distributed renewable energy systems. The main disadvantage of these systems is the intermittent and often unpredictable nature of renewable energy sources. Moreover, the temporal distribution of renewable energy may not match that of energy demand. Systems that combine photovoltaic modules with electrical energy storage (EES) can eliminate the above disadvantages. However, the adoption of such solutions is often financially prohibitive. Therefore, all parameters that lead to a functionally reliable and self-sufficient power generation system should be carefully considered during the design phase of such systems. This study proposes a sizing method for off-grid electrification systems consisting of photovoltaics (PV), batteries, and a diesel generator set. The method is based on the optimal number of PV panels and battery energy capacity whilst minimizing the levelized cost of electricity (LCOE) for a period of 25 years. Validations against a synthesized load profile produced grid-independent systems backed by different accumulator technologies, with LCOEs ranging from 0.34 EUR/kWh to 0.46 EUR/kWh. The applied algorithm emphasizes a parameter of useful energy as a key output parameter for which the solar harvest is maximized in parallel with the minimization of the LCOE.

scholarly journals IoT Platform for Energy Sustainability in University Campuses

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 357
Author(s):  
Pedro Moura ◽  
José Ignacio Moreno ◽  
Gregorio López López ◽  
Manuel Alvarez-Campana
Keyword(s):  
Energy Demand ◽  
New Technologies ◽  
Low Cost ◽  
Sustainable Use ◽  
High Energy ◽  
Appropriate Technology ◽  
Monitoring And Control ◽  
Energy Sustainability ◽  
University Campuses ◽  
Iot Platform

University campuses are normally constituted of large buildings responsible for high energy demand, and are also important as demonstration sites for new technologies and systems. This paper presents the results of achieving energy sustainability in a testbed composed of a set of four buildings that constitute the Telecommunications Engineering School of the Universidad Politécnica de Madrid. In the paper, after characterizing the consumption of university buildings for a complete year, different options to achieve more sustainable use of energy are presented, considering the integration of renewable generation sources, namely photovoltaic generation, and monitoring and controlling electricity demand. To ensure the implementation of the desired monitoring and control, an internet of things (IoT) platform based on wireless sensor network (WSN) infrastructure was designed and installed. Such a platform supports a smart system to control the heating, ventilation, and air conditioning (HVAC) and lighting systems in buildings. Furthermore, the paper presents the developed IoT-based platform, as well as the implemented services. As a result, the paper illustrates how providing old existing buildings with the appropriate technology can contribute to the objective of transforming such buildings into nearly zero-energy buildings (nZEB) at a low cost.

scholarly journals Optimal Planning and Operation of a Residential Energy Community under Shared Electricity Incentives

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2045
Author(s):  
Pierpaolo Garavaso ◽  
Fabio Bignucolo ◽  
Jacopo Vivian ◽  
Giulia Alessio ◽  
Michele De Carli
Keyword(s):  
Renewable Energy ◽  
Power Distribution ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Energy System ◽  
Distribution Networks ◽  
Building Envelope ◽  
Net Energy ◽  
Technical Equipment ◽  
Optimal Planning

Energy communities (ECs) are becoming increasingly common entities in power distribution networks. To promote local consumption of renewable energy sources, governments are supporting members of ECs with strong incentives on shared electricity. This policy encourages investments in the residential sector for building retrofit interventions and technical equipment renovations. In this paper, a general EC is modeled as an energy hub, which is deemed as a multi-energy system where different energy carriers are converted or stored to meet the building energy needs. Following the standardized matrix modeling approach, this paper introduces a novel methodology that aims at jointly identifying both optimal investments (planning) and optimal management strategies (operation) to supply the EC’s energy demand in the most convenient way under the current economic framework and policies. Optimal planning and operating results of five refurbishment cases for a real multi-family building are found and discussed, both in terms of overall cost and environmental impact. Simulation results verify that investing in building thermal efficiency leads to progressive electrification of end uses. It is demonstrated that the combination of improvements on building envelope thermal performances, photovoltaic (PV) generation, and heat pump results to be the most convenient refurbishment investment, allowing a 28% overall cost reduction compared to the benchmark scenario. Furthermore, incentives on shared electricity prove to stimulate higher renewable energy source (RES) penetration, reaching a significant reduction of emissions due to decreased net energy import.

scholarly journals Lighting System Modernization as a Source of Green Energy

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2771
Author(s):  
Leszek Kotulski ◽  
Artur Basiura ◽  
Igor Wojnicki ◽  
Sebastian Siuchta
Keyword(s):  
Renewable Energy ◽  
Urban Areas ◽  
Large Scale ◽  
Energy Savings ◽  
Renewable Energy Sources ◽  
Green Energy ◽  
Light Sources ◽  
Levelized Cost Of Electricity ◽  
Cost Of Electricity ◽  
Lighting Retrofit

The use of formal methods and artificial intelligence has made it possible to automatically design outdoor lighting. Quick design for large cities, in a matter of hours instead of weeks, and analysis of various optimization criteria enables to save energy and tune profit stream from lighting retrofit. Since outdoor lighting is of a large scale, having luminaires on every street in urban areas, and since it needs to be retrofitted every 10 to 15 years, choosing proper parameters and light sources leads to significant energy savings. This paper presents the concept and calculations of Levelized Cost of Electricity for outdoor lighting retrofit. It is understood as cost of energy savings, it is in the range from 23.06 to 54.64 EUR/MWh, based on real-world cases. This makes street and road lighting modernization process the best green “energy source” if compared with the 2018 Fraunhofer Institute cost of electricity renewable energy technologies ranking. This indicates that investment in lighting retrofit is more economically and ecologically viable than investment in new renewable energy sources.

Modelling of an Optimized Microgrid Model by Integrating DG Distributed Generation Sources to IEEE 13 Bus System

2021 ◽  
Vol 5 (2) ◽  
pp. 18-25
Author(s):  
Bisma Imtiaz ◽  
Imran Zafar ◽  
Cui Yuanhui
Keyword(s):  
Renewable Energy ◽  
Distributed Generation ◽  
Energy Demand ◽  
High Reliability ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Efficient Manner ◽  
Matlab Simulink ◽  
Control Scheme ◽  
Power Quality Improvement

Due to the rapid increase in energy demand with depleting conventional sources, the world’s interest is moving towards renewable energy sources. Microgrid provides easy and reliable integration of distributed generation (DG) units based on renewable energy sources to the grid. The DG’s are usually integrated to microgrid through inverters. For a reliable operation of microgrid, it must have to operate in grid connected as well as isolated mode. Due to sudden mode change, performance of the DG inverter system will be compromised. Design and simulation of an optimized microgrid model in MATLAB/Simulink is presented in this work. The goal of the designed model is to integrate the inverter-interfaced DG’s to the microgrid in an efficient manner. The IEEE 13 bus test feeder has been converted to a microgrid by integration of DG’s including diesel engine generator, photovoltaic (PV) block and battery. The main feature of the designed MG model is its optimization in both operated modes to ensure the high reliability. For reliable interconnection of designed MG model to the power grid, a control scheme for DG inverter system based on PI controllers and DQ-PLL (phase-locked loop) has been designed. This designed scheme provides constant voltage in isolated mode and constant currents in grid connected mode. For power quality improvement, the regulation of harmonic current insertion has been performed using LCL filter. The performance of the designed MG model has been evaluated from the simulation results in MATLAB/ Simulink.

scholarly journals Strategic Aspects of Economic and Energy Policy of Ukraine in the Context of Sustainable Development

2021 ◽  
Vol 1 (516) ◽  
pp. 65-76
Author(s):  
O. V. Klymchuk ◽  
◽  
S. V. Kozlovskyi ◽  
R. V. Lavrov ◽  
◽  
...  
Keyword(s):  
Sustainable Development ◽  
Renewable Energy ◽  
Energy Saving ◽  
Energy Policy ◽  
Renewable Energy Sources ◽  
The State ◽  
Energy Industry ◽  
Energy Sources ◽  
High Tech ◽  
The World

The article is aimed at developing strategic directions and introducing regulatory measures for the formation of Ukraine’s energy policy on the principles of energy saving and the development of renewable energy industry. On the basis of scientific works, the main organizational-economic vectors of energy industry sector development are systematized, which are associated with the formation of a favorable socio-political climate regarding the priority of using renewable energy sources in the fuel and energy complex; development of effective methods of both the State-based and the market-based regulation by the world community; coordination of the strategy of sustainable development of the world economy. It is determined that the energy saving policy should be based on a flexible combination of the State-based regulation and the market environment for the formation of the most acceptable stimulation mechanisms in the specific economic and political situations, which allows for the greatest economic benefit. It has been found out that the implementation of energy saving processes is impossible without the mass use of renewable energy carriers, which are a universal resource for processing to the right types of energy, are marked by energy independence related to obtaining economic benefits and contribute to the creation of an ecological friendly environment. In the perspective, the energy saving processes, the transition of the national economy to wide implementation in the production of high-tech technologies and the use of renewable energy sources should become the determining factors of Ukraine’s energy strategy.

Sign in / Sign up

Export Citation Format

Share Document