Performance of Tailing Contaminated Soils Solidified by Phosphate-Based Binder

2016 ◽  
Vol 858 ◽  
pp. 104-110 ◽  
Author(s):  
Hao Liang Wu ◽  
Yan Jun Du ◽  
Yu You Yang ◽  
M.L. Wei
Keyword(s):  
Heavy Metals ◽  
Contaminated Soils ◽  
Extraction Procedure ◽  
Mining Area ◽  
Strength Properties ◽  
Curing Time ◽  
X Ray Diffraction ◽  
Electron Microscopic ◽  
Unconfined Compression Test ◽  
Binder Type

This paper presents a study on soils, from the Baoshan mining site, contaminated with heavy metals and stabilized by using a new phosphate-based binder. Unconfined compression test, sequential extraction procedure, X-ray diffraction and scanning electron microscopic procedures are carried out. This study aims to explore the effects of binder type, binder content and curing time of solidified contaminated soils on leaching and strength properties of the soils contaminated with heavy metals in the mining area. The results showed that as the curing time is increased from 0 d to 28 d, the new phosphate-based binder stabilized contaminated soil underwent several changes: 1) improved the strength and 2) decreased the exchangeable Zn and Pb and increased the residual contents.

scholarly journals Fractionation of Heavy Metals in Multi-Contaminated Soil Treated with Biochar Using the Sequential Extraction Procedure

Biomolecules ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 448
Author(s):  
Mahrous Awad ◽  
Zhongzhen Liu ◽  
Milan Skalicky ◽  
Eldessoky S. Dessoky ◽  
Marian Brestic ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Organic Matter ◽  
Soil Organic Matter ◽  
Soil Ph ◽  
Contaminated Soil ◽  
Contaminated Soils ◽  
Extraction Procedure ◽  
Sequential Fractionation ◽  
Relationship Of ◽  
The Relationship

Heavy metals (HMs) toxicity represents a global problem depending on the soil environment’s geochemical forms. Biochar addition safely reduces HMs mobile forms, thus, reducing their toxicity to plants. While several studies have shown that biochar could significantly stabilize HMs in contaminated soils, the study of the relationship of soil properties to potential mechanisms still needs further clarification; hence the importance of assessing a naturally contaminated soil amended, in this case with Paulownia biochar (PB) and Bamboo biochar (BB) to fractionate Pb, Cd, Zn, and Cu using short sequential fractionation plans. The relationship of soil pH and organic matter and its effect on the redistribution of these metals were estimated. The results indicated that the acid-soluble metals decreased while the fraction bound to organic matter increased compared to untreated pots. The increase in the organic matter metal-bound was mostly at the expense of the decrease in the acid extractable and Fe/Mn bound ones. The highest application of PB increased the organically bound fraction of Pb, Cd, Zn, and Cu (62, 61, 34, and 61%, respectively), while the BB increased them (61, 49, 42, and 22%, respectively) over the control. Meanwhile, Fe/Mn oxides bound represents the large portion associated with zinc and copper. Concerning soil organic matter (SOM) and soil pH, as potential tools to reduce the risk of the target metals, a significant positive correlation was observed with acid-soluble extractable metal, while a negative correlation was obtained with organic matter-bound metal. The principal component analysis (PCA) shows that the total variance represents 89.7% for the TCPL-extractable and HMs forms and their relation to pH and SOM, which confirms the positive effect of the pH and SOM under PB and BB treatments on reducing the risk of the studied metals. The mobility and bioavailability of these metals and their geochemical forms widely varied according to pH, soil organic matter, biochar types, and application rates. As an environmentally friendly and economical material, biochar emphasizes its importance as a tool that makes the soil more suitable for safe cultivation in the short term and its long-term sustainability. This study proves that it reduces the mobility of HMs, their environmental risks and contributes to food safety. It also confirms that performing more controlled experiments, such as a pot, is a disciplined and effective way to assess the suitability of different types of biochar as soil modifications to restore HMs contaminated soil via controlling the mobilization of these minerals.

scholarly journals Heavy metal composition of maize and tomato grown on contaminated soils

2018 ◽  
Vol 3 (1) ◽  
pp. 414-426
Author(s):  
A.O. Adekiya ◽  
A.P. Oloruntoba ◽  
S.O. Ojeniyi ◽  
B.S. Ewulo
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Contaminated Soils ◽  
Heavy Metal Contamination ◽  
Mining Area ◽  
Atomic Absorption Spectrophotometry ◽  
Toxic Heavy Metals ◽  
Mining Site ◽  
Solanum Lycopersicum L ◽  
Sources Of Pollution

Abstract The study investigated the level of heavy metal contamination in plants {maize (Zea mays) and tomato (Solanum lycopersicum L.)} from thirty soil samples of three locations (Epe, Igun and Ijana) in the Ilesha gold mining area, Osun State, Nigeria. Total concentrations of As, Cd, Co, Cr, Cu, Ni, Pb and Zn were determined using atomic absorption spectrophotometry. Spatial variations were observed for all metals across the locations which was adduced to pH and the clay contents of the soils of each location. The results showed that heavy metals are more concentrated in the areas that are closer to the mining site and the concentrations in soil and plants (maize and tomato) decreased with increasing perpendicular distance from the mining site, indicating that the gold mine was the main sources of pollution. The mean concentrations of heavy metals in plants (tomato and maize) samples were considered to be contaminated as As, Cd and Pb respectively ranged from 0.6 - 2.04 mg kg-1, 0.8 - 5.2 mg kg-1, 0.8 - 3.04 mg kg-1 for tomato and respectively 0.60 - 2.00 mg kg-1, 1.50 - 4.60 mg kg-1 and 0.90 - 2.50 mg kg-1 for maize. These levels exceeded the maximum permissible limits set by FAO/WHO for vegetables. In conclusion, monitoring of crops for toxic heavy metals is essential for food safety in Nigeria.

scholarly journals Properties and Reaction Mechanisms of Magnesium Phosphate Cement Mixed with Ferroaluminate Cement

Materials ◽  
2019 ◽  
Vol 12 (16) ◽  
pp. 2561 ◽  
Author(s):  
Liang Jia ◽  
Fangli Zhao ◽  
Jian Guo ◽  
Kai Yao
Keyword(s):  
Water Resistance ◽  
Energy Dispersive Spectrometer ◽  
Setting Time ◽  
Cementitious Materials ◽  
Magnesium Phosphate ◽  
Curing Time ◽  
X Ray Diffraction ◽  
Electron Microscopic ◽  
Composite Cement ◽  
Hydrated Product

A certain amount of ferroaluminate cement (FAC) was substituted for MgO during the magnesium phosphate cement (MPC) preparation to obtain the MPC–FAC composite cement. The influence of FAC on the strength, water resistance, pH, and setting time of MPC–FAC composite cement were examined. The microstructure and chemical composition were also analyzed by adopting scanning electron microscopic energy-dispersive spectrometer and X-ray diffraction, respectively. The study showed that setting time of MPC–FAC composite cement was dramatically prolonged when FAC substitution for MgO was between 30 and 40 wt %. The strength of MPC–FAC did not decrease during the early curing time (1 h and 1 d), whereas it increased during the late curing time (3, 7, and 28 days). Moreover, the existence of FAC decreased the hydrated product K-struvite during the early curing time and thus dramatically enhanced the water-resistance of MPC–FAC. With the addition of FAC, a large number of cementitious materials of AFt and AFm, as well as flocculent colloidal substances of AH3, C–S–H, and FH3, were generated during the hydration of MPC, which were filled in the internal pore of the hydrate. Thus, the internal compactness of the sample increased, while the compact protective covering layer was generated on the surface to enhance the water resistance and strength in the late curing time.

scholarly journals Evaluation of Acid Leaching on the Removal of Heavy Metals and Soil Fertility in Contaminated Soil

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Chen-Yao Chu ◽  
Tzu-Hsing Ko
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Seed Germination ◽  
Soil Fertility ◽  
Sequential Extraction ◽  
Contaminated Soil ◽  
Contaminated Soils ◽  
Germination Rate ◽  
Extraction Procedure ◽  
Acid Leaching

Heavy metal-contaminated soils were leached with various acid reagents, and a series of treatments was assessed to understand soil fertility after acid leaching. Aqua regia digestion and a five-step sequential extraction procedure were applied to determine heavy metal distribution. The average total concentrations of Zn, Cd, Cu, and Pb for contaminated soil were 1334, 25, 263, and 525 mg·kg−1 based on the ICP/AES quantitative analysis. Other than Pb extracted by H2SO4, over 50% removal efficiency of other heavy metals was achieved. A five-step sequential extraction revealed that the bound-to-carbonate and bound-to-Fe-Mn oxides were the major forms of the heavy metals in the soil. The addition of organic manure considerably promoted soil fertility and increased soil pH after acid leaching. Seed germination experiments demonstrated that after acid leaching, the soil distinctly inhibited plant growth and the addition of manure enhanced seed germination rate from 35% to 84%. Furthermore, the procedure of soil turnover after acid leaching and manure addition greatly increased seed germination rate by 61% and shortened the initial germination time. Seed germination in untreated soil was superior to that in acid-leached soil, illustrating that the phytotoxic effect of acid leaching is more serious than that of heavy metals.

scholarly journals Removal of heavy metals (Cu, Cd and Zn) from contaminated soils using EDTA and FeCl3

2016 ◽  
Vol 18 (1) ◽  
pp. 98-107 ◽  
Keyword(s):  
Heavy Metals ◽  
Contaminated Soils ◽  
Extraction Procedure ◽  
Soil Washing ◽  
Nitrilotriacetic Acid ◽  
Coarse Grained ◽  
Metal Extraction ◽  
Fine Grained ◽  
Solid Ratio ◽  
Fine Grained Soil

<p>Environmental pollution caused by heavy metals from different industrial activities constitutes a serious risk for the environment. Soils contaminated with metals, such as Cu, Cd and Zn, are often subjected to physical or chemical remediation procedures to purify soils from these metals. Typical chelating agents used for metal extraction and soil washing generally include ethylene-diaminetetraacetic acid nitrilotriacetic acid, diethylenetriaminepentaacetic acid and citric acid. The subject study evaluating the potential of soil washing methods using EDTA and ferric chloride on two types of soils (coarse grained, fine grained). The effects of operating parameters, such as liquid/solid ratio, soil washing chemicals and washing time were examined. In extraction procedure of Cd (266 mg kg<sup>-1</sup>), Cu (194 mg kg<sup>-1</sup>) and Zn (497 mg kg<sup>-1</sup>) from contaminated coarse grained soil with using 0.01 M FeCl<sub>3</sub> washing solution (liquid/solid ratio 20) for 2 hours, contaminants were removed 96.66%, 90.02% and 98.25%, respectively. In extraction procedure of Cd (218 mg kg<sup>-1</sup>), Cu (153 mg kg<sup>-1</sup>) and Zn (441.6 mg kg<sup>-1</sup>) from contaminated fine grained soil with using 0.01 M FeCl<sub>3</sub> washing solution (liquid/solid ratio 20) for 2 hours, contaminants were removed 98.18%, 97.48% and 98.05%, respectively. Better removal efficiencies have been obtained by using FeCl<sub>3</sub>. These results confirmed the effectiveness of the soil-washing method with FeCl<sub>3</sub> in remediating heavy metals (Cu, Cd and Zn) from different types of soil.</p>

scholarly journals REDUCTION OF TOXIC ELEMENT MOBILITY IN MINING SOIL BY ZEOLITIC AMENDMENTS

2017 ◽  
Vol 50 (4) ◽  
pp. 2127 ◽  
Author(s):  
S. Giannatou ◽  
Ch. Vasilatos ◽  
I. Mitsis ◽  
N. Koukouzas ◽  
G. Itskos ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Fly Ash ◽  
Contaminated Soils ◽  
Low Cost ◽  
Trace Element Content ◽  
Mining Area ◽  
Toxic Element ◽  
Synthetic Zeolite ◽  
Element Content ◽  
Lignite Fly Ash

The aim of this study is to examine the effectiveness of natural and synthetic zeolitic materials as potential amendments for the rehabilitation of mine degraded areas. Two types of natural zeolite tuffs, clinoptilolite- and mordenite rich originating from Samos Island, Greece, were used as low cost modifiers. In addition, the synthetic zeolite Na-P1, produced from lignite fly ash of the Meliti Lignite fired Power Station (Florina, Greece), was used. Fly ash was converted into synthetic zeolite via a low temperature alkaline hydrothermal treatment. In order to evaluate the aquatic solubility and potential bioavailability of heavy metals in contaminated soils of the mining area of Lavrion, specific soil amendments were used in leaching experiments. The Na-P1zeolite proved to be the most effective among the tested amendments for in situ de-contamination of mining soils. Comparing the two natural zeolites used, the mordenite-rich tuff exhibited better results than the clinoptilolite-rich, for the reduction of the potential bioavailability of almost all the studied heavy metals. Despite the high trace element content of the specific soils, it was observed that the Glaucium flavum, a plant that grows in the contaminated soils of Lavrion, does not accumulate high concentrations of metals; therefore the high toxic element content of soils does not always influence the physiology of the plants.

Direct visualization of phase-separated domains in lipid membranes

1978 ◽  
Vol 36 (2) ◽  
pp. 290-291
Author(s):  
S. W. Hui ◽  
T. P. Stewart
Keyword(s):  
Lipid Membranes ◽  
Structural Information ◽  
Freeze Fracture ◽  
Biological Molecules ◽  
Vacuum Drying ◽  
Direct Visualization ◽  
X Ray Diffraction ◽  
Electron Microscopic ◽  
X Ray ◽  
Hydrocarbon Chains

Direct electron microscopic study of biological molecules has been hampered by such factors as radiation damage, lack of contrast and vacuum drying. In certain cases, however, the difficulties may be overcome by using redundent structural information from repeating units and by various specimen preservation methods. With bilayers of phospholipids in which both the solid and fluid phases co-exist, the ordering of the hydrocarbon chains may be utilized to form diffraction contrast images. Domains of different molecular packings may be recgnizable by placing properly chosen filters in the diffraction plane. These domains would correspond to those observed by freeze fracture, if certain distinctive undulating patterns are associated with certain molecular packing, as suggested by X-ray diffraction studies. By using an environmental stage, we were able to directly observe these domains in bilayers of mixed phospholipids at various temperatures at which their phases change from misible to inmissible states.

Sign in / Sign up

Export Citation Format

Share Document