scholarly journals Heavy metal composition of maize and tomato grown on contaminated soils

2018 ◽  
Vol 3 (1) ◽  
pp. 414-426
Author(s):  
A.O. Adekiya ◽  
A.P. Oloruntoba ◽  
S.O. Ojeniyi ◽  
B.S. Ewulo
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Contaminated Soils ◽  
Heavy Metal Contamination ◽  
Mining Area ◽  
Atomic Absorption Spectrophotometry ◽  
Toxic Heavy Metals ◽  
Mining Site ◽  
Solanum Lycopersicum L ◽  
Sources Of Pollution

Abstract The study investigated the level of heavy metal contamination in plants {maize (Zea mays) and tomato (Solanum lycopersicum L.)} from thirty soil samples of three locations (Epe, Igun and Ijana) in the Ilesha gold mining area, Osun State, Nigeria. Total concentrations of As, Cd, Co, Cr, Cu, Ni, Pb and Zn were determined using atomic absorption spectrophotometry. Spatial variations were observed for all metals across the locations which was adduced to pH and the clay contents of the soils of each location. The results showed that heavy metals are more concentrated in the areas that are closer to the mining site and the concentrations in soil and plants (maize and tomato) decreased with increasing perpendicular distance from the mining site, indicating that the gold mine was the main sources of pollution. The mean concentrations of heavy metals in plants (tomato and maize) samples were considered to be contaminated as As, Cd and Pb respectively ranged from 0.6 - 2.04 mg kg-1, 0.8 - 5.2 mg kg-1, 0.8 - 3.04 mg kg-1 for tomato and respectively 0.60 - 2.00 mg kg-1, 1.50 - 4.60 mg kg-1 and 0.90 - 2.50 mg kg-1 for maize. These levels exceeded the maximum permissible limits set by FAO/WHO for vegetables. In conclusion, monitoring of crops for toxic heavy metals is essential for food safety in Nigeria.

scholarly journals Heavy Metals Concentration in Contaminated Soils from Southern Part of Romania

2011 ◽  
Vol 68 (2) ◽  
Author(s):  
Diana FLORESCU ◽  
Andreea IORDACHE ◽  
Claudia SANDRU ◽  
Elena HORJ ◽  
Roxana IONETE ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Contaminated Soils ◽  
Metal Contamination ◽  
Industrial Waste ◽  
Heavy Metal Contamination ◽  
Land Application ◽  
Industrial Wastes ◽  
Treatment Processes ◽  
Contamination Of Soils

As a result of accidental spills or leaks, industrial wastes may enter in soil and in streams. Some of the contaminants may not be completely removed by treatment processes; therefore, they could become a problem for these sources. The use of synthetic products (e.g. pesticides, paints, batteries, industrial waste, and land application of industrial or domestic sludge) can result in heavy metal contamination of soils.

scholarly journals Determination of heavy metals and selenium content in chicken liver at Erbil city, Iraq

2020 ◽  
Vol 9 (3) ◽  
Author(s):  
Hoshyar Saadi Ali ◽  
Dhary Alewy Almashhadany ◽  
Hawraz Sami Khalid
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Inductively Coupled Plasma ◽  
Heavy Metal Contamination ◽  
Optical Emission ◽  
Critical Issue ◽  
Chicken Liver ◽  
Poultry Meat ◽  
Emission Spectrometry ◽  
Toxic Heavy Metals

Heavy metal contamination of poultry meat is a critical issue for human health due to associated risks of cytotoxicity and systemic pathologies after ingestion of such metals. A total of twenty chicken liver samples were collected from markets of Erbil city and analyzed for ten heavy metals contents by Inductively Coupled Plasma Optical Emission Spectrometry. The targeted metals were cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), manganese (Mn), nickel (Ni), lead (Pb), mercury (Hg), zinc (Zn) and selenium (Se). The average concentrations (mg/kg) of targeted trace elements were 0.06±0.027, 0.06±0.05, 2.05±0.34, 1.85±0.47, 0.15±0.17, and 33.53±5.24 for Co, Cr, Cu, Mn, Ni, and Zn respectively. Copper (Cu) levels significantly exceeded the maximum permissible limit of WHO. Moreover, the average concentrations of toxic heavy metals and selenium were 0.07±0.037, 0.278±0.10, 0.11±0.083, and 2.01±0.454 mg/kg for Cd, Pb, Hg, and Se respectively. Hg and Pb levels exceeded the permissible limits of WHO. Higher levels of Cu and Hg in poultry may pose a serious threat to consumers which demand countermeasures and precautions to be taken. Iraqi Standards Authority and relevant official institutions are strongly recommended to regulate safe disposal of heavy metal waste in the environment to reduce animal exposure to such metals.

Batch and column tests for the development of an immobilization technology for toxic heavy metals in contaminated soils of closed mines

1998 ◽  
Vol 37 (8) ◽  
pp. 81-88 ◽  
Author(s):  
A. Jang ◽  
Y. S. Choi ◽  
In S. Kim
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Contaminated Soils ◽  
Mine Drainage ◽  
Fine Sand ◽  
Design Parameters ◽  
Batch Adsorption ◽  
Toxic Heavy Metals ◽  
Chemical Additives ◽  
Column Tests

Laboratory tests of various chemical treatments for the immobilization of copper, nickel, and lead in soils typically found at mine facilities were evaluated. A series of batch, adsorption tests, and lab-scale continuous column tests were conducted to optimize the design parameters for the full-scale immobilization processes. The laboratory test program consisted of batch and column experiments to measure the leachability and subsequent immobilization of the single heavy metal, Cu2+, Pb2+, and Ni2+ in an artificial soil which was composed of bentonite and quartz fine sand. Batch equilibrium methods were used to test the ability of a large number of chemical additives to react with heavy metals in contaminated soil. The two best treatment chemicals (CaO and Na2S) for each soil-metal combination were selected for more detailed columns studies. The column tests were carried out in the acidic pH range. According to the results of the column leaching test, it was found that the degree of heavy metal leaching is highly dependent on pH. An adsorption test was performed under acidic conditions (pH 4) to evaluate bentonite as an additive to treat acid mine drainage (AMD).

scholarly journals Assessment of heavy metal’s in Atlantic sea fish sold in Benin

2020 ◽  
Vol 14 (5) ◽  
pp. 1853-1861
Author(s):  
Elisabeth Yehouenou Azehoun Pazou ◽  
Judicaël Azehoun Pazou ◽  
Mahoudjro Roméo Adamou
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Human Health ◽  
Fish Species ◽  
Health Impact ◽  
Atomic Absorption Spectrophotometry ◽  
Negative Effects ◽  
Fresh Fish ◽  
Sources Of Pollution ◽  
Metal Levels

Marine space is constantly threatened by various sources of pollution that may reduce its economic potential and have negative repercussions on human health. This study aims to assess heavy metals contamination of eight fish species and their impact on human health. Heavy metals such as cadmium, lead, copper and zinc were determined by atomic absorption spectrophotometry in fresh, cooked and fried fish. The results found in fresh fish (cadmium: 0.002 to 0.005 mg / kg, lead: 0 to 0.031 mg / kg, copper: 0.0045 to 0.305 mg / kg, zinc: 0.1245 to 0.6195 mg / kg), in cooked fish (cadmium: 0.0035 to 0.005 mg / kg, lead: 0 to 0.01 mg / kg, copper: 0 to 0.021 mg / kg, zinc: 0.171 to 0.327 mg / kg) and in fried fish (cadmium: 0.004 mg / kg, lead: 0 to 0.007 mg / kg, copper: 0 to 0.016 mg / kg, zinc: 0.0875 to 0.5065 mg / kg) showed that heavy metal levels are all below the standard values accepted by FAO / WHO. The consumption of these fish could therefore have no negative effect on the population’s health. Both types of cooking have both positive and negative effects on the heavy metal reduction in fish species. Although the concentrations of heavy metals are not worrying, the vigilance of the populations and a variation of the diet are important to guarantee a better health.Keywords: Heavy metals, health impact, Atlantic see fish, Cotonou.

scholarly journals Fungal Community Diversity of a Heavy Metal Contaminated Soils Revealed by Metagenomics

2021 ◽  
Author(s):  
Michel Rodrigo Zambrano Passarini ◽  
Júlia Ronzella Ottoni ◽  
Paulo Emílio Santos Costa ◽  
Denise Cavalvante Hissa ◽  
Raul Maia Falcão ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Contaminated Soils ◽  
Heavy Metal Contamination ◽  
Community Diversity ◽  
Fungal Communities ◽  
Contaminated Sites ◽  
Contaminated Site ◽  
Toxic Compounds ◽  
Metagenomic Approach

Abstract The inappropriate disposal of toxic compounds generated by industrial activity has been impacting to the environment considerably. Microbial communities inhabiting contaminated sites may represent interesting ecological alternatives for the decontamination of environments. The present work aimed to investigate the fungal diversity inhabiting sediments from industrial waste containing heavy metals by using metagenomic approach. A total of twelve fungal orders were retrieved from datasets and, at phylum level, Ascomycota was the most abundant, followed by Basidiomycota, Chytridiomycota and Blastocladiomycota. Higher abundance of sequences was encountered within the less contaminated site, while the lower abundance was found in the sample with the higher contamination with lead. Gene sequences related to DNA repair and heavy metals biosorption processes were found in the four samples analyzed. The genera Aspergillus and Chaetomium, and Saccharomycetales order were highly present within all samples, showing their potential to be used for bioremediation studies. The present work demonstrated the importance of using the metagenomic approach to understand the dynamics of fungal communities and their behavior under heavy metal contamination, aiming the use in bioremediation processes of environments contaminated with heavy metals.

scholarly journals Ecological risk assessment of heavy metal-contaminated soils of selected villages in Zamfara State, Nigeria

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Sharhabil Musa Yahaya ◽  
Fatima Abubakar ◽  
Nafiu Abdu
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Ecological Risk ◽  
Contaminated Soils ◽  
Metal Contamination ◽  
Heavy Metal Contamination ◽  
Pollution Indices ◽  
Mining Activities ◽  
Positive Correlation ◽  
Flame Atomic Absorption

AbstractThe incidence of heavy metal contamination in Zamfara State, northern Nigeria, due to artisanal mining in some villages has resulted in the pollution of a vast area of land and water. This study evaluated the extent of environmental risks caused by heavy metals. It involved five (5) villages (Bagega, Dareta, Sunke, Tunga, and Abare) where mining activities were taking place and Anka town with no record of mining activities served as control. In each of the five villages, three sites (3) were identified as a mining site, processing site, and village making a total of sixteen (16) sites. Bulked soil samples were collected in triplicate and analyzed for iron, lead, cadmium, chromium, zinc, and nickel using flame atomic absorption spectrophotometry. Measured concentrations of the heavy metals in soils were then used to calculate the pollution and ecological risk pose by heavy metals. Their concentrations were in the order Fe > Pb > Cr > Zn > Cd > Ni, with Pb and Cd having a concentration higher than permissible levels for soils and accounted for 98.64% of the total potential ecological risk. Also, all the different pollution indices examined showed that all the sites were polluted with Cd, and all the processing sites were polluted with Pb. This reveals that processing sites pose more risk to heavy metal contamination. Correlation analysis showed a highly significant (p < 0.001) positive correlation between Pb and Zn, Cr and Ni, and a significant (p < 0.01) positive correlation between Fe and Pb, Zn and Cr. The principal component analysis suggested that Pb, Zn, Cr, and Ni likely originated from the same source, i.e., mining activities, and Fe and Cd originated from the abundant parent material in the study area.

scholarly journals HEAVY METAL (Cu, Zn, Fe, Mn, Pb, Cd) CONCENTRATION IN SOILS OF TYUMEN

2020 ◽  
pp. 127-134
Author(s):  
A. S. Petukhov ◽  
T. A. Kremleva ◽  
N. A. Khritokhin ◽  
G. A. Petukhova ◽  
P. I. Kaidunova
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metallurgical Plant ◽  
Urban Areas ◽  
Limit Of Detection ◽  
Control Sample ◽  
Atomic Absorption Spectrophotometry ◽  
Soil Samples ◽  
Oil Refining ◽  
Toxic Heavy Metals

Toxic heavy metals contaminating soil get accumulated by plants, cause degradation of plant communities, and eventually penetrate human bodies with food. Therefore, it is urgent to investigate the content of heavy metal in soils in urban areas. The aim of this study was to investigate the concentration of Cu, Fe, Mn, Pb and Cd in soils of Tyumen. Top soil was sampled at the semi-clean control site near a highway, and at sites near metallurgical, motor-building, oil-refining and battery-manufacturing facilities in Tyumen, Russia. The concentration of active and acid-soluble forms of heavy metals was determined by atomic-absorption spectrophotometry. All the soil samples from urban areas were polluted with Fe. The samples collected near the battery manufactory and the metallurgical plant were contaminated with Pb and Zn, respectively, with maximum allowable concentration exceeded. The Cu, Mn and Zn content in most soil samples was higher than that in the control sample. The Cd content in all samples was at the lower limit of detection. The average percentages of active forms of Mn and Zn in soils were the highest among all the studied metals. The most intense accumulation of all heavy metals was observed near the battery manufactory and the metallurgical plant. The obtained results can be useful for environmental monitoring in Tyumen.

Assessment of Heavy Metal Contamination in Paddy Soils from Daye Mining Area of Hubei Province, China

2012 ◽  
Vol 599 ◽  
pp. 434-440 ◽  
Author(s):  
Chun Qin Yin ◽  
Qing Bin Sun ◽  
Xue Qiang Zhao
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Heavy Metal Contamination ◽  
Mine Drainage ◽  
Graphite Furnace ◽  
Principal Component ◽  
Mining Area ◽  
Paddy Soils ◽  
Metal Mine ◽  
Heavy Metals Contamination

The occurrence and distribution of heavy metals (including copper (Cu), lead (Pb), zinc (Zn), cadmium (Cd), chromium (Cr), cobalt (Co), nickel (Ni) and manganese (Mn)) in paddy soils from the Daye mining area were investigated by atomic absorption spectrophotometry (AAS) using the flame and graphite furnace method. The pollution of all metals investigated was found in paddy soil samples from the Daye mining area. Additionally, Cu, Pb, Zn and Cd concentrations at the sampling sites near the quarries and mines located in the central and eastern part of Daye were higher than those at the other sampling sites. Hierarchical cluster analysis and principal component analysis (PCA) of the heavy metal concentrations showed that the mine might be an important contributor to heavy metals contamination. PCA analysis extracted two factors that explained 67% of the total variables. The source of Zn, Cd, Cu and Pb would be primarily the deposition of aerosol particles emitted by metal smelting, manufacturing and traffic, acid mine drainage and metal mine waste rock and long-term stockpiling of tailings. Ni and Cr were controlled by parent material in the soils. Evaluation of heavy metals contamination of paddy soils indicated that the Cd contamination was the most widespread, followed Cu, Ni, Zn and Pb.

scholarly journals Advances in Heavy Metal Bioremediation: An Overview

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Ali Sayqal ◽  
Omar B. Ahmed
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Heavy Metal Contamination ◽  
Ex Situ ◽  
Toxic Heavy Metals ◽  
Heavy Metal Remediation ◽  
Land Farming ◽  
Biological Methods ◽  
Metal Bioremediation

The pollution of toxic heavy metals is considered one of the most important environmental issues which has accelerated dramatically due to changing industrial activities. This review focuses on the most common methods, strategies, and biological approaches of heavy metal bioremediation. Also, it provides a general overview of the role of microorganisms in the bioremediation of heavy metals in polluted environments. Advanced methods of heavy metal remediation include physicochemical and biological methods; the latter can be further classified into in situ and ex situ bioremediation. The in situ process includes bioventing, biosparging, biostimulation, bioaugmentation, and phytoremediation. Ex situ bioremediation includes land farming, composting, biopiles, and bioreactors. Bioremediation uses naturally occurring microorganisms such as Pseudomonas, Sphingomonas, Rhodococcus, Alcaligenes, and Mycobacterium. Generally, bioremediation is of very less effort, less labor intensive, cheap, ecofriendly, sustainable, and relatively easy to implement. Most of the disadvantages of bioremediation relate to the slowness and time-consumption; furthermore, the products of biodegradation sometimes become more toxic than the original compound. The performance evaluation of bioremediation might be difficult as it has no acceptable endpoint. There is a need for further studies to develop bioremediation technologies in order to find more biological solutions for bioremediation of heavy metal contamination from different environmental systems.

scholarly journals Accumulation of essential (copper, iron, zinc) and non-essential (lead, cadmium) heavy metals in Caulerpa racemosa, sea water, and marine sediments of Bintan Island, Indonesia

F1000Research ◽  
2021 ◽  
Vol 10 ◽  
pp. 699
Author(s):  
Tengku Said Raza’i ◽  
Thamrin Thamrin ◽  
Nofrizal Nofrizal ◽  
Viktor Amrifo ◽  
Hilfi Pardi ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Contamination ◽  
Heavy Metal Contamination ◽  
Sea Water ◽  
Anthropogenic Activities ◽  
Heavy Metal Concentration ◽  
Atomic Absorption Spectrophotometry ◽  
Caulerpa Racemosa ◽  
Mining Areas

Background: Heavy metals are materials naturally occurring in nature and increase with a rise in human activity. Ex-mining areas and domestic waste from human settlements are sources of heavy metal contamination that enter and pollute water, which then accumulates in various organisms including the Caulerpa racemosa community. The accumulation of heavy metals in C. racemosa has a wide impact on the food chain in aquatic ecosystems and humans because this alga is a consumptive commodity.   Methods: Sampling of C. racemosa was carried out at seven sites on Bintan Island, Indonesia covering the eastern (Teluk Bakau, Beralas Pasir, Malang Rapat), northern (Berakit and Pengudang), western (Sakera), and southern parts (Tg. Siambang). Sampling was carried out during different monsoons, and heavy metals in water and sediment samples were measured to determine the heavy metal concentration. Heavy metals were analyzed by a spectrophotometric method using Atomic Absorption Spectrophotometry.   Results: The results showed that heavy metal concentrations fluctuate according to changes in the wind season, which carry currents and spread pollutants into the water. The concentration of metal in the water is also from anthropogenic activities. The heavy metal content of cadmium (Cd), lead (Pb), copper (Cu), iron (Fe), and zinc (Zn) in C. racemosa is high in locations close to settlements. Meanwhile, in seawater samples, Fe and Zn metals have the highest concentrations compared to others.  Conclusions: Ex-bauxite mines are a source of Fe and Zn metal contamination in the environment, especially at Tg. Siambang. The levels of these heavy metals in the sediment are also high, as surface particle deposits accumulate at the bottom of the sediment. In general, the levels of heavy metals Cd, Pb, Cu, Fe, and Zn increase in the northern monsoon because the dynamics of the water transport greater heavy metal pollution.

Sign in / Sign up

Export Citation Format

Share Document