Sr(II) Removal from Aqueous Solution by Bacillus cereus Biomass, Equilibrium and Kinetic Studies

2011 ◽  
Vol 230-232 ◽  
pp. 1129-1132 ◽  
Author(s):  
Ya Li He ◽  
Tian Hai Wang ◽  
Jun Cao Shi
Keyword(s):  
Aqueous Solution ◽  
Bacillus Cereus ◽  
Practical Implication ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Economic Technology

Batch experiments were carried out to determine the capacity of Bacillus cereus biomass to adsorb Sr(II) ions from aqueous solution with respect to pH, initial Sr(II) concentration, contact time and biomass dose. The experimental data were modeled by Langmuir and Freundlich isotherm models. Langmuir model resulted in the best fit of the adsorption data. The maximum adsorption capacity for Sr(II) was 78.34 mg/g. The best correlation was provided by the second-order kinetic model, implying that chemical sorption was the rate-limiting step. The practical implication of this study is the development of an effective and economic technology for Sr(II) removal from contaminated waters.

Adsorption of Cobalt onto Bacillus cereus: Application of Isotherm and Kinetic Models

2011 ◽  
Vol 230-232 ◽  
pp. 1169-1172
Author(s):  
Yuan Hong Wang ◽  
Hui Li Zhu ◽  
Fang Xia
Keyword(s):  
Bacillus Cereus ◽  
Practical Implication ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Isotherm And Kinetic Models ◽  
Economic Technology ◽  
Best Fit

Batch experiments were carried out to determine the capacity of Bacillus cereus biomass to adsorb Co(II) ions from aqueous solution with respect to pH, initial Co(II) concentration, contact time and biomass dose. The experimental data were modeled by Langmuir and Freundlich isotherm models. Langmuir model resulted in the best fit of the adsorption data. The maximum adsorption capacity for Co(II) was 68.10 mg/g. The best correlation was provided by the second-order kinetic model. The practical implication of this study is the development of an effective and economic technology for Co(II) removal from contaminated waters.

Adsorption of Cobalt Ions onto Mycobacterium phlei from Wastewaters

2011 ◽  
Vol 71-78 ◽  
pp. 2249-2252 ◽  
Author(s):  
Yan Xing
Keyword(s):  
Practical Implication ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Solution Ph ◽  
Cobalt Ions ◽  
Mycobacterium Phlei ◽  
Order Kinetic Model ◽  
Economic Technology

This fundamental work deals with the biosorption removal of Co(II) using a Mycobacterium phlei strain. Several variables that have an effect on the capacity of cobalt biosorption from aqueous solution by Mycobacterium phlei were studied. particularly the effects of solution pH, initial Co(II) concentration, contact time and biomass dose. The experimental data were modeled by Langmuir and Freundlich isotherm models. Langmuir model resulted in the best fit of the adsorption data. The maximum adsorption capacity for Co(II) was 68.22 mg/g. The best correlation was provided by the second-order kinetic model, implying that chemical sorption was the rate-limiting step. The practical implication of this study is the development of an effective and economic technology for Co(II) removal from wastewaters.

scholarly journals Phenol adsorption from wastewater using cashew nut shells as adsorbent

2018 ◽  
Vol 7 (3) ◽  
pp. 966
Author(s):  
Kartik Kulkarni ◽  
Varsha Sudheer ◽  
C R Girish
Keyword(s):  
Agricultural Waste ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Multilayer Adsorption ◽  
Phenol Adsorption ◽  
Cashew Nut ◽  
Experimental Parameters ◽  
Order Kinetic Model

The potential of agricultural waste cashew nut shells as an adsorbent for removing phenol from wastewater is presented in this paper. The adsorbent was treated with 3M sulphuric acid in order to improve the properties. The experimental parameters such as adsorbent dosage, concentration and temperature were optimized with response surface methodology (RSM). The isotherm data were tested with different isotherm models and it obeyed Freundlich Isotherm showing the multilayer adsorption. The kinetic data satisfied pseudo-first order kinetic model. The maximum adsorption capacity was calculated to be 35.08 mg/g proving the capability of cashew nut shells for removing phenol from wastewater.  

scholarly journals SURFACE MODIFICATION OF CANARIUM OVATUMENGL.(PILI) SHELL AS ADSORBENT OF LEAD(Pb2+) FROM AQUEOUS SOLUTION

2021 ◽  
Author(s):  
Ernesto Jr. S. Cajucom ◽  
◽  
Lolibeth V. Figueroa ◽  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Cost Effective ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Carboxylic Groups ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Surface Modified

This study was carried out to investigate the efficiency of raw pili shell (RPS) and the surface modified pili shell using EDTA (EMPS) and oxalic acid (OMPS). A comparative study on the adsorption capacity of the adsorbents was performed against lead (Pb2+) from aqueous solution. The adsorbents were characterized by FTIR, which showed higher peak of adsorption bands of carboxylic groups on the acid modified pili shells. Scanning electron microscope orSEM was also used to describe the surface morphology of the adsorbents. The linear form of Langmuir and Freundlich models were applied to represent adsorption data. The calculated equilibrium data of Pb (II) best fitted to Langmuir compare to Freundlich isotherm model with maximum adsorption capacity (qmax) of 27.03 mg/g and 45.45 mg/g using EMPS and OMPS, respectively. Kinetic sorption models were used to determine the adsorption mechanism and the kinetic data of all the adsorbents correlated (R2=1) wellwith the pseudo second order kinetic model. Among the three adsorbents, OMPS shown higher percent removal of lead compared to RPS and EMPS. The large adsorption capacity rate indicated that chemically modified pili shell in present study has great potential to be used as a cost-effective adsorbent for the removal of lead ions from the water.

Parametric and adsorption kinetic studies of methylene blue removal from simulated textile water using durian (Durio zibethinus murray) skin

2015 ◽  
Vol 72 (6) ◽  
pp. 896-907 ◽  
Author(s):  
S. M. Anisuzzaman ◽  
Collin G. Joseph ◽  
D. Krishnaiah ◽  
A. Bono ◽  
L. C. Ooi
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Dye Adsorption ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Durio Zibethinus

In this study, durian (Durio zibethinus Murray) skin was examined for its ability to remove methylene blue (MB) dye from simulated textile wastewater. Adsorption equilibrium and kinetics of MB removal from aqueous solutions at different parametric conditions such as different initial concentrations (2–10 mg/L), biosorbent dosages (0.3–0.7 g) and pH solution (4–9) onto durian skin were studied using batch adsorption. The amount of MB adsorbed increased from 3.45 to 17.31 mg/g with the increase in initial concentration of MB dye; whereas biosorbent dosage increased from 1.08 to 2.47 mg/g. Maximum dye adsorption capacity of the durian skin was found to increase from 3.78 to 6.40 mg/g, with increasing solution pH. Equilibrium isotherm data were analyzed according to Langmuir and Freundlich isotherm models. The sorption equilibrium was best described by the Freundlich isotherm model with maximum adsorption capacity of 7.23 mg/g and this was due to the heterogeneous nature of the durian skin surface. Kinetic studies indicated that the sorption of MB dye tended to follow the pseudo second-order kinetic model with promising correlation of 0.9836 < R2 < 0.9918.

Preparation of titanate nanoflower for sorption of 75Se(IV) radioisotope from aqueous solution: Equilibrium, kinetic and thermodynamic studies

2015 ◽  
Vol 103 (12) ◽  
Author(s):  
Sahar El-Sayed Abd El-Kader Sharaf El-Deen ◽  
Karam Fatwhi Allan ◽  
Mohamed Holeil ◽  
Gehan El-Sayed Abd El-Kader Sharaf El-Deen
Keyword(s):  
Aqueous Solution ◽  
Electrostatic Interactions ◽  
Outer Sphere ◽  
Solution Temperature ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
X Ray ◽  
Adsorptive Removal ◽  
Order Kinetic Model

AbstractIn this study, the adsorptive removal of selenium (IV) from aqueous solution by titanate nanoflower (TNF) was prepared via alkaline hydrothermal method. The morphology and crystal phase of the TNF were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscope (EDX), selected area electron diffraction (SAED), thermogravimetric analysis (TGA), fourier transform infrared spectroscopy (FTIR) and specific surface area. This study was conducted to determine the influence of various operating parameters such as pH, adsorbate weight, initial anion concentration, contact time and solution temperature on the adsorptive removal of selenium (IV). Equilibrium adsorption data were analyzed using Freundlich, Langmuir and Dubinin–Radushkevich (D–R) isotherm models. The results demonstrated that the adsorption was well described by the Langmuir adsorption isotherm with the maximum adsorption capacity up to 46.52 mg/g at pH 3.5. The adsorption of Se(IV) anions onto the surface of TNF may proceed through outer sphere electrostatic interactions and/or inner-sphere complexation interaction. The kinetic data indicated that the adsorption fit well with the pseudo-second-order kinetic model. The thermodynamic parameters implied that the adsorption process was spontaneous and endothermic in nature.

scholarly journals The effect of alkaline pretreatment on surfactant-modified clinoptilolite for diclofenac adsorption: isotherm, kinetic, and thermodynamic studies

2020 ◽  
Author(s):  
Fateme Poorsharbaf Ghavi ◽  
Fereshteh Raouf ◽  
Ahmad Dadvand Koohi
Keyword(s):  
Ph Effect ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Thermodynamic Studies ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Modified Clinoptilolite ◽  
Kinetic And Thermodynamic Studies

Abstract The elimination of diclofenac traces from aqueous environments is important. In this research, the effect of alkaline (NaOH) pretreatment on clinoptilolite before its modification with a surfactant (HDTMA) for diclofenac adsorption under the speculation of the sole presence of diclofenac in the aqueous solution is investigated. The results are compared through isotherm, kinetic, and thermodynamic studies and supplemented by FTIR, SEM, BET, and the zeta potential analyses. The contact time was investigated in a 0–180-min range. The pH effect was studied in a range of 5–10 because of diclofenac dissociation below pH = 5. The effect of the temperature on diclofenac adsorption was also considered by establishing the experiments at 25, 35, and 45 °C. For HDTMA-modified clinoptilolite, Temkin, and for NaOH-HDTMA-modified clinoptilolite, Dubinin–Radushkevich, and Freundlich isotherm models and in both cases, the pseudo-second-order kinetic model fitted the experimental data best. All the enthalpy and the entropy changes were negative, suggesting exothermic adsorption with a decrease in the degree of freedom of diclofenac anions after the adsorption. Furthermore, diclofenac physisorption was confirmed through isotherm and kinetic studies.

scholarly journals Removal of Acidic Dye from Aqueous Solution Using Surfactant Modified Bentonite (Organoclay): Batch and Kinetic Study

2020 ◽  
Vol 26 (5) ◽  
pp. 64-81
Author(s):  
Saraa M. Ibrahim ◽  
Ziad T. Abd Ali
Keyword(s):  
Aqueous Solution ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Ammonium Bromide ◽  
Order Kinetic ◽  
Sorption Data ◽  
Modified Bentonite ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Cetyltrimethyl Ammonium

Modified bentonite has been used as effective sorbent material for the removal of acidic dye (methyl orange) from aqueous solution in batch system. The natural bentonite has been modified using cationic surfactant (cetyltrimethyl ammonium bromide) in order to obtain an efficient sorbent through converting the properties of bentonite from hydrophilic to organophilic. The characteristics of the natural and modified bentonite were examined through several analyses such as Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and Surface area. The batch study was provided the maximum dye removal efficiency of 88.75 % with a sorption capacity of 555.56 mg/g at specified conditions (150 min, pH= 2, 250 rpm, and 0.5 g/100 ml). The-results-showed that with the Freundlich isotherm model the sorption data was accurately described with (R2≥0.94) in comparison with the Langmuir model under the studied conditions. The kinetic studies were revealed that the sorption follows a pseudo-second-order kinetic model which indicates chemisorption between sorbent and sorbate molecules. 

scholarly journals Equilibrium and kinetic studies of sorption of 2.4-dichlorophenol onto 2 mixtures: bamboo biochar plus calcium sulphate (BC) and hydroxyapatite plus bamboo biochar plus calcium sulphate (HBC), in a fluidized bed circulation column

2016 ◽  
Vol 18 (2) ◽  
pp. 59-67 ◽  
Author(s):  
Ahmed Hassan Alamin ◽  
Lupong Kaewsichan
Keyword(s):  
Fluidized Bed ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Calcium Sulphate ◽  
Isotherm Models ◽  
Process Time ◽  
Order Kinetic ◽  
Column Adsorption ◽  
Order Kinetic Model

Abstract Sorption studies were carried out to investigate removal of 2.4-dichlorophenol (2.4-DCP) from aqueous solution in a fluidized bed by two types of adsorbent mixtures: BC (Bamboo char plus Calcium sulphate), and HBC (Hydroxyapatite plus Bamboo char plus Calcium sulphate); both manufactured in ball shape. The main material bamboo char was characterized by FTIR, DTA and SEM. The adsorption experiments were conducted in a fluidized bed circulation column. Adsorption, isotherms and kinetic studies were established under 180 min operating process time, at different initial 2.4-DCP solution concentrations ranging from 5–10 mg/L, and at different flow rates ranging from 0.25–0.75 L/min. The data obtained fitted well for both the Langmuir and Freundlich isotherm models; indicating favorable condition of monolayer adsorption. The kinetics of both adsorbents complies with the pseudo second-order kinetic model. BC was proven a new effective composite and low cost adsorbent which can be applied in the field of wastewater treatment, and it can also play an important role in industry water treatment.

Biosorption of strontium ions from aqueous solution using modified eggshell materials

2017 ◽  
Vol 105 (12) ◽  
Author(s):  
Sayed S. Metwally ◽  
Hoda E. Rizk ◽  
Mona S. Gasser
Keyword(s):  
Aqueous Solution ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Sorption Process ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Biomass Materials ◽  
Strontium Ions

AbstractGreen composites emphasize renewable starting materials for better economy using biomass materials. Therefore, low-cost composite biosorbent was prepared by modification of eggshell material using heteropoly acid for removal of strontium ions from aqueous solution. The resulted composite was characterized and evaluated for the sorption process using the batch technique. Low concentration of strontium ions was used to evaluate the sorption sensitivity of the prepared composite. The obtained experimental results illustrated that the modification process of eggshell material enhanced the percent uptake from 49.9 to 95.7%. From kinetic studies, the sorption of strontium ions follows the pseudo-second-order kinetic model. The isotherm studies indicated that Langmuir is more applicable than Freundlich isotherm. Moreover, Dubinin–Radushkevich isotherm was studied. Thermodynamic studies revealed that the sorption process is spontaneous and has endothermic nature. Strontium ions can be desorbed from the modified eggshell using HNO

Sign in / Sign up

Export Citation Format

Share Document