Kinetics of the Ozonation of Tetrabromobisphenol-A in Wastewater

2011 ◽  
Vol 383-390 ◽  
pp. 2945-2950 ◽  
Author(s):  
Jie Zhang ◽  
Shi Long He ◽  
Mei Feng Hou ◽  
Li Ping Wang ◽  
Li Jiang Tian
Keyword(s):  
Rate Constants ◽  
Apparent Rate Constant ◽  
Reaction Rate ◽  
Batch Reactor ◽  
Kinetic Studies ◽  
Tetrabromobisphenol A ◽  
First Order ◽  
Reaction Rate Constants ◽  
Pseudo First Order ◽  
Kinetics Of

The kinetics of TBBPA degradation by ozonation in semi-batch reactor was studied. The reaction rate constants of TBBPA with O3 and •OH were measured by means of direct ozone attack and competition kinetics, and the values of which were 6.10 l/(mol•s), 4.8×109 l/(mol•s), respectively. Results of kinetic studies showed that TBBPA degradation by ozonation under the different conditions tested followed the pseudo-first-order. The values of apparent rate constant of TBBPA degradation increased with the increase of ozone dosage and pH, but decreased with the increase of initial TBBPA concentration.

Effects of Carrageenan and Chitosan as Coating Materials on the Thermal Degradation of Microencapsulated Phycocyanin from Spirulina sp.

2019 ◽  
Vol 15 (5-6) ◽  
Author(s):  
H. Hadiyanto ◽  
Marcelinus Christwardana ◽  
Meiny Suzery ◽  
Heri Sutanto ◽  
Ayu Munti Nilamsari ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Thermal Degradation ◽  
Rate Constants ◽  
Reaction Rate ◽  
Order Reaction ◽  
Coating Materials ◽  
First Order ◽  
Reaction Rate Constants ◽  
Kinetics Of

AbstractPhycocyanin is a natural substance that can be used as an antioxidant and food colorant. The quality of phycocyanin deteriorates when it is exposed to heat, and such deterioration is evidenced by decreases in its antioxidant activity and color. Encapsulation, which introduces a coating material over a substance of interest, has been applied to prevent changes in substance quality. The objective of the present research is to evaluate the kinetics of thermal degradation of phycocyanin coated with carrageenan or chitosan. Encapsulated phycocyanin samples were exposed to temperatures of 40, 50, or 60 °C for 90 min, and kinetics of the resulting degradation was evaluated to determine changes in sample quality. The results showed that the thermal degradation of encapsulated phycocyanin at 40–60 °C follows first-order reaction kinetics with reaction rate constants (k) of 4.67–9.17 × 10–5 s-1 and 3.83–7.67 × 10–5 s-1 for carrageenan and chitosan, respectively, and that the k of encapsulated phycocyanin is slower than that obtained from samples without the coating materials (control). Encapsulation efficiencies (EE) of 68.66 % and 76.45 %, as well as loading capacities of 45.28 % and 49.16 %, were, respectively, obtained for carrageenan and chitosan.

scholarly journals Reaction Kinetics of Carbon Dioxide in Aqueous Diethanolamine Solutions Using the Stopped-Flow Technique

2012 ◽  
Vol 19 (1) ◽  
pp. 55-66 ◽  
Author(s):  
Marta Siemieniec ◽  
Hanna Kierzkowska-Pawlak ◽  
Andrzej Chacuk
Keyword(s):  
Carbon Dioxide ◽  
Reaction Kinetics ◽  
Rate Constants ◽  
Reaction Rate ◽  
Reaction Rate Constant ◽  
Stopped Flow ◽  
First Order ◽  
Pseudo First Order ◽  
Kinetics Of ◽  
Good Agreement

Reaction Kinetics of Carbon Dioxide in Aqueous Diethanolamine Solutions Using the Stopped-Flow Technique The pseudo-first-order rate constants (kOV) for the reactions between CO2 and diethanolamine have been studied using the stopped-flow technique in an aqueous solution at 293, 298, 303 and 313 K. The amine concentrations ranged from 167 to 500 mol·m-3. The overall reaction rate constant was found to increase with amine concentration and temperature. Both the zwitterion and termolecular mechanisms were applied to correlate the experimentally obtained rate constants. The values of SSE quality index showed a good agreement between the experimental data and the corresponding fit by the use of both mechanisms.

Kinetics of Reductive Dechlorination of DDT in Soil with Zero-Valent Iron

2011 ◽  
Vol 295-297 ◽  
pp. 1236-1239
Author(s):  
Yin Hai Lang ◽  
Min Jie Wang ◽  
Nan Nan Wang
Keyword(s):  
Kinetic Model ◽  
Reductive Dechlorination ◽  
Reaction Rate ◽  
Zero Valent Iron ◽  
Order Kinetic ◽  
First Order ◽  
Reaction Rate Constants ◽  
Order Kinetic Model ◽  
Pseudo First Order ◽  
Kinetics Of

In this study, reductive dechlorination of DDT compounds by zero-valent iron in Jiangxi red soil was investigated. DDT compounds were effectively dechlorinated by zero-valent iron. The pseudo-first-order kinetic model for 2,4¢-DDT and 4,4¢-DDT reduction with zero-valent iron was proposed. The reaction rate constants for 2,4¢-DDT and 4,4¢-DDT were 1.19´10-2(min-1) and 1.44´10-2(min-1), respectively. The dechlorination of 2,4¢-DDT and 4,4¢-DDT were mainly affected by the specific surface area of iron. The data from the variable-pH experiments (between 3.6 and 8.8) suggested that pH does not play a role in the rate-determination step.

scholarly journals Aquation reaction of iminodiacetate complex of oxidovanadium(IV) with 2,2’-bipyridine induced by Fe(III) ions: Kinetic studies

2019 ◽  
Vol 44 (4) ◽  
pp. 300-306
Author(s):  
Joanna Drzeżdżon ◽  
Agnieszka Piotrowska-Kirschling ◽  
Lech Chmurzyński ◽  
Dagmara Jacewicz
Keyword(s):  
Aqueous Solutions ◽  
Computer Program ◽  
Rate Constants ◽  
Reaction Rate ◽  
Kinetic Studies ◽  
Reaction Rate Constants ◽  
Different Temperatures ◽  
Kinetics Of

The kinetics of the aquation reaction of the [VO(ida)(bipy)]·2H2O (VO(ida)(bipy)) complex (where ida = iminodiacetate anion and bipy = 2,2’-bipyridine) promoted by [Fe(H2O)6]3+ ions were investigated in aqueous solutions. Spectrophotometric studies were carried out at different temperatures in the range of 293.15–313.15 K. The concentration of the [Fe(H2O)6]3+ (Fe3+) ions was kept within the range of 2 × 10–4 to 8 × 10–4 mol L–1, and the concentration of VO(ida)(bipy) was 1 × 10–3 mol L–1. The values of the observable reaction rate constants were calculated based on the Glint computer program. Furthermore, the mechanism for the aquation of VO(ida)(bipy), induced by Fe(III) ions, has been proposed.

scholarly journals Kinetic Monte Carlo simulation of the growth of CdSe nanocrystals

2021 ◽  
Vol 134 (1) ◽  
pp. 7-23
Author(s):  
S.M. Asadov ◽  
Keyword(s):  
Monte Carlo ◽  
Rate Constants ◽  
Reaction Rate ◽  
Kinetic Monte Carlo ◽  
Cdse Nanocrystals ◽  
Modified Model ◽  
Early Maturation ◽  
Reaction Rate Constants ◽  
Colloidal Crystallization ◽  
Kinetics Of

This article is devoted to modeling the kinetics of colloidal crystallization of cadmium selenide (CdSe) nanoparticles (NPs). The kinetic equation is modified, considering the contributions of the reaction rate constants of individual stages. It includes the reaction rate constants, thermodynamic and calculated parameters, and physical properties. There is used modified kinetic model based on the crystallization equation. There are considered the contributions of adsorption, desorption, and migration of nucleated particles at different times. Modified model assumes that, upon crystallization of NPs CdSe, monomer units depend on the frequency of attachment and detachment transitions of the monomer–CdSe complex. In this case, the transformation of the precursor into a monomer, the formation of an effective monomer and nucleation pass into the growth stage of (NC CdSe) nanocrystals with a seeded mass. In the process, the resulting nanocluster will continue to grow due to early maturation, aging, and subsequent growth into larger NC CdSe. The Kinetic Monte Carlo method (KMC) is used to approximate the model of the nucleation–growth of NC considering different contributions to the reaction rate constants. The modified model with the use of KMC allows to describe the dependences of the kinetic rate constants on the average radius of nanoparticles as a function of time, concentration, and distribution of NC CdSe at a given time. There are described conditions for the formation of NPs CdSe with an evolutionary distribution function of NC CdSe in size space. The results of modeling the kinetics of colloidal crystallization of CdSe can be used to control nucleation rate and growth of NPs CdSe, as well as similar systems in the formation of high-quality NC.

Kinetik der Reaktion von 2.4-Dinitrofluorbenzol mit Imidazol-, SH- und Imidazol-SH-Verbindungen / Kinetics of the Reaction of 2,4-dinitro-1-fluorobenzene with Imidazole-, SH- and Imidazole-SH-compounds

1971 ◽  
Vol 26 (10) ◽  
pp. 1010-1016 ◽  
Author(s):  
Renate Voigt ◽  
Helmut Wenck ◽  
Friedhelm Schneider
Keyword(s):  
Temperature Dependence ◽  
Rate Constants ◽  
Reaction Rate ◽  
Ph Dependence ◽  
First Order ◽  
Molecular Transfer ◽  
Thiolate Anion ◽  
Nucleophilic Reactivity ◽  
Kinetics Of ◽  
Lindley Equation

First order rate constants of the reaction of a series of SH-, imidazole- and imidazole/SH-compounds with FDNB as well as their pH- and temperature dependence were determined. Some of the tested imidazole/SH-compounds exhibit a higher nucleophilic reactivity as is expected on the basis of their pKSH-values. This enhanced reactivity is caused by an activation of the SH-groups by a neighbouring imidazole residue. The pH-independent rate constants were calculated using the Lindley equation.The kinetics of DNP-transfer from DNP-imidazole to SH-compounds were investigated. The pH-dependence of the reaction displays a maximum curve. Donor in this reaction is the DNP-imidazolecation and acceptor the thiolate anion.The reaction rate of FDNB with imidazole derivatives is two to three orders of magnitude slower than with SH-compounds.No inter- or intra-molecular transfer of the DNP-residue from sulfure to imidazole takes place.

KINETIC STUDIES OF METHYL-BIS-β-CHLOROETHYLAMINE: III. THE KINETICS OF THE DIMERIZATION IN METHANOL

1948 ◽  
Vol 26b (2) ◽  
pp. 175-180 ◽  
Author(s):  
C. A. Winkler ◽  
A. W. Hay ◽  
A. L. Thompson
Keyword(s):  
Rate Constants ◽  
Initial Rate ◽  
Kinetic Studies ◽  
First Order ◽  
Rate Expression ◽  
Principal Reaction ◽  
Kinetics Of ◽  
Rate Controlling Step

The principal reaction of methyl-bis-β-chloroethylamine in methanol is dimerization, which results in one chlorine from each molecule becoming ionic, but this is accompanied by slight alcoholysis. The rate-controlling step is believed to be the first order formation of an ethylenimonium ion which reacts rapidly with one of its kind to form dimer. The rate expression as calculated from initial rate constants is k (initial) = 4.0 × 1013e−19600/RThr.−1.

scholarly journals Reactivity and kinetic studies of benzofuran hydrodeoxygenation over a Ni2P-O/MCM-41 catalyst

2019 ◽  
Vol 44 (4) ◽  
pp. 307-315 ◽  
Author(s):  
Xueya Dai ◽  
Hua Song ◽  
Hualin Song ◽  
Jing Gong ◽  
Feng Li ◽  
...  
Keyword(s):  
Kinetic Studies ◽  
Time Analysis ◽  
Liquid Ratio ◽  
Order Model ◽  
Free Products ◽  
First Order ◽  
Reaction Rate Constants ◽  
Different Temperatures ◽  
Kinetics Of ◽  
Mcm 41

A nickel phosphide hydrodeoxygenation catalyst (Ni2P-O/MCM-41) was prepared using a new synthetic method. The as-prepared catalyst was evaluated in the hydrodeoxygenation of benzofuran, and the effects of reaction temperature, pressure, and the H2/liquid ratio were investigated. A pseudo first-order model was employed to describe the reaction kinetics of benzofuran hydrodeoxygenation over the Ni2P-O/MCM-41 catalyst. The reaction rate constants ( k1– k5) at different temperatures were determined according to this model. At 533 K, the conversion of 2-ethylphenol in to ethylbenzene began to increase dramatically, and the yield of O-free product, ethylcyclohexane, started to increase rapidly. At 573 K, 3.0 MPa, and a H2/liquid ratio of 500 (V/V), the conversion of benzofuran over Ni2P-O/MCM-41 reached 93%, and the combined yield of O-free products was 91%. Contact time analysis indicated that demethylation was not favored over the Ni2P-O/MCM-41 catalyst.

Carbohydrates in alkaline systems. II. Kinetics of the transformation and degradation reactions of cellobiose, cellobiulose, and 4-O-β-D-glucopyranosyl-D-mannose in 1 M sodium hydroxide at 22 °C

1969 ◽  
Vol 47 (21) ◽  
pp. 3957-3964 ◽  
Author(s):  
Donald J. MacLaurin ◽  
John W. Green
Keyword(s):  
Sulfuric Acid ◽  
Sodium Hydroxide ◽  
Column Chromatography ◽  
Rate Constants ◽  
Reaction Rate ◽  
Reaction System ◽  
Reaction Rate Constants ◽  
Degradation Reactions ◽  
Fructose 2 ◽  
Kinetics Of

Rates of isomerization, epimerization, and degradation reactions were measured for cellobiose (7), cellobiulose (8), and 4-O-β-D-glucopyranosyl-D-mannose (9) at 0.001 M in 1 M NaOH under N2 in the dark at 22 °C. Reaction system resolution was by column chromatography on anion resins in the borate form. Assay for D-glucose (1), D-fructose (2), D-mannose (3), and 7,8, and 9 was by continuous automated colorimetry of column effluent with orcinol–sulfuric acid as reagent. Reaction rate constants (h−1) found: k78 0.078, k79 0.0005, k7,10 0.002, k87 0.022, k89 0.003 k81 0.065, k8,12 0.023, k97 0.002, k98 0.013, k9,11 0.006 where 10,11, and 12 are other products than 1,2,3,7,8, and 9. Details for preparation of 8 and 9 are given.

Sign in / Sign up

Export Citation Format

Share Document