Wearability of Non-Smooth Surface with Laser Treatment in the Different Cooling Media

2011 ◽  
Vol 411 ◽  
pp. 542-547 ◽  
Author(s):  
Zhen Wen Yu ◽  
Wen Cui Xiu ◽  
Li Chen
Keyword(s):  
Cast Iron ◽  
Laser Treatment ◽  
Body Surface ◽  
Laser Processing ◽  
Smooth Surface ◽  
Processing Parameters ◽  
The Body ◽  
Water Medium ◽  
Cooling Media ◽  
Better Than

This paper compared wearability of the non-smoothed unit body of the samples treated in water medium with in air, by studying on cast iron intimating the body surface organism at the same laser processing parameters. The research indicated that the size and microhardness of non-smoothed unit body determined the wearability of the samples, and the wearability of the samples treated in water medium was relatively better than in the air.

Influence of Work Media on Surface Property of Compacted Graphite Cast Iron Processed by Laser Local Processing

2015 ◽  
Vol 817 ◽  
pp. 385-391
Author(s):  
Yan Liu ◽  
Hong Zhou ◽  
Jing Yan Cheng ◽  
Chun Yan Yang ◽  
Peng Zhang
Keyword(s):  
Wear Resistance ◽  
Cast Iron ◽  
Surface Property ◽  
Laser Processing ◽  
Smooth Surface ◽  
Local Processing ◽  
Thermal Crack ◽  
Micro Hardness ◽  
Compacted Graphite ◽  
Graphite Cast Iron

In order to enhance surface property of brake materials, compacted graphite cast iron (CGI) with non-smooth surface was processed by laser local processing. This study focuses on the influence of the work media on wear resistance and thermal fatigue resistance of specimens. The results showed that when the work media were air and water respectively, laser local processing could enhance surface property of CGI. Changing work media could not change phase compositions of the laser processing area, but refined their microstructures, which enhanced their micro-hardness. By this way, the specimens’ wear resistance and resistance to thermal crack initiation were further improved, while their resistance to thermal crack propagation was influenced by cracks on bionic units.

MANAGEMENT OF BURNS IN CHILDREN

PEDIATRICS ◽  
1960 ◽  
Vol 25 (5) ◽  
pp. 886-895
Author(s):  
A. W. Farmer
Keyword(s):  
Body Surface ◽  
Emergency Care ◽  
Local Treatment ◽  
The Body ◽  
Surgical Debridement ◽  
Burned Patient ◽  
Secondary Shock ◽  
The Common ◽  
Early Restoration ◽  
Better Than

Burns are one of the common injuries of childhood. Prevention is better than cure. Most burns are minor in extent and require local treatment only. All second and third degree burns in children involving over 10% of the body surface should be regarded as major injuries, requiring emergency care. With adequate resuscitative therapy death during the phase of secondary shock is unusual except for massive burns. The trend in burn therapy is for early surgical debridement, followed by early restoration of skin cover, in order to by-pass serious complications due to infection and nutritional changes. It is most important to protect the extensively burned patient from exposure to additional illnesses, and to restore the surface as early as possible.

On Wear Resistance of Laser-Treated Striated Non-Smooth Surface of Nodular Cast Iron

2014 ◽  
Vol 881-883 ◽  
pp. 1268-1270
Author(s):  
Zhe Ming
Keyword(s):  
Wear Resistance ◽  
Cast Iron ◽  
Laser Processing ◽  
Smooth Surface ◽  
Nodular Cast Iron ◽  
Processing Technology ◽  
Optimal Conditions ◽  
Single Factor

This paper presents a conclusion drawn by adopting laser processing technology to form striated non-smooth surface of nodular cast iron and study the factors that affect the wear resistance at the normal temperature by means of single factor testing and orthogonal testing. It shows that the optimal conditions of wear resistance are 3-min (wear period),0.98mm (grid space), and 200 r·min-1 (otary velocity).

The Role of Computer Modeling in Electrocardiography

1990 ◽  
Vol 29 (04) ◽  
pp. 282-288 ◽  
Author(s):  
A. van Oosterom
Keyword(s):  
Electrical Activity ◽  
Computer Modeling ◽  
Body Surface ◽  
Electrical Current ◽  
The Body ◽  
Volume Conductor ◽  
Current Generator ◽  
Cardiac Electrical Activity ◽  
Source Models

AbstractThis paper introduces some levels at which the computer has been incorporated in the research into the basis of electrocardiography. The emphasis lies on the modeling of the heart as an electrical current generator and of the properties of the body as a volume conductor, both playing a major role in the shaping of the electrocardiographic waveforms recorded at the body surface. It is claimed that the Forward-Problem of electrocardiography is no longer a problem. Several source models of cardiac electrical activity are considered, one of which can be directly interpreted in terms of the underlying electrophysiology (the depolarization sequence of the ventricles). The importance of using tailored rather than textbook geometry in inverse procedures is stressed.

The use of Body Surface Index as a Better Clinical Health indicators Compare to Body Mass Index and Body Surface Area for Clinical Application

2018 ◽  
pp. 131-136
Author(s):  
Shirazu I. ◽  
Theophilus. A. Sackey ◽  
Elvis K. Tiburu ◽  
Mensah Y. B. ◽  
Forson A.
Keyword(s):  
Surface Area ◽  
Body Surface Area ◽  
Clinical Application ◽  
Body Surface ◽  
Body Height ◽  
Health Indicators ◽  
The Body ◽  
Body Parameters ◽  
The Relationship ◽  
Individual Body

The relationship between body height and body weight has been described by using various terms. Notable among them is the body mass index, body surface area, body shape index and body surface index. In clinical setting the first descriptive parameter is the BMI scale, which provides information about whether an individual body weight is proportionate to the body height. Since the development of BMI, two other body parameters have been developed in an attempt to determine the relationship between body height and weight. These are the body surface area (BSA) and body surface index (BSI). Generally, these body parameters are described as clinical health indicators that described how healthy an individual body response to the other internal organs. The aim of the study is to discuss the use of BSI as a better clinical health indicator for preclinical assessment of body-organ/tissue relationship. Hence organ health condition as against other body composition. In addition the study is `also to determine the best body parameter the best predict other parameters for clinical application. The model parameters are presented as; modeled height and weight; modelled BSI and BSA, BSI and BMI and modeled BSA and BMI. The models are presented as clinical application software for comfortable working process and designed as GUI and CAD for use in clinical application.

Mannose-binding C-type lectins as defense molecules on the body surface of the sea urchin Pseudocentrotus depressus

2021 ◽  
Vol 116 ◽  
pp. 103915
Author(s):  
Chihiro Iiyama ◽  
Fuyu Yoneda ◽  
Masaya Tsutsumi ◽  
Shigeyuki Tsutsui ◽  
Osamu Nakamura
Keyword(s):  
Sea Urchin ◽  
Body Surface ◽  
The Body ◽  
Mannose Binding ◽  
Defense Molecules

Development and Validation of a New Scoring Tool to Evaluate the Clinical Evolution of Adult Patients with Nonsegmental Vitiligo

Dermatology ◽  
2021 ◽  
pp. 1-9
Author(s):  
María Luisa Peralta-Pedrero ◽  
Denisse Herrera-Bringas ◽  
Karla Samantha Torres-González ◽  
Martha Alejandra Morales-Sánchez ◽  
Fermín Jurado Santa-Cruz ◽  
...  
Keyword(s):  
Body Surface ◽  
Task Force ◽  
Intraclass Correlation ◽  
The Body ◽  
Response To Treatment ◽  
Similar Response ◽  
Clinical Evolution ◽  
Wide Range ◽  
Patient Reported ◽  
Extreme Groups

<b><i>Background:</i></b> Vitiligo has an unpredictable course and a variable response to treatment. Furthermore, the improvement of some vitiligo lesions cannot be considered a guarantee of a similar response to the other lesions. Instruments for patient-reported outcome measures (PROM) can be an alternative to measure complex constructions such as clinical evolution. <b><i>Objective:</i></b> The aim of this study was to validate a PROM that allows to measure the clinical evolution of patients with nonsegmental vitiligo in a simple but standardized way that serves to gather information for a better understanding of the disease. <b><i>Methods:</i></b> The instrument was created through expert consensus and patient participation. For the validation study, a prospective cohort design was performed. The body surface area affected was measured with the Vitiligo Extension Score (VES), the extension, the stage, and the spread by the evaluation of the Vitiligo European Task Force assessment (VETFa). Reliability was determined with test-retest, construct validity through hypothesis testing, discriminative capacity with extreme groups, and response capacity by comparing initial and final measurements. <b><i>Results:</i></b> Eighteen semi-structured interviews and 7 cognitive interviews were conducted, and 4 dermatologists were consulted. The instrument Clinical Evolution-Vitiligo (CV-6) was answered by 119 patients with a minimum of primary schooling. A wide range was observed in the affected body surface; incident and prevalent cases were included. The average time to answer the CV-6 was 3.08 ± 0.58 min. In the test-retest (<i>n</i> = 53), an intraclass correlation coefficient was obtained: 0.896 (95% CI 0.82–0.94; <i>p</i> &#x3c; 0.001). In extreme groups, the mean score was 2 (2–3) and 5 (4–6); <i>p</i> &#x3c; 0.001. The initial CV-6 score was different from the final one and the change was verified with VES and VETFa (<i>p</i> &#x3c; 0.05, <i>n</i> = 92). <b><i>Conclusions:</i></b> The CV-6 instrument allows patient collaboration, it is simple and brief, and it makes it easier for the doctor to focus attention on injuries that present changes at the time of medical consultation.

scholarly journals Characteristics of Cr-B Coatings Produced on Vanadis® 6 Tool Steel Using Laser Processing

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2621
Author(s):  
Aneta Bartkowska
Keyword(s):  
Corrosion Resistance ◽  
Tool Steel ◽  
Laser Processing ◽  
Chemical Elements ◽  
Steel Substrate ◽  
Processing Parameters ◽  
Beam Power ◽  
Laser Beam Power ◽  
High Microhardness ◽  
The Impact

The paper presents the results of a study of the microstructure, chemical composition, microhardness and corrosion resistance of Cr-B coatings produced on Vanadis 6 tool steel. In this study, chromium and boron were added to the steel surface using a laser alloying process. The main purpose of the study was to determine the impact of those chemical elements on surface properties. Chromium and boron as well as their mixtures were prepared in various proportions and then were applied on steel substrate in the form of precoat of 100 µm thickness. Depending on the type of precoat used and laser processing parameters, changes in microstructure and properties were observed. Coatings produced using precoat containing chromium and boron mixture were characterized by high microhardness (900 HV0.05–1300 HV0.005) while maintaining good corrosion resistance. It was also found that too low laser beam power contributed to the formation of cracks and porosity.

Sign in / Sign up

Export Citation Format

Share Document