β-Ni(OH)2 Nanospheres Synthesized via the Easy Hydrothermal Method

2012 ◽  
Vol 510 ◽  
pp. 575-578
Author(s):  
Xiao Ming Fu
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Hydrothermal Method ◽  
Reaction Temperature ◽  
Nickel Nitrate ◽  
X Ray Diffraction ◽  
Ammonia Water ◽  
X Ray ◽  
Scanning Electron

β-Ni (OH)2nanospheres have been successfully synthesized with nickel nitrate as nickel source and stronger ammonia water as precipitant by the hydrothermal method. The phase and the morphologies of the samples have been characterized and analyzed by X-ray diffraction (XRD) and Scanning electron microscope (SEM). XRD shows that the phase of the samples isβ-Ni (OH)2. SEM confirms that the increase of the reaction temperature is propitious to the synthesis ofβ-Ni (OH)2nanospheres, which are synthesized at at 180 °C for 48 h with pH=9 by the hydrothermal method.

Synthesis of CuO Flower-Nanostructure via the Hydrothermal Method

2013 ◽  
Vol 873 ◽  
pp. 131-134
Author(s):  
Xiao Ming Fu ◽  
Jie Ren
Keyword(s):  
Electron Microscope ◽  
Reaction Time ◽  
Scanning Electron Microscope ◽  
Hydrothermal Method ◽  
Reaction Temperature ◽  
Xrd Analysis ◽  
Sem Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

CuO flower-nanostructures are successfully synthesized with CuCl2 as copper source and Na2CO3 as auxiliary salt at 180 °C for 24 h via the simple hydrothermal method. The phase and the morphologies of the samples have been characterized and analyzed by XRD (X-ray diffraction) and SEM (Scanning electron microscope), respectively. XRD analysis shows that the phase of as obtained samples is CuO. SEM analysis confirms that the increase of the reaction temperature is propitious to synthesize CuO flower-nanostructures while the increase of the reaction time is not in favor of their synthesis. The influence of the increase of the auxiliary salt on the morphology of CuO flower-nanostructures is not remarkable. The mechanism of the formation of CuO flower-nanostructure is discussed.

The Influence of the Hydrothermal Conditions on the Morphologies of β-Ni(OH)2

2012 ◽  
Vol 562-564 ◽  
pp. 494-497
Author(s):  
Xiao Ming Fu
Keyword(s):  
Electron Microscope ◽  
High Temperature ◽  
Reaction Time ◽  
Scanning Electron Microscope ◽  
Reaction Temperature ◽  
X Ray Diffraction ◽  
Hydrothermal Conditions ◽  
X Ray ◽  
Low Reaction Temperature ◽  
Scanning Electron

Flower-like β-Ni(OH)2 and nanoflakes have been successfully synthesized with nickel nitrate as nickel source and stronger ammonia water as precipitant via the hydrothermal method. The phase and the morphologies of the samples have been characterized and analyzed by XRD (X-ray diffraction) and SEM (Scanning electron microscope), respectively. XRD shows that the phase of the samples is β-Ni(OH)2. SEM confirms that The low reaction temperature is propitious to the synthesis of flower-like β-Ni(OH)2, and with the increase of the reaction time the nanoflakes of flower-like β-Ni(OH)2 become much thinner. However, The high temperature is in favor of the synthesis of β-Ni(OH)2 nanosflakes, and with the further increase of the reaction temperature.

CuO Microspheres Synthesized via the Easy Hydrothermal Method

2012 ◽  
Vol 159 ◽  
pp. 84-87
Author(s):  
Xiao Ming Fu
Keyword(s):  
Electron Microscope ◽  
Reaction Time ◽  
Scanning Electron Microscope ◽  
Hydrothermal Method ◽  
Xrd Analysis ◽  
Sem Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cuo Microspheres ◽  
Scanning Electron

CuO microspheres are successfully synthesized with CuCl2 as copper source and Na2CO3 as auxiliary salt at 240 °C for 24 h via the easy hydrothermal method. The phase and the morphologies of the samples have been characterized and analyzed by XRD (X-ray diffraction) and SEM (Scanning electron microscope), respectively. XRD analysis shows that the phase of as obtained samples is CuO. SEM analysis confirms that the increase of the reaction time, the reaction temperature and the auxiliary salt is propitious to synthesize CuO microspheres.

scholarly journals REVO4 (RE=La, Pr, Nd) nanocrystals: Synthesis and investigation of photocatalytic degradation of some dyes

2021 ◽  
Vol 10 (3) ◽  
pp. 82-86
Author(s):  
Hai Nguyen Van ◽  
Huong Nguyen Thi
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Visible Light ◽  
Photocatalytic Degradation ◽  
Hydrothermal Method ◽  
Organic Dyes ◽  
X Ray Diffraction ◽  
X Ray ◽  
Photocatalytic Activities ◽  
Scanning Electron

In this, work, a series of REVO4 (RE = La, Pr, Nd) nanoparticles were successfully fabricated by the hydrothermal method. The as-synthesized REVO4 nanoparticles were characterized by various techniques of X-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDX). The photocatalytic activities of obtained products were investigated by photodegradation of moderacid red RS and direct yellow GX under visible light. The NdVO4 photocatalyst showed higher discoloration of organic dyes than LaVO4 and PrVO4. About 64% moderacid red RS was degraded within 150 minutes catalyzed by the catalyst NdVO4.

PENGGUNAAN TiO2 PARTIKEL NANO HASIL SINTESIS BERBASIS AIR MENGGUNAKAN METODA SOL-GEL PADA BAHAN KAPAS SEBAGAI APLIKASI UNTUK TEKSTIL ANTI UV

Arena Tekstil ◽  
2013 ◽  
Vol 28 (1) ◽  
Author(s):  
Maya Komalasari ◽  
Bambang Sunendar
Keyword(s):  
Fourier Transform ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Sol Gel ◽  
Crosslinking Agent ◽  
X Ray Diffraction ◽  
Nano Tio2 ◽  
X Ray ◽  
Infra Red ◽  
Scanning Electron

Partikel nano TiO2 berbasis air dengan pH basa telah berhasil disintesis dengan menggunakan metode sol-gel dan diimobilisasi pada kain kapas dengan menggunakan kitosan sebagai zat pengikat silang. Sintesis dilakukan  dengan prekursor TiCl4 pada konsentrasi 0,3 M, 0,5 M dan 1 M, dan menggunakan templat kanji dengan proses kalsinasi pada suhu 500˚C selama 2 jam. Partikel nano TiO2 diaplikasikan ke kain kapas dengan metoda pad-dry-cure dan menggunakan kitosan sebagai crosslinking agent. Berdasarkan hasil Scanning Electron Microscope (SEM),diketahui bahwa morfologi partikel TiO2 berbentuk spherical dengan ukuran nano (kurang dari 100 nm). Karakterisasi X-Ray Diffraction (XRD) menunjukkan adanya tiga tipe struktur kristal utama, yaitu (100), (101) dan (102) dengan fasa kristal yang terbentuk adalah anatase dan rutile. Pada karakterisasi menggunakan SEM terhadap serbuk dari TiO2 yang telah diaplikasikan ke permukaan kain kapas, terlihat adanya imobilisasi partikel nano TiO2 melalui ikatan hidrogen silang dengan kitosan pada kain kapas. Hasil analisa tersebut kemudian dikonfirmasi dengan FTIR (Fourier Transform Infra Red) yang hasilnya memperlihatkan puncak serapan pada bilangan gelombang 3495 cm-1, 2546 cm-1, dan 511 cm-1,  yang masing-masing diasumsikan sebagai adanya vibrasi gugus fungsi O-H, N-H dan Ti-O-Ti. Hasil SEM menunjukkan pula bahwa kristal nano yang terbentuk diantaranya adalah fasa rutile , yang berdasarkan literatur terbukti dapatberfungsi sebagai anti UV.

Photoelectrochemical Properties of Anatase TiO2 Films Prepared by Improved Liquid Phase Deposition

2015 ◽  
Vol 1120-1121 ◽  
pp. 419-423
Author(s):  
Cai Xia Lei ◽  
X.L. Jiang ◽  
Y. Liu ◽  
X. Liu ◽  
Y.T. Ma ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Liquid Phase ◽  
Scanning Electron Microscope ◽  
Reaction Temperature ◽  
White Light ◽  
Photoelectrochemical Properties ◽  
Liquid Phase Deposition ◽  
X Ray ◽  
Good Crystallinity ◽  
Scanning Electron

In this paper, the hydrothermal-assisted liquid phase deposition (HT-LPD) method has been developed to prepare TiO2 films. The crystalline structures and morphologies of as-prepared TiO2 films were analyzed using an X-ray diffractometer (XRD) and scanning electron microscope (SEM). It was found that the HT-LPD TiO2 film showed good crystallinity with preferrred orientation along c-axis. Moreover, the as-prepared TiO2 films consisted of two layers, with the tiny nanoparticles as the underlying layer and the flower-like clusters as the upper layer. The photoelectrochemical measurements revealed that, when illuminated by the white light, the HT-LPD TiO2 films exhibited a more negative photopotential value and an increased photocurrent value with elevated reaction temperature, excepting for the sample prerared at 150 °C. In summary, the TiO2 films prepared by the improved LPD method could be served as the promising photoanode for the photoelectrochemical applications.

Effect of the Neodymium Content on Mechanical Properties of the Electro-Brush Plated Nano-Al2O3/Ni Composite Coating

2012 ◽  
Vol 525-526 ◽  
pp. 277-280
Author(s):  
Guo Jin ◽  
Xiu Fang Cui ◽  
Er Bao Liu ◽  
Qing Fen Li
Keyword(s):  
Mechanical Properties ◽  
Rare Earth ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Composite Coating ◽  
Nanoindentation Test ◽  
X Ray Diffraction ◽  
X Ray ◽  
Small Cracks ◽  
Scanning Electron

The effect of the neodymium content on mechanical properties of the electro-brush plated nanoAl2O3/Ni composite coating was investigated in this paper. The microstructure and phase structure were studied with scanning electron microscope (SEM) and X-ray diffraction (XRD). The hardness and abrasion properties of several coatings with different neodymium content were studied by nanoindentation test and friction / wear experiment. Results show that the coatings are much finer and more compact when the neodymium was added, and the hardness and abrasion property of the coatings with neodymium were improved obviously. Besides, the small cracks conduced by the upgrowth stress in the coatings were ameliorated when the rare earth neodymium was added. The improvement mechanism was further discussed.

Effect of Briquetting Pressure on the Performance of In Situ Formed Sialon in Al2O3-C Refractory Bricks

2014 ◽  
Vol 881-883 ◽  
pp. 1049-1052 ◽  
Author(s):  
Nai Peng ◽  
Cheng Ji Deng ◽  
Hong Xi Zhu
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
X Ray Diffraction ◽  
X Ray ◽  
Z Value ◽  
Refractory Bricks ◽  
Scanning Electron

In this paper, the effects of briquetting pressure on the performance of in-situ formed Sialon in Al2O3-C refractory bricks are investigated. The phase compositions and microstructure of the Al2O3-C refractory were investigated by X-ray diffraction (XRD) and scanning electron microscope (SEM).The results show the briquetting pressure hardly has effect on the phase of the sintered specimens, two new phases of Sialon with a Z value of 2 and SiC formed. The micrographs of Sialon crystals have the shape of both column and tabular column, but with a cone tip in the specimens sintered at 200MPa and 300MPa and smooth tip in specimens sintered at 400MPa and 500MPa.

Effect of Nickel on Titanium Carbide Synthesized via Tungsten Inert Gas (TIG) Method

2012 ◽  
Vol 620 ◽  
pp. 384-388
Author(s):  
Sharifah Aishah Syed Salim ◽  
Julie Juliewatty Mohamed ◽  
Zainal Arifin Ahmad ◽  
Zainal Arifin Ahmad
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Powder Mixture ◽  
Raw Material ◽  
Inert Gas ◽  
X Ray Diffraction ◽  
X Ray ◽  
Arc Melting ◽  
Elemental Powder Mixture ◽  
Scanning Electron

Numerous methods have been used to produce high purity TiC. There is no previous study has been reported on the formation using single elemental powders of Titanium (Ti) and Carbon (C) with addition Nickel (Ni) by tungsten inert gas (TIG) weld method. In this work, TiC was synthesized via TIG method by arc melting elemental powder mixture of Ti and C at ~5 second (s) and 80 ampere (A). The effect Ni contents on TiC formation was investigated. The mixed raw material was ball milled for 24 hours followed by synthesis via TIG method. The arced samples were characterized by X-ray diffraction (XRD) and Scanning electron microscope (SEM). It was revealed, that small amount of Ni additive to the metal powder allows the production of dense and tough TiC.

scholarly journals Supplementary X-ray studies of the Ni-Sn-Bi system

2007 ◽  
Vol 43 (2) ◽  
pp. 141-150 ◽  
Author(s):  
G.P. Vassilev ◽  
K.I. Lilova ◽  
J.C. Gachon
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Phase Equilibria ◽  
Ternary Compound ◽  
Approximate Formula ◽  
Ternary Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Diffraction Peaks ◽  
Scanning Electron

Phase equilibria were studied in the system Ni-Sn-Bi. Special attention has been paid to the identification of the recently found ternary phase. For this purpose samples were synthesized using intimately mixed powders. After annealing and quenching, all alloys were analyzed by scanning electron microscope and by X-ray diffraction. The results give evidences about the existence of a ternary compound with approximate formula Ni6Sn2Bi to Ni7Sn2Bi. Overlapping of some neighboring diffraction peaks of this phase with NiBi and Ni3Sn_LT is the reason for the difficulties related to the X-ray diffraction identification of the ternary phase.

Sign in / Sign up

Export Citation Format

Share Document