Ribbon Silicon Material for Solar Cells

2012 ◽  
Vol 531 ◽  
pp. 67-70
Author(s):  
Jian Gong Li ◽  
Peng Wu ◽  
Peng Yu ◽  
Shu Ai Li
Keyword(s):  
Renewable Energy ◽  
Solar Cells ◽  
Solar Cell ◽  
Silicon Wafer ◽  
Production Cost ◽  
Low Cost ◽  
Wafer Fabrication ◽  
Ingot Casting ◽  
Fabrication Technology ◽  
Solar Cell Material

Solar cell is one of most important renewable energy. But now it is not be widely used because of its high cost compared with traditional resource. Ribbon silicon is one new low cost solar cell material avoiding ingot casting and slicing. It is a promising silicon wafer fabrication technology alternative to traditional ingot casting and slicing. Using ribbon silicon can make solar cell production cost greatly reduced. In this paper EFG, String Ribbon and a novel silicon wafer are discussed.

scholarly journals Junction Configuration Effects on the Photovoltaic Parameters of a-Si/CZTS Solar Cells

2022 ◽  
Author(s):  
H. Bitam ◽  
B. Hadjoudja ◽  
Beddiaf Zaidi ◽  
C. Shakher ◽  
S. Gagui ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Solar Cells ◽  
Solar Cell ◽  
Open Circuit Voltage ◽  
Open Circuit ◽  
Photovoltaic Devices ◽  
Solar Cell Efficiency ◽  
Cell Efficiency ◽  
Reported Study ◽  
Stated Problem

Due to increased energy intensive human activities resulting accelerated demand for electric power coupled with occurrence of natural disasters with increased frequency, intensity, and duration, it becomes essential to explore and advance renewable energy technology for sustainability of the society. Addressing the stated problem and providing a radical solution has been attempted in this study. To harvest the renewable energy, among variety of solar cells reported, a composite a-Si/CZTS photovoltaic devices has not yet been investigated. The calculated parameters for solar cell based on the new array of layers consisting of a-Si/CZTS are reported in this study. The variation of i) solar cell efficiency as a function of CZTS layer thickness, temperature, acceptor, and donor defect concentration; ii) variation of the open circuit current density as a function of temperature, open circuit voltage; iii) variation of open circuit voltage as a function of the thickness of the CZTS layer has been determined. There has been no reported study on a-Si/CZTS configuration-based solar cell, analysis of the parameters, and study to address the challenges imped efficiency of the photovoltaic device and the same has been discussed in this work. The value of the SnO2/a-Si/CZTS solar cells obtained from the simulation is 23.9 %.

scholarly journals DYNAMIC RESEARCH OF SOLAR CELLS / DINAMINIS SAULĖS ELEMENTO TYRIMAS

2017 ◽  
Vol 8 (6) ◽  
pp. 549-522
Author(s):  
Vytautas Makarskas ◽  
Mindaugas Jurevičius ◽  
Artūras Kilikevičius
Keyword(s):  
Renewable Energy ◽  
Solar Cells ◽  
Solar Cell ◽  
Modal Analysis ◽  
Cell Structure ◽  
Mechanical Vibrations ◽  
Maintenance Costs ◽  
Solar Cell Structure ◽  
Cell Stability ◽  
Renewable Energy Generation

Solar cells are one of the most popular renewable energy generation technologies, because they are reliable, low operating and maintenance costs, to conclude without any moving parts and is a boundless source of energy. In any solar cell can avoid mechanical vibrations, which may produce the solar cell glass, damage to the inner structure. In order to determine the influence of mechanical vibrations of the solar cell structure was carried out theoretical and experimental modal analysis. The study found dangerous solar cell frequencies and their deformation and optimize the method of attachment which provides a better solar cell stability. Saulės elementai – vieni populiariausių atsinaujinančių energijos gavybos technologijų, nes jie patikimi, jų mažos eksploatavimo ir priežiūros išlaidos, šie elementai sudaryti be jokių judančių dalių ir yra beribis energijos šaltinis. Bet saulės elementas neišvengia mechaninių virpesių, kurie gali įskelti saulės elemento stiklą, pažeisti vidinę konstrukciją. Siekiant nustatyti mechaninių virpesių įtaką saulės elemento konstrukcijai, buvo atliktos teorinės ir eksperimentinės modalinės analizės. Tyrime buvo rasti pavojingi saulės elemento dažniai ir jų deformacijos, rastas optimalus tvirtinimo būdas, kuris suteikia geresnį saulės elemento stabilumą.

Organic and nano-structured composite photovoltaics: An overview

2005 ◽  
Vol 20 (12) ◽  
pp. 3167-3179 ◽  
Author(s):  
Sophie E. Gledhill ◽  
Brian Scott ◽  
Brian A. Gregg
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Organic Semiconductors ◽  
Organic Solar Cells ◽  
Organic Materials ◽  
Low Cost ◽  
Open Circuit ◽  
Charge Generation ◽  
Dye Sensitized ◽  
Excitonic Solar Cells

Organic photovoltaic devices are poised to fill the low-cost, low power niche in the solar cell market. Recently measured efficiencies of solid-state organic cells are nudging 5% while Grätzel’s more established dye-sensitized solar cell technology is more than double this. A fundamental understanding of the excitonic nature of organic materials is an essential backbone for device engineering. Bound electron-hole pairs, “excitons,” are formed in organic semiconductors on photo-absorption. In the organic solar cell, the exciton must diffuse to the donor–accepter interface for simultaneous charge generation and separation. This interface is critical as the concentration of charge carriers is high and recombination here is higher than in the bulk. Nanostructured engineering of the interface has been utilized to maximize organic materials properties, namely to compensate the poor exciton diffusion lengths and lower mobilities. Excitonic solar cells have different limitations on their open-circuit photo-voltages due to these high interfacial charge carrier concentrations, and their behavior cannot be interpreted as if they were conventional solar cells. This article briefly reviews some of the differences between excitonic organic solar cells and conventional inorganic solar cells and highlights some of the technical strategies used in this rapidly progressing field, whose ultimate aim is for organic solar cells to be a commercial reality.

Prediction of Solar Cell Materials via Unsupervised Literature Learning

2021 ◽  
Author(s):  
Lei Zhang ◽  
Mu He
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Language Processing ◽  
Perovskite Solar Cells ◽  
Dye Sensitized Solar Cells ◽  
Cell Types ◽  
Data Driven ◽  
Cell Material ◽  
Textual Data ◽  
Solar Cell Material

Abstract Despite the significant advancement of the data-driven studies for physical science, the textual data that are numerous in the literature are not fully embraced by the physics and materials community. In this manuscript, we successfully employ the natural language processing (NLP) technique to unsupervisedly predict the existence of solar cell types including the dye-sensitized solar cells and the perovskite solar cells based on literatures published prior to their first discovery without human annotation. Enlightened by this, we further identify possible solar cell material candidates via NLP starting with a comprehensive training database of 3.2 million paper abstracts published before 2021. The NLP model effectively predicts the existing solar cell materials, while an uncommon solar cell material namely PtSe2 is suggested as an appropriate candidate for the future solar cells. Its optoelectronic properties are comprehensive investigated via first-principles calculations to reveal the decent stability and optoelectronic performance of the NLP-predicted candidate. This study demonstrates the viability of the textual data for the data-driven materials prediction and highlights the NLP method as a powerful tool to reliably predict the solar cell materials.

Nanotechnology for Photovoltaic Energy

2014 ◽  
pp. 319-346
Author(s):  
Salahuddin Qazi ◽  
Farhan A. Qazi
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Low Cost ◽  
Photovoltaic Cells ◽  
Dye Sensitized Solar Cells ◽  
Future Research ◽  
Full Potential ◽  
Solar Panels ◽  
The Cost ◽  
Silicon Based

Solar radiation is plentiful and a clean source of power. However, despite the first practical use of silicon based solar cell more than 50 years ago, it has not been exploited to its full potential due to the high cost of electrical conversion on a per Watt basis. Many new kinds of photovoltaic cells such as multi-junction solar cells dye –sensitized solar cells and organic solar cell incorporating element of nanotechnology have been proposed to increase the efficiency and reduce the cost. Nanotechnology, in the form of quantum dots, nanorods, nanotubes, and grapheme, has been shown to enhance absorption of sunlight, makes low cost flexible solar panels and increases the efficiency of photovoltaic cells. The chapter reviews the state of current photovoltaic cells and challenges it presents. It also discusses the use of nanotechnology in the application of photovoltaic cells and future research directions to improve the efficiency of solar cells and reduce the cost.

Nanotechnology for Photovoltaic Energy

2013 ◽  
pp. 163-191
Author(s):  
Salahuddin Qazi ◽  
Farhan A. Qazi
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Low Cost ◽  
Photovoltaic Cells ◽  
Dye Sensitized Solar Cells ◽  
Future Research ◽  
Full Potential ◽  
Solar Panels ◽  
The Cost ◽  
Silicon Based

Solar radiation is plentiful and a clean source of power. However, despite the first practical use of silicon based solar cell more than 50 years ago, it has not been exploited to its full potential due to the high cost of electrical conversion on a per Watt basis. Many new kinds of photovoltaic cells such as multi-junction solar cells dye –sensitized solar cells and organic solar cell incorporating element of nanotechnology have been proposed to increase the efficiency and reduce the cost. Nanotechnology, in the form of quantum dots, nanorods, nanotubes, and grapheme, has been shown to enhance absorption of sunlight, makes low cost flexible solar panels and increases the efficiency of photovoltaic cells. The chapter reviews the state of current photovoltaic cells and challenges it presents. It also discusses the use of nanotechnology in the application of photovoltaic cells and future research directions to improve the efficiency of solar cells and reduce the cost.

Embedding of Carbon Nanotubes on p-Type Silicon for Use in Solar Cells and PV Devices

2008 ◽  
Author(s):  
Abhishek Kumar ◽  
Nikhil Dhawan
Keyword(s):  
Carbon Nanotubes ◽  
Solar Cells ◽  
Solar Cell ◽  
Silicon Wafer ◽  
Three Dimensional ◽  
The Sun ◽  
Future Prospects ◽  
Nanotube Bundles ◽  
Type Silicon ◽  
P Type

Carbon nanotube bundles were precisely grown atop a p-type silicon wafer that had been treated with catalysts to produce geometries that resemble three-dimensional nano-models to extract more power from the sun. The embedded carbon nanotubes bundles on silicon wafer promise more opportunity for each photon of sunlight to interact with resulting solar cell, as a result of increase of surface area available to produce electricity. The paper discusses morphology of grown nanotubes on silicon wafer along with future prospects of Si-CNTs fabricated solar cells.

scholarly journals Unconventional Solar Energy: Singlet Fission

2019 ◽  
Vol 03 (01) ◽  
pp. 84-91 ◽  
Author(s):  
Josef Michl
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Solar Energy ◽  
Excitation Energy ◽  
Triplet State ◽  
Excited Molecule ◽  
Singlet Fission ◽  
Single Junction ◽  
Simple Rules ◽  
Solar Cell Material

Described simply, singlet fission is a process in which a singlet excited molecule transfers about half of its excitation energy to a neighbor molecule, both end up in their triplet state, and the two triplet excitations diffuse apart. The process is of interest for solar cells. Used in conjunction with ordinary solar cell material, a layer of singlet-fission material offers an opportunity to utilize higher energy photons more efficiently. The maximum theoretical efficiency is then close to 1/2 instead of the Shockley-Queisser value of 1/3 that applies to an ordinary single-junction cell. The problem that prevents an immediate production of singlet fission solar cells is the dearth of sufficiently stable efficient materials. The formulation of simple rules for the design of suitable compounds for the purpose is discussed.

scholarly journals III–V Multijunction Solar Cell Integration with Silicon: Present Status, Challenges and Future Outlook

2014 ◽  
Vol 1 (3-4) ◽  
Author(s):  
Nikhil Jain ◽  
Mantu K. Hudait
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
High Efficiency ◽  
Low Cost ◽  
Si Substrate ◽  
Future Outlook ◽  
Si Solar Cells ◽  
Multijunction Solar Cells ◽  
The Future ◽  
Multijunction Solar Cell

AbstractAchieving high-efficiency solar cells and at the same time driving down the cell cost has been among the key objectives for photovoltaic researchers to attain a lower levelized cost of energy (LCOE). While the performance of silicon (Si) based solar cells have almost saturated at an efficiency of ~25%, III–V compound semiconductor based solar cells have steadily shown performance improvement at ~1% (absolute) increase per year, with a recent record efficiency of 44.7%. Integration of such high-efficiency III–V multijunction solar cells on significantly cheaper and large area Si substrate has recently attracted immense interest to address the future LCOE roadmaps by unifying the high-efficiency merits of III–V materials with low-cost and abundance of Si. This review article will discuss the current progress in the development of III–V multijunction solar cell integration onto Si substrate. The current state-of-the-art for III–V-on-Si solar cells along with their theoretical performance projections is presented. Next, the key design criteria and the technical challenges associated with the integration of III–V multijunction solar cells on Si are reviewed. Different technological routes for integrating III–V solar cells on Si substrate through heteroepitaxial integration and via mechanical stacking approach are presented. The key merits and technical challenges for all of the till-date available technologies are summarized. Finally, the prospects, opportunities and future outlook toward further advancing the performance of III–V-on-Si multijunction solar cells are discussed. With the plummeting price of Si solar cells accompanied with the tremendous headroom available for improving the III–V solar cell efficiencies, the future prospects for successful integration of III–V solar cell technology onto Si substrate look very promising to unlock an era of next generation of high-efficiency and low-cost photovoltaics.

Sign in / Sign up

Export Citation Format

Share Document