Study on Engineering Mechanical Properties of Mayanpo Slope at Xiangjiaba Hydropower Station

2012 ◽  
Vol 548 ◽  
pp. 511-515
Author(s):  
Jian Hui Sun ◽  
Long Jiang ◽  
Wan Shun Wang ◽  
Chen Lin Xiong ◽  
Zhao Hui Zhu
Keyword(s):  
Mechanical Properties ◽  
Field Test ◽  
Dynamic Equilibrium ◽  
Three Dimensional ◽  
Strength Reduction ◽  
Hydropower Station ◽  
Weak Interlayer ◽  
Internal Deformation ◽  
Three Stages ◽  
Changing Rate

Through the field test of Mayanpo slope at Xiangjiaba Hydropower Station, external deformation, deep deformation, groundwater level and stability of the slope with weak interlayer are analyzed in this paper. The results show that: ① displacement deformation increases with time and decreases with increasing depth. Changes of displacement can be divided into three stages: deformation rapidly increases in the early, and slowly increases in the medium, and becomes gradually stable in the later. Changing rate of displacement decreases with time, and the rate can also be divided into three stages, basically consistent with the displacement changing stage; ② a certain thickness of weak interlayer and evident dislocation exists in slope strata. Dislocation rate first increases and then decreases until basically stable, and local fluctuation is mainly affected by rainfall and dynamic equilibrium adjustment of the slope internal deformation; ③based on the penalty function contact of pile soil and the surface of rock mass, the three-dimensional numerical model of coupling of seepage and strain has been established, and through analyzing and comparing with field test data, it is verified that the model is feasible in the study on slope deformation; ④ through stability analysis of Mayanpo slope by strength reduction FEM, stability coefficient is 1.72.

Study on Deformation and Stability of High Slope with Weak Intercalated Layers

2012 ◽  
Vol 204-208 ◽  
pp. 3142-3145
Author(s):  
Long Jiang ◽  
Jian Hui Sun ◽  
Wan Shun Wang
Keyword(s):  
Stability Analysis ◽  
Dynamic Equilibrium ◽  
Strength Reduction ◽  
Displacement Rate ◽  
Hydropower Station ◽  
High Slope ◽  
Stability Coefficient ◽  
Local Fluctuations ◽  
Stability Of Slope ◽  
Internal Deformation

The paper analyzed external deformation, deep deformation and stability of slope with weak intercalated layers in detail through field monitoring of Mayanpo slope at Xiangjiaba Hydropower Station. The results show that: ① Displacement deformation increases with time and decreases with increasing depth, and displacement rate decreases with time. ② Dislocation position exists in weak intercalated layers. Dislocation rate first increases and then decreases until basically stable, and local fluctuations are mainly affected by rainfall and dynamic equilibrium adjustment of the slope internal deformation. ③ Through stability analysis of Mayanpo slope by strength reduction FEM, stability coefficient is 1.72.

Biotemplated facile synthesis of three‐dimensional micro/nanoporous tin oxide: improving the flammable and mechanical properties of flexible PVC

2019 ◽  
Vol 14 (8) ◽  
pp. 828-830 ◽  
Author(s):  
Weihua Meng ◽  
Weihong Wu ◽  
Weiwei Zhang ◽  
Luyao Cheng ◽  
Yunhong Jiao ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tin Oxide ◽  
Three Dimensional ◽  
Facile Synthesis

scholarly journals Is Dialdehyde Chitosan a Good Substance to Modify Physicochemical Properties of Biopolymeric Materials?

2021 ◽  
Vol 22 (7) ◽  
pp. 3391
Author(s):  
Sylwia Grabska-Zielińska ◽  
Alina Sionkowska ◽  
Ewa Olewnik-Kruszkowska ◽  
Katarzyna Reczyńska ◽  
Elżbieta Pamuła
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Physicochemical Properties ◽  
Silk Fibroin ◽  
Three Dimensional ◽  
Microscopy Imaging ◽  
Maximum Deformation ◽  
One Step ◽  
Chitosan Blends ◽  
Fourier Transfer Infrared Spectroscopy

The aim of this work was to compare physicochemical properties of three dimensional scaffolds based on silk fibroin, collagen and chitosan blends, cross-linked with dialdehyde starch (DAS) and dialdehyde chitosan (DAC). DAS was commercially available, while DAC was obtained by one-step synthesis. Structure and physicochemical properties of the materials were characterized using Fourier transfer infrared spectroscopy with attenuated total reflectance device (FTIR-ATR), swelling behavior and water content measurements, porosity and density observations, scanning electron microscopy imaging (SEM), mechanical properties evaluation and thermogravimetric analysis. Metabolic activity with AlamarBlue assay and live/dead fluorescence staining were performed to evaluate the cytocompatibility of the obtained materials with MG-63 osteoblast-like cells. The results showed that the properties of the scaffolds based on silk fibroin, collagen and chitosan can be modified by chemical cross-linking with DAS and DAC. It was found that DAS and DAC have different influence on the properties of biopolymeric scaffolds. Materials cross-linked with DAS were characterized by higher swelling ability (~4000% for DAS cross-linked materials; ~2500% for DAC cross-linked materials), they had lower density (Coll/CTS/30SF scaffold cross-linked with DAS: 21.8 ± 2.4 g/cm3; cross-linked with DAC: 14.6 ± 0.7 g/cm3) and lower mechanical properties (maximum deformation for DAC cross-linked scaffolds was about 69%; for DAS cross-linked scaffolds it was in the range of 12.67 ± 1.51% and 19.83 ± 1.30%) in comparison to materials cross-linked with DAC. Additionally, scaffolds cross-linked with DAS exhibited higher biocompatibility than those cross-linked with DAC. However, the obtained results showed that both types of scaffolds can provide the support required in regenerative medicine and tissue engineering. The scaffolds presented in the present work can be potentially used in bone tissue engineering to facilitate healing of small bone defects.

scholarly journals 3D Printing of High Viscosity Reinforced Silicone Elastomers

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2239
Author(s):  
Nicholas Rodriguez ◽  
Samantha Ruelas ◽  
Jean-Baptiste Forien ◽  
Nikola Dudukovic ◽  
Josh DeOtte ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
New Technologies ◽  
Three Dimensional ◽  
High Viscosity ◽  
Layer By Layer ◽  
Silicone Elastomers ◽  
Uv Curable ◽  
Octet Truss ◽  
Tunable Mechanical Properties

Recent advances in additive manufacturing, specifically direct ink writing (DIW) and ink-jetting, have enabled the production of elastomeric silicone parts with deterministic control over the structure, shape, and mechanical properties. These new technologies offer rapid prototyping advantages and find applications in various fields, including biomedical devices, prosthetics, metamaterials, and soft robotics. Stereolithography (SLA) is a complementary approach with the ability to print with finer features and potentially higher throughput. However, all high-performance silicone elastomers are composites of polysiloxane networks reinforced with particulate filler, and consequently, silicone resins tend to have high viscosities (gel- or paste-like), which complicates or completely inhibits the layer-by-layer recoating process central to most SLA technologies. Herein, the design and build of a digital light projection SLA printer suitable for handling high-viscosity resins is demonstrated. Further, a series of UV-curable silicone resins with thiol-ene crosslinking and reinforced by a combination of fumed silica and MQ resins are also described. The resulting silicone elastomers are shown to have tunable mechanical properties, with 100–350% elongation and ultimate tensile strength from 1 to 2.5 MPa. Three-dimensional printed features of 0.4 mm were achieved, and complexity is demonstrated by octet-truss lattices that display negative stiffness.

scholarly journals Conductive GelMA–Collagen–AgNW Blended Hydrogel for Smart Actuator

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1217
Author(s):  
Jang Ho Ha ◽  
Jae Hyun Lim ◽  
Ji Woon Kim ◽  
Hyeon-Yeol Cho ◽  
Seok Geun Jo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Umbilical Vein ◽  
Three Dimensional ◽  
Silver Nanowire ◽  
Structural Deformation ◽  
Rheological Analysis ◽  
Sem Image ◽  
Smart Actuator ◽  
Umbilical Vein Endothelial Cells ◽  
Electrical Stimuli

Blended hydrogels play an important role in enhancing the properties (e.g., mechanical properties and conductivity) of hydrogels. In this study, we generated a conductive blended hydrogel, which was achieved by mixing gelatin methacrylate (GelMA) with collagen, and silver nanowire (AgNW). The ratio of GelMA, collagen and AgNW was optimized and was subsequently gelated by ultraviolet light (UV) and heat. The scanning electron microscope (SEM) image of the conductive blended hydrogels showed that collagen and AgNW were present in the GelMA hydrogel. Additionally, rheological analysis indicated that the mechanical properties of the conductive GelMA–collagen–AgNW blended hydrogels improved. Biocompatibility analysis confirmed that the human umbilical vein endothelial cells (HUVECs) encapsulated within the three-dimensional (3D), conductive blended hydrogels were highly viable. Furthermore, we confirmed that the molecule in the conductive blended hydrogel was released by electrical stimuli-mediated structural deformation. Therefore, this conductive GelMA–collagen–AgNW blended hydrogel could be potentially used as a smart actuator for drug delivery applications.

scholarly journals An Overview on the Rheology, Mechanical Properties, Durability, 3D Printing, and Microstructural Performance of Nanomaterials in Cementitious Composites

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2950
Author(s):  
Hongwei Song ◽  
Xinle Li
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Three Dimensional ◽  
Cementitious Materials ◽  
Research Area ◽  
Cementitious Composites ◽  
Split Tensile Strength ◽  
Contour Crafting ◽  
Wide Range ◽  
Active Research

The most active research area is nanotechnology in cementitious composites, which has a wide range of applications and has achieved popularity over the last three decades. Nanoparticles (NPs) have emerged as possible materials to be used in the field of civil engineering. Previous research has concentrated on evaluating the effect of different NPs in cementitious materials to alter material characteristics. In order to provide a broad understanding of how nanomaterials (NMs) can be used, this paper critically evaluates previous research on the influence of rheology, mechanical properties, durability, 3D printing, and microstructural performance on cementitious materials. The flow properties of fresh cementitious composites can be measured using rheology and slump. Mechanical properties such as compressive, flexural, and split tensile strength reveal hardened properties. The necessary tests for determining a NM’s durability in concrete are shrinkage, pore structure and porosity, and permeability. The advent of modern 3D printing technologies is suitable for structural printing, such as contour crafting and binder jetting. Three-dimensional (3D) printing has opened up new avenues for the building and construction industry to become more digital. Regardless of the material science, a range of problems must be tackled, including developing smart cementitious composites suitable for 3D structural printing. According to the scanning electron microscopy results, the addition of NMs to cementitious materials results in a denser and improved microstructure with more hydration products. This paper provides valuable information and details about the rheology, mechanical properties, durability, 3D printing, and microstructural performance of cementitious materials with NMs and encourages further research.

Sign in / Sign up

Export Citation Format

Share Document