Preparation of Water-Soluble Carboxymethylated Lignin from Wheat Straw Alkali Lignin

2012 ◽  
Vol 550-553 ◽  
pp. 1293-1298 ◽  
Author(s):  
Lin Huo Gan ◽  
Ming Song Zhou ◽  
Xue Qing Qiu
Keyword(s):  
Wheat Straw ◽  
Acid Concentration ◽  
1H Nmr Spectroscopy ◽  
Water Soluble ◽  
Monochloroacetic Acid ◽  
Hydroxyl Group ◽  
Carboxyl Group ◽  
Optimum Conditions ◽  
Alkali Lignin ◽  
Carboxyl Group Content

Water-soluble carboxymethylated lignin (CML) was synthesized using wheat straw alkali lignin (WAL) in aqueous medium. The process of carboxymethylation was optimized with respect to the NaOH concentration, monochloroacetic acid concentration, reaction temperature and time. The optimized product has a yield of 80.47% and a carboxyl group content of 2.8231 mmol•g-1, respectively. The optimum conditions for carboxymethylation are NaOH concentration of 20.0% (wt%), monochloroacetic acid concentration of 37.5% (wt%), temperature of 70 °C and time of 90 min. The optimized CML was characterized by FTIR spectroscopy, 1H NMR spectroscopy and interfacial tension apparatus. The result shows that the substitution reaction of carboxymethylation occurs simultaneously in the phenolic hydroxyl group and aliphatic hydroxyl group in WAL. CML has the surface activity in water for industrial application as dispersant.

Simultaneous Spectrophotometric Determination of Salbutamol by Coupling with Diazotized 4-Aminobenzoic acid

2017 ◽  
Vol 8 (1) ◽  
Author(s):  
Hind Hadi ◽  
Gufran Salim
Keyword(s):  
Pharmaceutical Preparations ◽  
Coupling Reaction ◽  
Dosage Forms ◽  
Water Soluble ◽  
Trace Determination ◽  
Aminobenzoic Acid ◽  
Optimum Conditions ◽  
Colored Product ◽  
Versus Concentration

A simple, rapid and sensitive spectrophotmetric method for trace determination of salbutamol (SAL) in aqueous solution and in pharmaceutical preparations is described. The method is based on the diazotization coupling reaction of the intended compound with 4-amino benzoic acid (ABA) in alkaline medium to form an intense orange, water soluble dye that is stable and shows maximum absorption at 410 nm. A graph of absorbance versus concentration indicates that Beer’s law is obeyed over the concentration range of 0.5-30 ppm, with a molar absorbtivity 3.76×104 L.mol-1 .cm-1 depending on the concentration of SAL. The optimum conditions and stability of the colored product have been investigated and the method was applied successfully to the determination of SAL in dosage forms.

scholarly journals The Combined Effects of Magnesium Oxide and Inulin on Intestinal Microbiota and Cecal Short-Chain Fatty Acids

Nutrients ◽  
2021 ◽  
Vol 13 (1) ◽  
pp. 152
Author(s):  
Kanako Omori ◽  
Hiroki Miyakawa ◽  
Aya Watanabe ◽  
Yuki Nakayama ◽  
Yijin Lyu ◽  
...  
Keyword(s):  
Fatty Acids ◽  
Acetic Acid ◽  
Dietary Fiber ◽  
Magnesium Oxide ◽  
Acid Concentration ◽  
Short Chain Fatty Acids ◽  
Water Soluble ◽  
Short Chain ◽  
Acetic Acid Concentration ◽  
Chain Fatty Acids

Constipation is a common condition that occurs in many people worldwide. While magnesium oxide (MgO) is often used as the first-line drug for chronic constipation in Japan, dietary fiber intake is also recommended. Dietary fiber is fermented by microbiota to produce short-chain fatty acids (SCFAs). SCFAs are involved in regulating systemic physiological functions and circadian rhythm. We examined the effect of combining MgO and the water-soluble dietary fiber, inulin, on cecal SCFA concentration and microbiota in mice. We also examined the MgO administration timing effect on cecal SCFAs. The cecal SCFA concentrations were measured by gas chromatography, and the microbiota was determined using next-generation sequencing. Inulin intake decreased cecal pH and increased cecal SCFA concentrations while combining MgO increased the cecal pH lowered by inulin and decreased the cecal SCFA concentrations elevated by inulin. When inulin and MgO were combined, significant changes in the microbiota composition were observed compared with inulin alone. The MgO effect on the cecal acetic acid concentration was less when administered at ZT12 than at ZT0. In conclusion, this study suggests that MgO affects cecal SCFA and microbiota during inulin feeding, and the effect on acetic acid concentration is time-dependent.

scholarly journals Potassium hydroxide pulping of four non-woods

2018 ◽  
Vol 53 (1) ◽  
pp. 1-6 ◽  
Author(s):  
S Sutradhar ◽  
M Sarkar ◽  
J Nayeem ◽  
M Sarwar Jahan ◽  
C Tian
Keyword(s):  
Wheat Straw ◽  
Potassium Hydroxide ◽  
Raw Materials ◽  
Kappa Number ◽  
Pulp Yield ◽  
Optimum Conditions ◽  
Corchorus Capsularis ◽  
Sesbania Bispinosa ◽  
Soda Pulping ◽  
Good Substitute

Four non-woods such as, dhaincha (Sesbania bispinosa), jute stick (Corchorus capsularis), wheat straw (Triticum aestivum) and corn stalks (Zea mays) were cooked by potassium hydroxide (KOH) at the optimum conditions of soda pulping. Dhaincha, wheat straw and corn stalks were delignified to kappa number 19.4, 13.6 and 19, respectively, while jute stick was not delignified sufficiently (kappa number 32.5). All these four raw materials maintained good yield in KOH process. Dhaincha produced the highest pulp yield (50.5%) and wheat straw had the lowest pulp yield (44.7). All pulps were bleached by D0EpD1 bleaching sequences in identical bleaching conditions. Final pulp brightness reached to above 80% ISO except jute stick pulp. Jute stick pulp reached to 74.9% brightness only after the consumption of 30 kg ClO2/ ton of pulp. The overall bleaching yields were 92.6%, 88.4%, 90.1 and 90.8% for dhaincha, jute stick, wheat straw and corn stalks pulps, respectively. The oSR of these four non-wood bleached pulps was above 20, consequently improved papermaking in the unrefined state. Beating rapidly increased papermaking properties, as for example, the tensile index of dhaincha pulps increased from 49 N.m/g in the unrefined pulp to 90 N.m/g in the beaten 50 oSR. It can be seen that KOH is a good substitute to soda process for non-wood.Bangladesh J. Sci. Ind. Res.53(1), 1-6, 2018

Lignocellulose degradation by Fusarium species

1983 ◽  
Vol 61 (4) ◽  
pp. 1194-1198 ◽  
Author(s):  
John B. Sutherland ◽  
Anthony L. Pometto III ◽  
Don L. Crawford
Keyword(s):  
Wheat Straw ◽  
Degradation Products ◽  
Fusarium Species ◽  
Water Soluble ◽  
Lignocellulose Degradation ◽  
Blue Spruce ◽  
Picea Pungens ◽  
Weight Losses ◽  
Aromatic Degradation ◽  
Different Strains

Eighteen strains of fungi in the genus Fusarium, including varieties of F. episphaeria, F. lateritium, F. moniliforme, F. nivale, F. oxysporum, F. rigidiusculum, F. roseum, F. solani, and F. tricinctum, slowly degraded lignocelluloses from blue spruce (Picea pungens) and wheat (Triticum aestivum). When grown with [lignin-14C]lignocellulose from blue spruce, 15 of the Fusarium strains converted 2.2 to 4.3% of the [14C]lignin in 60 days to 14CO2 and 3.9 to 8.4% to labeled water-soluble products. When grown with unlabeled lignocellulose from wheat straw, the strains caused total weight losses in 60 days of 7 to 25%, acid-insoluble (Klason) lignin losses of 2 to 17%, and carbohydrate losses of 3 to 33%. Crude protein contents of degraded wheat-straw lignocellulose samples were 3.2 to 5.1%. Among the aromatic degradation products from wheat-straw lignocellulose degraded by different strains, as shown by gas chromatography, were p-coumaric acid, vanillic acid, vanillin, syringaldehyde, and p-hydroxybenzaldehyde.

Development of novel pH-sensitive azo dyes from Cardanol as a bioresource

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Siddhesh Umesh Mestry ◽  
Umesh Ratan Mahajan ◽  
Aswathy M. ◽  
Shashank T. Mhaske
Keyword(s):  
Azo Dyes ◽  
Azo Dye ◽  
Density Functional ◽  
Ph Sensitivity ◽  
Water Soluble ◽  
Hydroxyl Group ◽  
Disulfonic Acid ◽  
Colour Properties ◽  
Content Type ◽  
Good Thermal Stability

Purpose The purpose of this paper is to use the bio-based resource as the starting material for the synthesis of azo dye. Cardanol is one of the most used bio-based resources for carrying out the synthesis of various compounds having numerous end applications. The study presents an attempt to develop an azo dye from Cardanol having end applications in pH-responsive dyes. Design/methodology/approach The cardanol was sulfonated to block the para position by which ortho positioned hydroxyl group after diazotization and coupling will provide necessary pH-sensitivity. The diazotization of two naphthalene derivatives, i.e. 1-naphthol-8-amino-3,6-disulfonic acid (H-acid) and 7-amino-4-hydroxy-2-naphthalene sulfonic acid (J-acid) was carried out using the standard practice, and the diazotized compounds were coupled with the sulfonated cardanol. The obtained dyes were characterized by Fourier transform infrared, nuclear magnetic resonance, carbon-hydrogen-nitrogen-sulfur analysis and hydroxyl value. The colour properties were checked using UV-vis spectrophotometry and density functional theory, while thermogravimetric analysis was used for the thermal degradation studies of both the dyes. Findings Water-soluble cardanol-based azo dyes were prepared successfully having good thermal stability, and the obtained results are being presented in this paper. Originality/value The originality lies between the use of cardanol as a bio-based resource for the synthesis of azo-dye and the obtained azo-dye has the pH-sensitivity.

scholarly journals Selective chelating precipitation of palladium metal from electroplating wastewater using chitosan and its derivative

2020 ◽  
Vol 38 (3-4) ◽  
pp. 113-126
Author(s):  
Qiaoling Xie ◽  
Gaojie Liang ◽  
Tao Lin ◽  
Fuming Chen ◽  
Dandan Wang ◽  
...  
Keyword(s):  
Fourier Transform ◽  
Photoelectron Spectroscopy ◽  
Water Soluble ◽  
Optimum Conditions ◽  
Chitosan Derivative ◽  
Aqua Regia ◽  
Electroplating Wastewater ◽  
X Ray ◽  
Approach Method ◽  
Palladium Metal

A study on selective chelating precipitation of palladium metal from real electroplating wastewater using chitosan and its water-soluble derivative was conducted. The pH parameter, the concentrations of chitosan and its water-soluble derivative and the chelating precipitation time were experimentally investigated, and the optimum conditions were determined. The results revealed that both chitosan and its water-soluble derivative acted as chelating precipitation agents. Rapid chelating precipitation occurred when chitosan was added to real electroplating wastewater containing the chitosan derivative, thereby improving removal efficiency of palladium in different forms up to 95% under the optimum condition of 0.2 g/L chitosan and 0.16 mg/L derivative at pH 2.5. Then, dissolution experiments showed that chelating precipitation products could be dissolved in aqua regia. Additionally, selective chelating precipitation of palladium by chitosan and its derivative was characterized using X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. Thus, it can be concluded that the combined utilization of chitosan and its water-soluble derivative is a promising approach method for the removal of different forms of palladium from real electroplating wastewater.

scholarly journals Prosopis juliflora pods mash for biofuel energy production: Implication for managing invasive species through utilization

2018 ◽  
Vol 7 (3) ◽  
pp. 205-212
Author(s):  
Mebrahtu Haile ◽  
Hadgu Hishe ◽  
Desta Gebremedhin
Keyword(s):  
Invasive Species ◽  
Ethanol Production ◽  
Solid Waste ◽  
Acid Concentration ◽  
Solid Fuel ◽  
Energy Production ◽  
Prosopis Juliflora ◽  
Optimum Conditions ◽  
H2so4 Concentration ◽  
Fermentation Temperature

Fuels obtained from renewable resources have merited a lot of enthusiasm amid the previous decades mostly because of worries about fossil fuel depletion and climate change. The aim of this study was to investigate the potential of Prosopis juliflora pods mash for bio-ethanol production and its hydrolysis solid waste for solid fuel. Parameters such as acid concentration (0.5 - 3 molar), hydrolysis times (5-30 min), fermentation times (6-72h), fermentation temperature (25 OC - 40 OC) and pH (4-8) on bio-ethanol production using Saccharomyces cerevisiae yeast were evaluated. Results show that the content of sugar increases as the acid concentration (H2SO4) increased up to 1 molar and decreases beyond 1 molar.  A maximum sugar content of 96.13 %v/v was obtained at 1 molar of H2SO4 concentration. The optimum conditions for bio-ethanol production were found at 1 molar of H2SO4 concentration (4.2 %v/v), 48 h fermentation time (5.1%v/v), 20 min hydrolysis time (5.57 %v/v), 30 OC fermentation temperature (5.57 %v/v) and pH 5 (6.01 %v/v). Under these optimum conditions, the maximum yield of bio-ethanol (6.01%v/v) was obtained. Furthermore, the solid waste remaining after bio-ethanol production was evaluated for solid fuel application (18.22 MJ/kg). Hence, the results show that Prosopis juliflora pods mash has the potential to produce bio-ethanol. The preliminary analysis of solid waste after hydrolysis suggests the possibility to use it as a solid fuel, implying its potential for alleviating major disposal problems.Article History: Received March 24th 2018 ; Received in revised form September 15th 2018; Accepted October 1st 2018; Available onlineHow to Cite This Article: Haile, M., Hishe, H. and Gebremedhin, D. (2018) Prosopis juliflora Pods Mash for Biofuel Energy Production: Implication for Managing Invasive Species through Utilization. International Journal of Renewable Energy Development, 7(3), 205-212.https://doi.org/10.14710/ijred.7.3.205-212 

Sign in / Sign up

Export Citation Format

Share Document