The Research Progress of High Efficiency Energy-Saving Grinding Equipment

2012 ◽  
Vol 616-618 ◽  
pp. 1944-1951
Author(s):  
Fu Kun Yan ◽  
Qing Fei Xiao
Keyword(s):  
Energy Saving ◽  
High Efficiency ◽  
Dynamic Pressure ◽  
Development Trend ◽  
Research Progress ◽  
New Device ◽  
Transmission Part ◽  
Saving Mode ◽  
The Development Trend ◽  
Lining Plate

This paper explains some deficiencies of grinding equipment in our country at present,introduces the angular screw lining plate and trench lining plate from mill lining plate ,also their application effects; and introduces the static and dynamic pressure bearing and the center drive energy-saving mode from the transmission part, on the basis of which take a brief introduction of a new device and its application status, then the development trend in the future is prospected.

scholarly journals Review and Development Trend of Digital Hydraulic Technology

2020 ◽  
Vol 10 (2) ◽  
pp. 579
Author(s):  
Qiwei Zhang ◽  
Xiangdong Kong ◽  
Bin Yu ◽  
Kaixian Ba ◽  
Zhengguo Jin ◽  
...  
Keyword(s):  
Energy Saving ◽  
Developmental Process ◽  
Development Trend ◽  
Research Status ◽  
Uniform Definition ◽  
Definition Of ◽  
The Development Trend ◽  
Exact Definition

Since the emergence of digital hydraulic technology, it has achieved good results in intelligence, integration, energy saving, etc. After decades of development, and it has also attracted wide attention in the industry. However, for many years, the definition of digital hydraulic technology has differed between researchers, and there is no uniform definition. Such a situation affects the development of it to a certain extent. Therefore, this paper gives the exact definition of digital hydraulic technology based on a large number of researches on it. At the same time, the paper analyzes the research status and developmental process of the such a technology, and we forecast the development trend of it.

scholarly journals Application of enzyme engineering in pharmacy

2020 ◽  
Vol 9 (2) ◽  
Author(s):  
Qiaole Li ◽  
Yanhong Li ◽  
Haoran Niu
Keyword(s):  
High Efficiency ◽  
Development Trend ◽  
Enzyme Engineering ◽  
Reaction Conditions ◽  
Important Method ◽  
Reaction Specificity ◽  
Prevention And Treatment ◽  
Modern Biotechnology ◽  
Catalytic Functions ◽  
The Development Trend

Enzyme engineering is an important part of modern biotechnology. Due to its high reaction specificity, high efficiency, mild reaction conditions, and low pollution, it is also an important method widely used in the pharmaceutical field. The application of enzymes in medicine is diverse, such as: diagnosis, prevention and treatment of diseases with enzymes, manufacture of various drugs with enzymes, etc., mainly through manual operations, to obtain enzymes required by the pharmaceutical industry, and through various means Enzymes perform their catalytic functions. This article mainly introduces the application of enzyme engineering in the pharmaceutical field, and also prospects the development trend of enzyme engineering in the pharmaceutical field.

scholarly journals Research progress of analysis method of slope stability combined with hot spots

2020 ◽  
Vol 198 ◽  
pp. 02008
Author(s):  
XIE Qiao ◽  
ZHANG Jia-sheng ◽  
Wang Xuan
Keyword(s):  
Slope Stability ◽  
Hot Spots ◽  
Development Trend ◽  
Research Progress ◽  
Analysis Methods ◽  
Scope Of Application ◽  
The Times ◽  
The Development Trend ◽  
Selection Of

The analysis methods and theories of slope stability are constantly improving and developing, and more methods in line with the development characteristics of the times have been put forward by scholars at home and abroad. Combined with the latest research hot spots in the direction of analysis methods of slope stability in the world, the analysis methods of slope stability are systematically classified and summarized; The principles, characteristics, scope of application of various methods are summarized; The development trend of slope stability analysis is comprehensively analyzed from various aspects. It provides the follow-up scholars with the research of new methods. It can provide reference for the selection of evaluation methods of practical slope engineering stability.

Research Progress of Bionic Water Strider Robot

2021 ◽  
Vol 14 ◽  
Author(s):  
Jingang Jiang ◽  
Qiyun Tan ◽  
Xiaoyang Yu ◽  
Dianhao Wu ◽  
Liang Yao
Keyword(s):  
Water Surface ◽  
Visual Analysis ◽  
Development Trend ◽  
Research Progress ◽  
Future Research ◽  
Water Strider ◽  
Quality Of Water ◽  
The Development Trend ◽  
Development Prospects

Background: As a kind of bionic robot, the bionic water strider robot can achieve sliding, jumping and other movements on the water surface, with advantages of small size, light weight, flexible movements and other characteristics. It can detect the quality of water, investigate and search the water surface and perform some other operations. It has a very broad range of applications and development prospects. Therefore, the trend of biomimetic water strider robot is catching more and more attention. Objective: To provide an overview of the bionic water strider robot and introduce their classification, characteristics and development. Methods: This paper reviews various productions and patents related to the bionic water strider robot from 2003 to the present. The sources of the papers include: CNKI, Wanfang, Patent publication announcement in China, Web of Science, IEEE, Elsevier, Springer-Verlag, Espacenet, FPO IP Research amp; Communities. To obtain the results, endnote is used for documentation and citesapce was used for visual analysis. Results: The mechanical structure of existing bionic water strider robots is analyzed and compared. The typical characteristics are concluded. The main problems in its development are analyzed and the development trend is foreseen. The current and future research of the productions and patents on the bionic water strider robot are discussed. Conclusion: The optimization and development of the structure of the bionic water strider robot and the development of associated components help to improve the simulation of the water strider's motion and to perform better on task in a complex water surface environment. In the future, with the deepening and improvement of the research, the bionic water strider robot will develop towards miniaturization, intelligence and integration.

Research Progress of Sintered Wall Material Products Synchronous Cutting Machine

2014 ◽  
Vol 989-994 ◽  
pp. 710-714
Author(s):  
Hong Mei Liu ◽  
Cheng Qun Wu ◽  
Xin Zhang ◽  
Yuan Bin Xu
Keyword(s):  
Performance Analysis ◽  
Present Situation ◽  
Development Trend ◽  
Research Progress ◽  
Wall Material ◽  
Molding Process ◽  
Technical Parameters ◽  
Cutting Machine ◽  
Forming Characteristics ◽  
The Development Trend

By means of raw performance analysis of silt sintered porous brick, the importance of synchronous cutting machine in the molding process was revealed. On basis of the analysis of the present situation of research and application of synchronous cutting machine at home and abroad, according to the forming characteristics of silt sintered porous brick, technical parameters of synchronous cutting machine was explained and the development trend of the synchronous cutting machine was expected.

Energy Saving Methods by Using Ground Source Heat Pump in Buildings

2012 ◽  
Vol 608-609 ◽  
pp. 1281-1284
Author(s):  
Jian Tao Liu ◽  
Jian Xing Ren ◽  
Xiao Cheng Ma ◽  
Kun Kun You ◽  
Fang Qin Li ◽  
...  
Keyword(s):  
Energy Saving ◽  
Heat Pump ◽  
Development Trend ◽  
Ground Source Heat Pump ◽  
Low Carbon ◽  
Ground Source ◽  
The Development Trend ◽  
Society Research

This paper analyzes the low-carbon society research background of ground source heat pump (GSHP) and presents the principles of GSHP system. It describes two kinds applications of GSHP system, and reveals the development trend of the GSHP system.

Status and Development Trend of Energy-Saving Wall Materials in Cold Areas

2010 ◽  
Vol 150-151 ◽  
pp. 630-633 ◽  
Author(s):  
Chun Lv
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Building Energy ◽  
Development Trend ◽  
Construction Technology ◽  
New Energy ◽  
Composite Wall ◽  
Wall Materials ◽  
Insulation Wall ◽  
The Development Trend

The primary factor in reducing building energy consumption is the wall energy, but thickening the walls simply and using traditional materials to reduce energy consumption has become unable to satisfy the development trend at the present stage. Energy-saving wall materials include organic wall insulation, inorganic wall insulation and composite wall insulation. According to the construction technology, insulation wall can be divided into internal insulation wall, sandwich insulation wall and external insulation wall etc.. Polyurethane foam and other new energy-saving materials are widely used, whicth will become the main energy-saving materials in the northern cold areas.

Research Progress for Determination of the Antioxidant Content in Transformer Oil

2014 ◽  
Vol 543-547 ◽  
pp. 1157-1160 ◽  
Author(s):  
Chen Yao Liu ◽  
Na Na Wang ◽  
Yun Guang Huang ◽  
Wei Wei Yu ◽  
Li Ping Zhu ◽  
...  
Keyword(s):  
Oxidation Process ◽  
Oxidation Stability ◽  
Development Trend ◽  
Electric Arc ◽  
Transformer Oil ◽  
Research Progress ◽  
Oil Oxidation ◽  
Electrochemical Test ◽  
The Development Trend

Under the actions of dissolved oxygen, temperature, electric field, electric arc, moisture, impurities and metal catalysts, transformer oil in operation will undergo oxidation and cracking, which may result in production of large quantities of peroxides, alcohols, aldehydes, ketones and acids. To improve the oxidation stability of oil, the antioxidants should be added into the transformer oil before operation. This paper mainly introduced the oxidation process of transformer oil, the harm of transformer oil oxidation and the method for the determination of the T501 antioxidants content in transformer oil. It also forecast the development trend of the electrochemical test in the determination of T501 antioxidants content.

scholarly journals Research progress of wearable electric heating elements

2021 ◽  
pp. 117-117
Author(s):  
Shuo Gao ◽  
Runjun Sun ◽  
Yan Feng ◽  
Jingxian Hao
Keyword(s):  
Performance Evaluation ◽  
Thermal Performance ◽  
Electric Heating ◽  
Development Trend ◽  
Heating Element ◽  
Research Progress ◽  
Element Type ◽  
The Development Trend ◽  
Electric Heating Element

The research progress of electric heating elements is summarized in terms of heating element type and thermal performance evaluation. Their shortcomings are summarized, and the development trend is pointed out to provide help and direction guidance for the research of electric heating element.

The Research Progress of Intra-Row Mechanical Weeding Technology of Dry-Land

2015 ◽  
Vol 729 ◽  
pp. 187-191 ◽  
Author(s):  
Hong Chang Wang ◽  
Jin Tong
Keyword(s):  
Hot Spot ◽  
Development Trend ◽  
Developed Countries ◽  
Good Alternative ◽  
Advanced Technology ◽  
Research Progress ◽  
Technology Research ◽  
Dry Land ◽  
Research Institutes ◽  
The Development Trend

The farmland weeds directly affect the crops yields, and the intra-row weeds are more difficult to eliminate than inter-row weeds. With the harm of chemical weeding technology cognition by people, the growth of awareness of environmental protection consciousness and food safety, the non-chemical weeding technology get more and more attention. Mechanical weeding as a good alternative method get more attention, and the intra-row intelligent mechanical weeding technology becomes a hot spot of research. The research on intra-row intelligent mechanical weeding technology of China have a large gap compared with developed countries. In this work, the current research of intra-row mechanical weeding technology of developed countries and China was reviewed, and the development trend of intra-row intelligent mechanical weeding technology of China were prospected. The universities and research institutes should be encouraged to learn from foreign advanced technology and the design concept of intelligent weeding equipment, increase the investment in intelligent mechanical weeding technology research and promotion.

Sign in / Sign up

Export Citation Format

Share Document