Experimental Research on the Mineral Processing of a Certain Refractory Limonite Ore in Xinjiang

2013 ◽  
Vol 641-642 ◽  
pp. 60-64
Author(s):  
Qing Mei Jia ◽  
Feng Jiu Li ◽  
Ying Li
Keyword(s):  
Magnetic Separation ◽  
Technological Process ◽  
Experimental Research ◽  
Mineral Processing ◽  
Closed Circuit ◽  
Reverse Flotation ◽  
One Stage ◽  
Result Show

According to the ore nature of limonite in Xinjiang，use the technological process of one stage selectrifine high magnetic separation—reverse flotation to the limonite. the result show that at the fineness ore of -200order 60.0%, employ the closed-circuit process ,Limonite concentrates aining above 52.24％ Fe could be obtained at a productive rate of 54.04％ and a recovery of Fe about 67.03％ losed circuit tests, and the numble of finally tailing is 47.76%,29.08%and 32.97%.

Experimental Research on Beneficiation Process for a Specularite Ore

2011 ◽  
Vol 304 ◽  
pp. 387-390 ◽  
Author(s):  
Wei Zhi Wang ◽  
Jin Rui Zhang ◽  
Chun Guang Yang
Keyword(s):  
Magnetic Separation ◽  
Experimental Research ◽  
High Intensity ◽  
Iron Ore ◽  
Separation Process ◽  
Gravity Separation ◽  
Clay Material ◽  
Reverse Flotation ◽  
Test Results ◽  
Iron Concentrate

An iron ore contains specularite and hematite which are its main iron minerals. And its main gangue minerals are specularite, part of the clay material and a small amount of quartz.Tests are made on the ore by adopting processes including gravity separation, high intensity magnetic separation, high intensity magnetic-gravity separation and high intensity magnetic - reverse flotation. The test results show that the separation process of high intensity magnetic-reverse flotation can obtain an iron concentrate grading about 66.62% at a recovery of 58.38％ from an iron ore assaying around 35.00% iron, rather good metallurgical performances.

Research on Flotation Tests of Sulfide Copper Ore from Yunan

2013 ◽  
Vol 634-638 ◽  
pp. 3466-3471 ◽  
Author(s):  
Yi Jie Wang ◽  
Shu Ming Wen ◽  
Jian Liu ◽  
Qi Cheng Feng ◽  
Meng Yang Lv
Keyword(s):  
Mineral Processing ◽  
Copper Recovery ◽  
Closed Circuit ◽  
Iron Deposit ◽  
Flow Sheet ◽  
Optimum Conditions ◽  
Butyl Xanthate ◽  
Copper Ore ◽  
One Stage ◽  
Concentrate Grade

The mineral processing flow sheet and reagent system of flotation copper minerals from a large copper-iron deposit in Yunnan were fully investigated. The results indicate that the optimum conditions for flotation of copper minerals from the material were identified as grinding fineness of 85%, dosage of CaO at 2000g/t , dosage of Na2S at 200 g/t, dosage of butyl xanthate 40g/t. Under such a condition, a copper recovery of 88.17% with a concentrate grade of 26.86% was achieved from the material using a closed circuit flow sheet of "one-stage roughing flotation, one-stage cleaning flotation and one-stage scavenging flotation.

Recovering Limonite by High Intensity Magnetic Separation Technology from Honghe Limonite Ore

2013 ◽  
Vol 634-638 ◽  
pp. 3437-3441
Author(s):  
Guo Yin Xu ◽  
Dian Wen Liu ◽  
Pu Rong Wang ◽  
Bing Liang Xu ◽  
Wen Juan Zhao ◽  
...  
Keyword(s):  
Magnetic Separation ◽  
High Intensity ◽  
Closed Circuit ◽  
Separation Technology ◽  
Iron Concentrate ◽  
One Stage

High intensity magnetic separation tests have been carried out on the oolitic limonite ore with complex relations between limonite and gangue minerals of Honghe prefecture, and a optimal flowsheet for recover limonite from run-of-mine was adopted at last. High intensity magnetic separation flowsheet with one stage rougher, cleaner and scavenger, which have been studied respectively. Iron concentrate containing 55.18%Fe could be obtained at yield of 53.20% and recovery of Fe 68.45 % in closed circuit test.

The Present Conditions of Micro-Fine Disseminated Refractory Oolitic Hematite and Expectation

2013 ◽  
Vol 734-737 ◽  
pp. 211-214
Author(s):  
Shu Xian Liu ◽  
Xiao Long Lu ◽  
Fu Sheng Niu ◽  
Jun Xie
Keyword(s):  
Magnetic Separation ◽  
Complex Structure ◽  
Mineral Processing ◽  
Current Situation ◽  
Practical Significance ◽  
Reverse Flotation ◽  
Sorting Technique

Because of oolitic hematite micro-fine disseminated and complex structure and other characteristics, has been considered the world's mineral processing problems. This paper studies the use of its current situation in China and some traditional sorting techniques such as strong magnetic separation - reverse flotation, flocculation - intensity magnetic separation, magnetic roasting - magnetic, and discuss an efficient sorting technique - the deep reduction, which has important practical significance for oolitic hematite sorting.

Experimental Study on the Mineral Processing of a High-Clay and Lean Hematite

2012 ◽  
Vol 550-553 ◽  
pp. 2831-2834
Author(s):  
Wei Zhi Wang ◽  
Qing Mei Jia ◽  
Chun Guang Yang
Keyword(s):  
Experimental Study ◽  
Magnetic Separation ◽  
Experimental Research ◽  
High Intensity ◽  
Mineral Processing ◽  
Shaking Table ◽  
Iron Recovery ◽  
Iron Concentrate ◽  
Second Stage ◽  
Low Intensity

The mineral processing experimental research was carried out on a high mud content lean hematite. The results showed that using the technological flowsheet of “stage grinding- low intensity magnetic separation for obtaining concentrate - high-intensity magnetic separation for discarding tailings-gravity separation(shaking table)”,a final iron concentrate with TFe grade of 65.89% ,yield of 19.35% and iron recovery of 52.32% from the raw ores with TFe grade of 24.07％ was obtained, with the first stage grinding size being 50% -200 mesh and the second stage,95% -200 mesh.

A Comprehensive Recovery of Copper-Iron Experimental Research in the Copper Smelting Slag

2014 ◽  
Vol 926-930 ◽  
pp. 4197-4200 ◽  
Author(s):  
Xing Ke Shang ◽  
Zhuo Yue Lan ◽  
Qi Fu Zhang ◽  
Ting Ting Li
Keyword(s):  
Magnetic Separation ◽  
Experimental Research ◽  
Mineral Resources ◽  
Closed Circuit ◽  
Copper Smelting ◽  
Copper Concentrate ◽  
Iron Concentrate ◽  
Valuable Metals ◽  
Smelting Slag ◽  
Comprehensive Recovery

With the depletion of mineral resources, more attention is paid on the secondary resources to recover valuable metals. In this paper, a research is carried out to recover copper and iron from copper smelting slag by flotation and magnetic separation. The influence of grinding fineness and collectors on flotation of copper are investigated. A copper concentrate is obtained by flotation and an iron concentrate is obtained by magnetic separation in the closed circuit flowsheet. The copper concentrate contains 18.86% Cu with a recovery of 72.36%, and the iron concentrate contains 52.24% Fe with a recovery of 70.87%.

Study on the Recovery of Sulfur from Multi-Metals Tailings

2013 ◽  
Vol 734-737 ◽  
pp. 1110-1113
Author(s):  
Xiang Wen Lv ◽  
Xiong Tong ◽  
Xian Xie ◽  
Qing Hua Zhou ◽  
Yong Cheng Zhou ◽  
...  
Keyword(s):  
Experimental Research ◽  
Copper Sulfate ◽  
Mineral Processing ◽  
Sulfide Mineral ◽  
Economic Benefits ◽  
Processing Technology ◽  
Environmental Benefit ◽  
New Type ◽  
Concentrate Grade ◽  
Sulfur Containing

A beneficiation experimental research is conducted on sulfur-containing 18.17% multi-metals tailings. On the basis of the traditional mineral processing technology, it introduces X-51, a new type sulfide mineral activator, to instead of copper sulfate. Eventually, the sulfur concentrate grade is 47.51% with the recovery of 92.11%. The effectively recovery of the sulfur is creating good economic benefits and environmental benefit.

Experimental Studies on a Mineral Containing Titanium in Baoding Area

2013 ◽  
Vol 826 ◽  
pp. 34-37 ◽  
Author(s):  
Guo Zhen Liu ◽  
Shu Juan Dai ◽  
Li Mei Bai ◽  
Yu Xin Ma ◽  
Yong Zhang
Keyword(s):  
Magnetic Separation ◽  
High Intensity ◽  
Ph Value ◽  
Experimental Studies ◽  
Mineral Processing ◽  
Shaking Table ◽  
Gravity Concentration

The main elements can be recovered for mineral processing in a mineral containing titanium of Baoding area were Ti, Fe and V, and the elements in the main gangue minerals were Si and Al. Gravity concentration, gravity concentration-high intensity magnetic separation and gravity concentration-flotation tests were performed on the ore sample respectively. The results showed that, in the test of shaking table, when the grinding fineness was -0.074mm 93%, the productivity of concentrate can reach 32.24%; when grinding fineness was -0.074mm 93%, after gravity concentration-magnetic separation, 30.25% of concentrate productivity can be attained; when the grinding fineness was -0.074mm 85%, after gravity concentration-flotation, the productivity of concentrate was 3.31%. Maybe it's the condition of the tests wasn't controlled well, especially adjusting pH value in the flotation stage, it's hard to control, so the results were not very good.

Research on Exploration of Mineral Processing for a Iron Ore

2015 ◽  
Vol 1094 ◽  
pp. 397-400
Author(s):  
Xian Xie ◽  
Zi Xuan Yang ◽  
Xiong Tong ◽  
Ji Yong Li
Keyword(s):  
Magnetic Separation ◽  
Calcium Oxide ◽  
Iron Ore ◽  
Mineral Processing ◽  
Low Grade ◽  
Iron Minerals ◽  
Iron Mineral ◽  
Ore Minerals ◽  
Separation Test

Iron ore minerals are mainly silicate-type iron minerals in raw ore, and its distribution rate was 51.93%; followed by magnetic iron, and its distribution rate was 36.81%; content and distribution rate of other minerals was very low; element grade of iron, phosphorus, sulfur, silica were 11.90%, 0.043%, 0.013% and 45.23%, the main gangue were silica and calcium oxide, recyclable iron minerals mainly is magnetic iron mineral. Due to the grade of iron of raw ore and the amounts of optional magnetite was relatively little, in order to investigate the optional of low-grade ore, weak magnetic separation test and weak magnetic separation tailings-strong magnetic separation test were put into effect.

Sign in / Sign up

Export Citation Format

Share Document