Synthesis and Characterization of Carbon Nanotubes from Palm Oil by Aerosol-Assisted CVD

2013 ◽  
Vol 667 ◽  
pp. 218-223
Author(s):  
M. Maryam ◽  
A.B. Suriani ◽  
M.S. Shamsudin ◽  
Mohamad Rusop Mahmood
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Palm Oil ◽  
Deposition Temperature ◽  
Multiwall Carbon Nanotubes ◽  
Single Wall Carbon Nanotubes ◽  
X Ray ◽  
Weight Percentage ◽  
Transmission Electron ◽  
Reaction Furnace

This paper will report on the synthesis of bundles of aligned single wall carbon nanotubes (SWCNTs) and multiwall carbon nanotubes (MWCNTs) from palm oil precursor and ferrocene as catalyst source by two stage aerosol-assisted CVD system at various deposition temperature ranging from 700-900oC. Palm oil was pyrolised into the furnace which contained the catalyst source producing black substances at the wall of the reaction furnace which were then collected to be characterized. Field emission scanning electron microscopy equipped with energy dispersive X-ray was used to obtain weight percentage, identification of samples and image of CNTs which showed different structures and diameters of CNTs relative to the deposition temperature of furnace. Raman Spectroscopy was used to further study the quality and identification of samples and finally X-ray powder diffraction was used to determine the crystalinity of samples. Individual micrograph of MWNTs at optimized deposition temperature was also obtained from the high resolution transmission electron microscopy.

scholarly journals Composite Nanofibers Containing Multiwall Carbon Nanotubes as Biodegradable Membranes in Reconstructive Medicine

Nanomaterials ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 63 ◽  
Author(s):  
Andrzej Hudecki ◽  
Dorota Łyko-Morawska ◽  
Wirginia Likus ◽  
Magdalena Skonieczna ◽  
Jarosław Markowski ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Maxillofacial Surgery ◽  
Multiwall Carbon Nanotubes ◽  
Dermal Fibroblasts ◽  
Hydroxyl Groups ◽  
X Ray ◽  
Biological Responses ◽  
Transmission Electron ◽  
Multiwall Carbon

We have tested titanium (Ti) plates that are used for bone reconstruction in maxillofacial surgery, in combination with five types of novel long-resorbable biomaterials: (i) PCL0—polycaprolactone without additives, (ii) PCLMWCNT—polycaprolactone with the addition of multiwall carbon nanotubes (MWCNT), (iii) PCLOH—polycaprolactone doped with multiwall carbon nanotubes (MWCNT) containing –OH hydroxyl groups, (iv) PCLCOOH—polycaprolactone with the addition of multiwall carbon nanotubes (MWCNT) containing carboxyl groups, and (v) PCLTI—polycaprolactone with the addition of Ti nanoparticles. The structure and properties of the obtained materials have been examined with the use of Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), and/or X-ray powder diffraction (XRD). Titanium BR plates have been covered with: (i) PCL0 fibers (PCL0BR—connection plates), (ii) PCLMWCNT fibers (PCLMWCNTBR—plates), (iii) PCLOH fibers (PCLOHBR—plates), (iv) PCLCOOH (PCLCOOHBR—plates), (v) PCLTI fiber (PCLTIBR—connection plates). Such modified titanium plates were exposed to X-ray doses corresponding to those applied in head and neck tumor treatment. The potential leaching of toxic materials upon the irradiation of such modified titanium plates, and their effect on normal human dermal fibroblasts (NHDF) have been assessed by MTT assay. The presented results show variable biological responses depending on the modifications to titanium plates.

CHARACTERIZATION AND ELECTRICAL PROPERTIES OF ALIGNED CARBON NANOTUBES WITH HIGH ASPECT RATIO

2011 ◽  
Vol 10 (01n02) ◽  
pp. 23-28
Author(s):  
RAVI BHATIA ◽  
V. PRASAD ◽  
M. REGHU
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Aspect Ratio ◽  
Multiwall Carbon Nanotubes ◽  
High Quality ◽  
Transmission Electron Microscopy Analysis ◽  
Transmission Electron ◽  
Electron Microscopy Analysis ◽  
High Degree

High-quality multiwall carbon nanotubes (MWNTs) were produced by a simple one-step technique. The production of MWNTs was based on thermal decomposition of the mixture of a liquid phase organic compound and ferrocene. High degree of alignment was noticed by scanning electron microscopy. The aspect ratio of as-synthesized MWNTs was quite high (more than 4500). Transmission electron microscopy analysis showed the presence of the catalytic iron nanorods at various lengths of MWNTs. Raman spectroscopy was used to know the quality of MWNTs. The ratio of intensity of the G-peak to the D-peak was very high which revealed high quality of MWNTs. Magnetotransport studies were carried out at low temperature and a negative MR was noticed.

Metal Coated Functionalized Single-Walled Carbon Nanotubes for Composites Application

2007 ◽  
Vol 561-565 ◽  
pp. 655-658 ◽  
Author(s):  
Qiang Zeng ◽  
Jennifer Luna ◽  
Y. Bayazitoglu ◽  
Kenneth Wilson ◽  
M. Ashraf Imam ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Single Walled Carbon Nanotubes ◽  
Metal Composite ◽  
X Ray ◽  
Single Walled Carbon ◽  
Transmission Electron ◽  
Nucleation Sites ◽  
Metal Composite Materials ◽  
Walled Carbon Nanotubes

This study is considered as a method for producing multifunctional metal composite materials by using Single-walled Carbon Nanotubes (SWNTs). In this research, various metals (Ni, Cu, Ag ) were successfully deposited onto the surface of SWNTs. It has been found that homogenous dispersion and dense nucleation sites are the necessary conditions to form uniform coating on SWNTs. Functionalization has been applied to achieve considerable improvement in the dispersion of purified single-walled carbon nanotubes. A three-step electroless plating approach was used and the coating mechanism is described in the paper. The samples were characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, and energy-dispersive X-ray spectroscopy (EDX). The application of coated SWNTs in Titanium will be discussed in this paper.

scholarly journals Observation and Characterization of Fragile Organometallic Molecules Encapsulated in Single-Wall Carbon Nanotubes

2014 ◽  
Vol 2014 ◽  
pp. 1-5
Author(s):  
Daisuke Ogawa ◽  
Ryo Kitaura ◽  
Takeshi Saito ◽  
Shinobu Aoyagi ◽  
Eiji Nishibori ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
High Yield ◽  
Single Wall Carbon Nanotubes ◽  
X Ray Diffraction ◽  
Single Wall Carbon ◽  
X Ray ◽  
Transmission Electron ◽  
Organometallic Molecules ◽  
X Ray Absorption

Thermally fragile tris(η5-cyclopentadienyl)erbium (ErCp3) molecules are encapsulated in single-wall carbon nanotubes (SWCNTs) with high yield. We realized the encapsulation of ErCp3with high filling ratio by using high quality SWCNTs at an optimized temperature under higher vacuum. Structure determination based on high-resolution transmission electron microscope observations together with the image simulations reveals the presence of almost free rotation of each ErCp3molecule in SWCNTs. The encapsulation is also confirmed by X-ray diffraction. Trivalent character of Er ions (i.e., Er3+) is confirmed by X-ray absorption spectrum.

Encapsulated Fullerenes Within Single Wall Carbon Nanotubes

1999 ◽  
Vol 5 (S2) ◽  
pp. 182-183
Author(s):  
Brian W. Smith ◽  
David E. Luzzi
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Pulsed Laser ◽  
Irradiation Damage ◽  
Laser Vaporization ◽  
Single Wall Carbon Nanotubes ◽  
Phase Object ◽  
Parallel Lines ◽  
Weak Phase ◽  
Transmission Electron

It is well documented that the pulsed laser vaporization of graphite produces both carbon nanotubes and C60 in the presence of certain metallic catalysts. In nanotube production most of the Ceo is removed along with other residual contaminants during succeeding purification and annealing steps. The possibility of C60 becoming trapped inside a nanotube during this elaborate sequence has been considered but not previously detected.Nanotubes are observed with high resolution transmission electron microscopy under conditions chosen to minimize both exposure time and irradiation damage. Since a nanotube satisfies the weak phase object approximation, its image is a projection of the specimen -potential in the direction of the electron beam. The image has maximum contrast where the beam encounters the most carbon atoms, which occurs where it is tangent to the tube’s walls. Thus, the image consists of two dark parallel lines whose separation is equal to the tube diameter, 1.4 nm.

Stacking Faults in SiC Nanowires

2008 ◽  
Vol 8 (7) ◽  
pp. 3504-3510 ◽  
Author(s):  
K. L. Wallis ◽  
M. Wieligor ◽  
T. W. Zerda ◽  
S. Stelmakh ◽  
S. Gierlotka ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Stacking Faults ◽  
Multiwall Carbon Nanotubes ◽  
Structural Defects ◽  
X Ray Diffraction ◽  
Ir Spectrometry ◽  
X Ray ◽  
Sic Nanowires ◽  
Transmission Electron ◽  
Multiwall Carbon

SiC nanowires were obtained by a reaction between vapor silicon and multiwall carbon nanotubes, CNT, in vacuum at 1200 °C. Raman and IR spectrometry, X-ray diffraction and high resolution transmission electron microscopy, HRTEM, were used to characterize properties of SiC nanowires. Morphology and chemical composition of the nanowires was similar for all samples, but concentration of structural defects varied and depended on the origin of CNT. Stacking faults were characterized by HRTEM and Raman spectroscopy, and both techniques provided complementary results. Raman microscopy allowed studying structural defects inside individual nanowires. A thin layer of amorphous silicon carbide was detected on the surface of nanowires.

Efficient synthesis of carbon nanotubes with improved surface area by low-temperature solvothermal route from dichlorobenzene

2013 ◽  
Vol 67 (11) ◽  
Author(s):  
Gantigaiah Krishnamurthy ◽  
Sarika Agarwal
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Carbon Source ◽  
Surface Area ◽  
Heating Temperature ◽  
Outer Diameter ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

AbstractThe synthesis of well-aggregated carbon nanotubes in the form of bundles was achieved by the catalytic reduction of 1,2-dichlorobenzene by a solvothermal approach. The use of 1,2-dichlorobenzene as a carbon source yielded a comparably good percentage of carbon nanotubes in the range of 60–70 %, at a low reaction temperature of 200°C. The products obtained were analysed by X-ray diffraction, Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy techniques. The X-ray diffraction studies implied the presence of pure, crystalline, and well-ordered carbon nanotubes. The scanning electron and transmission electron microscopic images revealed the surface morphology, dimensions and the bundled form of the tubes. These micrographs showed the presence of multi-walled carbon nanotubes with an outer diameter of 30–55 nm, inner diameter of 15–30 nm, and lengths of several hundreds of nanometers. Brunauer-Emmett-Teller-based N2 gas adsorption studies were performed to determine the surface area and pore volume of the carbon nanotubes. These carbon nanotubes exhibit a better surface area of 385.30 m2 g−1. In addition, the effects of heating temperature, heating time, amount of catalyst and amount of carbon source on the product yield were investigated.

Synthesis of Silicon Carbide Nanoparticles from Carbon Nanotubes

2012 ◽  
Vol 602-604 ◽  
pp. 183-186 ◽  
Author(s):  
Jing Liu ◽  
Rong Wu ◽  
Jin Li ◽  
Yan Fei Sun ◽  
Ji Kang Jian
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Scanning Electron Microscopy ◽  
Silicon Carbide ◽  
Room Temperature ◽  
Sic Nanoparticles ◽  
X Ray ◽  
Transmission Electron ◽  
Cubic Silicon Carbide ◽  
Scanning Electron

In this paper, we report the synthesis of cubic silicon carbide (3C-SiC) nanoparticles by direction reaction of silicon powders and carbon nanotubes. The as-prepared SiC nanoparticles were characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy and Raman scattering at room temperature. The possible growth mechanism is proposed.

Sign in / Sign up

Export Citation Format

Share Document