Research of Baseball’s Best Batting Position Changes with the Selection of Material of Baseball

2013 ◽  
Vol 690-693 ◽  
pp. 1826-1830
Author(s):  
Li Ping Du ◽  
Wu Li ◽  
Wen Sheng Han
Keyword(s):  
Major League Baseball ◽  
Center Of Mass ◽  
Original Material ◽  
Sweet Spot ◽  
Collision Model ◽  
Exit Speed ◽  
The Moment ◽  
Definition Of ◽  
Selection Of ◽  
Parameters Calculation

From the aspect of the fastest exit speed of the ball and through the collision model of mechanics, we analyzed the best hitting point which results in the fastest exit speed of the ball and the change of the best hitting point. Based on this model, we gave a very practical definition of the sweet spot, and we also found out the effect of the baseball bat’s material on the sweet spot. The distances from the best hitting point to the end of the baseball bat result from the three different materials, which are the bat’s original material, aluminum and the corked material. Through the sensitivity analysis, three parameters affecting the hitting position resulting in the ball’s fastest exit speed are the weight of the bat, the center of mass and the moment-of-inertia. In the process of the three parameters’ calculation, the infinitesimal method is used. As can be found out that the length of the sweet spot results from the corked and the aluminum are much longer than results from the original material. The longer the length of sweet spot, the possibility that the hitter hits the fast ball is higher. Also ball hit by the aluminum bat is faster than that hit by the bat made out of the original material. The above analysis can explain that why the aluminum bat and corked bat are prohibited by Major League Baseball

Motion Simulation of Key Components in a Package Machine

2012 ◽  
Vol 557-559 ◽  
pp. 2303-2306
Author(s):  
Shu Bin Kan
Keyword(s):  
Structural Parameters ◽  
Center Of Mass ◽  
Motion Simulation ◽  
Software Environment ◽  
Optimization Result ◽  
Adams Software ◽  
Motion Characteristic ◽  
The Moment ◽  
Selection Of

The motion characteristic of key components is a decisional factor to the working reliability and stability of a package machine. In this paper, the motion simulation of a key component is carried out in the ADAMS software environment. By analysis of the force, variance of the center-of-mass and the moment of the component, the mutation point in the motion is found, and then the structure is optimized by selection of different structural parameters. The optimization result shows a significant improvement for the reliability and stability of the whole machine.

scholarly journals Construction of a numerical model of suspension in a numerical simulation of sedimentation

2018 ◽  
Vol 46 ◽  
pp. 00011
Author(s):  
Krzysztof Kołodziejczyk
Keyword(s):  
Numerical Simulation ◽  
Numerical Model ◽  
Numerical Simulations ◽  
Particle Composition ◽  
Polydisperse Particle ◽  
Multiphase Systems ◽  
The Moment ◽  
Definition Of ◽  
Selection Of ◽  
The Way

Modeling of multiphase systems, which includes suspensions, is an issue that is continually developed. There are no procedures at the moment that would clearly determine the way in which suspension is defined in numerical simulations. The article presents an analysis of the selection of a numerical model and the definition of the suspension with a polydisperse particle composition.

Consumption

Sociology ◽  
2013 ◽  
Author(s):  
Ian Woodward
Keyword(s):  
Cultural Change ◽  
Cultural Learning ◽  
Over The Counter ◽  
Emotional Factors ◽  
Sociological Inquiry ◽  
Starting Point ◽  
The Moment ◽  
Definition Of ◽  
Sociology Of Consumption ◽  
Selection Of

A rudimentary definition of consumption emphasizes the purchase and use of goods or services, noting that the point of expenditure on such items and the instant of their usage constitute the act of consumption. This understanding of consumption reflects a utilitarian, economic approach to consumption that should be seen as a starting point, since the range of theoretical and empirical innovations within the field of consumption studies—which exists within sociology, as well as having disciplinary expressions within anthropology, history, geography, business, and marketing studies—has established an understanding of consumption as a complex, widespread process. “The Sociology of Consumption” by Colin Campbell in Daniel Miller, ed., Acknowledging Consumption: A Review of New Studies (London: Routledge, 1995) adds a number of other stages to this basic definition of consumption. Campbell states that consumption involves not just purchasing or using a good or service but also selecting it, maintaining it, possibly repairing it, and ultimately, disposing of it in some way. Within each of these stages there are a number of complex subprocesses that consumption studies scholars have increasingly paid attention to. For example, the selection of goods is sometimes undertaken largely subconsciously or automatically but also based upon various social norms, cultural learning, emotional factors, prejudices, facets of identity, taste, or style. Likewise, disposing of a good may mean literally throwing it away, or it may mean reselling it, donating it, or passing it on to others. Campbell’s definition usefully shows how consumption is a process over time that fuses practical, emotional, material, and economic factors, rather than merely the moment when a person pays for something over the counter. In many ways, this broader understanding of consumption points to a range of innovations within the field that have occurred in the last few decades, which in turn direct us to broader changes in patterns of sociological inquiry. Questions of labor, industry, production units, social, legal, and economic institutions, technology, and social class were the core stuff of social inquiry through much of the 20th century. In mainstream sociology, consumption was for most of the discipline’s history simply not a relevant analytic category, which explains why for much of sociology’s history consumption was understood through theories of capitalist production. However, in the last few decades researchers have increasingly situated practices of consumption and a consumerist ethic as central for understanding broader social and cultural change, impacting on the way sociologists have conceptualized such diverse areas of social change as cultural and economic inequality, urban and spatial development, identity and selfhood, gender relations and performativity, media, and advertising.

Selection and Preparation of Specific Tissue Regions For Tem Using Large Epoxy-Embedded Blocks

1973 ◽  
Vol 31 ◽  
pp. 324-325 ◽  
Author(s):  
P. M. Lowrie ◽  
W. S. Tyler
Keyword(s):  
Electron Microscopy ◽  
Anatomical Structures ◽  
Ultrastructural Studies ◽  
Transmission Electron ◽  
Microscopic Evaluation ◽  
Embedded Blocks ◽  
Specific Tissue ◽  
Definition Of ◽  
Areas Of Interest ◽  
Selection Of

The importance of examining stained 1 to 2μ plastic sections by light microscopy has long been recognized, both for increased definition of many histologic features and for selection of specimen samples to be used in ultrastructural studies. Selection of specimens with specific orien ation relative to anatomical structures becomes of critical importance in ultrastructural investigations of organs such as the lung. The uantity of blocks necessary to locate special areas of interest by random sampling is large, however, and the method is lacking in precision. Several methods have been described for selection of specific areas for electron microscopy using light microscopic evaluation of paraffin, epoxy-infiltrated, or epoxy-embedded large blocks from which thick sections were cut. Selected areas from these thick sections were subsequently removed and re-embedded or attached to blank precasted blocks and resectioned for transmission electron microscopy (TEM).

MULTISTAGE ROCKET FLIGHT SIMULATION

2019 ◽  
pp. 105-107
Author(s):  
A. S. Busygin ◽  
А. V. Shumov
Keyword(s):  
State Vector ◽  
Center Of Mass ◽  
Flight Simulation ◽  
Continuous Change ◽  
Information Tools ◽  
The Earth ◽  
Proposed Model ◽  
Piecewise Continuous ◽  
The Moment ◽  
Simulated Object

The paper considers a method for simulating the flight of a multistage rocket in Matlab using Simulink software for control and guidance. The model takes into account the anisotropy of the gravity of the Earth, changes in the pressure and density of the atmosphere, piecewise continuous change of the center of mass and the moment of inertia of the rocket during the flight. Also, the proposed model allows you to work out various targeting options using both onboard and ground‑based information tools, to load information from the ground‑based radar, with imitation of «non‑ideality» of incoming target designations as a result of changes in the accuracy of determining coordinates and speeds, as well as signal fluctuations. It is stipulated that the design is variable not only by the number of steps, but also by their types. The calculations are implemented in a matrix form, which allows parallel operations in each step of processing a multidimensional state vector of the simulated object.

scholarly journals Promotion of Resilience in Migrants: A Systematic Review of Study and Psychosocial Intervention

2021 ◽  
Author(s):  
Maria Ciaramella ◽  
Nadia Monacelli ◽  
Livia Concetta Eugenia Cocimano
Keyword(s):  
Systematic Review ◽  
Psychosocial Intervention ◽  
Life Experiences ◽  
Psychosocial Interventions ◽  
Migrant Population ◽  
Methodological Choices ◽  
Research Questions ◽  
Definition Of ◽  
Selection Of

AbstractThis systematic review aimed to contribute to a better and more focused understanding of the link between the concept of resilience and psychosocial interventions in the migrant population. The research questions concerned the type of population involved, definition of resilience, methodological choices and which intervention programmes were targeted at migrants. In the 90 articles included, an heterogeneity in defining resilience or not well specified definition resulted. Different migratory experiences were not adequately considered in the selection of participants. Few resilience interventions on migrants were resulted. A lack of procedure’s descriptions that keep in account specific migrants’ life-experiences and efficacy’s measures were highlighted.

scholarly journals Modeling, comparison and evaluation of one-DOF six-bar bioinspired jumping leg mechanisms

2021 ◽  
Vol 13 (2) ◽  
pp. 168781402199295
Author(s):  
Ziqiang Zhang ◽  
Qi Yang ◽  
Xingkun Liu ◽  
Chuanzhong Zhang ◽  
Jinnong Liao
Keyword(s):  
Center Of Mass ◽  
Principal Component ◽  
Analysis Method ◽  
Index Distribution ◽  
Inertial Moment ◽  
Structure Index ◽  
Mean And Variance ◽  
Research Objects ◽  
Leg Mechanisms ◽  
Selection Of

One degree-of-freedom (DOF) jumping leg has the advantages of simple control and high stiffness, and it has been widely used in bioinspired jumping robots. Compared with four-bar jumping leg, six-bar jumping leg mechanism can make the robot achieve more abundant motion rules. However, the differences among different configurations have not been analyzed, and the choice of configurations lacks basis. In this study, five Watt-type six-bar jumping leg mechanisms were selected as research objects according to the different selection of equivalent tibia, femur and trunk link, and a method for determining the dimension of the jumping leg was proposed based on the movement law of jumping leg of locust in take-off phase. On this basis, kinematics indices (sensitivity of take-off direction angle and trunk attitude angle), dynamics indices (velocity loss, acceleration fluctuation, and mean and variance of total inertial moment) and structure index (distribution of center of mass) were established, and the differences of different configurations were compared and analyzed in detail. Finally, according to the principal component analysis method, the optimal selection method for different configurations was proposed. This study provides a reference for the design of one DOF bioinspired mechanism.

scholarly journals Getting to Hope: Perspectives from Patients and Caregivers Living with Chronic Childhood Illness

Children ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 525
Author(s):  
Emily von Scheven ◽  
Bhupinder K. Nahal ◽  
Rosa Kelekian ◽  
Christina Frenzel ◽  
Victoria Vanderpoel ◽  
...  
Keyword(s):  
Conceptual Model ◽  
Research Question ◽  
Young Patients ◽  
Future Research ◽  
Childhood Onset ◽  
Virtual Focus Groups ◽  
Definition Of ◽  
Selection Of ◽  
Chronic Childhood ◽  
Research Studies

Promoting hope was identified in our prior work as the top priority research question among patients and caregivers with diverse childhood-onset chronic conditions. Here, we aimed to construct a conceptual model to guide future research studies of interventions to improve hope. We conducted eight monthly virtual focus groups and one virtual workshop with patients, caregivers, and researchers to explore key constructs to inform the model. Discussions were facilitated by Patient Co-Investigators. Participants developed a definition of hope and identified promotors and inhibitors that influence the experience of hope. We utilized qualitative methods to analyze findings and organize the promotors and inhibitors of hope within three strata of the socio-ecologic framework: structural, interpersonal, and intrapersonal. Participants identified three types of interventions to promote hope: resources, navigation, and activities to promote social connection. The hope conceptual model can be used to inform the selection of interventions to assess in future research studies aimed at improving hope and the specification of outcome measures to include in hope research studies. Inclusion of the health care system in the model provides direction for identifying strategies for improving the system and places responsibility on the system to do better to promote hope among young patients with chronic illness and their caregivers.

scholarly journals Examining and Fine-tuning the Selection of Glycan Compositions with GlyConnect Compozitor

2020 ◽  
Vol 19 (10) ◽  
pp. 1602-1618 ◽  
Author(s):  
Thibault Robin ◽  
Julien Mariethoz ◽  
Frédérique Lisacek
Keyword(s):  
Search Engine ◽  
Posttranslational Modifications ◽  
Search Engines ◽  
Web Application ◽  
Contextual Information ◽  
Fine Tuning ◽  
Data Sources ◽  
Web Interface ◽  
Definition Of ◽  
Selection Of

A key point in achieving accurate intact glycopeptide identification is the definition of the glycan composition file that is used to match experimental with theoretical masses by a glycoproteomics search engine. At present, these files are mainly built from searching the literature and/or querying data sources focused on posttranslational modifications. Most glycoproteomics search engines include a default composition file that is readily used when processing MS data. We introduce here a glycan composition visualizing and comparative tool associated with the GlyConnect database and called GlyConnect Compozitor. It offers a web interface through which the database can be queried to bring out contextual information relative to a set of glycan compositions. The tool takes advantage of compositions being related to one another through shared monosaccharide counts and outputs interactive graphs summarizing information searched in the database. These results provide a guide for selecting or deselecting compositions in a file in order to reflect the context of a study as closely as possible. They also confirm the consistency of a set of compositions based on the content of the GlyConnect database. As part of the tool collection of the Glycomics@ExPASy initiative, Compozitor is hosted at https://glyconnect.expasy.org/compozitor/ where it can be run as a web application. It is also directly accessible from the GlyConnect database.

General Schema Theory for Genetic Programming with Subtree-Swapping Crossover: Part II

2003 ◽  
Vol 11 (2) ◽  
pp. 169-206 ◽  
Author(s):  
Riccardo Poli ◽  
Nicholas Freitag McPhee
Keyword(s):  
Genetic Programming ◽  
Schema Theory ◽  
Exact Formulation ◽  
Expected Number ◽  
Size Evolution ◽  
General Schema ◽  
Definition Of ◽  
Effective Fitness ◽  
Selection Of ◽  
Exact Definition

This paper is the second part of a two-part paper which introduces a general schema theory for genetic programming (GP) with subtree-swapping crossover (Part I (Poli and McPhee, 2003)). Like other recent GP schema theory results, the theory gives an exact formulation (rather than a lower bound) for the expected number of instances of a schema at the next generation. The theory is based on a Cartesian node reference system, introduced in Part I, and on the notion of a variable-arity hyperschema, introduced here, which generalises previous definitions of a schema. The theory includes two main theorems describing the propagation of GP schemata: a microscopic and a macroscopic schema theorem. The microscopic version is applicable to crossover operators which replace a subtree in one parent with a subtree from the other parent to produce the offspring. Therefore, this theorem is applicable to Koza's GP crossover with and without uniform selection of the crossover points, as well as one-point crossover, size-fair crossover, strongly-typed GP crossover, context-preserving crossover and many others. The macroscopic version is applicable to crossover operators in which the probability of selecting any two crossover points in the parents depends only on the parents' size and shape. In the paper we provide examples, we show how the theory can be specialised to specific crossover operators and we illustrate how it can be used to derive other general results. These include an exact definition of effective fitness and a size-evolution equation for GP with subtree-swapping crossover.

Sign in / Sign up

Export Citation Format

Share Document