Preparation of Graphene by Green Reduction Method and Characterization

2013 ◽  
Vol 807-809 ◽  
pp. 515-520 ◽  
Author(s):  
Dong Zhi Chen ◽  
Xue Mei Lin
Keyword(s):  
Electrical Conductivity ◽  
Graphene Oxide ◽  
Graphite Oxide ◽  
Laser Raman Spectroscopy ◽  
X Ray Diffraction ◽  
Ultrasonic Dispersion ◽  
Environment Friendly ◽  
X Ray ◽  
Laser Raman ◽  
Transmission Electron

Graphite oxide was prepared by Hummers method and got graphene oxide by ultrasonic dispersion in water, and using a cheap and environment-friendly fructose as reductant, graphene oxide could be reduced into graphene under mild condition. Meanwhile, the structure and morphology of obtained product was characterized and analyzed by testing methods such as Fourier transform Infrared spectroscopy, X-ray diffraction, Laser Raman spectroscopy, Transmission electron microscope and so on. In addition, the electrical conductivity of obtained graphene was determinated.The experimental results show that graphite oxide can be reduced by fructose under mild conditions and can get graphene with good structure and dispersibility. And the electrical conductivity of graphene prepared by the reduction of graphite oxide with fructose is 35.7 Scm-1, which has great improvement on conducting performance compared with graphite oxide. Moreover, It is non-toxic, non-polluting and friendly to the environment in preparation process of graphene, which lays the groundwork for mass production of graphene materials.

Absorbing Manganese Oxide on Multi-Walled Carbon Nanotubes

2007 ◽  
Vol 121-123 ◽  
pp. 85-88
Author(s):  
Xian Ping Huang ◽  
Chun Xu Pan
Keyword(s):  
Carbon Nanotubes ◽  
Laser Raman Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Laser Raman ◽  
Transmission Electron ◽  
Mno2 Nanoparticles ◽  
Multi Walled Carbon Nanotubes ◽  
Cnts Surface ◽  
Walled Carbon Nanotubes

A layer of Manganese dioxides (γ-MnO2) was absorbed upon carbon nanotubes (CNTs) surface by using a chemical deposit process. The morphologies of the MnO2/CNTs composite were characterized using transmission electron microscopy (TEM), energydispersive X-ray spectrometry (EDS), X-ray diffraction (XRD) and laser Raman spectroscopy (RS). It is found that absorbed layer belongs to the γ-MnO2 nanoparticles in size about 10 nm, and coated homogeneously around the CNTs. It is expected that this MnO2/CNTs composite will be widely applied to make supercapacitors.

scholarly journals Effect of Graphene Oxide Concentration in Electrolyte on Corrosion Behavior of Electrodeposited Zn–Electrochemical Reduction Graphene Composite Coatings

Coatings ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 758 ◽  
Author(s):  
Yang ◽  
Zhang ◽  
Wang ◽  
Wang ◽  
Chen ◽  
...  
Keyword(s):  
Corrosion Behavior ◽  
Electrochemical Impedance ◽  
Composite Coatings ◽  
Laser Raman Spectroscopy ◽  
304 Stainless Steel ◽  
Sulfate Electrolyte ◽  
X Ray Diffraction ◽  
X Ray ◽  
Tafel Polarization ◽  
Laser Raman

Pure Zn and Zn–ERGO composite coatings were prepared by direct current electrodeposition on 304 stainless steel. Samples were characterized by X-ray diffraction (XRD), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM/EDS), and laser Raman spectroscopy (Raman). Results obtained have shown that the concentration of GO sheets in zinc sulfate electrolyte has an important effect on the preferred crystal orientation and the surface morphology of Zn–ERGO composite coatings. A study of the corrosion behavior of the coatings by Tafel polarization and electrochemical impedance spectroscopic (EIS) methods leads to the conclusion that the Zn-1.0 g/L ERGO composite coating possesses the best corrosion resistance compared to the pure Zn coating and other composite coatings in this study.

scholarly journals Reduced Graphene Oxide–Epoxy Grafted Poly(Styrene-Co-Acrylate) Composites for Corrosion Protection of Mild Steel

Coatings ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 666
Author(s):  
Xinchuan Fan ◽  
Yue Hu ◽  
Yijun Zhang ◽  
Jiachen Lu ◽  
Xiaofeng Chen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
X Ray Diffraction ◽  
Corrosion Properties ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Scanning Electron

Reduced graphene oxide–epoxy grafted poly(styrene-co-acrylate) composites (GESA) were prepared by anchoring different amount of epoxy modified poly(styrene-co-acrylate) (EPSA) onto reduced graphene oxide (rGO) sheets through π–π electrostatic attraction. The GESA composites were characterized by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The anti-corrosion properties of rGO/EPSA composites were evaluated by electro-chemical impedance spectroscopy (EIS) in hydroxyl-polyacrylate coating, and the results revealed that the corrosion rate was decreased from 3.509 × 10−1 to 1.394 × 10−6 mm/a.

scholarly journals Structural Characterization of Graphene Oxide: Surface Functional Groups and Fractionated Oxidative Debris

Nanomaterials ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 1180 ◽  
Author(s):  
Elvin Aliyev ◽  
Volkan Filiz ◽  
Muntazim M. Khan ◽  
Young Joo Lee ◽  
Clarissa Abetz ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Functional Groups ◽  
Structural Model ◽  
Oxide Surface ◽  
Resonance Spectroscopy ◽  
X Ray Diffraction ◽  
Surface Functional Groups ◽  
X Ray ◽  
Transmission Electron

The purpose of this work is the structural analysis of graphene oxide (GO) and by means of a new structural model to answer the questions arising from the Lerf–Klinowski and the Lee structural models. Surface functional groups of GO layers and the oxidative debris (OD) stacked on them were investigated after OD was extracted. Analysis was performed successfully using Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-Vis), X-ray photoemission spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDX), Raman spectroscopy, solid-state nuclear magnetic resonance spectroscopy (SSNMR), standardized Boehm potentiometric titration analysis, elemental analysis, X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The analysis showed that graphene oxide layers, as well as oxidative debris contain different functional groups such as phenolic –OH, ketone, lactone, carboxyl, quinone and epoxy. Based on these results, a new structural model for GO layers is proposed, which covers all spectroscopic data and explains the presence of the other oxygen functionalities besides carboxyl, phenolic –OH and epoxy groups.

Study on integration of aluminum-doped zinc oxide (AZO) thin films with graphene oxide (GO)

2018 ◽  
Vol 32 (19) ◽  
pp. 1840044
Author(s):  
Aditya Dalal ◽  
Animesh Mandal ◽  
Shubhada Adhi ◽  
Kiran Adhi
Keyword(s):  
Thin Films ◽  
Raman Spectroscopy ◽  
Graphene Oxide ◽  
X Ray Diffraction ◽  
Visible Spectroscopy ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Aluminum Doped Zinc Oxide ◽  
Uv Visible

Aluminum (0.5 at.%)-doped ZnO (AZO) thin films were deposited by pulsed laser deposition technique (PLD) in oxygen ambient of 10[Formula: see text] Torr. The deposited thin films were characterized by x-ray diffraction (XRD), photoluminescence (PL), Raman spectroscopy and uv–visible spectroscopy (UV–vis). Next, graphene oxide (GO) was synthesized by Hummers method and was characterized by XRD, UV–vis spectroscopy, Raman spectroscopy and transmission electron microscopy (TEM). Thereafter, GO solution was drop-casted on AZO thin films. These films were then characterized by Raman Spectroscopy, UV–vis spectroscopy and PL. Attempt is being made to comprehend the modifications in properties brought about by integration.

Synthesis of CeO2/e-HTiNbO5 Nanocomposite and Its Application for Photocatalytic Oxidation Desulfurization

NANO ◽  
2016 ◽  
Vol 11 (02) ◽  
pp. 1650018 ◽  
Author(s):  
Yuanjiao Zhang ◽  
Ningning Wang ◽  
Jie He ◽  
Liangguo Da ◽  
Zhong Li
Keyword(s):  
Photocatalytic Activity ◽  
Photocatalytic Oxidation ◽  
Diffuse Reflectance Spectroscopy ◽  
Proton Exchange ◽  
Light Irradiation ◽  
Laser Raman Spectroscopy ◽  
Natural Light ◽  
X Ray Diffraction ◽  
Laser Raman ◽  
Transmission Electron

Nanoscaled CeO2/e-HTiNbO5 composite was assembled by a facile process using colloidal TiNbO[Formula: see text] (e-HTiNbO5) nanosheet and CeO2 colloid as precursors at room temperature. The nanosheet e-HTiNbO5 was obtained through proton-exchange and exfoliation process from its parent KTiNbO5. The microstructures and properties of the as-prepared samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Laser Raman spectroscopy (LRS), and UV-vis diffuse reflectance spectroscopy (UV-vis DRS), etc. The photocatalytic activity of the obtained nanocomposite is evaluated by the adsorption and photocatalytic oxidation of ethyl mercaptan (EM) under natural light irradiation. The results show that CeO2 nanoparticles are dispersed uniformly on the surface of e-HTiNbO5 and the layered structure of e-HTiNbO5 nanosheet maintains integrity. The interaction between dispersed CeO2 particles and e-HTiNbO5 results in lower bandgap compared to its precursors, and the photocatalytic activity of CeO2/e-HTiNbO5 are enhanced under natural light irradiation.

Sol–gel synthesis, structural and electrical properties of Li2CoSiO4 cathode material

2014 ◽  
Vol 07 (06) ◽  
pp. 1440001 ◽  
Author(s):  
Michał Świętosławski ◽  
Marcin Molenda ◽  
Piotr Natkański ◽  
Piotr Kuśtrowski ◽  
Roman Dziembaj ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Sol Gel ◽  
Lithium Ion ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Structural And Electrical Properties ◽  
Potential Alternative ◽  
Sol Gel Synthesis ◽  
First Time

Polyanionic cathode materials for lithium-ion batteries start to be considered as potential alternative for layered oxide materials. Among them, Li 2 CoSiO 4, characterized by outstanding capacity and working voltage, seems to be an interesting substitute for LiFePO 4 and related systems. In this work, structural and electrical investigations of Li 2 CoSiO 4 obtained by sol–gel synthesis were presented. Thermal decomposition of gel precursor was studied using EGA (FTIR)-TGA method. Chemical composition of the obtained material was confirmed using X-ray diffraction and energy-dispersive X-ray spectroscopy. The morphology of β- Li 2 CoSiO 4 was studied using transmission electron microscopy. High temperature electrical conductivity of Li 2 CoSiO 4 was measured for the first time. Activation energies of the electrical conductivity of two Li 2 CoSiO 4 polymorphs (β and γ) were determined. The room temperature electrical conductivity of those materials was estimated as well.

Synthesis and Electrochemical Characterization of Nano-Graphite Oxide for Enzyme Free Detection of Cholesterol

2015 ◽  
Vol 1786 ◽  
pp. 57-63
Author(s):  
Vasuda Bhatia ◽  
Bhawana Singh ◽  
Vinod K. Jain
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Graphite Oxide ◽  
Linear Response ◽  
X Ray Diffraction ◽  
X Ray ◽  
Embedding Technique ◽  
Transmission Electron ◽  
Ft Ir

ABSTRACTNano-graphite oxide has been synthesized from graphite flakes using modified Hummer’s method. Fourier transform infrared (FT-IR) data, x-ray diffraction (XRD) and transmission electron microscopy (TEM) revealed functionalization of the synthesised nano-graphitic platelets with oxygenated bonds. Using thermal embedding technique for the fabrication of self-assembled films, electrodes of nano-graphite oxide have been fabricated for enzyme free detection of cholesterol electrochemically. The electrodes provided a linear response for the enzyme less detection in the range of 50mg/dl to 500mg/dl with a correlation coefficient, R, of 0.99784 and sensitivity of 1.0587 µA/mg.

Synthesis and Characterization of Structure of Fe3O4@Graphene Oxide Nanocomposites

2016 ◽  
Vol 25 (6) ◽  
pp. 096369351602500 ◽  
Author(s):  
Ruimin Fu ◽  
Mingfu Zhu
Keyword(s):  
Graphene Oxide ◽  
Drug Carrier ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Ft Ir ◽  
Co Precipitation ◽  
Ft Ir Spectroscopy

Nowadays, the hummers method for preparation of graphene oxide (GO) was improved. The grapheme oxide @ Fe3O4 magnetic nanocomposites were synthesized by co-precipitation method. After analysing the morphology and structure of obtained nanocomposites by X-ray diffraction (XRD), transmission electron microscope (TEM) and Fourier transform infrared (FT-IR) spectroscopy, the result was shown as follows. The particle size of Fe3O4 in nanocomposites is 30 nm. Many functional groups are found in grapheme oxide, and such groups could be used to bind with the drug. In the test for magnetic properties, the nanocomposites gathered rapidly in the vicinity of the permanent magnet. The nanocomposites, with high superparamagnetism, can be used in the following applications: drug targeting transports, drug carrier, and diagnosis assistant system.

Sign in / Sign up

Export Citation Format

Share Document