Research on the Relationship between Drying Method and Binder Distribution by Tracing Technique

2014 ◽  
Vol 881-883 ◽  
pp. 1460-1463 ◽  
Author(s):  
Ying Li ◽  
Wen Juan Gu ◽  
Bang Gui He
Keyword(s):  
Rhodamine B ◽  
Vacuum Drying ◽  
Drying Method ◽  
Coated Paper ◽  
Directional Distribution ◽  
Infrared Drying ◽  
Base Paper ◽  
The Relationship

To observe binder distribution, and obtain the relationship between drying method and binder distribution in the z-direction, Rhodamine B was used to stain the binder and as the probe to characterize z-directional distribution of the binder using LSCM. The results implied that it was reliable and effective method using LSCM to characterize the z-directional distribution of binder and analyze the influence of dry method on binder migration. It could be concluded that the dry method was critical to binder distribution in coated paper and vacuum drying accelerated binder migration to the base paper, however vacuum drying made uniform binder distribution. Infrared drying was good to producing little binder migration towards the interior of base paper, but infrared drying was disadvantageous to even binder distribution.

Numerical Characterization of the Effect of Coating Solid on Binder Distribution

2014 ◽  
Vol 496-500 ◽  
pp. 388-391
Author(s):  
Ying Li ◽  
Wen Juan Gu ◽  
Bang Gui He
Keyword(s):  
Laser Scanning ◽  
Critical Surface ◽  
Coated Paper ◽  
Directional Distribution ◽  
Base Paper ◽  
Numerical Characterization ◽  
Liquid Absorption ◽  
Ink Setting ◽  
Coating Color

Binder is the essential component of coating color recipe. The amount and type of latex binder has a significant effect on both the structure and chemical-physical properties of coated paper, which affect critical surface properties, e.g., print gloss, roughness, ink setting rate via liquid absorption, and print mottle The main aim of this study was to investigate the effect of coating solid on the binder distribution in the method of numerical analysis by Laser Scanning Confocal Microscope (LSCM). In this study, Rhodamine B was used to stain the binder and as the probe to characterize z-directional distribution of the binder using LSCM. The results implied that it was reliable and effective method using LSCM to characterize the z-directional distribution of binder and analyze the influence of coating solid on binder distribution in the z-direction. It could be concluded that the coating solid played an important effect on binder distribution in coated paper and low coating solid with more water accelerated binder migration to the interior of base paper, sample with 60% coating solid is good to binder distribution and coating layer forming.

Study on the Effect of Drying on Binder Z- Directional Distribution in Coated Paper

2011 ◽  
Vol 233-235 ◽  
pp. 1608-1613
Author(s):  
Ying Li ◽  
Bei Hai He
Keyword(s):  
Laser Scanning ◽  
Visual Analysis ◽  
Coating Layer ◽  
Coated Paper ◽  
Laser Scanning Confocal Microscope ◽  
Directional Distribution ◽  
Force Microscopy ◽  
Atomic Force ◽  
Base Paper ◽  
Drying Condition

The main objective of this study was to investigate the effect of drying condition on the binder distribution and characterize the binder migration in the method of numerical and visual analysis by Scanning Electrical Microscopy (SEM), Atomic Force Microscopy (AFM), and Laser Scanning Confocal Microscope (LSCM). In this study, Rhodamine B was used to stain the binder and as the probe to characterize z-directional distribution of the binder using LSCM. The results implied that it was reliable and effective method using LSCM to characterize the z- directional distribution of binder and analyze the influence of dry condition on binder migration. It could be concluded that the dry temperature played an important effect on binder distribution in coated paper and high dry temperature accelerated binder migration to the coating surface, however low drying temperature made binder migrate towards the interior of base paper. Moderate drying is good to binder distribution and coating layer forming.

Research on the Influence of Drying Method on Ink Penetration of Coated Paper

2014 ◽  
Vol 884-885 ◽  
pp. 312-315
Author(s):  
Ying Li ◽  
Wen Juan Gu ◽  
Bang Gui He
Keyword(s):  
Surface Properties ◽  
Laser Scanning ◽  
Vacuum Drying ◽  
Drying Methods ◽  
Hot Air Drying ◽  
Coated Paper ◽  
Air Drying ◽  
Paper Properties ◽  
Infrared Drying ◽  
Hot Air

The aim of this study was to obtain the effect of drying methods on surface properties and ink penetration. Laser scanning confocal microscope (LSCM) was used in order to characterize the penetration depth through quantitative analysis. Fluorescent ink was used to observe and characterize ink penetration and distribution by LSCM. The results showed that the drying methods had an important role on the surface properties and ink penetration of coated paper. Infrared drying compared with vacuum drying and hot air drying was good to improve the paper properties, which resulted in low roughness, high gloss, low ink absorption and high paper surface efficiency. It could be concluded that infrared drying compared with vacuum drying and hot air drying resulted in the highest print density and better printability.

Economics of coated paper production made from deinked pulp

TAPPI Journal ◽  
2013 ◽  
Vol 12 (4) ◽  
pp. 19-27
Author(s):  
PATRICK HUBER ◽  
LAURENT LYANNAZ ◽  
BRUNO CARRÉ
Keyword(s):  
Mechanical Properties ◽  
Optimization Methods ◽  
Coating Process ◽  
Coated Paper ◽  
Paper Production ◽  
Base Paper

The fraction of deinked pulp for coated paper production is continually increasing, with some mills using 100% deinked pulp for the base paper. The brightness of the coated paper made from deinked pulp may be reached through a combination of more or less extensive deinking, compensated by appropriate coating, to optimize costs overall. The authors proposed general optimization methods combined with Kubelka-Munk multilayer calculations to find the most economical combination of deinking and coating process that would produce a coated paper made from DIP, at a given target brightness, while maintaining mechanical properties.

The Basic Study on the Relationship between the Physical Properties of Coating Pigment and the Coated Paper Quality

2011 ◽  
Vol 65 (12) ◽  
pp. 1293-1297
Author(s):  
Keiko Hashiguchi ◽  
Takehiro Yoshimatsu ◽  
Masanori Kawashima
Keyword(s):  
Physical Properties ◽  
Coated Paper ◽  
Basic Study ◽  
The Relationship ◽  
Paper Quality

scholarly journals Evaluation of Innovative Dried Purée from Jerusalem Artichoke—In Vitro Studies of Its Physicochemical and Health-Promoting Properties

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2644
Author(s):  
Jan Oszmiański ◽  
Sabina Lachowicz ◽  
Paulina Nowicka ◽  
Paweł Rubiński ◽  
Tomasz Cebulak
Keyword(s):  
Freeze Drying ◽  
Jerusalem Artichoke ◽  
Polyphenolic Compounds ◽  
Raw Material ◽  
Vacuum Drying ◽  
Drying Methods ◽  
Drying Method ◽  
Activity Inhibition ◽  
Health Promoting

The present study aimed to evaluate the effect of Jerusalem artichoke processing methods and drying methods (freeze drying, sublimation drying, vacuum drying) on the basic physicochemical parameters, profiles and contents of sugars and polyphenolic compounds, and health-promoting properties (antioxidant activity, inhibition of the activities of α-amylase, α-glucosidase, and pancreatic lipase) of the produced purée. A total of 25 polyphenolic compounds belonging to hydroxycinnamic phenolic acids (LC-PDA-MS-QTof) were detected in Jerusalem artichoke purée. Their average content in the raw material was at 820 mg/100 g dm (UPLC-PDA-FL) and was 2.7 times higher than in the cooked material. The chemical composition and the health-promoting value of the purées were affected by the drying method, with the most beneficial values of the evaluated parameters obtained upon freeze drying. Vacuum drying could offer an alternative to freeze drying, as both methods ensured relatively comparable values of the assessed parameters.

Research on the Relationship between Ink Permeability and Dot Gain of Different Paper

2013 ◽  
Vol 469 ◽  
pp. 318-321
Author(s):  
Yu Xiu Wang ◽  
Guang Xue Chen ◽  
Qi Feng Chen ◽  
Jing Lei Tai
Keyword(s):  
Offset Printing ◽  
Coated Paper ◽  
Dot Gain ◽  
Printing Paper ◽  
Inkjet Printer ◽  
The Relationship

In order to research the relationship between ink permeability and dot gain of different paper, four kinds of coated paper and two kinds of printing paper were chosen. Ink marks method was used to measure ink permeability of four kinds of coated paper and two kinds of common printing paper. After the ink marks were printed on each of the six kinds of paper, the length of them were measured, then the reciprocal of the ink marks length was multiplied by 1000 to obtain the value of the ink permeability. Inkjet printer was also used to print yellow GATF step-wedge simulating offset printing on the six kinds of paper, then using an optical densitometer to measure the dot gain. Conclusion shows that non-coated paper is higher in permeability than coated paper, which results in high percentage of dot gain.

Analysis of Coating Pore Structure and its Effect on Printability of Low Gloss Coated Paper

2011 ◽  
Vol 236-238 ◽  
pp. 1178-1182
Author(s):  
Yan Xin Liu ◽  
Yu Long Wang ◽  
Shen Tao Qin ◽  
Fei Fei Liu
Keyword(s):  
Pore Structure ◽  
Pore Size ◽  
Pore Volume ◽  
Coating Layer ◽  
Layer Structure ◽  
Capillary Absorption ◽  
Coated Paper ◽  
Base Paper ◽  
Small Pore ◽  
Coating Color

Coating pore structure of low gloss coated paper based on different pigment blends was analyzed using mercury intrusion method in this paper. The results show that pore size of coating layer structure of low gloss coated paper ranges from 20nm-500nm, and the range from 500nm-5000nm is mainly from base paper and interactions between coating color and base paper. Printability of coated paper can be well related with coating pore structure. Print gloss is strongly influenced by pore size and pore volume. Large pore diameters and small pore volume of coating layer structure can improve print gloss. Ink density increases with the increasing of pore diameter while the pore volume is kept constant. The increasing of pore volume of coat layer structure will improve capillary absorption and then improve ink absorption. The control of coating pore structure is very important for producing low gloss coated paper.

Sign in / Sign up

Export Citation Format

Share Document