Deoxidation and Inclusion Control in Stainless Steel Refining

2014 ◽  
Vol 968 ◽  
pp. 146-150
Author(s):  
Xiu Xiu Wang ◽  
Zhou Hua Jiang
Keyword(s):  
Stainless Steel ◽  
Large Scale ◽  
Scale Production ◽  
High Melting ◽  
High Melting Point ◽  
Large Scale Production ◽  
Deoxidation Product ◽  
New Type ◽  
Steel Refining ◽  
Inclusion Control

This paper analyzed the deoxidation principle of new-type compound deoxidizer, Si-Al-Fe alloy during stainless steel refining, summarized related studies on deoxidizer behavior, deoxidation products, alloying treatment by workers in the metallurgical in recent years, analyzed to solve a series of problems caused by deoxidation product with high melting point, and pointed out that it was a trend for large-scale production of "zero" inclusions steel or rendering inclusions harmless and functional.

Large Scale Production Planning in the Stainless Steel Industry

2011 ◽  
Vol 50 (9) ◽  
pp. 4893-4906 ◽  
Author(s):  
Janne Karelahti ◽  
Pekka Vainiomäki ◽  
Tapio Westerlund
Keyword(s):  
Stainless Steel ◽  
Production Planning ◽  
Steel Industry ◽  
Large Scale ◽  
Scale Production ◽  
Large Scale Production

Industrial Synthesis of Whisker Carbon Nanotubes

2016 ◽  
Vol 852 ◽  
pp. 514-519 ◽  
Author(s):  
Xiao Gang Sun ◽  
Zhi Wen Qiu ◽  
Long Chen ◽  
Man Yuan Cai ◽  
Zhi Peng Pang ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Large Scale ◽  
Chemical Vapor ◽  
Deposition Process ◽  
Scale Production ◽  
Multiwalled Carbon ◽  
Large Scale Production ◽  
New Type

Since the first observation of carbon nanotubes (CNTs) in 1991, their synthesis techniques has been extensively investigated. The chemical vapor deposition (CVD) process have attracted much attention because of both their versatility and easy large scale production for CNTs . This paper is focused on a catalytic CVD-based method for synthesis of whisker multiwalled carbon nanotubes (WMWCNTs). The new type of carbon nanotube is similar to the whisker. The morphology of the WMWCNTs are very different from traditional carbon nanotubes prepared by traditional chemical vapor deposition process. The traditional CNTs were twisted and entangled with each other. These suggested that there are a lot of deficiencies on the CNTs and are difficult to disperse in matrix materials. The as-produced WMWCNTs are very straight and not entangled with each other. The line structure means that WMWCNTs are easily dispersed in matrix materials than traditional CNTs which are twined together. The crystallinity of WMWCNTs increased to 96% which was much higher than traditional CNTs after graphitization treatment at 2800°C.

Development of a Novel Technology for New Generation of Non-Crimp Fabrics – Manufacturing and Simulation

2014 ◽  
Vol 936 ◽  
pp. 1821-1824 ◽  
Author(s):  
Paul Matthäi ◽  
Oliver Döbrich ◽  
Chokri Cherif
Keyword(s):  
Large Scale ◽  
Numerical Models ◽  
Scale Production ◽  
Reinforced Polymers ◽  
Construction Design ◽  
Technical Textiles ◽  
Large Scale Production ◽  
New Type ◽  
Warp Knitted Fabric ◽  
New Generation

In the field of technical textiles, Non-Crimp Fabrics (NCF) are increasingly used as fibre-reinforced polymers in automotive, aircraft and wind power industry. The rising consumption of multi-axial fabrics for fiber reinforcement requires new fabrics and process requirements for the large scale production. The development of a new type of NCF demands a convergence of diverse disciplines namely mechanics, construction design and chemistry. This research includes the manufacturing of novel adhesive bonded NCF. The characterization and of the warp-knitted fabric, selection of binding technology, the development of suitable application system and numerical models for simulation are the major focus areas.

I. S. A. Baud. Forms of Production and Women's Labour: Gender Aspects of Industrialisation in India and Mexico. New Delhi: Sage Publications. 1992. 321 pp.Hardbound. Price: Indian Rs 295.00.

1993 ◽  
Vol 32 (1) ◽  
pp. 129-131
Author(s):  
Naureen Talha
Keyword(s):  
Large Scale ◽  
Indian Society ◽  
New Delhi ◽  
Scale Production ◽  
Female Labour ◽  
Self Employment ◽  
Commodity Production ◽  
Large Scale Production ◽  
Mexican Society ◽  
Small Production

The literature on female labour in Third World countries has become quite extensive. India, being comparatively more advanced industrially, and in view of its size and population, presents a pictures of multiplicity of problems which face the female labour market. However, the author has also included Mexico in this analytical study. It is interesting to see the characteristics of developing industrialisation in two different societies: the Indian society, which is conservative, and the Mexican society, which is progressive. In the first chapter of the book, the author explains that he is not concerned with the process of industrialisation and female labour employed at different levels of work, but that he is interested in forms of production and women's employment in large-scale production, petty commodity production, marginal small production, and self-employment in the informal sector. It is only by analysis of these forms that the picture of females having a lower status is understood in its social and political setting.

An Efficient and Improved Process for the Synthesis of Itopride Hydrochloride and Trimethobenzamide Hydrochloride

2018 ◽  
Vol 15 (4) ◽  
pp. 572-575 ◽  
Author(s):  
Ponnusamy Kannan ◽  
Samuel I.D. Presley ◽  
Pallikondaperumal Shanmugasundaram ◽  
Nagapillai Prakash ◽  
Deivanayagam Easwaramoorthy
Keyword(s):  
Large Scale ◽  
Hydroxylamine Hydrochloride ◽  
Scale Production ◽  
One Pot ◽  
Hydrochloride Salt ◽  
Environmental Friendly ◽  
Large Scale Production ◽  
Non Ulcer Dyspepsia ◽  
Itopride Hydrochloride ◽  
Yield And Purity

Aim and Objective: Itopride is a prokinetic agent used for treating conditions like non-ulcer dyspepsia. Itopride is administered as its hydrochloride salt. Trimethobenzamide is used for treating nausea and vomiting and administered as its hydrochloride salt. The aim is to develop a novel and environmental friendly method for large-scale production of itopride and trimethobenzamide. Materials and Methods: Itopride and trimethobenzamide can be prepared from a common intermediate 4- (dimethylaminoethoxy) benzyl amine. The intermediate is prepared from one pot synthesis using Phyrdroxybenzaldehye and zinc dust and further reaction of the intermediate with substituted methoxy benzoic acid along with boric acid and PEG gives itopride and trimethobenzamide. Results: The intermediate 4-(dimethylaminoethoxy) benzylamine is prepared by treating p-hydroxybenzaldehyde and 2-dimethylaminoethyl chloride. The aldehyde formed is treated with hydroxylamine hydrochloride. The intermediate is confirmed by NMR and the purity is analysed by HPLC. Conclusion: Both itopride and trimethobenzamide were successfully synthesized by this method. The developed method is environmental friendly, economical for large-scale production with good yield and purity.

scholarly journals Cyanobacteria—From the Oceans to the Potential Biotechnological and Biomedical Applications

Marine Drugs ◽  
2021 ◽  
Vol 19 (5) ◽  
pp. 241
Author(s):  
Shaden A. M. Khalifa ◽  
Eslam S. Shedid ◽  
Essa M. Saied ◽  
Amir Reza Jassbi ◽  
Fatemeh H. Jamebozorgi ◽  
...  
Keyword(s):  
Bioactive Compounds ◽  
Biomedical Applications ◽  
Large Scale ◽  
Biological Activities ◽  
Scale Production ◽  
Pharmacological Activities ◽  
Large Scale Production ◽  
Marine Products ◽  
Hiv 1 ◽  
Successful Phase

Cyanobacteria are photosynthetic prokaryotic organisms which represent a significant source of novel, bioactive, secondary metabolites, and they are also considered an abundant source of bioactive compounds/drugs, such as dolastatin, cryptophycin 1, curacin toyocamycin, phytoalexin, cyanovirin-N and phycocyanin. Some of these compounds have displayed promising results in successful Phase I, II, III and IV clinical trials. Additionally, the cyanobacterial compounds applied to medical research have demonstrated an exciting future with great potential to be developed into new medicines. Most of these compounds have exhibited strong pharmacological activities, including neurotoxicity, cytotoxicity and antiviral activity against HCMV, HSV-1, HHV-6 and HIV-1, so these metabolites could be promising candidates for COVID-19 treatment. Therefore, the effective large-scale production of natural marine products through synthesis is important for resolving the existing issues associated with chemical isolation, including small yields, and may be necessary to better investigate their biological activities. Herein, we highlight the total synthesized and stereochemical determinations of the cyanobacterial bioactive compounds. Furthermore, this review primarily focuses on the biotechnological applications of cyanobacteria, including applications as cosmetics, food supplements, and the nanobiotechnological applications of cyanobacterial bioactive compounds in potential medicinal applications for various human diseases are discussed.

scholarly journals A Review on Additive Manufacturing Possibilities for Electrical Machines

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin
Keyword(s):  
Additive Manufacturing ◽  
Large Scale ◽  
Three Dimensional ◽  
Electrical Machines ◽  
Electromagnetic Properties ◽  
Scale Production ◽  
Performance Parameters ◽  
Large Scale Production ◽  
One Step ◽  
Manufacturing Techniques

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.

Sign in / Sign up

Export Citation Format

Share Document