An Improved TA Suppression Method for Coded PR Channels

2014 ◽  
Vol 979 ◽  
pp. 46-49
Author(s):  
Piya Kovintavewat ◽  
Santi Koonkarnkhai
Keyword(s):  
Viterbi Algorithm ◽  
Signal To Noise Ratio ◽  
Hard Disk Drives ◽  
Turbo Equalization ◽  
Soft Information ◽  
High Signal ◽  
High Quality ◽  
Suppression Method ◽  
Delay Operator ◽  
Better Than

Thermal asperity (TA) resulting from the collision between the slider and the asperity on a magnetic medium during read process can deteriorate the performance of hard disk drives (HDDs). Without TA detection and correction algorithms, the system performance can be unacceptable, depending on how severe the TA is. This paper presents an improved TA suppression method for coded partial response (PR) channels, which consists of two channels running in parallel. Specifically, one channel is matched to the target H(D), while the other is matched to the target H(D)G(D), where G(D) = 1 – D2 is a bandpass filter and D is a delay operator. The soft-output Viterbi algorithm (SOVA) detector in the H(D) channel yields the high-quality soft information in absence of the TA, while that in the G(D)H(D) channel produces the high-quality soft information in presence of the TA. Then, the overall soft information chosen from these two detectors, depending on if a TA is detected or not, is sent to the decoder according to the turbo equalization principle. Experimental results show that the proposed method performs better than the conventional and the previously proposed ones, when operating at high signal-to-noise ratio (SNR) region where a practical HDD works.

scholarly journals A new and homogeneous metallicity scale for Galactic classical Cepheids

2018 ◽  
Vol 616 ◽  
pp. A82 ◽  
Author(s):  
B. Proxauf ◽  
R. da Silva ◽  
V. V. Kovtyukh ◽  
G. Bono ◽  
L. Inno ◽  
...  
Keyword(s):  
Effective Temperature ◽  
Signal To Noise Ratio ◽  
High Signal ◽  
Physical Parameters ◽  
Classical Cepheids ◽  
Microturbulent Velocity ◽  
Metal Abundances ◽  
Pulsation Cycle ◽  
Intrinsic Error ◽  
Better Than

We gathered more than 1130 high-resolution optical spectra for more than 250 Galactic classical Cepheids. The spectra were collected with the optical spectrographs UVES at VLT, HARPS at 3.6 m, FEROS at 2.2 m MPG/ESO, and STELLA. To improve the effective temperature estimates, we present more than 150 new line depth ratio (LDR) calibrations that together with similar calibrations already available in the literature allowed us to cover a broad range in wavelength (5348 ≤ λ ≤ 8427 Å) and in effective temperature (3500 ≤ Teff ≤ 7700 K). This gives us the unique opportunity to cover both the hottest and coolest phases along the Cepheid pulsation cycle and to limit the intrinsic error on individual measurements at the level of ~100 K. As a consequence of the high signal-to-noise ratio of individual spectra, we identified and measured hundreds of neutral and ionized lines of heavy elements, and in turn, have the opportunity to trace the variation of both surface gravity and microturbulent velocity along the pulsation cycle. The accuracy of the physical parameters and the number of Fe I (more than one hundred) and Fe II (more than ten) lines measured allowed us to estimate mean iron abundances with a precision better than 0.1 dex. We focus on 14 calibrating Cepheids for which the current spectra cover either the entire or a significant portion of the pulsation cycle. The current estimates of the variation of the physical parameters along the pulsation cycle and of the iron abundances agree very well with similar estimates available in the literature. Independent homogeneous estimates of both physical parameters and metal abundances based on different approaches that can constrain possible systematics are highly encouraged.

scholarly journals A High-Granularity Timing Detector for the Phase-II upgrade of the ATLAS Calorimeter system: detector concept, description and R&D and beam test results

2021 ◽  
Vol 253 ◽  
pp. 11012
Author(s):  
H. Imam
Keyword(s):  
Signal To Noise Ratio ◽  
Liquid Argon ◽  
High Signal ◽  
Test Results ◽  
Forward Region ◽  
Test Beam ◽  
Pile Up ◽  
Flux Increase ◽  
Silicon Sensor ◽  
Better Than

The particle flux increase (pile-up) at the HL-LHC with luminosities of L = 7.5 × 1034 cm−2 s−1 will have a significant impact on the reconstruction of the ATLAS detector and on the performance of the trigger. The forward region and the end-cap where the internal tracker has poorer longitudinal track impact parameter resolution, and where the liquid argon calorimeter has coarser granularity, will be significantly affected. A High Granularity Time Detector (HGTD) is proposed to be installed in front of the LAr end-cap calorimeter for the mitigation of the pileup effect, as well as measurement of luminosity. It will have coverage of 2.4 to 4.0 from the pseudo-rapidity range. Two dual-sided silicon sensor layers will provide accurate timing information for minimum-ionizing particles with a resolution better than 30 ps per track (before irradiation), for assigning each particle to the correct vertex. The readout cells are about 1.3 mm × 1.3 mm in size, which leads to a high granular detector with 3 million channels. The technology of low-gain avalanche detectors (LGAD) with sufficient gain was chosen to achieve the required high signal-to-noise ratio. A dedicated ASIC is under development with some prototypes already submitted and evaluated. The requirements and general specifications of the HGTD will be maintained and discussed. R&D campaigns on the LGAD are carried out to study the sensors, the related ASICs and the radiation hardness. Both laboratory and test beam results will be presented.

scholarly journals Upper Bound on the Bit Error Probability of Systematic Binary Linear Codes via Their Weight Spectra

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Jia Liu ◽  
Mingyu Zhang ◽  
Chaoyong Wang ◽  
Rongjun Chen ◽  
Xiaofeng An ◽  
...  
Keyword(s):  
Upper Bound ◽  
Error Probability ◽  
Linear Codes ◽  
Signal To Noise Ratio ◽  
Additive White Gaussian Noise ◽  
High Signal ◽  
Binary Linear Codes ◽  
Enumerating Function ◽  
Bit Error Probability ◽  
Better Than

In this paper, upper bound on the probability of maximum a posteriori (MAP) decoding error for systematic binary linear codes over additive white Gaussian noise (AWGN) channels is proposed. The proposed bound on the bit error probability is derived with the framework of Gallager’s first bounding technique (GFBT), where the Gallager region is defined to be an irregular high-dimensional geometry by using a list decoding algorithm. The proposed bound on the bit error probability requires only the knowledge of weight spectra, which is helpful when the input-output weight enumerating function (IOWEF) is not available. Numerical results show that the proposed bound on the bit error probability matches well with the maximum-likelihood (ML) decoding simulation approach especially in the high signal-to-noise ratio (SNR) region, which is better than the recently proposed Ma bound.

scholarly journals Recent Helioseismological Results from Space: Solar p-mode Oscillations from IPHIR on the PHOBOS Mission

1990 ◽  
Vol 121 ◽  
pp. 279-288
Author(s):  
C. Fröhlich ◽  
T. Toutain ◽  
R.M. Bonnet ◽  
A.V. Bruns ◽  
J.P. Delaboudinière ◽  
...  
Keyword(s):  
Signal To Noise Ratio ◽  
Accurate Determination ◽  
Spectral Irradiance ◽  
High Signal ◽  
Line Shapes ◽  
Solar Spectral Irradiance ◽  
Evaluation Of Data ◽  
Very High ◽  
Better Than

AbstractIPHIR (Interplanetary Helioseismology by IRradiance measurements) is a solar irradiance experiment on the USSR planetary mission PHOBOS to Mars and its satellite Phobos. The experiment was built by an international consortium including PMOD/WRC, LPSP, SSD/ESA, KrAO and CRIP. The sensor is a three channel sunphotometer (SPM) which measures the solar spectral irradiance at 335, 500 and 865 nm with a precision of better than 1 part-per-million (ppm). It is the first experiment dedicated to the investigation of solar oscillations from space. The results presented here are from a first evaluation of data gathered during 160 days of the cruise phase of PHOBOS II, launched on July, 12th 1988. The long uninterrupted observation produces a spectrum of the solar p-mode oscillations in the 5-minute range with a very high signal-to-noise ratio, which allows an accurate determination of frequencies and line shapes of these modes.

Acquisition/Processing

2021 ◽  
Vol 40 (6) ◽  
pp. 460-463
Author(s):  
Lionel J. Woog ◽  
Anthony Vassiliou ◽  
Rodney Stromberg
Keyword(s):  
Model Building ◽  
Seismic Velocity ◽  
Signal To Noise Ratio ◽  
Velocity Model ◽  
High Signal ◽  
Processing Unit ◽  
High Quality ◽  
Near Surface ◽  
Velocity Model Building ◽  
Static Corrections

In seismic data processing, static corrections for near-surface velocities are derived from first-break picking. The quality of the static corrections is paramount to developing an accurate shallow velocity model, a model that in turn greatly impacts the subsequent seismic processing steps. Because even small errors in first-break picking can greatly impact the seismic velocity model building, it is necessary to pick high-quality traveltimes. Whereas various artificial intelligence-based methods have been proposed to automate the process for data with medium to high signal-to-noise ratio (S/N), these methods are not applicable to low-S/N data, which still require intensive labor from skilled operators. We successfully replace 160 hours of skilled human work with 10 hours of processing by a single NVIDIA Quadro P6000 graphical processing unit by reducing the number of human picks from the usual 5%–10% to 0.19% of available gathers. High-quality inferred picks are generated by convolutional neural network-based machine learning trained from the human picks.

scholarly journals Accurate Photometry of Saturated Stars Using the Point-spread-function Wing Technique with Spitzer

2022 ◽  
Vol 163 (2) ◽  
pp. 46
Author(s):  
Kate Y. L. Su ◽  
G. H. Rieke ◽  
M. Marengo ◽  
Everett Schlawin
Keyword(s):  
Point Spread Function ◽  
Signal To Noise Ratio ◽  
High Signal ◽  
Large Radius ◽  
Point Spread ◽  
Primary Sample ◽  
Spread Function ◽  
Optical Stability ◽  
Flux Calibration ◽  
Better Than

Abstract We report Spitzer 3.6 and 4.5 μm photometry of 11 bright stars relative to Sirius, exploiting the unique optical stability of the Spitzer Space Telescope point-spread function (PSF). Spitzer's extremely stable beryllium optics in its isothermal environment enables precise comparisons in the wings of the PSF from heavily saturated stars. These bright stars stand as the primary sample to improve stellar models, and to transfer the absolute flux calibration of bright standard stars to a sample of fainter standards useful for missions like JWST and for large ground-based telescopes. We demonstrate that better than 1% relative photometry can be achieved using the PSF wing technique in the radial range of 20″–100″ for stars that are fainter than Sirius by 8 mag (from outside the saturated core to a large radius where a high signal-to-noise ratio profile can still be obtained). We test our results by (1) comparing the [3.6]−[4.5] color with that expected between the WISE W1 and W2 bands, (2) comparing with stars where there is accurate K S photometry, and (3) also comparing with relative fluxes obtained with the DIRBE instrument on COBE. These tests confirm that relative photometry is achieved to better than 1%.

scholarly journals Helium Abundance in the Most Metal-Deficient Dwarf Galaxies

1999 ◽  
Vol 171 ◽  
pp. 390-392
Author(s):  
Y.I. Izotov
Keyword(s):  
Mass Fraction ◽  
Dwarf Galaxies ◽  
Signal To Noise Ratio ◽  
Emission Lines ◽  
High Signal ◽  
Weighted Mean ◽  
Ratio Spectrum ◽  
Abundance Determination ◽  
Better Than ◽  
The Continuum

AbstractThe high-quality long-exposure spectroscopic observations of the two most-metal deficient blue compact galaxies I Zw 18 and SBS 0335–052 are discussed. We confirm previous findings that underlying stellar absorption strongly influences the observed intensities of He I emission lines in the brightest NW component of I Zw 18, and hence this component should not be used for primordial He abundance determination. The effect of underlying stellar absorption, though present, is much smaller in the SE component. The extremely high signal-to-noise ratio spectrum (≥ 100 in the continuum) of the BCG SBS 0335–052 allows us to measure the helium mass fraction with precision better than 2% in nine different regions along the slit. The weighted mean of helium mass fraction in two most metal-deficient BCGs I Zw 18 and SBS 0335–052, Y=0.2462±0.0009, after correction for the He production in massive stars results in primordial He mass fraction Yp = 0.2452±0.0009.

scholarly journals Mapping Matrix Design and Improved Belief Propagation Decoding Algorithm for Rate-Compatible Modulation

Electronics ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 307
Author(s):  
Jinkun Zhu ◽  
Zhipeng Pan ◽  
Wei Liu ◽  
Jing Lei ◽  
Wei Li
Keyword(s):  
Belief Propagation ◽  
Complexity Analysis ◽  
Signal To Noise Ratio ◽  
Adaptive Transmission ◽  
Soft Information ◽  
High Signal ◽  
The One ◽  
Reliability Performance ◽  
Channel Environment ◽  
Matrix Design

Rate-compatible modulation (RCM) can achieve adaptive transmission in a variable channel environment. However, there are two problems with conventional RCM. Firstly, there is a large number of four rings in the mapping matrix of the conventional RCM, which blocks the delivery of messages in the decoding. Secondly, in the conventional decoding of RCM, the soft information of the last decoding will be discarded when cyclic redundancy check (CRC) is failed, which decreases the performance significantly. In order to address these two problems, in this paper, we propose a new method to construct a mapping matrix without four rings (MMwoFR) and an improved belief propagation (IBP) algorithm for RCM decoding. On the one hand, by using MMwoFR, the constructed matrix is able to prevent the existence of four rings which have much side influence of reliability performance. On the other hand, the IBP is able to make the most use of the soft information in RCM decoding. Simulation results show that using MMwoFR and IBP can bring at least 12% goodput gain for RCM at the high signal-to-noise ratio (SNR) region while maintaining the same performance in the low and moderate SNR regions. Moreover, complexity analysis shows that the new scheme has comparable complexity compared with a conventional RCM.

scholarly journals Complexity Reduction of Modied Per-Survivor Iterative Timing Recovery for Partial Response Channels

1970 ◽  
Vol 6 (2) ◽  
pp. 101-107
Author(s):  
Chanon Warisarn ◽  
Piya Kovintavewat ◽  
Pornchai Supnithi
Keyword(s):  
Viterbi Algorithm ◽  
Signal To Noise Ratio ◽  
Timing Recovery ◽  
Signal To Noise ◽  
Partial Response Channels ◽  
Cycle Slips ◽  
Reduced Complexity ◽  
Moderate Complexity ◽  
Recovery Schemes ◽  
Better Than

The problem of timing recovery operating at low signal-to-noise ratio has been recently solved by a modified per-survivor iterative timing recovery (MPS-ITR) proposed in [1], which jointly performs timing recovery, equalization, and error-correction decoding. In practice, this scheme exploits a splitpreamble strategy in conjunction with a per-survivor soft-output Viterbi algorithm equalizer to make it more robust against severe timing jitters or cycle slips. Although the MPS-ITR outperforms existing iterative timing recovery schemes [1], its complexity is extremely high. Therefore, this paper proposes a reduced-complexity MPS-ITR scheme (denoted as MPS-ITR-M) to make it more implementable in reallife applications. This is achieved by applying the M-algorithm [2] to the MPS-ITR. Numerical results show that at low-to-moderate complexity, the MPSITR- M performs better than other schemes.

A compact guided-wave EMAT with pulsed electromagnet for ferromagnetic tube inspection

2020 ◽  
Vol 64 (1-4) ◽  
pp. 951-958
Author(s):  
Tianhao Liu ◽  
Yu Jin ◽  
Cuixiang Pei ◽  
Jie Han ◽  
Zhenmao Chen
Keyword(s):  
Power Plants ◽  
Signal To Noise Ratio ◽  
Small Diameter ◽  
Performance Testing ◽  
Guided Wave ◽  
High Signal ◽  
Receiver Coil ◽  
Signal To Noise ◽  
Corrosion Defects

Small-diameter tubes that are widely used in petroleum industries and power plants experience corrosion during long-term services. In this paper, a compact inserted guided-wave EMAT with a pulsed electromagnet is proposed for small-diameter tube inspection. The proposed transducer is noncontact, compact with high signal-to-noise ratio and unattractive to ferromagnetic tubes. The proposed EMAT is designed with coils-only configuration, which consists of a pulsed electromagnet and a meander pulser/receiver coil. Both the numerical simulation and experimental results validate its feasibility on generating and receiving L(0,2) mode guided wave. The parameters for driving the proposed EMAT are optimized by performance testing. Finally, feasibility on quantification evaluation for corrosion defects was verified by experiments.

Sign in / Sign up

Export Citation Format

Share Document