Gangue as Flame Retardants for Flexible Poly(Vinyl Chloride)

2014 ◽  
Vol 983 ◽  
pp. 3-6
Author(s):  
Ming Gao ◽  
Chun Guang Song ◽  
Dan Rong ◽  
Yu Wen Ji
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Flame Retardant ◽  
Yield Stress ◽  
Flame Retardants ◽  
Oxygen Index ◽  
Flame Retardance ◽  
Limiting Oxygen Index ◽  
Poly Vinyl Chloride ◽  
Resultant Data

Gangue as flame retardant was used to PVC, the mechanical properties and flame retardance of the samples were studied. The resultant data show that gangue little effect on the mechanical properties of the sample, especially tensile strength, yield stress, and 10% of gangue obtained good flame retardance. PVC treated with flame-retardants showed a high limiting oxygen index, char yield, which indicated that the flame retardance of the treated PVC was improved.

Coal Ash as Flame Retardants for Flexible Poly (Vinyl Chloride)

2014 ◽  
Vol 1056 ◽  
pp. 62-65
Author(s):  
Xue Jun Ren ◽  
Chun Guang Song ◽  
Ming Gao
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Flame Retardants ◽  
Oxygen Index ◽  
Coal Ash ◽  
Decomposition Temperature ◽  
Flame Retardance ◽  
Limiting Oxygen Index ◽  
Poly Vinyl Chloride ◽  
Resultant Data

Coal ash as flame retardant was used to PVC, the mechanical properties and flame retardance of the samples were studied. The resultant data show that coal ash better effect on the mechanical properties of the sample, especially tensile strength, impact strength, and 4% of coal ash obtained good flame retardance. PVC treated with flame-retardants showed a high limiting oxygen index, high decomposition temperature, which indicated that the flame retardance of the treated PVC was improved.

Flammability and mechanical properties of poly(styrene–butadiene–styrene) copolymer–containing intumescent flame retardants

2015 ◽  
Vol 30 (6) ◽  
pp. 816-826 ◽  
Author(s):  
Yiren Huang ◽  
Jianwei Yang ◽  
Zhengzhou Wang
Keyword(s):  
Mechanical Properties ◽  
Flame Retardant ◽  
Flame Retardants ◽  
Oxygen Index ◽  
Limiting Oxygen Index ◽  
Styrene Butadiene Styrene ◽  
Flame Retardant Properties ◽  
Intumescent Flame Retardants ◽  
Styrene Butadiene ◽  
Butadiene Styrene

Flame-retardant properties of ammonium polyphosphate (APP) and its two microcapsules, APP with a shell of melamine–formaldehyde (MF) resin (MFAPP) and APP with a shell of epoxy resin (EPAPP), were studied in styrene–butadiene–styrene (SBS). The results indicate that APP after the microencapsulation leads to an increase in limiting oxygen index in SBS compared with APP. When dipentaerythritol is incorporated into the SBS composites containing the APP microcapsules, a further improvement in flame retardancy of the composites is observed. The microencapsulation does not result in much improvement of mechanical properties. Moreover, the effect of a compatibilizer (SBS grafted with maleic anhydride) on flame-retardant and mechanical properties of SBS/APP composites was investigated.

Flame Retardation of Plain Weave Fabrics Made of Polyacrylonitrile Pre-Oxidized Yarns

2011 ◽  
Vol 175-176 ◽  
pp. 465-468 ◽  
Author(s):  
Lei Shi ◽  
Hua Wu Liu ◽  
Ping Xu ◽  
Dang Feng Zhao
Keyword(s):  
Mechanical Properties ◽  
Flame Retardant ◽  
Oxygen Index ◽  
Limiting Oxygen Index ◽  
Plain Weave ◽  
Weave Fabric ◽  
Short Period ◽  
Flame Retardation ◽  
Fabric Structures

Plain weave fabrics of polyacrylonitrile pre-oxidation yarns (PANOF) were prepared by small rapier loom. The flame retardation properties, mechanical properties and wear behaviors of PANOF plain weave fabrics were tested. The limiting oxygen index (LOI) of these PANOF plain weave fabric samples was 31%, which meets the criterion of flame-retardant fabrics. These fabrics neither melt nor shrunk when left in flame for a short period of time and the fabric structures were well maintained. Compared with flammable polyacrylonitrile fabrics, the polyacrylonitrile pre-oxidation fabrics exhibited excellent flame retardation properties, with satisfactory mechanical properties and comfortable handle.

The Flammability of Polyacrylonitrile and Its Copolymers I. The Flammability Assessment Using Pressed Powdered Polymer Samples

1993 ◽  
Vol 11 (5) ◽  
pp. 442-456 ◽  
Author(s):  
Jun Zhang ◽  
Michael E. Hall ◽  
A. Richard Horrocks
Keyword(s):  
Flame Retardant ◽  
Flame Retardancy ◽  
Flame Retardants ◽  
Oxygen Index ◽  
Char Residue ◽  
Acrylic Polymer ◽  
Limiting Oxygen Index ◽  
Convenient Means ◽  
Burning Rates ◽  
Polymer Flammability

This paper is the first in a series of four which investigates the burning behaviour and the influence of flame retardant species on the flam mability of fibre-forming polymer and copolymers of acrylonitrile. A pressed powdered polymer sheet technique is described that enables a range of polymer compositions in the presence and absence of flame retardants to be assessed for limiting oxygen index, burning rate and char residue deter minations. The method offers a rapid, reproducible and convenient means of screening possible flame retardant systems, and LOI values compare favourably with those of films and fabrics comprising the same polymeric type. Burning rates, however, are sensitive to changes in physical sample character such as form (film vs. powder sheet) and density. Thus the technique forms an excellent basis for the generation of burning data which will enable comprehensive studies of acrylic polymer flammability and flame retardancy to be undertaken.

Flammability and Mechanical Properties of Toughened Phenolic Foams Containing Nano MP, Nano MCA, and their Capsules

2013 ◽  
Vol 791-793 ◽  
pp. 72-75
Author(s):  
Zheng Zhou Wang ◽  
Shao Hong Xu ◽  
Yan Ping Deng
Keyword(s):  
Mechanical Properties ◽  
Polyethylene Glycol ◽  
Flame Retardant ◽  
Oxygen Index ◽  
Limiting Oxygen Index

Flammability of polyethylene glycol toughened phenolic (PF) foams containing nanomelamine phosphate (NMP), nanomelamine cyanurate (NMCA) or their capsules was studied by limiting oxygen index (LOI). The effect of the nanoparticles and their micro counterparts on flame retardant and mechanical properties of the toughened foams is compared.

Hyperbranched Polymers as Novel Flame Retardant Material

2009 ◽  
Vol 87-88 ◽  
pp. 271-275
Author(s):  
Jyotishmoy Borah ◽  
Guang Yi Lin ◽  
Chuan Sheng Wang
Keyword(s):  
Flame Retardant ◽  
Oxygen Index ◽  
Linear Polymers ◽  
Limiting Oxygen Index ◽  
Flame Retardant Property ◽  
Poly Vinyl Chloride ◽  
Nucleophilic Displacement ◽  
Hyperbranched Polyether ◽  
Dose Levels ◽  
Sulfur Containing

A series of aromatic hyperbranched polyethers have been synthesized from cyanuric chloride and diols by using nucleophilic displacement polymerization technique. The synthesized sulfur containing polyether was blended with commercially available low density polyethylene (LDPE) and plasticized poly(vinyl chloride) separately to improve the flame retardant property of those linear polymers. The flame retardancy of blends at different dose levels of the hyperbranched polyether with those linear polymers was investigated by measurement of limiting oxygen index (LOI) value and thermogravimetric analysis. The LOI values and TG analysis of these blends indicated that the hyperbranched polyether act as flame retardant additive.

Preparation and Properties of Halogen-Free Flame Retardant Polyurethane Foams

2011 ◽  
Vol 418-420 ◽  
pp. 540-543 ◽  
Author(s):  
Ding Meng Chen ◽  
Yi Ping Zhao ◽  
Jia Jian Yan ◽  
Li Chen ◽  
Zhi Zhi Dong ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Flame Retardants ◽  
Oxygen Index ◽  
Mechanical Analysis ◽  
Polyurethane Foams ◽  
Dimethyl Methylphosphonate ◽  
Limiting Oxygen Index ◽  
Layer Composite ◽  
Halogen Free ◽  
Thermal Stable

Polyurethane foams (PUFs) filled with several halogen-free flame retardants and composite halogen-free flame retardants were prepared. The flame retardant, thermal stable and mechanical properties of the PUFs were investigated. The results of limiting oxygen index (LOI) and thermogravimetric analysis (TGA) revealed that PUFs filled with dimethyl methylphosphonate (DMMP) had better flame retardancy compared with other flame retardants and DMMP degraded at a low temperature to form several phosphorated acids which accelerated the formation of char layer. Composite flame retardant of DMMP and melamine (MA) had a synergistic effect between phosphorus and nitrogen. The combination of DMMP and MA slightly altered the density of the PUFs. Results from the mechanical analysis revealed that with the increase in concentration of MA in the composite flame retardant of DMMP and MA, the tensile strength of PUFs reduced firstly and then increased up to a constant.

scholarly journals Comparative Study on the Flame-Retardant Properties and Mechanical Properties of PA66 with Different Dicyclohexyl Hypophosphite Acid Metal Salts

Polymers ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 1956 ◽  
Author(s):  
Heng Zhang ◽  
Junliang Lu ◽  
Hongyan Yang ◽  
Jinyan Lang ◽  
Heng Yang
Keyword(s):  
Mechanical Properties ◽  
Flame Retardant ◽  
Flame Retardants ◽  
Raw Materials ◽  
Testing Machine ◽  
Metal Salts ◽  
Optimal Dosage ◽  
Limiting Oxygen Index ◽  
Combustion Properties ◽  
Flame Retardant Properties

Three metal salts of dicyclohexyl hypophosphite, namely dicyclohexyl aluminum hypophosphite (ADCP), dicyclohexyl magnesium hypophosphite (MDCP), and dicyclohexyl zinc hypophosphite (ZDCP), were synthesized. These flame retardants were subjected to thermogravimetric analysis, and the results showed that ADCP and ZDCP had higher thermal stabilities than MDCP. They were then separately mixed with polyamide 66 (PA66)to prepare composite materials, of which the combustion properties were determined by the limiting oxygen index method and horizontal/vertical burning experiments. The mechanical properties of the materials were further evaluated using an electronic universal testing machine. The results showed that all the three flame retardants exerted a flame-retardant effect on PA66, but the flame-retardant effect of MDCP was inferior to those of ADCP and ZDCP. All the composites also showed similar mechanical properties. Among the three flame retardants, ADCP had the best overall performance for raw materials, showing good flame-retardant properties while maintaining the mechanical properties of the raw materials. The optimal dosage of ADCP was 15 wt %, at which a V-0 rating in the vertical burning test (UL 94 test) can be obtained.

scholarly journals Preparation of Flame Retardant Modified with Titanate for Asphalt Binder

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Bo Li ◽  
Jianxun Liu ◽  
Feng Han ◽  
Xiaoling Li ◽  
Liangying Li ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Flame Retardants ◽  
Performance Test ◽  
Oxygen Index ◽  
Orthogonal Experiment ◽  
Asphalt Binder ◽  
Complex Nature ◽  
Index Test ◽  
Limiting Oxygen Index ◽  
Low Dosage

Improving the compatibility between flame retardant and asphalt is a difficult task due to the complex nature of the materials. This study explores a low dosage compound flame retardant and seeks to improve the compatibility between flame retardants and asphalt. An orthogonal experiment was designed taking magnesium hydroxide, ammonium polyphosphate, and melamine as factors. The oil absorption and activation index were tested to determine the effect of titanate on the flame retardant additive. The pavement performance test was conducted to evaluate the effect of the flame retardant additive. Oxygen index test was conducted to confirm the effect of flame retardant on flame ability of asphalt binder. The results of this study showed that the new composite flame retardant is more effective in improving the compatibility between flame retardant and asphalt and reducing the limiting oxygen index of asphalt binder tested in this study.

Flammability and Mechanical Properties of Toughened Phenolic Foams Containing APP, MP and MCA

2013 ◽  
Vol 671-674 ◽  
pp. 1809-1812
Author(s):  
Shao Hong Xu ◽  
Xiao Yu Sui ◽  
Zheng Zhou Wang
Keyword(s):  
Mechanical Properties ◽  
Thermal Decomposition ◽  
Flame Retardant ◽  
Oxygen Index ◽  
Ammonium Polyphosphate ◽  
Limiting Oxygen Index ◽  
Melamine Cyanurate ◽  
Melamine Phosphate

Flammability of toughened phenolic (PF) foams containing ammonium polyphosphate (APP), melamine phosphate (MP) or melamine cyanurate(MCA) was studied by limiting oxygen index (LOI). The LOI values show that APP or MP is an effient flame retardant than MCA in the toughened PF foams. The thermal decomposition and mechanical properties of the phenolic foams were also investigated.

Sign in / Sign up

Export Citation Format

Share Document