One Step Synthesis of Graphene-Like Structures by Carbonization of some Carbohydrates in Molten Salt Media

2019 ◽  
Vol 59 ◽  
pp. 166-179 ◽  
Author(s):  
Betül Gürünlü ◽  
Mahmut Bayramoğlu
Keyword(s):  
Molten Salt ◽  
Photoelectron Spectroscopy ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Hummers Method ◽  
Environmental Friendly ◽  
One Step ◽  
Xrd Patterns ◽  
Molten Salt System

Graphene is one of the most promising materials discovered in last years. It is usually synthesized by Hummers’ method requiring the usage of many chemicals. As an alternative to traditional methods, in this study a bottom-up synthesis method was developed from various saccharides such as starch, mannose, cellulose, fructose, arabinose, and xylose by carbonization at 600 °C to 800 °C in LiCl/KCl molten salt system. The proposed method is environmental friendly and economic. Graphene yields at 600 °C are higher than at 800 °C. Graphene products give peak at 2θ = 23° on the X-Ray Diffraction (XRD) patterns. As the temperature is increased, amorph structure is observed on the XRD patterns. Raman spectroscopy results show that intensity of D band peak over intensity of G band peak (ID/IG) values of graphene products synthesized from arabinose and cellulose at 600 °C, graphene from arabinose synthesized at 800 °C are 0.76, 0.65 and 0.85 respectively, which show that these products are few-layered. According to X-ray photoelectron spectroscopy (XPS) results, graphene products synthesized at 600 °C have higher carbon content than those synthesized at 800 °C.

SYNTHESIS OF ANISOTROPIC LEAD TITANATE POWDERS FOR TEMPLATED GRAIN GROWTH OF TEXTURED PIEZOELECTRIC CERAMICS

2010 ◽  
Vol 17 (02) ◽  
pp. 159-164 ◽  
Author(s):  
S. MA ◽  
J. Y. H. FUH ◽  
Y. F. ZHANG ◽  
L. LU
Keyword(s):  
Molten Salt ◽  
Heating Temperature ◽  
Synthesis Method ◽  
Processing Parameters ◽  
Molten Salt Synthesis ◽  
X Ray Diffraction ◽  
Thermal Synthesis ◽  
Flux Synthesis ◽  
One Step ◽  
Molten Salt System

Needle-shaped PbTiO3 (PT) template particles were successfully synthesized using two different types of approaches, molten salt synthesis (MSS) and thermal synthesis method. In eutectic NaCl–KCl molten salt system, homogeneous and nonagglomerated needle-shaped PT particles were produced from PbO and needle-like TiO2 compound heated at 800–850°C for 2 h. The effect of heating temperature on the morphology of formed powders was studied in order to identify the optimum processing parameters. The template formation mechanism is discussed. Using thermal synthesis method, comparable needle-shaped PT crystalline particles were also obtained in one step. Plate-shaped PT powders were derived via flux synthesis. The effect of additives such as MnCl2 and LiF on the morphology of derived PT was studied. Adding a certain amount of MnCl2 led to the formation of well-defined plate-shaped PT particles. The structure and morphology of synthesized powders were characterized by means of X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM).

scholarly journals Synthesis of Ce1−xPdxO2−δ Solid Solution in Molten Nitrate

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 640
Author(s):  
Hideaki Sasaki ◽  
Keisuke Sakamoto ◽  
Masami Mori ◽  
Tatsuaki Sakamoto
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Solid Solutions ◽  
Photoelectron Spectroscopy ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Co Precipitation ◽  
Ionic States

CeO2-based solid solutions in which Pd partially substitutes for Ce attract considerable attention, owing to their high catalytic performances. In this study, the solid solution (Ce1−xPdxO2−δ) with a high Pd content (x ~ 0.2) was synthesized through co-precipitation under oxidative conditions using molten nitrate, and its structure and thermal decomposition were examined. The characteristics of the solid solution, such as the change in a lattice constant, inhibition of sintering, and ionic states, were examined using X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM−EDS), transmission electron microscopy (TEM)−EDS, and X-ray photoelectron spectroscopy (XPS). The synthesis method proposed in this study appears suitable for the easy preparation of CeO2 solid solutions with a high Pd content.

Preparation of nanocellulose by hydrolysis with ionic liquids and two-step hydrolysis with ionic liquids and enzymes

2021 ◽  
Vol 116 ◽  
pp. 5-14
Author(s):  
Marta Babicka ◽  
Magdalena Woźniak ◽  
Kinga Szentner ◽  
Sławomir Borysiak ◽  
Krzysztof Dwiecki ◽  
...  
Keyword(s):  
Ionic Liquids ◽  
Degree Of Crystallinity ◽  
Cellulolytic Enzyme ◽  
X Ray Diffraction ◽  
Production Methods ◽  
Step Process ◽  
X Ray ◽  
One Step ◽  
Xrd Patterns ◽  
The One

The aim of this study was to compare parameters of nanocellulose obtained by two different procedures: hydrolysis with ionic liquids (1-allyl-3-methylimidazolium chloride and 1-ethyl-3-methylimidazolium acetate) and hydrolysis with ionic liquids in combination with hydrolysis using a cellulolytic enzyme from Trichoderma reesei. Avicel cellulose was treated with two ionic liquids: 1-allyl-3-methylimidazolium chloride (AmimCl) and 1-ethyl 3-methylimidazolium acetate (EmimOAc). In the two-step hydrolysis cellulose after treatment with ionic liquids was additionally hydrolyzed with a solution of enzymes. In order to characterize the obtained material, the following analyses were used: infrared spectroscopy, X-ray diffraction and dynamic light scattering. The results indicated that cellulose obtained by two-step nanocellulose production methods (first hydrolysis with ionic liquids and then with enzymes) showed similar parameters (particle size, XRD patterns and degree of crystallinity) as the material after the one-step process, i.e. hydrolysis with ionic liquids.

scholarly journals Surface Study of CuO Nanopetals by Advanced Nanocharacterization Techniques with Enhanced Optical and Catalytic Properties

Nanomaterials ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 1298 ◽  
Author(s):  
Muhammad Arif Khan ◽  
Nafarizal Nayan ◽  
Shadiullah Shadiullah ◽  
Mohd Khairul Ahmad ◽  
Chin Fhong Soon
Keyword(s):  
Photoelectron Spectroscopy ◽  
Catalytic Properties ◽  
Average Length ◽  
Tem Analysis ◽  
X Ray ◽  
Surface Study ◽  
Transmission Electron ◽  
One Step ◽  
Controlled Morphology ◽  
Xrd Patterns

In the present work, a facile one-step hydrothermal synthesis of well-defined stabilized CuO nanopetals and its surface study by advanced nanocharacterization techniques for enhanced optical and catalytic properties has been investigated. Characterization by Transmission electron microscopy (TEM) analysis confirmed existence of high crystalline CuO nanopetals with average length and diameter of 1611.96 nm and 650.50 nm, respectively. The nanopetals are monodispersed with a large surface area, controlled morphology, and demonstrate the nanocrystalline nature with a monoclinic structure. The phase purity of the as-synthesized sample was confirmed by Raman spectroscopy and X-ray diffraction (XRD) patterns. A significantly wide absorption up to 800 nm and increased band gap were observed in CuO nanopetals. The valance band (VB) and conduction band (CB) positions at CuO surface are measured to be of +0.7 and −1.03 eV, respectively, using X-ray photoelectron spectroscopy (XPS), which would be very promising for efficient catalytic properties. Furthermore, the obtained CuO nanopetals in the presence of hydrogen peroxide ( H 2 O 2 ) achieved excellent catalytic activities for degradation of methylene blue (MB) under dark, with degradation rate > 99% after 90 min, which is significantly higher than reported in the literature. The enhanced catalytic activity was referred to the controlled morphology of monodispersed CuO nanopetals, co-operative role of H 2 O 2 and energy band structure. This work contributes to a new approach for extensive application opportunities in environmental improvement.

Preparation, Characterization of Nonmetal Doped TiO2 Nanoparticles with their Excellent Photocatalystic Properties

2011 ◽  
Vol 183-185 ◽  
pp. 2254-2257
Author(s):  
Ying Wei Wang ◽  
Yu Fei Li ◽  
Pei Han Yang
Keyword(s):  
Photoelectron Spectroscopy ◽  
Photocatalytic Performance ◽  
Anatase Phase ◽  
Titania Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
One Step ◽  
Doped Titania ◽  
Nonmetal Doping

Nonmetal (S, P) doped titania nanoparticles were synthesized by a one step hydrothermal method. These samples were calcined with different temperature, the sample exist in anatase phase has much higher photocatalytic activity for methylene blue (MB) degradation. The visible response and the higher UV activity of the different nonmetal doped TiO2make it possible to utilize solar energy efficiently to execute photocatalysis processes. The resulting materials were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), etc. It can conclude the nonmetal doping TiO2proves to be more suitable to improve the photocatalytic performance.

Activation of persulfate by heterogeneous catalyst ZnCo2O4–RGO for efficient degradation of bisphenol A

2020 ◽  
Vol 98 (12) ◽  
pp. 771-778
Author(s):  
Xin Chang ◽  
Xiangyang Xu ◽  
Zhifeng Gao ◽  
Yingrui Tao ◽  
Yixuan Yin ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Bisphenol A ◽  
Photoelectron Spectroscopy ◽  
X Ray Diffraction ◽  
Reaction Conditions ◽  
X Ray ◽  
Transmission Electron ◽  
Nucleation Sites ◽  
One Step ◽  
Application Potential

A nanocomposite, reduced graphene oxide (RGO) modified ZnCo2O4 (ZnCo2O4–RGO) was synthesized via one-step solvothermal method for activating persulfate (PS) to degrade bisphenol A (BPA). The morphology and structure of the nanocomposite were identified by X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. RGO provides nucleation sites for ZnCo2O4 to grow and inhibits the agglomeration of the nanoparticles. The influence of different reaction conditions on the oxidation of BPA catalyzed by ZnCo2O4–RGO was investigated, including the content of RGO, the dosage of catalyst, the concentration of humic acid (HA), anions in the environment, the reaction temperature, and pH. BPA can be totally degraded within 20 min under optimized reaction conditions. The presence of HA, Cl−, and NO3− only has a slight effect on the oxidation of BPA, whereas the presence of either H2PO4− or HCO3− can greatly inhibit the reaction. ZnCo2O4–RGO shows good cycling stability and practical application potential. A reaction mechanism of the degradation of BPA was also explored.

A Novel Synthesis of CaWO4:Eu3+ Flower Like Microcrystals in Ethanol/Water Mixed System and Characterization

2012 ◽  
Vol 531-532 ◽  
pp. 512-518 ◽  
Author(s):  
Ye Qing Chen ◽  
Joo Hyun Lee ◽  
Sung Wook Park ◽  
Byung Kee Moon ◽  
Byung Chun Choi ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Hydrothermal Process ◽  
Volume Ratio ◽  
Mixed System ◽  
Mixed Solution ◽  
Photoluminescence Properties ◽  
X Ray Diffraction ◽  
High Concentration ◽  
X Ray ◽  
Xrd Patterns

In this paper, we report a successful synthesis of CaWO4:Eu3+ phosphor via an ethanol assisted hydrothermal process. X-ray diffraction (XRD) patterns, X-ray photoelectron spectroscopy (XPS) and field emission scanning electron microscope (FE-SEM) were used to investigate the growth of the products. The water and ethanol volume ratio is found to have extraordinary effect on the particle size and morphological appearance. Flower like ~ 1µm superstructures can be obtained with mixed solution of w/e of 50/50 at 120 °C hydrothermal sysnthesis for 12 h. High concentration of ethanol in aqueous solution was discovered to have a tendency in limiting the interaction between the small particles for crystallization. Temperature and time experiments were also performed to further investigate the growth mechanism of the ethanol assisted hydrothermal process. The photoluminescence properties of flower like CaWO4:Eu3+ has also been investigated.

Photoconversion of CO2 using copper-modified titanium dioxide nanoparticles

2011 ◽  
Vol 76 (11) ◽  
pp. 1335-1346 ◽  
Author(s):  
Jing Wei ◽  
Xin Tan ◽  
Tao Yu ◽  
Lin Zhao
Keyword(s):  
Titanium Dioxide ◽  
Photoelectron Spectroscopy ◽  
Titanium Dioxide Nanoparticles ◽  
Sol Gel ◽  
Chemical Properties ◽  
High Photocatalytic Activity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Illumination ◽  
One Step

A series of copper-modified titanium dioxide (Cu/TiO2) nanoparticles were synthesized via one-step sol-gel method. The crystal structure and chemical properties were characterized using X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The Cu/TiO2nanoparticles were applied to CO2photoconversion and the yield of formaldehyde was used to evaluate the photocatalytic performance. The optimum amount of copper modifying was 0.6 wt.% and the yield of formaldehyde was 946 μmol/gcatunder UV illumination for 6 h. 20 wt.% Cu/TiO2also performed a high photocatalytic activity, which yielded 433 μmol/gcatformaldehyde under UV illumination for 6 h.

Electrodepositing Ir Film at Constant Current in NaCl-KCl Molten Salts

2013 ◽  
Vol 652-654 ◽  
pp. 1834-1837
Author(s):  
Jian Gang Qian ◽  
Hai Ting Li ◽  
Peng Rui Li ◽  
Tian Zhao
Keyword(s):  
Molten Salt ◽  
Molten Salts ◽  
Film Surface ◽  
Constant Current ◽  
Process Conditions ◽  
X Ray Diffraction ◽  
X Ray ◽  
Energy Dispersive Spectroscope ◽  
Molten Salt System ◽  
Deposition Current Density

In this study, the dense and well-integrated Ir films were electrodeposited on Pt substrate at a constant current process in the NaCl-KCl molten salt system containing IrCl3. The morphology and constitution of the Ir films at different process conditions were examined by scanning electron microscope (SEM), energy dispersive spectroscope (EDS) and X-ray diffraction (XRD) respectively. The results showed that IrCl3 concentration had significantly influenced the surface morphology of the Ir film. The particles of the deposition film surface became lager with increasing the fraction of IrCl3 and gradually decreased with increasing the temperature. However, the film quality decreased due to the formation of some tiny holes when further increasing the temperature. The particle size decreased gradually with the increase of deposition current density. The addition of CsCl could not only reduce the molten salt temperature but also increase the deposition rate of Ir.

scholarly journals Effect of reaction parameters on WOx nanostructures by the solvothermal process

2021 ◽  
Vol 4 (3) ◽  
pp. 234-244
Author(s):  
Amelia Olivas Sarabia ◽  
Marlene N Cardoza-Contreras ◽  
Gonzalo Lastra Medina ◽  
Marcos Alan Cota Leal ◽  
Selene Sepúlveda Guzmán
Keyword(s):  
Acetic Acid ◽  
Reaction Time ◽  
Photoelectron Spectroscopy ◽  
Solvothermal Method ◽  
Ultra Violet ◽  
Oxidation States ◽  
X Ray Diffraction ◽  
Reaction Parameters ◽  
X Ray ◽  
Xrd Patterns

In this work, nanowires and nanorods of WOx have been synthesized by the solvothermal method. The effect of reaction time and acetic acid as solvent were studied. X-ray diffraction (XRD) patterns showed the monoclinic WO2.72, WO2.79, and orthorhombic WO3 crystalline structures. Scanning Electron Microscopy (SEM) and High-Resolution Transmission Electronic Microscopy (HRTEM) images presented nanostructures such as nanowires and nanorods at different sizes. Band gap energies were supplied by Ultra Violet visible (UV-vis) absorption spectra. The Photoluminescence (PL) spectra exhibited three emission peaks in the blue zone at 440, 460, and 484 nm. X-ray Photoelectron Spectroscopy (XPS) was used to calculate W6+, W5+, and W4+ oxidation states. The results showed that increasing the reaction time from 10 h to 24 h affected the crystalline structure from monoclinic to orthorhombic. Moreover, with the addition of acetic acid as solvent, the crystal structure is not affected but stabilizes the monoclinic phase in the course of time.

Sign in / Sign up

Export Citation Format

Share Document