A Study on Chip Breakage in Mini-Pore Vibration Drilling for Hard-to-Cut Material of Austenitic Stainless Steel

2010 ◽  
Vol 455 ◽  
pp. 548-552
Author(s):  
J.S. Zhou ◽  
Bang Yan Ye ◽  
Xing Yu Lai
Keyword(s):  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Cutting Parameters ◽  
Processing Parameters ◽  
Chip Breaking ◽  
Vibration Drilling ◽  
On Chip ◽  
Vibration Parameters ◽  
The Relationship ◽  
Chip Breakage

This research aims to improve the method of Mini-pore Drilling superimposed an axis vibration for hard-to-cut material of Austenitic Stainless Steel 1Cr18Ni9Ti, as well as to make it easier for the chips to be discharged. A mathematical model of vibration drilling is presented, and the relationship between the vibration parameters and cutting parameters to generate little and short broken-chips in vibration drilling is investigated, analyzed and verified by experiments. The results show that when the processing parameters meet the conditions given in this article, stable and reliable chip-breaking can be achieved. The results provide a theoretical guidance to achieve chip-breaking in mini-pore vibration drilling for hard-to-cut material.

scholarly journals Experimental study on chip shape in ultrasonic vibration–assisted turning of 304 austenitic stainless steel

2019 ◽  
Vol 11 (8) ◽  
pp. 168781401987089 ◽  
Author(s):  
Yingshuai Xu ◽  
Zhihui Wan ◽  
Ping Zou ◽  
Qinjian Zhang
Keyword(s):  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Ultrasonic Vibration ◽  
Process Parameters ◽  
Chip Morphology ◽  
Cutting Parameters ◽  
Chip Shape ◽  
304 Austenitic Stainless Steel ◽  
On Chip ◽  
The Impact

There are many problems and physical phenomena in turning process, like machined surface quality, cutting force, tool wear, and so on. These factors and the chip shape of workpiece materials, which is an important aspect to study the mechanism of ultrasonic vibration–assisted turning, go hand in hand. This article first introduces the types and changes of chip, meanwhile the chip formation mechanism of ultrasonic vibration–assisted turning is studied and analyzed, and the turning experiments of 304 austenitic stainless steel with and without ultrasonic vibration are carried out. The difference of chip morphology between ultrasonic vibration–assisted turning and conventional turning is contrasted and analyzed from the macroscopic and microscopic point of view. The influence of process parameters on chip shape and the impact of chip shape on machining effect are also analyzed. Results indicate that when process parameters (vibration frequency, ultrasonic amplitude, and cutting parameters) are suitably selected, ultrasonic vibration–assisted turning can gain access to better chip shape and chip breaking effect than conventional turning. By contrast with conventional turning, phenomenon of serrated burr on the chip edge and the surface defects of chip in ultrasonic vibration–assisted turning have improved significantly. Moreover, it is found that superior chip morphology in ultrasonic vibration–assisted turning can be acquired under the circumstance of comparatively small cutting parameters (cutting speed, depth of cut, and feed rate); at the same time, preferable chips can also obtain ranking machining effect.

Estimation of Strain-Hardness Correlation in Cold-Forged Austenitic Stainless Steel

2014 ◽  
Vol 622-623 ◽  
pp. 179-185 ◽  
Author(s):  
Piotr Skubisz ◽  
Maciej Rumiński ◽  
Łukasz Lisiecki
Keyword(s):  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Strain Hardening ◽  
Effective Strain ◽  
Cold Deformation ◽  
Metal Flow ◽  
Fem Simulation ◽  
Large Head ◽  
The Relationship

The paper presents selected aspects of analysis cold micro-forging process of a screw made of austenitic stainless steel, concerning relation between strain and hardness. Strain hardening character of a material in consecutive forming operations was analyzed experimentally by the measurement of hardness distribution made on longitudinal axial sections of screws. The relationship between hardness and effective strain (hardness curve) was determined, which made it possible to obtain strain distributions in different regions of a material subjected to cold deformation on the basis of strain distribution numerically estimated with FEM simulation performed using QForm2D/3D commercial software. Conclusions were formulated concerning strain inhomogeneity and strain-hardening intensity with respect to the correlation between strain and hardness. It was also concluded, that nonuniformity of hardening rate in a bulk can lead to local variations in flow stress and eventually, to occurrence of the metal flow related defects, which was illustrated with a case study of cold heading of self-tapping screw of AISI 304Cu stainless steel, with large head diameter to shank diameter ratio. In order to validate the obtained results, the same method was used for analysis of hardness development in steel 19MnB4.

Experimental study on cutting force in ultrasonic vibration-assisted turning of 304 austenitic stainless steel

2020 ◽  
pp. 095440542095712
Author(s):  
Yingshuai Xu ◽  
Zhihui Wan ◽  
Ping Zou ◽  
Weili Huang ◽  
Guoqing Zhang
Keyword(s):  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Cutting Force ◽  
Ultrasonic Vibration ◽  
Cutting Parameters ◽  
Relational Model ◽  
Depth Of Cut ◽  
Technological Parameters ◽  
High Efficient ◽  
304 Austenitic Stainless Steel

The generation mechanism of cutting force in ultrasonic vibration assisted turning (UAT), with the composition and decomposition of cutting force is discussed in this paper, and the model of cutting force in UAT is established based on the mechanism of UAT. The force measuring test system is designed on the basis of the established machining system of UAT. The contrast experiments for turning the workpiece of 304 austenitic stainless steel are conducted with and without ultrasonic vibration under different technological parameters. Furthermore, the relational model and correlation between technological parameters and cutting force is obtained by regression analysis and variance analysis. Thereby, the mutual relation among these technological parameters is effectively controlled, which contributes to achieving the high quality and high efficient processing. Simultaneously, the influences of single technological parameter with the interaction between technological parameters on cutting force are researched and analyzed. The results prove that the cutting force is reduced significantly with the aid of ultrasonic vibration in turning and the choice of the proper ultrasonic amplitude, there is an optimal range of ultrasonic amplitudes as well. Meanwhile, the cutting parameters have great influence on cutting force, among which depth of cut has the superior influence, then the cutting speed, and feed rate has the minimal influence. Moreover, cutting parameters should not be too large, UAT is mainly used for semi-finishing or finishing at medium-low speed. UAT will get more ideal machining effect if cutting parameters are chosen properly.

Research on Chip Breaking Feature of the Micro Hole Vibration Drilling

2011 ◽  
Vol 694 ◽  
pp. 616-619
Author(s):  
Peng Zhang ◽  
Xing Yu Guo ◽  
Kang Pei Zhao ◽  
Li You Zhu
Keyword(s):  
Machining Process ◽  
Chip Breaking ◽  
Process Effects ◽  
Micro Drilling ◽  
Micro Hole ◽  
Breaking Mechanism ◽  
Vibration Drilling ◽  
On Chip ◽  
Hole Machining ◽  
Chip Removal

It is often one of the most important issues for chip breaking and chip removal problems in the hole machining process, especially for micro hole. The chip breaking mechanism of the vibration drilling is researched, and its chip breaking conditions is analyzed. The micro drilling experiments are carried to contrast the chip shape of common drilling and vibration one. It can be draw that the vibration drilling can realize the regular chip breaking, which is beneficial to chip removal in hole machining, the chip breaking feature is one of the fine process effects. This work further enriches the vibration drilling technology.

On Time-Temperature Parameters for Correlation of Creep-Rupture Data in Stainless Steel Weldments

1978 ◽  
Vol 100 (3) ◽  
pp. 319-332 ◽  
Author(s):  
W. E. White ◽  
Iain Le May
Keyword(s):  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Creep Rate ◽  
Creep Rupture ◽  
Rupture Time ◽  
Function Approach ◽  
Secondary Creep ◽  
Rupture Data ◽  
The Relationship ◽  
Secondary Creep Rate

The Manson-Haferd, Larson-Miller, and Orr-Sherby-Dorn time-temperature parameters were applied to creep-rupture data obtained from testing two batches of austenitic stainless steel weldments. It was found that none of these correlated the data satisfactorily. A new parameter, based on a modification of one proposed originally by Manson and by Goldhoff and Sherby, was found to adequately correlate the data. The Minimum-Commitment, Station-Function Approach of Manson and Ensign was also applied, the results of which supported those obtained from the analysis made using the parameters listed above. Finally, from the relationship between rupture-time and secondary creep-rate, it is suggested that the form of the rupture data may be useful in predicting the physical basis for creep.

Experimental Study on Nano-TiAlN Coated Carbide Tools in Turning Austenitic Stainless Steel

2012 ◽  
Vol 723 ◽  
pp. 247-251
Author(s):  
Hai Dong Yang ◽  
Zhi Ding
Keyword(s):  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Tool Life ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Dry Cutting ◽  
Processing Efficiency ◽  
Machined Surface ◽  
Tool Wear Mechanism ◽  
Coated Carbide

Austenitic stainless steel has poor cutting performance, especially when the inappropriate choice of tool materials and cutting parameters, cutting tool life will be shortened and the quality of machined surface is poor. In this paper, 0Cr18Ni9 stainless steel dry cutting tests had been done with nano-TiAlN coated carbide blade YGB202, the relationship between tool life and cutting speed, tool wear mechanism had been analyzed. In order to improve the processing efficiency and tool life, process parameters were optimized.

Influence of Cutting Parameters on Surface Morphology of Austenitic Stainless Steel after Turning

2014 ◽  
Vol 657 ◽  
pp. 23-27
Author(s):  
M. Grzegorz Krolczyk ◽  
Stanisław Legutko ◽  
W. Radoslaw Maruda
Keyword(s):  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Surface Morphology ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Cutting Parameters ◽  
Geometrical Parameters ◽  
Turning Process ◽  
Deep Well ◽  
Coated Carbide

The study presents the contribution in engineering of surfaces particularly in surface morphology of Austenitic Stainless Steels. The objective of the investigation was to determine the surface morphology of austenitic stainless steel after turning with coated carbide tool point. The investigation included geometrical parameters of SI for different cutting parameters in dry turning process of austenitic stainless steel. The study has been performed within a production facility during the production of electric motor parts and deep-well pumps.

scholarly journals Modeling and Optimization of Cutting Parameters during Machining of Austenitic Stainless Steel AISI304 Using RSM and Desirability Approach

2020 ◽  
Vol 65 (1) ◽  
pp. 10-26
Author(s):  
Septi Boucherit ◽  
Sofiane Berkani ◽  
Mohamed Athmane Yallese ◽  
Riad Khettabi ◽  
Tarek Mabrouki
Keyword(s):  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Cutting Force ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Desirability Approach ◽  
Optimization Of Cutting Parameters ◽  
Coated Carbide

In the current paper, cutting parameters during turning of AISI 304 Austenitic Stainless Steel are studied and optimized using Response Surface Methodology (RSM) and the desirability approach. The cutting tool inserts used in this work were the CVD coated carbide. The cutting speed (vc), the feed rate (f) and the depth of cut (ap) were the main machining parameters considered in this study. The effects of these parameters on the surface roughness (Ra), cutting force (Fc), the specific cutting force (Kc), cutting power (Pc) and the Material Removal Rate (MRR) were analyzed by ANOVA analysis.The results showed that f is the most important parameter that influences Ra with a contribution of 89.69 %, while ap was identified as the most significant parameter (46.46%) influence the Fc followed by f (39.04%). Kc is more influenced by f (38.47%) followed by ap (16.43%) and Vc (7.89%). However, Pc is more influenced by Vc (39.32%) followed by ap (27.50%) and f (23.18%).The Quadratic mathematical models, obtained by the RSM, presenting the evolution of Ra, Fc, Kc and Pc based on (vc, f, and ap) were presented. A comparison between experimental and predicted values presents good agreements with the models found.Optimization of the machining parameters to achieve the maximum MRR and better Ra was carried out by a desirability function. The results showed that the optimal parameters for maximal MRR and best Ra were found as (vc = 350 m/min, f = 0.088 mm/rev, and ap = 0.9 mm).

scholarly journals Tool Wear, Surface Topography, and Multi-Objective Optimization of Cutting Parameters during Machining AISI 304 Austenitic Stainless Steel Flange

Metals ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 972 ◽  
Author(s):  
Xiaojun Li ◽  
Zhanqiang Liu ◽  
Xiaoliang Liang
Keyword(s):  
Surface Roughness ◽  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Tool Wear ◽  
Surface Defects ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Aisi 304 ◽  
304 Austenitic Stainless Steel ◽  
Optimization Of Cutting Parameters

The application of AISI 304 austenitic stainless steel in various industrial fields has been greatly increased, but poor machinability classifies AISI 304 as a difficult-to-cut material. This study investigated the tool wear, surface topography, and optimization of cutting parameters during the machining of an AISI 304 flange component. The machining features of the AISI 304 flange included both cylindrical and end-face surfaces. Experimental results indicated that an increased cutting speed or feed aggravated tool wear and affected the machined surface roughness and surface defects simultaneously. The generation and distribution of surface defects was random. Tearing surface was the major defect in cylinder turning, while side flow was more severe in face turning. The response surface method (RSM) was applied to explore the influence of cutting parameters (e.g., cutting speed, feed, and depth of cut) on surface roughness, material removal rate (MRR), and specific cutting energy (SCE). The quadratic model of each response variable was proposed by analyzing the experimental data. The optimization of the cutting parameters was performed with a surface roughness less than the required value, the maximum MRR, and the minimum SCE as the objective. It was found that the desirable cutting parameters were v = 120 m/min, f = 0.18 mm/rev, and ap = 0.42 mm for the AISI 304 flange to be machined.

Sign in / Sign up

Export Citation Format

Share Document