Synthesis of MIL-125/Graphene Oxide Composites and Hydrogen Storage Properties

2017 ◽  
Vol 727 ◽  
pp. 683-687 ◽  
Author(s):  
Tian Bao Yang ◽  
Li Xian Sun ◽  
Fen Xu ◽  
Zi Qiang Wang ◽  
Yong Jin Zou ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Hydrogen Storage ◽  
Parent Material ◽  
X Ray Diffraction ◽  
Hydrogen Storage Properties ◽  
Transmission Electron ◽  
Metal Organic ◽  
Ft Ir ◽  
Storage Properties

Metal-organic frameworks (MOFs: MIL-125)-graphene oxide (GO) composite (MO) was synthesized by solvothermal method. All the materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), high resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FT-IR) and Raman spectroscopy. Then their hydrogen storage properties were systematically tested under 1 bar and 77K. The composite material MO-1 possesses higher surface area than the parent material MIL-125 and shows a remarkable H2 capacity up to 2.5 wt% (38% increases vs. MIL-125).

Microwave Synthesis of MOFs/Graphene Oxide Composites and Hydrogen Storage Properties

2016 ◽  
Vol 852 ◽  
pp. 835-840 ◽  
Author(s):  
Tian Bao Yang ◽  
Li Xian Sun ◽  
Fen Xu ◽  
Zi Qiang Wang
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Hydrogen Storage ◽  
Parent Material ◽  
X Ray Diffraction ◽  
Hydrogen Storage Properties ◽  
Transmission Electron ◽  
Metal Organic ◽  
Oxide Composites ◽  
Storage Properties

Metal-organic frameworks (MOFs: copper containing CuBTC)-graphene oxide (GO) composite (CG) was synthesized using microwave heating. The parent material and the composite were characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), nitrogen sorption, scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (HRTEM) and Raman spectroscopy. Then their hydrogen storage properties were systematically tested. The composite material CG shows a remarkable H2 capacity up to 2.43 wt% (28.6% increases vs. CuBTC) and higher surface area and pore volume compared to the neat CuBTC. And the particle size of CG is down to nanometer scale.

Hydrogen storage properties of mechanically alloyedMg–8 mol% LaNi0.5 composite

2004 ◽  
Vol 19 (10) ◽  
pp. 2871-2876 ◽  
Author(s):  
Qian Li ◽  
Qin Lin ◽  
Kuo-Chih Chou ◽  
Li-Jun Jiang ◽  
Feng Zhan
Keyword(s):  
Hydrogen Storage ◽  
Mechanical Alloying ◽  
X Ray Diffraction ◽  
Equilibrium Pressure ◽  
Hydrogen Storage Properties ◽  
X Ray ◽  
Transmission Electron ◽  
Lower Temperature ◽  
Material Preparation ◽  
Storage Properties

A new nano-ternary Mg–8 mol% LaNi0.5 was prepared by melted and subsequent mechanical alloying technique for hydrogen storage. It was found from our experiments that, this kind of alloy had superior hydriding/dehydriding characteristics in comparison with conventional materials for hydrogen storage. It possessed large hydrogen capacity at a lower temperature, which could absorb 4.55–7.01 mass% H under 3 MPa hydrogen pressure and desorb 4.40–6.90 mass% H under 0.0133 MPa in 600 s above 423 K without any activation requirement drawn from our pressure-composition isotherm and kinetic experiments. Through the x-ray diffraction and transmission electron microscopy experiments, we further found that these superior characteristics could be attributed to the multiphase structure and a catalytic effect of LaH3 and Mg2Ni that were formed in the material preparation of mechanical alloying process. Finally, based on these data the relationships between equilibrium pressure of hydrogen and temperature were obtained, they were lgp(0.1 MPa) = −3985/T + 7.188(553 K ⩽ T ⩽ 573K) for hydriding and lgp(0.1 MPa) = −3804/T + 6.770 (553 K ⩽ T ⩽ 573 K) for dehydriding.

scholarly journals Hydrothermal Synthesis, Characterization and Exploration of Photocatalytic Activities of Polyoxometalate: Ni-CoWO4 Nanoparticles

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 456
Author(s):  
Fahad A. Alharthi ◽  
Hamdah S. Alanazi ◽  
Amjad Abdullah Alsyahi ◽  
Naushad Ahmad
Keyword(s):  
Electron Microscopy ◽  
Hydrothermal Synthesis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Structure Morphology ◽  
Photocatalytic Activities ◽  
Ft Ir ◽  
Photocatalytic Reactions ◽  
Cobalt Tungstate

This study demonstrated the hydrothermal synthesis of bimetallic nickel-cobalt tungstate nanostructures, Ni-CoWO4 (NCW-NPs), and their phase structure, morphology, porosity, and optical properties were examined using X-ray Diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Scanning electron microscopy- energy dispersive X-ray spectroscopy (SEM-EDS), high resolution Transmission electron microscopy (HR-TEM), Brunauer-Emmett-Teller (BET) and Raman instruments. It was found that as-calcined NCW-NPs have a monoclinic phase with crystal size ~50–60 nm and is mesoporous. It possessed smooth, spherical, and cubic shape microstructures with defined fringe distance (~0.342 nm). The photocatalytic degradation of methylene blue (MB) and rose bengal (RB) dye in the presence of NCW-NPs was evaluated, and about 49.85% of MB in 150 min and 92.28% of RB in 90 min degraded under visible light. In addition, based on the scavenger’s study, the mechanism for photocatalytic reactions is proposed.

Effect of Synthesis Temperature on Particles Size and Morphology of Zirconium Oxide Nanoparticle

2017 ◽  
Vol 50 ◽  
pp. 18-31 ◽  
Author(s):  
Rudzani Sigwadi ◽  
Simon Dhlamini ◽  
Touhami Mokrani ◽  
Patrick Nonjola
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Zirconium Oxide ◽  
Thermo Gravimetric Analysis ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Crystallite Sizes ◽  
Ft Ir

The paper presents the synthesis and investigation of zirconium oxide (ZrO2) nanoparticles that were synthesised by precipitation method with the effects of the temperatures of reaction on the particles size, morphology, crystallite sizes and stability at high temperature. The reaction temperature effect on the particle size, morphology, crystallite sizes and stabilized a higher temperature (tetragonal and cubic) phases was studied. Thermal decomposition, band structure and functional groups were analyzed by Brunauer-Emmett-Teller (BET), Scanning Electron Microscopy (SEM), Transmission electron microscopy (TEM), X-ray diffraction (XRD), Thermo-gravimetric analysis (TGA) and Fourier transform infrared (FT-IR). The crystal structure was determined using X-ray diffraction. The morphology and the particle size were studied using (SEM) and (TEM). The shaped particles were confirmed through the SEM analysis. The transmission electron microscopic analysis confirmed the formation of the nanoparticles with the particle size. The FT-IR spectra showed the strong presence of ZrO2 nanoparticles.

Study on Nano- and Microcrystallites in Urines of Uric Acid Stone Patients

2013 ◽  
Vol 655-657 ◽  
pp. 1927-1930 ◽  
Author(s):  
Guang Na Zhang ◽  
Zhi Yue Xia ◽  
Jian Ming Ouyang ◽  
Li Kuan
Keyword(s):  
Electron Microscopy ◽  
Uric Acid ◽  
X Ray Diffraction ◽  
Uric Acid Stone ◽  
Urine Ph ◽  
Stone Formers ◽  
Transmission Electron ◽  
Close Relationship ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

The presence of crystallites in urine is closely related to stones formation. In this article, the components, morphology of nano- and micro-crystallites in urines of 20 uric acid (UA) stone formers as well as their relationship with the formation of UAstones were comparatively studied using X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The main constituent of urinary crystallites was uric acid. Their particle size distribution was highly uneven, ranging from several nanometers to several tens of micrometers, and obvious aggregation was observed. These results showed that there was close relationship among stone components, urinary crystallites composition and urine pH.

scholarly journals Improving stability of cerium oxide nanoparticles by microbial polysaccharides coating

2018 ◽  
Vol 83 (6) ◽  
pp. 745-757 ◽  
Author(s):  
Ivana Milenkovic ◽  
Ksenija Radotic ◽  
Branko Matovic ◽  
Marija Prekajski ◽  
Ljiljana Zivkovic ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Cerium Oxide ◽  
Aqueous Media ◽  
Suspension Stability ◽  
X Ray Diffraction ◽  
Synthesis Conditions ◽  
Transmission Electron ◽  
Ft Ir ◽  
Microbial Exopolysaccharides ◽  
The Stability

Cerium oxide (CeO2) nanoparticles (CONPs) are interesting biomaterials with various applications in biomedicine, cosmetics and the pharmaceutical industry, but with limited practical application because of their low stability in aqueous media. The aim of this study was to obtain CONPs with increased stability by coating the particles. Microbial exopolysaccharides (levan, pullulan) and glucose were used to prepare CONPs under different synthesis conditions. Coating was attempted by adding the carbohydrates during (direct coating) or after (subsequent coating) the synthesis of CONPs. The obtained nanoparticles were characterized by X-Ray diffraction analysis, Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The suspension stability of the uncoated and coated CONPs in aqueous media was evaluated by measuring the hydrodynamic size, zeta potential and turbidity. The FT-IR spectra revealed the differences between coated CONPs and showed the success of subsequent coating with carbohydrates. Coating with carbohydrates improved the stability the CONP suspension by decreasing the size of aggregated particles. The suspensions of levan- and glucose-coated CONPs had the best stability. In this study, CONPs were prepared using non-toxic materials, which were completely environmentally friendly. The obtained results open new horizons for CONP synthesis, improving their biological applications.

scholarly journals Synthesis of Polyaniline coated Graphene Oxide @ SrTiO3 Nanocube Nanocomposites for Enhanced Removal of Carcinogenic Dyes from Aqueous Solution

2016 ◽  
Author(s):  
Syed Shahabuddin ◽  
Norazilawati Muhamad Sarih ◽  
Muhammad Afzal Kamboh ◽  
Hamid Rashidi Nodeh ◽  
Sharifah Mohamad
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solution ◽  
Methylene Blue ◽  
Graphene Oxide ◽  
Methyl Orange ◽  
Oxidative Polymerization ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Polymerization Method

The present investigation highlights the synthesis of polyaniline (PANI) coated graphene oxide doped with SrTiO3 nanocube nanocomposites through facile in-situ oxidative polymerization method for the efficient removal of carcinogenic dyes, namely, the cationic dye methylene blue (MB) and the anionic dye methyl orange (MO). The synthesised nanocomposites were characterised by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The adsorption efficiencies of graphene oxide (GO), PANI homopolymer and SrTiO3 nanocubes-doped nanocomposites were assessed by monitoring the adsorption of methylene blue and methyl orange dyes from aqueous solution. The adsorption efficiency of nanocomposites doped with SrTiO3 nanocubes were found to be of higher magnitude as compared with undoped nanocomposite. Moreover, the nanocomposite with 2 wt% SrTiO3 with respect to graphene oxide demonstrated excellent adsorption behaviour with 99% and 91% removal of MB and MO respectively, in a very short duration of time.

Synthesis of Indole Derivatives Using Biosynthesized ZnO-CaO Nanoparticles as an Efficient Catalyst

2021 ◽  
Vol 66 ◽  
pp. 61-71
Author(s):  
Tahereh Heidarzadeh ◽  
Navabeh Nami ◽  
Daryoush Zareyee
Keyword(s):  
Electron Microscopy ◽  
Indole Derivatives ◽  
X Ray Diffraction ◽  
Efficient Catalyst ◽  
X Ray ◽  
Transmission Electron ◽  
Solvent Free Conditions ◽  
Ft Ir ◽  
Eggshell Waste ◽  
Aromatic And Aliphatic Amines

The principal aim of this research is using biosynthesized ZnO-CaO nanoparticles (NPs) for preparation of indole derivatives. ZnO-CaO NPs have been prepared using Zn(CH3COO)2 and eggshell waste powder in solvent-free conditions. Morphology and structure of NPs were determined by FT-IR, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy dispersive spectra (EDS). It was used as a highly efficient catalyst for the synthesis of indole derivatives. Some indole derivatives were synthesized by the reaction of indole, formaldehyde, aromatic and aliphatic amines in the presence of ZnO-CaO NPs (5 mol%) in ethanol under reflux conditions. The assigned structure was further established by CHN analyses, NMR, and FT-IR spectra. Because of excellent capacity, the exceedingly simple workup and good yield, eco-friendly catalyst ZnO-CaO NPs were proved to be a good catalyst for this reaction.

scholarly journals An Efficient and Novel Ammonia Sensor Based on Polypyrrole/Tin Oxide/MWCNT Nanocomposite

2020 ◽  
Vol 32 (6) ◽  
pp. 1505-1510
Author(s):  
Ahmad Husain ◽  
Mohd Urooj Shariq ◽  
Anees Ahmad
Keyword(s):  
Electron Microscopy ◽  
Tin Oxide ◽  
Charge Carriers ◽  
Morphological Properties ◽  
X Ray Diffraction ◽  
Ammonia Sensing ◽  
Transmission Electron ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

In present study, the synthesis and characterization of a novel polypyrrole (PPy)/tin oxide (SnO2)/MWCNT nanocomposite along with pristine polypyrrole is reported. These materials have been studied for their structural and morphological properties by FT-IR spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. PPy/SnO2/MWCNT nanocomposite has been converted into a pellet-shaped sensor, and its ammonia sensing studies were carried out by calculating the variation in the DC electrical conductivity at different concentration of ammonia ranging from 10 to 1500 ppm. The sensing response of the sensor was determined at 1500, 1000, 500, 200, 100 and 10 ppm and found to be 70.4, 66.1, 62.2, 55.4, 50.8 and 39.7%, respectively The sensor showed a complete reversibility at lower concentrations along with excellent selectivity and stability. Finally, a sensing mechanism was also proposed involving polarons (charge carriers) of polypyrrole and lone pairs of ammonia molecules

scholarly journals Reduced Graphene Oxide–Epoxy Grafted Poly(Styrene-Co-Acrylate) Composites for Corrosion Protection of Mild Steel

Coatings ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 666
Author(s):  
Xinchuan Fan ◽  
Yue Hu ◽  
Yijun Zhang ◽  
Jiachen Lu ◽  
Xiaofeng Chen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
X Ray Diffraction ◽  
Corrosion Properties ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Scanning Electron

Reduced graphene oxide–epoxy grafted poly(styrene-co-acrylate) composites (GESA) were prepared by anchoring different amount of epoxy modified poly(styrene-co-acrylate) (EPSA) onto reduced graphene oxide (rGO) sheets through π–π electrostatic attraction. The GESA composites were characterized by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The anti-corrosion properties of rGO/EPSA composites were evaluated by electro-chemical impedance spectroscopy (EIS) in hydroxyl-polyacrylate coating, and the results revealed that the corrosion rate was decreased from 3.509 × 10−1 to 1.394 × 10−6 mm/a.

Sign in / Sign up

Export Citation Format

Share Document