One-Bath Dyeing Technology for Cotton Blended Fabric - Part 2: Assessment of Colouration Effectiveness

2018 ◽  
Vol 762 ◽  
pp. 390-395 ◽  
Author(s):  
Anna Borisova
Keyword(s):  
Colour Change ◽  
Alkaline Treatment ◽  
Disperse Dyes ◽  
Material Base ◽  
Instrumental Approach ◽  
Colour Measurements ◽  
One Step ◽  
One Bath Dyeing ◽  
The One ◽  
Effective Product

The present study deals with the one-step one-bath dyeing of with/without alkaline treatment of twill weaved 50/50 cotton/polyester blended fabric using disperse dyes only. The dyeing results are studied by colorimetric colour measurements, applying instrumental approach, and colour change during fastness tests. Several testing methods are designed and adapted to the disposable technical and material base. The results are found to be promising as an alternative dyeing technology and for effective product quality assessment.

One-Bath Dyeing Technology for Cotton Blended Fabric - Part 1: Elaboration of a Dyebath Content

2018 ◽  
Vol 762 ◽  
pp. 385-389 ◽  
Author(s):  
Anna Borisova
Keyword(s):  
Disperse Dyes ◽  
Industrial Testing ◽  
One Step ◽  
One Bath Dyeing ◽  
The One

The present study deals with the one-step one-bath dyeing of twill weaved 50/50 cotton/polyester blended fabric using disperse dyes only. The study includes dyeing recipe development, considering the determination of optimum concentrations of dyestuff and auxiliaries, and sufficient pH of dyebath. The proposed method is time consuming and hence can be recommended for industrial testing.

Study on One-Bath Dyeing Technology and its Application for Disperse/Reactive Dyes on Polyester/Viscose Blended Fabrics

2012 ◽  
Vol 441 ◽  
pp. 116-121
Author(s):  
Guang Ming Wang ◽  
Lan Zhou ◽  
Jun Li Chen ◽  
Guang Jie Cheng ◽  
Zhong Fa Hu
Keyword(s):  
Acetic Acid ◽  
Reactive Dyes ◽  
Disperse Dyes ◽  
Buffer System ◽  
Color Strength ◽  
Key Technology ◽  
Dyeing Process ◽  
Traditional Process ◽  
One Bath Dyeing ◽  
The One

In order to shorten dyeing process, increase yield and reduce consumption of water and alkaline, the one-bath two-stage heating dyeing process was used for reactive/disperse dyes. The key technology of this research was adding alkaline when polyester/viscose (cotton) blended fabrics were dyed by reactive dyes,and then adding acetic acid when dyed by disperse dyes. During this process, acetic acid and alkali neutralize, and sodium acetate and acetic acid form a buffer system, which greatly improves dyeing reproducibility. The results of factory trial showed that color strength and color fastness of polyester/viscose (cotton) blended fabrics dyed by this process were as same as those achieved by the traditional process.

scholarly journals One-bath One-step Dyeing of Polyester/Cotton (PC) Blends Fabric With Disperse Dyes After Acetylation of Cotton

2021 ◽  
Author(s):  
Girmaye Kumsa Bana ◽  
Gemeda Gebino Gelebo ◽  
Gezu Ketema Janka
Keyword(s):  
Tensile Strength ◽  
Surface Modification ◽  
Disperse Dyes ◽  
Disperse Dye ◽  
Color Strength ◽  
Acetyl Content ◽  
Dyeing Process ◽  
One Step ◽  
The One ◽  
Dyed Fabric

Usually, the two-bath dyeing process using disperse dyes and reactive dyes separately was employed for the dyeing of PC blends. The cost of the double bath, dyeing cycle, energy consumption and chemical consumption is quite higher than the one-step or single bath dyeing methods. In this study, the one-bath dyeing process using one kind of dye was investigated. Polyester cotton blends dyed in one-bath one-step dyeing methods with disperse dye after surface modifications of cotton by acetylation methods were studied. Surface modification of cotton was carried out using fibrous acetylation methods. The effect of acetic anhydride and time on percent acetyl content at room temperature was studied. Modified polyester/cotton was carried out in HTHP dyeing machine incorporates with different dye concentrations and dyeing temperature. Surface chemistry, thermal decomposition property and moisture regain of modified polyester/ cotton blend are evaluated. The color strength of the dyed fabrics and their fastness properties to washing, light, and rubbing as well as tear strength and abrasion resistance were evaluated. The effect of dye concentration and temperature color strength, tensile strength warp and weft direction was assessed. The optimum value for surface modification was obtained with a concentration of acetylation agent 16% and time of reaction 2.5 hours, gave percent acetylation of 34. An FTIR spectrum shows acetylation resonance. The experiment result of dyeing showed that the optimum value was obtained with dye concentration above 1% at a temperature of 120oC, warp tensile strength decreased by 12% and weft tensile strength was decreased by 9% from the control half-bleached fabric. Results of this study showed that a one-step one-bath dyed modified polyester/cotton blend with disperse dye fabric presents good fastness property compared with conventional two-bath dyed fabric as well as colour strength values.

A Study on the Rearrangement of Dialkyl 1-Aryl-1-hydroxymethylphosphonates to Benzyl Phosphates

2020 ◽  
Vol 24 (4) ◽  
pp. 465-471 ◽  
Author(s):  
Zita Rádai ◽  
Réka Szabó ◽  
Áron Szigetvári ◽  
Nóra Zsuzsa Kiss ◽  
Zoltán Mucsi ◽  
...  
Keyword(s):  
Quantum Chemical ◽  
Room Temperature ◽  
Phase Transfer ◽  
One Pot ◽  
Substrate Dependence ◽  
Triethylbenzylammonium Chloride ◽  
One Step ◽  
The Pudovik Reaction ◽  
The One ◽  
Solid Liquid

The phospha-Brook rearrangement of dialkyl 1-aryl-1-hydroxymethylphosphonates (HPs) to the corresponding benzyl phosphates (BPs) has been elaborated under solid-liquid phase transfer catalytic conditions. The best procedure involved the use of triethylbenzylammonium chloride as the catalyst and Cs2CO3 as the base in acetonitrile as the solvent at room temperature. The substrate dependence of the rearrangement has been studied, and the mechanism of the transformation under discussion was explored by quantum chemical calculations. The key intermediate is an oxaphosphirane. The one-pot version starting with the Pudovik reaction has also been developed. The conditions of this tandem transformation were the same, as those for the one-step HP→BP conversion.

Photodegradation of hydrophobic disperse dyes and dye-bath effluents by silicadodecatungstate (SiW12O404-/5-) nanoparticles

2004 ◽  
Vol 49 (4) ◽  
pp. 171-176 ◽  
Author(s):  
I. Arslan-Alaton ◽  
S. Dogruel
Keyword(s):  
Chemical Oxidation ◽  
Reduced Form ◽  
Disperse Dyes ◽  
Power Ultrasound ◽  
Substrate Complex ◽  
Rate Limiting Step ◽  
Uv Photodegradation ◽  
The One ◽  
Rate Limiting ◽  
Decolorization Kinetics

Polyoxometalate (POM) silicadodecatungstic acid has been applied as a photochemical catalyst for the degradation of ®SETAPERS Black WNSP, a disperse dyestuff preparation widely used to dye polyester and polyamide fabrics. It could be demonstrated that the disperse dyestuff was photo-reduced by SiW12O405-, the one electron-reduced form of POM, as evidenced by Heteropolyblue (HPB) formation. For completion of the photochemical redox cycle, isopropanol (IsOH) was required. Acetone (Ac) served solely as an effective solute and photosensitizer; however this effect was suppressed in the presence of POM. Threshold (0.087 mM) and optimum (0.375 mM) POM concentrations existed and decolorization kinetics were inhibited upon the addition of dye auxiliary chemicals. Increasing the dyestuff concentration from 50 mg/L to 150 mg/L did not affect initial decolorization kinetics revealing that not the formation of the excited [POM-Substrate]* complex, but its reduction to HPB was the rate limiting step. POM-mediated, IsOH-assisted UV-photodegradation of disperse dyes and dye-baths is by far more effective than applying other, more well known chemical oxidation methods (O3, H2O2/UV, Power Ultrasound). Key to the action of POM redox catalysts is the feature that particularly heteropoly tungstates undergo facile re-oxidation to their original state, thus allowing regeneration of the photocatalyst, a feature that may become critical for real-scale application.

scholarly journals One-Year Clinical Evaluation of the Bonding Effectiveness of a One-Step, Self-Etch Adhesive in Noncarious Cervical Lesion Therapy

2015 ◽  
Vol 2015 ◽  
pp. 1-5 ◽  
Author(s):  
Babacar Faye ◽  
Mouhamed Sarr ◽  
Khaly Bane ◽  
Adjaratou Wakha Aidara ◽  
Seydina Ousmane Niang ◽  
...  
Keyword(s):  
Clinical Performance ◽  
Retention Rate ◽  
Recall Rate ◽  
Acid Etching ◽  
Significant Difference ◽  
Usphs Criteria ◽  
One Step ◽  
One Year ◽  
The One ◽  
Self Etch

This study evaluated the one-year clinical performance of a one-step, self-etch adhesive (Optibond All-in-One, Kerr, CA, USA) combined with a composite (Herculite XRV Ultra, Kerr Hawe, CA, USA) to restore NCCLs with or without prior acid etching. Restorations performed by the same practitioner were evaluated at baseline and after 3, 6, and 12 months using modified USPHS criteria. At 6 months, the recall rate was 100%. The retention rate was 84.2% for restorations with prior acid etching, but statistically significant differences were observed between baseline and 6 months. Without acid etching, the retention rate was 77%, and no statistically significant difference was noted between 3 and 6 months. Marginal integrity (93.7% with and 87.7% without acid etching) and discoloration (95.3% with and 92.9% without acid etching) were scored as Alpha or Bravo, with better results after acid etching. After one year, the recall rate was 58.06%. Loss of pulp vitality, postoperative sensitivity, or secondary caries were not observed. After one year retention rate was of 90.6% and 76.9% with and without acid conditioning. Optibond All-in-One performs at a satisfactory clinical performance level for restoration of NCCLs after 12 months especially after acid etching.

scholarly journals Building up cyclodextrins from scratch – templated enzymatic synthesis of cyclodextrins directly from maltose

2021 ◽  
Author(s):  
Dennis Larsen ◽  
Sophie R. Beeren
Keyword(s):  
Enzymatic Synthesis ◽  
Combinatorial Libraries ◽  
One Step ◽  
The One ◽  
Kinetic Trapping

Template-induced kinetic trapping of specific cyclodextrins in enzyme-mediated dynamic combinatorial libraries of linear and cyclic α-glucans enables the one-step synthesis of cyclodextrins from maltose in water.

scholarly journals Efficient Cryopreservation of Populus tremula by In Vitro-Grown Axillary Buds and Genetic Stability of Recovered Plants

Plants ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 77
Author(s):  
Elena O. Vidyagina ◽  
Nikolay N. Kharchenko ◽  
Konstantin A. Shestibratov
Keyword(s):  
Survival Rate ◽  
Axillary Buds ◽  
Long Term Storage ◽  
Average Survival ◽  
Transgenic Lines ◽  
Ssr Loci ◽  
One Step ◽  
The One

Axillary buds of in vitro microshoots were successfully frozen at –196 °C by the one-step freezing method using the protective vitrification solution 2 (PVS2). Microshoots were taken from 11 transgenic lines and three wild type lines. Influence of different explant pretreatments were analyzed from the point of their influence towards recovery after cryopreservation. It was found out that the use of axillary buds as explants after removal of the apical one increases recovery on average by 8%. The cultivation on growth medium of higher density insignificantly raises the regenerants survival rate. Pretreatment of the osmotic fluid (OF) shows the greatest influence on the survival rate. It leads to the increase in survival rate by 20%. The cryopreservation technology providing regenerants average survival rate of 83% was developed. It was based on the experimental results obtained with explant pretreatment. Incubation time in liquid nitrogen did not affect the explants survival rate after thawing. After six months cryostorage of samples their genetic variability was analyzed. Six variable simple sequence repeat (SSR) loci were used to analyze genotype variability after the freezing-thawing procedure. The microsatellite analysis showed the genetic status identity of plants after cryopreservation and of the original genotypes. The presence of the recombinant gene in the transgenic lines after cryostorage were confirmed so as the interclonal variation in the growth rate under greenhouse conditions. The developed technique is recommended for long-term storage of various breeding and genetically modified lines of aspen plants, as it provides a high percentage of explants survival with no changes in genotype.

scholarly journals Understanding mathematics of Grover’s algorithm

2021 ◽  
Vol 20 (5) ◽  
Author(s):  
Paweł J. Szabłowski
Keyword(s):  
Phase Change ◽  
Unitary Operator ◽  
Mathematical Structure ◽  
Complex Numbers ◽  
Unitary Operators ◽  
Grover’S Algorithm ◽  
Great Probability ◽  
Grover's Algorithm ◽  
One Step ◽  
The One

AbstractWe analyze the mathematical structure of the classical Grover’s algorithm and put it within the framework of linear algebra over the complex numbers. We also generalize it in the sense, that we are seeking not the one ‘chosen’ element (sometimes called a ‘solution’) of the dataset, but a set of m such ‘chosen’ elements (out of $$n>m)$$ n > m ) . Besides, we do not assume that the so-called initial superposition is uniform. We assume also that we have at our disposal an oracle that ‘marks,’ by a suitable phase change $$\varphi $$ φ , all these ‘chosen’ elements. In the first part of the paper, we construct a unique unitary operator that selects all ‘chosen’ elements in one step. The constructed operator is uniquely defined by the numbers $$\varphi $$ φ and $$\alpha $$ α which is a certain function of the coefficients of the initial superposition. Moreover, it is in the form of a composition of two so-called reflections. The result is purely theoretical since the phase change required to reach this heavily depends on $$\alpha $$ α . In the second part, we construct unitary operators having a form of composition of two or more reflections (generalizing the constructed operator) given the set of orthogonal versors. We find properties of these operations, in particular, their compositions. Further, by considering a fixed, ‘convenient’ phase change $$\varphi ,$$ φ , and by sequentially applying the so-constructed operator, we find the number of steps to find these ‘chosen’ elements with great probability. We apply this knowledge to study the generalizations of Grover’s algorithm ($$m=1,\phi =\pi $$ m = 1 , ϕ = π ), which are of the form, the found previously, unitary operators.

Sign in / Sign up

Export Citation Format

Share Document