Simulating the Interaction between a Straight Boundary and a Particle

2004 ◽  
Vol 467-470 ◽  
pp. 1105-1110
Author(s):  
B. Radhakrishnan ◽  
G.B. Sarma
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
Energy Difference ◽  
Interaction Force ◽  
Lattice Temperature ◽  
Stored Energy ◽  
Theoretical Limit ◽  
Interface Position ◽  
Model Simulations ◽  
Boundary Velocity

The paper describes large scale, three-dimensional, Potts model simulations of the interaction between a coarse particle and a straight boundary driven by a bulk stored energy difference across the boundary. It is shown that the variation of the interaction energy as a function of the interface position is significantly affected by the choice of the lattice temperature. The maximum force offered by the particle on the grain boundary decreases with increasing lattice temperature and approaches the theoretical limit at high lattice temperatures. The boundary velocity responds appropriately to changes in the magnitude and direction of the interaction force only at high lattice temperatures.

Influence of CGD structure on burden descending behavior in COREX shaft furnace

2019 ◽  
Vol 116 (3) ◽  
pp. 304 ◽  
Author(s):  
Xingsheng Zhang ◽  
Zongshu Zou ◽  
Zhiguo Luo
Keyword(s):  
Large Scale ◽  
Gas Flow ◽  
Shaft Furnace ◽  
Three Dimensional ◽  
Interaction Force ◽  
Flow Patterns ◽  
Solid Flow ◽  
Reducing Gas ◽  
A New Technique ◽  
Actual Size

For improving the reducing gas flow in the center of a large-scale shaft furnace, the central gas distribution (CGD) device, a new technique, is proposed and installed in the shaft furnace. Because of its less-developed history, the solid flow in the shaft furnace with CGD is unclear. In this work, a three-dimensional cylindrical model of COREX-3000 shaft furnace in actual size is established based on DEM. Four types of burden, including pellet, lump ore, coke and flux, are taken into consideration in the model. The model is validated by experiment and then it is used to investigate the influence of CGD structure on solid flow patterns, burden descending velocity, interaction force and abrasive wear. The results show that the CGD structure has some effects on the solid flow patterns and burden descending velocity. As the CGD diameter increases, the interaction force between particles is decreased but the total abrasion energy on CGD is increased. As the CGD height increases, both the interaction force between particles and the total abrasion energy on CGD are decreased.

scholarly journals Cloud-Resolving Model Simulations of KWAJEX: Model Sensitivities and Comparisons with Satellite and Radar Observations

2007 ◽  
Vol 64 (5) ◽  
pp. 1488-1508 ◽  
Author(s):  
Peter N. Blossey ◽  
Christopher S. Bretherton ◽  
Jasmine Cetrone ◽  
Marat Kharoutdinov
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
Longwave Radiation ◽  
Radiative Fluxes ◽  
Model Simulations ◽  
Time Period ◽  
Ground Validation ◽  
Cloud Resolving Model ◽  
Sensitivity Studies ◽  
Upper Level

Abstract Three-dimensional cloud-resolving model simulations of a mesoscale region around Kwajalein Island during the Kwajalein Experiment (KWAJEX) are performed. Using observed winds along with surface and large-scale thermodynamic forcings, the model tracks the observed mean thermodynamic soundings without thermodynamic nudging during 52-day simulations spanning the whole experiment time period, 24 July–14 September 1999. Detailed comparisons of the results with cloud and precipitation observations, including radar reflectivities from the Kwajalein ground validation radar and International Satellite Cloud Climatology Project (ISCCP) cloud amounts and radiative fluxes, reveal the biases and sensitivities of the model’s simulated clouds. The amount and optical depth of high cloud are underpredicted by the model during less rainy periods, leading to excessive outgoing longwave radiation (OLR) and insufficient albedo. The simulated radar reflectivities tend to be excessive, especially in the upper troposphere, suggesting that simulated high clouds are precipitating large hydrometeors too efficiently. Occasionally, large-scale advective forcing errors also seem to contribute to upper-level cloud and relative humidity biases. An extensive suite of sensitivity studies to different microphysical and radiative parameterizations is performed, with surprisingly little impact on the results in most cases.

scholarly journals A Review on Additive Manufacturing Possibilities for Electrical Machines

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin
Keyword(s):  
Additive Manufacturing ◽  
Large Scale ◽  
Three Dimensional ◽  
Electrical Machines ◽  
Electromagnetic Properties ◽  
Scale Production ◽  
Performance Parameters ◽  
Large Scale Production ◽  
One Step ◽  
Manufacturing Techniques

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.

scholarly journals Vibration characteristics of triple-gear-rotor system in compressed air energy storage under variable torque load

2021 ◽  
Vol 104 (1) ◽  
pp. 003685042098705
Author(s):  
Xinran Wang ◽  
Yangli Zhu ◽  
Wen Li ◽  
Dongxu Hu ◽  
Xuehui Zhang ◽  
...  
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
Element Model ◽  
Rotor System ◽  
Dynamic Responses ◽  
System Response ◽  
Rotating Speed ◽  
Torque Load ◽  
Set Up ◽  
Two Stages

This paper focuses on the effects of the off-design operation of CAES on the dynamic characteristics of the triple-gear-rotor system. A finite element model of the system is set up with unbalanced excitations, torque load excitations, and backlash which lead to variations of tooth contact status. An experiment is carried out to verify the accuracy of the mathematical model. The results show that when the system is subjected to large-scale torque load lifting at a high rotating speed, it has two stages of relatively strong periodicity when the torque load is light, and of chaotic when the torque load is heavy, with the transition between the two states being relatively quick and violent. The analysis of the three-dimensional acceleration spectrum and the meshing force shows that the variation in the meshing state and the fluctuation of the meshing force is the basic reasons for the variation in the system response with the torque load. In addition, the three rotors in the triple-gear-rotor system studied show a strong similarity in the meshing states and meshing force fluctuations, which result in the similarity in the dynamic responses of the three rotors.

scholarly journals Shell-crossing in a ΛCDM Universe

2020 ◽  
Vol 501 (1) ◽  
pp. L71-L75
Author(s):  
Cornelius Rampf ◽  
Oliver Hahn
Keyword(s):  
Dark Matter ◽  
Perturbation Theory ◽  
Large Scale ◽  
Cold Dark Matter ◽  
Three Dimensional ◽  
Random Initial Data ◽  
Recursion Relations ◽  
Indispensable Tool ◽  
First Time ◽  
Very High

ABSTRACT Perturbation theory is an indispensable tool for studying the cosmic large-scale structure, and establishing its limits is therefore of utmost importance. One crucial limitation of perturbation theory is shell-crossing, which is the instance when cold-dark-matter trajectories intersect for the first time. We investigate Lagrangian perturbation theory (LPT) at very high orders in the vicinity of the first shell-crossing for random initial data in a realistic three-dimensional Universe. For this, we have numerically implemented the all-order recursion relations for the matter trajectories, from which the convergence of the LPT series at shell-crossing is established. Convergence studies performed at large orders reveal the nature of the convergence-limiting singularities. These singularities are not the well-known density singularities at shell-crossing but occur at later times when LPT already ceased to provide physically meaningful results.

scholarly journals Advancing Drug Discovery for Neurological Disorders Using iPSC-Derived Neural Organoids

2021 ◽  
Vol 22 (5) ◽  
pp. 2659
Author(s):  
Gianluca Costamagna ◽  
Giacomo Pietro Comi ◽  
Stefania Corti
Keyword(s):  
Drug Discovery ◽  
Drug Screening ◽  
Neural Development ◽  
Neurological Disorders ◽  
Large Scale ◽  
Three Dimensional ◽  
Induced Pluripotent Stem Cell ◽  
Cellular Level ◽  
Complex Data ◽  
Complex Data Sets

In the last decade, different research groups in the academic setting have developed induced pluripotent stem cell-based protocols to generate three-dimensional, multicellular, neural organoids. Their use to model brain biology, early neural development, and human diseases has provided new insights into the pathophysiology of neuropsychiatric and neurological disorders, including microcephaly, autism, Parkinson’s disease, and Alzheimer’s disease. However, the adoption of organoid technology for large-scale drug screening in the industry has been hampered by challenges with reproducibility, scalability, and translatability to human disease. Potential technical solutions to expand their use in drug discovery pipelines include Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) to create isogenic models, single-cell RNA sequencing to characterize the model at a cellular level, and machine learning to analyze complex data sets. In addition, high-content imaging, automated liquid handling, and standardized assays represent other valuable tools toward this goal. Though several open issues still hamper the full implementation of the organoid technology outside academia, rapid progress in this field will help to prompt its translation toward large-scale drug screening for neurological disorders.

Large-scale, three-dimensional tissue cytometry of the human kidney: a complete and accessible pipeline

2021 ◽  
Author(s):  
Michael J. Ferkowicz ◽  
◽  
Seth Winfree ◽  
Angela R. Sabo ◽  
Malgorzata M. Kamocka ◽  
...  
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
Human Kidney

scholarly journals Prevention of Mountain Disasters and Maintenance of Residential Area through Real-Time Terrain Rendering

2021 ◽  
Vol 13 (5) ◽  
pp. 2950
Author(s):  
Su-Kyung Sung ◽  
Eun-Seok Lee ◽  
Byeong-Seok Shin
Keyword(s):  
Real Time ◽  
Graphics Processing Units ◽  
High Speed ◽  
Large Scale ◽  
Civil Engineering ◽  
Three Dimensional ◽  
Sampled Data ◽  
Residential Areas ◽  
Terrain Rendering ◽  
Mountain Disasters

Climate change increases the frequency of localized heavy rains and typhoons. As a result, mountain disasters, such as landslides and earthworks, continue to occur, causing damage to roads and residential areas downstream. Moreover, large-scale civil engineering works, including dam construction, cause rapid changes in the terrain, which harm the stability of residential areas. Disasters, such as landslides and earthenware, occur extensively, and there are limitations in the field of investigation; thus, there are many studies being conducted to model terrain geometrically and to observe changes in terrain according to external factors. However, conventional topography methods are expressed in a way that can only be interpreted by people with specialized knowledge. Therefore, there is a lack of consideration for three-dimensional visualization that helps non-experts understand. We need a way to express changes in terrain in real time and to make it intuitive for non-experts to understand. In conventional height-based terrain modeling and simulation, there is a problem in which some of the sampled data are irregularly distorted and do not show the exact terrain shape. The proposed method utilizes a hierarchical vertex cohesion map to correct inaccurately modeled terrain caused by uniform height sampling, and to compensate for geometric errors using Hausdorff distances, while not considering only the elevation difference of the terrain. The mesh reconstruction, which triangulates the three-vertex placed at each location and makes it the smallest unit of 3D model data, can be done at high speed on graphics processing units (GPUs). Our experiments confirm that it is possible to express changes in terrain accurately and quickly compared with existing methods. These functions can improve the sustainability of residential spaces by predicting the damage caused by mountainous disasters or civil engineering works around the city and make it easy for non-experts to understand.

Sign in / Sign up

Export Citation Format

Share Document