Impact of Superplasticizing Agents on Physical and Mechanical Properties of Cellular Concrete

2019 ◽  
Vol 974 ◽  
pp. 181-186
Author(s):  
V.A. Perfilov ◽  
V.V. Gabova ◽  
Inessa A. Tomareva
Keyword(s):  
Mechanical Properties ◽  
Pore Structure ◽  
Pore Space ◽  
Experimental Studies ◽  
Basalt Fiber ◽  
Physical And Mechanical Properties ◽  
Foam Concrete ◽  
Cellular Concrete

The effect of superplasticizing, foam agents, various fiber aggregates on the physical and mechanical properties of cellular concrete has been studied. The article covers the results of experimental studies conducted to determine the effect of foam agents PO-6 and PB-2000, as well as polymeric and basalt fiber on the pore structure of foam concrete. The dependence between the change in density and strength of cellular concrete and the structure of its pore space has been determined.

scholarly journals SYNTHESIS OF STRUCTURES OF CELLULAR-CONCRETE COMPOSITES WITH NANOSIZED COMPONENTS

Vestnik MGSU ◽  
2017 ◽  
pp. 733-740
Author(s):  
Valentina Anatol'yevna Solonina ◽  
Galina Alexandrovna Zimakova ◽  
Dmitriy Sergeevich Baianov ◽  
Pavel Valer'evich Sharko ◽  
Marina Petrovna Zelig
Keyword(s):  
Mechanical Properties ◽  
Portland Cement ◽  
Pore Structure ◽  
Physical And Mechanical Properties ◽  
Structure And Properties ◽  
Integrated Research ◽  
High Calcium ◽  
Nanopore Structure ◽  
Matrix Stone ◽  
Cellular Concrete

The article reveals the results of one of the stages of the integrated research studying the influence of compounds and disperse characteristics of silica-containing materials on structure formation and qualities of cellular concrete. It has been indicated that the improvement of physical and mechanical properties of cellular concrete can be achieved through creating the best possible pore structure of the concrete and the structure of interporous frame as well as intensification of hydration and crystallization processes under hydrothermal treatment and, as a result, the increase in number and perfecting morphology of hydrated phases. Up-to-date knowledge about the structure and properties of cellular concrete shows potential capacities to enlarge strength characteristics through forming a nanopore structure of a matrix stone, the effective usage of power potential of multicomponent binding including Portland cement, high-calcium lime, activate silica components with grains of submicron and nanometer range.

scholarly journals Characteristics of Lightweight Cellular Concrete and Effects on Mechanical Properties

Materials ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 2678 ◽  
Author(s):  
Wei Yu ◽  
Xu Liang ◽  
Frank Mi-Way Ni ◽  
Abimbola Grace Oyeyi ◽  
Susan Tighe
Keyword(s):  
Mechanical Properties ◽  
Pore Structure ◽  
High Definition ◽  
Pore Characteristics ◽  
Software Applications ◽  
Solid Part ◽  
Electron Microscopes ◽  
Lab Test ◽  
Scanning Electron Microscopes ◽  
Cellular Concrete

This study investigated the pore structure and its effects on mechanical properties of lightweight cellular concrete (LCC) in order to understand more and detailed characteristics of such structure. As part of investigation, environment scanning electron microscopes (ESEM) and industrial high-definition (HD) macro photography camera were separately used to capture and compare images of specimens. Physical properties of the pore structure, including pore area, size, perimeter, fit ellipse, and shape descriptors, were studied based on the image processing technology and software applications. Specimens with three different densities (400, 475, and 600 kg/m3) were prepared in the laboratory. Firstly, the effects of density on the characteristics of pore structure were investigated; furthermore, mechanical properties (compressive strength, modulus of elasticity and Poisson’s ratio, flexural strength and splitting tensile strength of LCC) were tested. The relationships among pore characteristics, density, and mechanical properties were analyzed. Based on the results obtained from the lab test—comparisons made between specimens with high-densities and those with low-densities—it was found significant variability in bubble size, thickness, and irregularity of pores. Furthermore, the increase of density is accompanied by better mechanical properties, and the main influencing factors are the thickness of the solid part and the shape of the bubble. The thicker of solid part and more regular pores of LCC has, the better mechanical properties are.

Effect of Wood Filler Concentration on Physical and Mechanical Properties of PLA-Based Composites

2021 ◽  
Vol 887 ◽  
pp. 110-115
Author(s):  
G.A. Sabirova ◽  
R.R. Safin ◽  
N.R. Galyavetdinov
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Elastic Modulus ◽  
Composite Materials ◽  
Impact Strength ◽  
Wood Flour ◽  
Experimental Studies ◽  
Physical And Mechanical Properties ◽  
Filler Concentration ◽  
High Concentration

This paper presents the findings of experimental studies of the physical and mechanical properties of wood-filled composites based on polylactide (PLA) and vegetable filler in the form of wood flour (WF) thermally modified at 200-240 °C. It also reveals the dependence of the tensile strength, impact strength, bending elastic modulus, and density of composites on the amount of wood filler and the temperature of its thermal pre-modification. We established that an increase in the concentration of the introduced filler and the degree of its heat treatment results in a decrease of the tensile strength, impact strength and density of composite materials, while with a lower binder content, thermal modification at 200 °C has a positive effect on bending elastic modulus. We also found that 40 % content of a wood filler heated to 200 °C is sufficient to maintain relatively high physical and mechanical properties of composite materials. With a higher content of a wood filler, the cost can be reduced but the quality of products made of this material may significantly deteriorate. However, depending on the application and the life cycle of this product, it is possible to develop a formulation that includes a high concentration of filler.

scholarly journals RESEARCH OF PHYSICAL AND MECHANICAL PROPERTIES OF WOOD-FIBER MATERIALS

2020 ◽  
pp. 451-457
Author(s):  
Aleksandr Yur'yevich Vititnev ◽  
Yuriy Davydovich Alashkevich ◽  
Natal'ya Geral'dovna Chistova ◽  
Roman Aleksandrovich Marchenko ◽  
Venera Nurullovna Matygullina
Keyword(s):  
Mechanical Properties ◽  
Wood Fiber ◽  
Experimental Studies ◽  
Physical And Mechanical Properties ◽  
Production Method ◽  
Strength Properties ◽  
Grinding Process ◽  
Technological Parameters ◽  
Fiber Materials ◽  
Traditional Construction

This paper presents the results of experimental studies of the physical and mechanical properties of wood-fiber boards of the wet production method when regulating the design and technological parameters of the grinding process. This allowed us to determine the influence of the working clearance between the grinding discs and the concentration of fibre mass with the subject to of quality change wood fiber after defibrator using the developed construction of the disc fibrillation action on the physico-mechanical properties of boards. As a result of the experiment, regression models were obtained that adequately describe the studied grinding process and allow predicting the values of physical and mechanical properties of the finished product depending on the established  parameters process. A comparative analysis of the size and quality characteristics of the fiber semi-finished product and its fractional composition when using a developed construction the disc of refiner fibrillation action and a traditional design used in industry is carried out. The preferential efficiency of the grinding process under the fibrillating effect the disc of refiner in comparison with the traditional construction disc of refiner is established. As a result, there is a significant improvement in the quality indicators of the fiber semi-finished product and its composition due to the formation and predominance in the total mass of long and thin, respectively, flexible fibrillated fibers with high tile-forming properties, which allows to increase the strength properties of the product (by 20–25%), without using binding resins.

Differences in petrophysical and mechanical properties between low- and middle-rank coal subjected to liquid nitrogen cooling in coalbed methane mining

2021 ◽  
pp. 1-10
Author(s):  
Menglin Du ◽  
Feng Gao ◽  
Chengzheng Cai ◽  
Shanjie Su ◽  
Zekai Wang
Keyword(s):  
Mechanical Properties ◽  
Pore Structure ◽  
Liquid Nitrogen ◽  
Coalbed Methane ◽  
Bituminous Coal ◽  
Thermal Damage ◽  
Physical And Mechanical Properties ◽  
Damage Degree ◽  
Lignite Coal ◽  
The Difference

Abstract Exploring the damage differences between different coal rank coal reservoirs subjected to liquid nitrogen (LN2) cooling is of great significance to the rational development and efficient utilization of coalbed methane. For this purpose, the mechanical properties, acoustic emission (AE) characteristics and energy evolution law of lignite and bituminous coal subjected to LN2 cooling were investigated based on the Brazilian splitting tests. Then, pore structure changes were analyzed to reveal the difference in the microscopic damage between lignite and bituminous coal after LN2 cooling. The results showed that compared with bituminous coal, the pore structure of lignite coal changed more obviously, which was manifested as follows: significant increases in porosity, pore diameters, and pore area; a larger transformation from micropores and transition pores to mesopores and macropores. After LN2 cooling, the thermal damage inside lignite and bituminous coal was 0.412 and 0.069, respectively. The thermal damage reduced the cohesive force between mineral particles, leading to the deterioration of the macroscopic physical and mechanical properties. Simultaneously, denser AE ringing counts and larger accumulated ringing counts were observed after LN2 cooling. Moreover, the random distribution of thermal damage enhanced the randomness of the macrocrack propagation direction, resulting in an increase in the crack path tortuosity. With more initial defects inside coal, a more obvious thermal damage degree and wider damage distribution will be induced by LN2 cooling, leading to more complicated crack formation paths and a higher fragmentation degree, such as that of lignite coal.

scholarly journals RESULTS OF MULTIVARIATE EXPERIMENT TO DETERMINE DEPENDENCE OF THE MAXIMUM PRESSURE OF TRACTOR WHEELS ON THE SOIL FROM TRACTOR’S PARAMETERS AND PHYSICAL AND MECHANICAL PROPERTIES OF SOIL. STATISTICAL ANALYSIS

2017 ◽  
pp. 94-98
Author(s):  
Хафизов ◽  
Kamil Khafizov ◽  
Хафизов ◽  
Ramil Khafizov
Keyword(s):  
Mechanical Properties ◽  
Similarity Theory ◽  
Experimental Studies ◽  
Similarity Criterion ◽  
Statistical Processing ◽  
Physical And Mechanical Properties ◽  
Multiple Correlation Coefficient ◽  
Similarity Criteria ◽  
Maximum Pressure ◽  
Regression Equations

A similarity criteria were reveled to determine the dependence of maximum pressure of the tractor wheel on the soil on the basis of the use of similarity theory. Each similarity criterion includes several parameters, characterizing the tractor, its propeller and physical and mechanical properties of the soil. The similarity criteria is taken as factors in the multivariate experiment. Multifactorial experimental studies were planned and carried out. We used Statistics Toolbox subsystem of Matlab computer mathematics system for processing the results of experiments. As a result of statistical processing of the experimental data by the equation we obtained a dependence of maximum pressure of the tractor wheel on the soil from tractor parameters, and physical and mechanical properties of the soil. Statistical data on the equations, such as - multiple correlation coefficient, Fisher’s criterion, Student’s criterion, indicate the significance of equations of the experiments variants, as well as the significance of the coefficients of the regression equations.

scholarly journals Experimental research of dependence between informative parameters NDT techniques and steel physical and mechanical properties

2018 ◽  
pp. 44-48
Author(s):  
N. I. Chaban
Keyword(s):  
Mechanical Properties ◽  
Experimental Studies ◽  
Physical And Mechanical Properties ◽  
Ultrasonic Field ◽  
Failure Detectors ◽  
Metal Structures ◽  
New Methods ◽  
Informative Parameters ◽  
Non Destructive

Research of new methods and technologies of non-destructive control of change of long-term metal structures is an actual task of the present. In this article the methodology and results of experimental studies, the main aim of which is to determine the correlation between the intensity of structural noise in the material determined by failure detectors based on ultrasonic field-induced phase grating and the physical and mechanical properties of steels are presented.

scholarly journals ЕКСПЛУАТАЦІЙНІ ВЛАСТИВОСТІ ГОТЕЛЬНИХ МАХРОВИХ РУШНИКІВ

2021 ◽  
pp. 43-51
Author(s):  
А. С. Паршин ◽  
С. І. Арабулі ◽  
А. Т. Арабулі
Keyword(s):  
Mechanical Properties ◽  
Materials Science ◽  
Experimental Studies ◽  
Statistical Processing ◽  
Physical And Mechanical Properties ◽  
Basic Principles ◽  
Textile Materials ◽  
Textile Fabrics ◽  
High Level ◽  
Experimental Researches

Assessment of the providing level of hotel facilities by quality terry towels based on a comprehensive study of the operational properties of terry textile fabrics. Methodology. Theoretical and experimental researches are based on the basic principles of textile materials science. During experimental studies, modern methods were used to determine the physical and mechanical properties of textile materials, as well as methods of mathematical planning and statistical processing of the experimental results. Results. The state and norms for the provision of hotel facilities in Ukraine with terry towels are given. The assortment of hotel terry towels has been analyzed. The main factors of the formation of a modern assortment of textile materials for hotel terry towels are considered. The focus is on the classic range of double nap terry fabrics for hotel towels. The analyses of the physical and mechanical properties of modern fabrics for hotel towels are present. Indicators characterizing the interaction of textile with liquid moisture have been experimentally determined. The paper presents the results of determining the wear resistance of fabrics after 1, 5 and 10 cycles "wash-ironing". Scientifi c novelty. The data of the physical and mechanical properties of the classic assortment of textile materials for hotel terry towels are systematized. It has been experimentally proven that the assortment of cotton terry textile materials, which is currently available on the Ukrainian market and is used for the manufacture of hotel terry towels, provides a high level of comfort and durability of towels. Practical value. The modern assortment of textile materials for hotel terry towels is analyzed, taking into account the peculiarities of the operational situation of consumption.

Sign in / Sign up

Export Citation Format

Share Document