A Performance Study of CNT/TiO2/ PVA Loaded on the Paper Filter for Benzene Treatment from Cigarette Smoke

2020 ◽  
Vol 990 ◽  
pp. 312-317
Author(s):  
Mathana Wongaree ◽  
Adisak Bootwong
Keyword(s):  
Carbon Nanotubes ◽  
Photocatalytic Activity ◽  
Cigarette Smoke ◽  
High Performance ◽  
Adsorption Efficiency ◽  
Performance Study ◽  
Air Treatment ◽  
Air Purifier ◽  
Mixing Method ◽  
Paper Filter

This work has studied the performance of benzene treatment from cigarette smoke using the prepared CNT/TiO2/PVA loaded on the paper filter in the air purifier reactor. CNT/TiO2 nanomaterial was prepared from a mixture of carbon nanotubes modified with sulfuric acid and titanium dioxide by a simple mixing method in the ambient temperature. CNT/TiO2 nanomaterial was then loaded on the paper filter by a filtrating technique using 12%w/v polyvinyl alcohol (PVA) as a co-polymer. The weight of CNT/TiO2 loaded on the paper filter was fixed at 3 g. The ratios of CNT: TiO2 was varied at 1:5, 1:10, and 1:15 w/w, respectively. The performance of air purifier using CNT/TiO2/PVA loaded on the paper filter with various ratios was investigated on the photocatalytic activity of benzene treatment from cigarette smoke under visible light. The decreased benzene concentrations were analyzed by GC-FID. As the results, the ratio of CNT/TiO2 loaded on the paper filter at 1:10 showed the highest performance by up to 45%, while the ratio of CNT/TiO2 at 1:15 showed 30% and CNT/TiO2 at 1:5 was the lowest of 22%, respectively. This is because adding the optimum CNT to TiO2 can be improved the adsorption efficiency and the ability to degrade benzene from cigarette smoke. Additionally, CNT also assists in reducing the recombination of TiO2 particles that effect to the high performance on the photocatalytic activity. Therefore, the prepared CNT/TiO2/PVA loaded on the paper filter could be used for the air treatment.

scholarly journals Synthesis of silver nanoparticles embedded with single-walled carbon nanotubes for printable elastic electrodes and sensors with high stability

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jae-Won Lee ◽  
Joon Young Cho ◽  
Mi Jeong Kim ◽  
Jung Hoon Kim ◽  
Jong Hwan Park ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Silver Nanoparticles ◽  
High Performance ◽  
Composite Films ◽  
Single Walled Carbon Nanotubes ◽  
Gauge Factor ◽  
Time Interval ◽  
Single Walled Carbon ◽  
Irradiation Energy ◽  
Walled Carbon Nanotubes

AbstractSoft electronic devices that are bendable and stretchable require stretchable electric or electronic components. Nanostructured conducting materials or soft conducting polymers are one of the most promising fillers to achieve high performance and durability. Here, we report silver nanoparticles (AgNPs) embedded with single-walled carbon nanotubes (SWCNTs) synthesized in aqueous solutions at room temperature, using NaBH4 as a reducing agent in the presence of highly oxidized SWCNTs as efficient nucleation agents. Elastic composite films composed of the AgNPs-embedded SWCNTs, Ag flake, and polydimethylsiloxane are irradiated with radiation from a Xenon flash lamp within a time interval of one second for efficient sintering of conductive fillers. Under high irradiation energy, the stretchable electrodes are created with a maximum conductivity of 4,907 S cm−1 and a highly stretchable stability of over 10,000 cycles under a 20% strain. Moreover, under a low irradiation energy, strain sensors with a gauge factor of 76 under a 20% strain and 5.4 under a 5% strain are fabricated. For practical demonstration, the fabricated stretchable electrode and strain sensor are attached to a human finger for detecting the motions of the finger.

Synergistic effect of carbon nanotubes and graphitic carbon nitride on the enhanced supercapacitor performance of cobalt diselenide-based composites

2021 ◽  
Author(s):  
Mingjie Li ◽  
Xuan Zheng ◽  
Xiang Li ◽  
Youjun Yu ◽  
Jinlong Jiang
Keyword(s):  
Carbon Nanotubes ◽  
Transition Metal ◽  
Synergistic Effect ◽  
Hydrothermal Method ◽  
High Performance ◽  
Carbon Nitride ◽  
Electrode Materials ◽  
One Dimensional ◽  
Supercapacitor Performance ◽  
Metal Selenides

Recently, transition metal selenides have been investigated extensively as promising electrode materials for high-performance supercapacitors. Herein, the multi-component CoSe2/CNTs@g-C3N4 composites are prepared using a two-step hydrothermal method by incorporating one-dimensional...

scholarly journals SnS2/TiO2 Nanocomposites for Hydrogen Production and Photodegradation Under Extended Solar Irradiation

Catalysts ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 589
Author(s):  
Sivagowri Shanmugaratnam ◽  
Balaranjan Selvaratnam ◽  
Aravind Baride ◽  
Ranjit Koodali ◽  
Punniamoorthy Ravirajan ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Hydrogen Evolution ◽  
Environmental Remediation ◽  
High Performance ◽  
Degradation Mechanism ◽  
Solar Irradiation ◽  
Earth Abundant ◽  
Improved Performance ◽  
Chalcogenide Materials

Earth–abundant transition metal chalcogenide materials are of great research interest for energy production and environmental remediation, as they exhibit better photocatalytic activity due to their suitable electronic and optical properties. This study focuses on the photocatalytic activity of flower-like SnS2 nanoparticles (composed of nanosheet subunits) embedded in TiO2 synthesized by a facile hydrothermal method. The materials were characterized using different techniques, and their photocatalytic activity was assessed for hydrogen evolution reaction and the degradation of methylene blue. Among the catalysts studied, 10 wt. % of SnS2 loaded TiO2 nanocomposite shows an optimum hydrogen evolution rate of 195.55 µmolg−1, whereas 15 wt. % loading of SnS2 on TiO2 exhibits better performance against the degradation of methylene blue (MB) with the rate constant of 4.415 × 10−4 s−1 under solar simulated irradiation. The improved performance of these materials can be attributed to the effective photo-induced charge transfer and reduced recombination, which make these nanocomposite materials promising candidates for the development of high-performance next-generation photocatalyst materials. Further, scavenging experiments were carried out to confirm the reactive oxygen species (ROS) involved in the photocatalytic degradation. It can be observed that there was a 78% reduction in the rate of degradation when IPA was used as the scavenger, whereas around 95% reduction was attained while N2 was used as the scavenger. Notably, very low degradation (<5%) was attained when the dye alone was directly under solar irradiation. These results further validate that the •OH radical and the superoxide radicals can be acknowledged for the degradation mechanism of MB, and the enhancement of degradation efficiency may be due to the combined effect of in situ dye sensitization during the catalysis and the impregnation of low bandgap materials on TiO2.

Sign in / Sign up

Export Citation Format

Share Document