X-Ray Induced Depth Profiling of Ion Implantations into Various Semiconductor Materials

2012 ◽  
Vol 195 ◽  
pp. 274-276 ◽  
Author(s):  
Philipp Hönicke ◽  
Matthias Müller ◽  
Burkhard Beckhoff
Keyword(s):  
Ion Implantation ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Measurement Techniques ◽  
Depth Profiling ◽  
Low Energy ◽  
Semiconductor Materials ◽  
Leakage Currents ◽  
X Ray ◽  
20 Nm

The continuing shrinking of the component dimensions in ULSI technology requires junction depths in the 20-nm regime and below to avoid leakage currents. These ultra shallow dopant distributions can be formed by ultra-low energy (ULE) ion implantation. However, accurate measurement techniques for ultra-shallow dopant profiles are required in order to characterize ULE implantation and the necessary rapid thermal annealing (RTA) processes.

GROWTH OF SiC NANOSTRUCTURES ON Si (100) USING LOW ENERGY CARBON ION IMPLANTATION AND ELECTRON BEAM RAPID THERMAL ANNEALING

2004 ◽  
Vol 03 (04n05) ◽  
pp. 425-430 ◽  
Author(s):  
A. MARKWITZ ◽  
S. JOHNSON ◽  
M. RUDOLPHI ◽  
H. BAUMANN
Keyword(s):  
Atomic Force Microscopy ◽  
Electron Beam ◽  
Ion Implantation ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Low Energy ◽  
Silicon Surfaces ◽  
Force Microscopy ◽  
Atomic Force ◽  
Implantation Fluence

A combination of 10 keV 13 C low energy ion implantation and electron beam rapid thermal annealing (EB-RTA) is used to fabricate silicon carbide nanostructures on (100) silicon surfaces. These large ellipsoidal features appear after EB-RTA at 1000°C for 15 s. Prior to annealing, the silicon surfaces are virgin-like flat. Atomic force microscopy was used to study the morphology of these structures and it was found that the diameter and number of nanoboulders are linearly dependent on the implantation fluence. Further, a linear relationship between nanoboulder diameter and spacing suggests crystal coarsening is a fundamental element in the growth mechanism.

Doping properties of the Ion-Beam-Sputtered SiGe Film

1996 ◽  
Vol 441 ◽  
Author(s):  
Wen-Jie Qi ◽  
Zhi-Sheng Wang ◽  
Zhi-Guang Gu ◽  
Guo-Ping Ru ◽  
Guo-Bao Jialig ◽  
...  
Keyword(s):  
Ion Implantation ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Ion Beam ◽  
X Ray Diffraction ◽  
Electrical Measurements ◽  
Polycrystalline Structure ◽  
X Ray ◽  
Post Annealing ◽  
And Diffusion

AbstractThe ion-beam-sputtered polycrystalline SiGe film and its doping properties have been studied. Boron and phosphorus have been doped into the sputtered poly-SiGe film by ion implantation and diffusion. To activate the implanted impurities, both rapid thermal annealing and fiirnace annealing have been used. The electrical measurements show that boron and plhosphorus can be doped into sputtered SiGe films and effectively activated by both ion implantation with post-annealing and diffiision. Hall mobilities as high as 31 cm2/V-s and 20 cm2/V.s have been obtained in B-difflhsed and P-diffused SiGe films, respectively. The x-ray diffraction spectra of the sputtered Sifie filhn show its typical polycrystalline structure with (111), (220) and (311) as the preferential orientations.

Shallow Junctions for Sub-100 Nm Cmos Technology

2001 ◽  
Vol 669 ◽  
Author(s):  
Veerle Meyssen ◽  
Peter Stolk ◽  
Jeroen van Zijl ◽  
Jurgen van Berkum ◽  
Willem van de Wijgert ◽  
...  
Keyword(s):  
Ion Implantation ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Cmos Technology ◽  
Low Energy ◽  
Annealing Conditions ◽  
Delta Doping ◽  
Shallow Junctions ◽  
P Type ◽  
Spike Annealing

ABSTRACTThis paper studies the use of ion implantation and rapid thermal annealing for the fabrication of shallow junctions in sub-100 nm CMOS technology. Spike annealing recipes were optimized on the basis of delta-doping diffusion experiments and shallow junction characteristics. In addition, using GeF2 pre-amorphization implants in combination with low-energy BF2 and spike annealing, p-type junctions depths of 30 nm were obtained with sheet resistances as low as 390 Ω/sq. The combined finetuning of implantation and annealing conditions is expected to enable junction scaling into the 70-nm CMOS technology node.

GaAs/AlGaAs Quantum Well Mixing Using Low Energy Ion Implantation and Rapid Thermal Annealing

1988 ◽  
Vol 144 ◽  
Author(s):  
B. Elman ◽  
Emil S. Koteles ◽  
P. Melman ◽  
C. A. Armiento
Keyword(s):  
Ion Implantation ◽  
Quantum Wells ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Ion Beam ◽  
Low Energy ◽  
Exciton Transition ◽  
Transition Energies ◽  
Diffusion Of Vacancies ◽  
Implantation Fluence

ABSTRACTLow energy ion implantation followed by rapid thermal annealing (RTA) was utilized to modify exciton transition energies of MBE- rown GaAs/AlGaAs quantum wells (QW). The samples were irradiated with an 75As ion beam with an energy low enough that the depth of the disordered region was spatially separated from the QWs. After RTA, exciton energies (determined using optical spectroscopy) showed large increases which were dependent on QW widths and the implantation fluence with no significant increases in peak linewidths. These energy shifts were interpreted as resulting from the modification of the shapes of the as-grown QWs from square (abrupt interfaces) to rounded due to enhanced Ga and Al interdiffusion in irradiated areas. These results are similar to our data on the RTA of the same structures capped with SiO2 and are consistent with the model of enhanced intermixing of Al and Ga atoms due to diffusion of vacancies generated near the surface.

Rapid Thermal Annealing of Low-Energy P and B Implants in Silicon, Optimized by High Resolution X-Ray Diffraction

1994 ◽  
Vol 342 ◽  
Author(s):  
Jos G.E. Klappe ◽  
István Bársony ◽  
Pierre H. Woerlee ◽  
Tom W. Ryan ◽  
P. Alkemade
Keyword(s):  
High Resolution ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Defect Formation ◽  
Simulation Software ◽  
Low Energy ◽  
X Ray Diffraction ◽  
Furnace Annealing ◽  
X Ray ◽  
Dopant Atoms

ABSTRACTIn this paper, low-energy (45 keV) implantations of phosphorous and boron into silicon were studied. A comparison of doping profiles, secondary defect formation, electrical activation and diode leakage was made between Rapid Thermal Annealing (RTA) and conventional furnace annealing. The samples were analysed by High-Resolution X-Ray Diffraction (HR-XRD), X-TEM, SIMS, spreading resistance (SRP) and sheet resistance measurements.The non-destructive HR-XRD technique combined with the novel simulation software was a very useful tool for the defect characterisation and for the choice of the optimum annealing temperature. Furthermore estimations of electrically active dopant atoms were made with HR-XRD by measurement of the strain. With RTA a substitutional dopant concentration of a factor 2 to 4 higher than with furnace annealing can be obtained, for P and B respectively. Electrical measurements show that not all of the substitutional dopants are electrically active, however. Thus estimates of the electrically active dopant atoms with HR-XRD require further study. Furthermore it appeared that RTA was superior to furnace anneal for lowering sheet resistances, defect removal and dopant profile broadening. However, furnace anneal gave the best results for diode leakage currents. This indicates that RTA processing needs to be further refined or that combined RTA/furnace processes need to be developed.

Properties of the TiSi2/p+nstructures formed by ion implantation through silicide and rapid thermal annealing

1992 ◽  
Vol 72 (1) ◽  
pp. 73-77 ◽  
Author(s):  
H. B. Erzgräber ◽  
P. Zaumseil ◽  
E. Bugiel ◽  
R. Sorge ◽  
K. Tittelbach‐Helmrich ◽  
...  
Keyword(s):  
Ion Implantation ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing

Correlation Between Defect Characteristics and Layer Intermixing in Si Implanted GaAs/AIGaAs Superlattices

1989 ◽  
Vol 147 ◽  
Author(s):  
Samuel Chen ◽  
S.-Tong Lee ◽  
G. Braunstein ◽  
G. Rajeswaran ◽  
P. Fellinger
Keyword(s):  
Ion Implantation ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Peak Position ◽  
Compound Semiconductor ◽  
Subsequent Annealing ◽  
Semiconductor Superlattices ◽  
Furnace Annealing ◽  
Annealing Conditions ◽  
Induced Defects

AbstractDefects induced by ion implantation and subsequent annealing are found to either promote or suppress layer intermixing in Ill-V compound semiconductor superlattices (SLs). We have studied this intriguing relationship by examining how implantation and annealing conditions affect defect creation and their relevance to intermixing. Layer intermixing has been induced in SLs implanted with 220 keV Si+ at doses < 1 × 1014 ions/cm2 and annealed at 850°C for 3 hrs or 1050°C for 10 s. Upon furnace annealing, significant Si in-diffusion is observed over the entire intermixed region, but with rapid thermal annealing layer intermixing is accompanied by negligible Si movement. TEM showed that the totally intermixed layers are centered around a buried band of secondary defects and below the Si peak position. In the nearsurface region layer intermixing is suppressed and is only partially completed at ≤1 × 1015 Si/cm2. This inhibition is correlated to a loss of the mobile implantation-induced defects, which are responsible for intermixing.

Sign in / Sign up

Export Citation Format

Share Document