Growth Peculiarities and Magnetic Properties of (LuBi)3Fe5O12 Films by LPE Method

2013 ◽  
Vol 200 ◽  
pp. 256-260 ◽  
Author(s):  
I.I. Syvorotka ◽  
Igor M. Syvorotka ◽  
S.B. Ubizskii
Keyword(s):  
Magnetic Properties ◽  
Liquid Phase ◽  
Surface Morphology ◽  
Film Thickness ◽  
Faraday Rotation ◽  
Liquid Phase Epitaxy ◽  
Magnetization Reversal ◽  
Room Temperature ◽  
Mirror Surface ◽  
Different Types

The series of (LuBi)3Fe5O12 film were grown on (111) oriented GGG substrate with diameters 1, 2 and 3 inch by liquid phase epitaxy using Bi2O3-base flux. Different types of surface morphology on the grown films were observed. The films’ surface was smooth and mirror while the film thickness was less than 13 μm and becomes rough for thickness above this value. The grown films were characterized by measuring magnetization loops and magneto-optic Faraday rotation under magnetization reversal as well as ferromagnetic resonance (FMR). All films with mirror surface demonstrate the in-plane magnetization, high Faraday rotation and FMR linewidth about 0.8 Oe at 9.1 GHz and room temperature.

Liquid-phase-epitaxy-grown InAsxSb1−x∕GaAs for room-temperature 8–12μm infrared detectors

2006 ◽  
Vol 88 (24) ◽  
pp. 242108 ◽  
Author(s):  
Changtao Peng ◽  
NuoFu Chen ◽  
Fubao Gao ◽  
Xingwang Zhang ◽  
Chenlong Chen ◽  
...  
Keyword(s):  
Liquid Phase ◽  
Liquid Phase Epitaxy ◽  
Infrared Detectors ◽  
Room Temperature

scholarly journals Surface morphology analysis of GaInAsSb films grown by liquid phase epitaxy

2006 ◽  
Vol 36 (3b) ◽  
pp. 1070-1073 ◽  
Author(s):  
L. Tirado-Mejía ◽  
J. G. Ramírez ◽  
M. E. Gómez ◽  
H. Ariza-Calderón
Keyword(s):  
Liquid Phase ◽  
Surface Morphology ◽  
Liquid Phase Epitaxy ◽  
Morphology Analysis

Hg1−x−yMnxCdyTe Alloys for 1.3−1.8 μm Photodiode Applications

1986 ◽  
Vol 89 ◽  
Author(s):  
S. H. Shin ◽  
J. G. Pasko ◽  
D. S. Lo ◽  
W. E. Tennant ◽  
J. R. Anderson ◽  
...  
Keyword(s):  
Liquid Phase ◽  
Liquid Phase Epitaxy ◽  
Room Temperature ◽  
Reverse Bias ◽  
Fiber Optic ◽  
Superior Performance ◽  
Device Performance ◽  
Device Structure ◽  
Cdte Substrate ◽  
P Type

AbstractHgMnCdTe/CdTe photodiodes with responsivity cutoffs of up to 1.54 pm have been fabricated by liquid phase epitaxy (LPE). The mesa device structure consists of a boron-implanted mosaic fabricated on a p-type Hg1−x−yMnxCdyTe layer grown on a CdTe substrate. A reverse breakdown voltage (VB) of 50 V and a leakage current density of 1.5 × 10−4 A/cm2 at V = −10 V was measured at room temperature (295K). A 0.75 pF capacitance was also measured under a 5 V reverse bias at room temperature. This device performance based on the quaternary HgMnCdTe shows both theoretical and practical promise of superior performance for wavelengths in the range 1.3 to 1.8 μm for fiber optic applications.

Thick Epitaxial YIG Films with Narrow FMR Linewidth

2013 ◽  
Vol 200 ◽  
pp. 250-255 ◽  
Author(s):  
Igor I. Syvorotka ◽  
I.M. Syvorotka ◽  
Sergii B. Ubizskii
Keyword(s):  
Liquid Phase ◽  
Surface Morphology ◽  
Yttrium Iron Garnet ◽  
Film Growth ◽  
Morphological Changes ◽  
Thick Films ◽  
Mirror Surface ◽  
Yttrium Iron ◽  
Iron Garnet ◽  
La Doped

The La-doped yttrium iron garnet (YIG) films with thickness up to 130 μm were grown by liquid phase epitaxy (LPE) method. All grown thick films demonstrate “mirror” and “striation” types of surface morphology that depend from film growth temperature and thickness. Addition of B2O3 is favourable to a change the surface morphology into a “mirror” one. The mechanisms of the morphological changes are discussed. It was found that the ferromagnetic resonance (FMR) linewidth appreciably depends from surface morphology of grown films. For thick films with “mirror” surface the FMR linewidth is less than 0.8 Oe and more than ten times less in comparison with films with “striation” surface.

Effects of growth temperature on the surface morphology of silicon thin films on (111) silicon monocrystalline substrate by liquid phase epitaxy

2004 ◽  
Vol 266 (4) ◽  
pp. 467-474 ◽  
Author(s):  
Toru Ujihara ◽  
Eiji Kanda ◽  
Kazuo Obara ◽  
Kozo Fujiwara ◽  
Noritaka Usami ◽  
...  
Keyword(s):  
Thin Films ◽  
Liquid Phase ◽  
Surface Morphology ◽  
Liquid Phase Epitaxy ◽  
Growth Temperature ◽  
Silicon Thin Films

Liquid phase epitaxy (LPE) grown Bi, Ga, Al substituted iron garnets with huge Faraday rotation for magneto-optic applications

2004 ◽  
Vol 201 (7) ◽  
pp. 1398-1402 ◽  
Author(s):  
P. G�rnert ◽  
T. Aichele ◽  
A. Lorenz ◽  
R. Hergt ◽  
J. Taubert
Keyword(s):  
Liquid Phase ◽  
Faraday Rotation ◽  
Liquid Phase Epitaxy ◽  
Iron Garnets ◽  
Magneto Optic

LPE Growth of Textured KNbO3 Film Using SrTiO3 Substrate and V2O5 Flux

2006 ◽  
Vol 11-12 ◽  
pp. 109-112
Author(s):  
T. Hibino ◽  
Kenichi Kakimoto ◽  
Hitoshi Ohsato
Keyword(s):  
Thin Films ◽  
Phase Diagram ◽  
Growth Rate ◽  
Liquid Phase ◽  
Surface Morphology ◽  
Liquid Phase Epitaxy ◽  
Growth Temperature ◽  
Film Growth ◽  
Lower Growth ◽  
Lower Growth Temperature

KNbO3 thin films were grown on (100) and (110) SrTiO3 substrates by liquid phase epitaxy (LPE) technique. The film orientation and surface morphology were characterized by XRD and AFM, respectively. The limited phase diagram of K2O-Nb2O5-V2O5 system was prepared by DTA measurement to investigate the effect of V2O5 flux on the LPE growth of KNbO3 film. The use of V2O5 flux enhanced a film growth rate at lower growth temperature.

Suppression of Ferromagnetic Ordering in thicker co-sputtered Mn doped MgO Films

2013 ◽  
Vol 1552 ◽  
pp. 83-88 ◽  
Author(s):  
Sreekanth K. Mahadeva ◽  
Zhi-Yong Quan ◽  
J. C. Fan ◽  
K. S. Sreelatha ◽  
L. Belova ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Film Thickness ◽  
Saturation Magnetization ◽  
Room Temperature ◽  
Structural Surface ◽  
Ferromagnetic Ordering ◽  
Surface Morphologies ◽  
Mn Doped ◽  
Different Thickness

ABSTRACTWe report on preliminary studies of low (14 at.%) and high (53at.%) concentration Mn doped MgO films deposited by co-sputtering from metallic Mn and Mg targets. The structural, surface morphologies and magnetic properties of the films of different thickness were studied. All the as grown films are found to be amorphous and film surfaces are found to be flawless and homogeneous. We observe at room temperature robust ferromagnetic loops with a saturation magnetization value that is a function of film thickness reaching a maximum of ∼38.5 emu/cm3 in the Mn0.53Mg0.47O film at a thickness of ∼92 nm. In thicker films room-temperature ferromagnetic ordering is suppressed and eventually at a thickness around 120nm the expected diamagnetism of the bulk appears. The origin of ferromagnetism may be attributed to cation defects at the Mg-site.

Sign in / Sign up

Export Citation Format

Share Document