Calculation of Mechanical Fracture Parameters of Chevron Notched Core Based Concrete Specimen: Software CheF

2018 ◽  
Vol 272 ◽  
pp. 185-188
Author(s):  
Barbora Svobodova ◽  
Hana Šimonová ◽  
Zbyněk Keršner
Keyword(s):  
Mouth Opening ◽  
Concrete Specimen ◽  
Crack Mouth Opening Displacement ◽  
Opening Displacement ◽  
Mechanical Fracture ◽  
Three Point Bending ◽  
Java Programming ◽  
Linear Elastic ◽  
Fracture Parameters ◽  
Fracture Tests

The structural concrete can be also characterized via parameters obtained by evaluation of fracture tests. Therefore, this paper presents software CheF developed in Java programming language, designed for evaluation of three-point bending fracture tests of core based concrete specimens with chevron type notch. The records of fracture tests in form load vs. displacement and load vs. crack mouth opening displacement diagrams are analysed by software CheF to obtain values of selected mechanical fracture parameters: modulus of elasticity E, fracture toughness KIc, and fracture energy GF, determined based on the linear elastic fracture mechanics approach and work-of-fracture method.

Evaluation of Fracture Tests of Concrete Specimens via Advanced Tool for Experimental Data Processing

2016 ◽  
Vol 821 ◽  
pp. 585-590 ◽  
Author(s):  
Ivana Havlikova ◽  
Petr Frantik ◽  
Jan Masek ◽  
Jakub Sobek ◽  
Hana Šimonová ◽  
...  
Keyword(s):  
Building Materials ◽  
Mouth Opening ◽  
Software Tool ◽  
Crack Mouth Opening Displacement ◽  
Data Filtering ◽  
Opening Displacement ◽  
Experimental Data Processing ◽  
Mechanical Fracture ◽  
Fracture Tests ◽  
Advanced Tool

Cement-based composites are traditionally used building materials. Concrete is the basic representative of this type of materials which exhibit the so called quasi-brittle response. Quantification of mechanical fracture parameters is performed using fracture tests on specimens with a stress concentrator. Load versus crack mouth opening displacement (P–CMOD) diagrams are recorded during these tests. In order to correctly evaluate these diagrams, an advanced own developed software tool was used for the data filtering and appropriate modifications. In this paper, the programmed Java utility is generally introduced and its utilization demonstrated on the set of recorded P–CMOD diagrams, which are further evaluated using Double-K fracture model.

scholarly journals Vibrated Concrete vs. Self-Compacting Concrete: Comparison of Fracture Mechanics Properties

2014 ◽  
Vol 601 ◽  
pp. 199-202
Author(s):  
Sara Korte ◽  
Veerle Boel ◽  
Wouter de Corte ◽  
Geert de Schutter
Keyword(s):  
Fracture Mechanics ◽  
Mouth Opening ◽  
Bending Test ◽  
Crack Mouth Opening Displacement ◽  
Self Compacting Concrete ◽  
Opening Displacement ◽  
Three Point Bending ◽  
Fracture Parameters ◽  
Wedge Splitting Test ◽  
Splitting Test

This study focuses on the fracture mechanics aspect of self-compacting concrete, compared to vibrated concrete. The most commonly used experiments to investigate the toughness and cracking behaviour of concrete are the three-point bending test (3PBT) on small, notched beams, and the wedge-splitting test (WST) on cubic samples with guiding groove and starter notch. From the resulting P-CMOD curves (applied load versus crack mouth opening displacement), different fracture parameters, such as fracture energy and fracture toughness, can be extracted. Moreover, using inverse analysis, the σ-w relationship (tensile stress versus crack width) can be derived. This paper lists the results of a series of tests on samples, made of VC, SCC of equal strength, and SCC with identical w/c factor. Subsequently, a comparison of the mechanical characteristics is made, revealing important differences regarding several fracture parameters.

scholarly journals Components of the Fracture Response of Alkali-Activated Slag Composites with Steel Microfibers

2019 ◽  
Vol 9 (9) ◽  
pp. 1754 ◽  
Author(s):  
Hana Šimonová ◽  
Petr Frantík ◽  
Zbyněk Keršner ◽  
Pavel Schmid ◽  
Pavel Rovnaník
Keyword(s):  
Mouth Opening ◽  
Crack Mouth Opening Displacement ◽  
Model Parameters ◽  
Crack Model ◽  
Mechanical Fracture ◽  
Alkali Activated Slag ◽  
Fracture Parameters ◽  
Fracture Tests ◽  
Activated Slag ◽  
Alkali Activated

Knowledge of the mechanical and primarily fracture parameters of composites with a brittle matrix is essential for the quantification of their resistance to crack initiation and growth, and also for the specification of material model parameters employed for the simulation of the quasi-brittle behavior of structures made from this type of composite. Therefore, the main target of this paper is to quantify the mechanical fracture parameters of alkali-activated slag composites with steel microfibers and the contribution of the matrix to their fracture response. The first alkali-activated slag composite was a reference version without fibers; the others incorporated steel microfibers amounting to 5, 10, 15 and 20% by weight of the slag. Prism specimens with an initial central edge notch were used to perform the three-point bending fracture tests. Load vs. displacement (deflection at midspan) and load vs. crack mouth opening displacement diagrams were recorded during the fracture tests. The obtained diagrams were employed as inputs for parameter identification, the aim of which was to transfer the fracture test response data to the desired material parameters. Values were also determined for fracture parameters using the effective crack model, work-of-fracture method and double-K fracture model. All investigated mechanical fracture parameters were improved by the addition of steel microfibers to the alkali-activated matrix. Based on the obtained results, the addition of 10 to 15% of microfibers by weight is optimal from the point of view of the enhancement of the fracture parameters of alkali-activated slag composite.

scholarly journals Fracture parameters of fly ash geopolymer mortars with carbon black and graphite filler

2021 ◽  
Vol 1205 (1) ◽  
pp. 012019
Author(s):  
H Simonova ◽  
C Mizerova ◽  
P Rovnanik ◽  
M Lipowczan ◽  
P Schmid
Keyword(s):  
Fly Ash ◽  
Carbon Black ◽  
Mouth Opening ◽  
Bending Test ◽  
Crack Mouth Opening Displacement ◽  
Crack Model ◽  
Vertical Force ◽  
Opening Displacement ◽  
Mechanical Fracture ◽  
Fracture Parameters

Abstract In this study, the effect of carbon black and graphite filler on the crack initiation and fracture parameters of fly ash geopolymer mortar is investigated. The carbon black was added in the amount of 0.5 and 1.0% and graphite powder in the amount of 5 and 10% relative to the fly ash mass. The reference mixture without any filler was also prepared. The fracture characteristics were determined based on the results of the three-point bending test of prismatic specimens provided with an initial central edge notch. The fracture experiments were conducted at the age of 48 days. The vertical force (F), the displacement measured in the middle of the span length (d), and the crack mouth opening displacement (CMOD) were continuously recorded during the test. The records of fracture tests were subsequently evaluated using the effective crack model, work-of-fracture method, and double-K fracture model. The addition of both fine fillers led to a decrease in monitored mechanical fracture parameters in comparison with reference mortar.

The Effect of Concrete Quality on the Acoustic Emission Parameters during Three-Point Bending Fracture Test

2014 ◽  
Vol 897 ◽  
pp. 149-152 ◽  
Author(s):  
Michal Matysík ◽  
Libor Topolář ◽  
Petr Daněk ◽  
Tomáš Vymazal ◽  
Iveta Plšková
Keyword(s):  
Acoustic Emission ◽  
Large Scale ◽  
Mouth Opening ◽  
Crack Mouth Opening Displacement ◽  
Fracture Test ◽  
Opening Displacement ◽  
Three Point Bending ◽  
Fracture Tests ◽  
Stress Behaviour ◽  
Bending Fracture

Acoustic emission is an experimental tool well suited for monitoring fracture processes. The paper presents experiment focused on analysing acoustic emission signals captured during three-point bending fracture test of specimens of concrete. Quantitative acoustic emission techniques were used to measure micro fracture properties. For three different concrete mixtures typical acoustic emission patterns were identified in the acoustic emission records to further describe the under-the-stress behaviour and failure development. If we have a better understanding of the relationships between micro structural events and macroscopic behaviour we can better formulate predictive models for large-scale structural performance and reliability. An understanding of microstructureperformance relationships is the key to true understanding of material behaviours. Three-point bending fracture tests were conducted on these specimens and load versus crack mouth opening displacement (Load-CMOD) diagrams were recorded during the testing.

Evaluation of Three-Point Bending Fracture Tests of Selected Concrete: Crack Initiation and Acoustic Emission Parameters

2017 ◽  
Vol 259 ◽  
pp. 58-63
Author(s):  
Hana Šimonová ◽  
Libor Topolář ◽  
Ivana Havlíková ◽  
Michal Matysík ◽  
Petr Daněk ◽  
...  
Keyword(s):  
Acoustic Emission ◽  
Crack Initiation ◽  
Mouth Opening ◽  
Crack Mouth Opening Displacement ◽  
Opening Displacement ◽  
Unstable Crack ◽  
Three Point Bending ◽  
Damage Process ◽  
Fracture Tests ◽  
Bending Fracture

In this paper, authors concentrate attention on crack initiation and acoustic emission (AE) parameters obtained from records of three-point bending fracture tests on eight sets of concrete specimens with initial stress concentrator at the age of 28 days. Resistance to stable and unstable crack propagation was quantified via evaluation of load vs crack mouth opening displacement diagrams using Double-K fracture model. The AE technique was used to monitor damage process taking place during testing in specimens.

Comparison of Fracture Tests Numerical Models Created with Real Material Properties

2018 ◽  
Vol 774 ◽  
pp. 601-606
Author(s):  
Jiří Klon ◽  
Jakub Sobek
Keyword(s):  
Material Properties ◽  
Numerical Models ◽  
Mouth Opening ◽  
Compact Tension ◽  
Crack Mouth Opening Displacement ◽  
Opening Displacement ◽  
Three Point Bending ◽  
Real Material ◽  
Splitting Test ◽  
Fracture Tests

This contribution discusses numerical models of three different fracture tests – three-point bending (3PB), modified compact tension (modCT) and wedge-splitting test (WST). The aim is to compare loading diagrams (loading force vs. crack mouth opening displacement) obtained from these numerical models, created with real material properties. These properties were acquired from experimental data measurement. To assemble the numerical models, ATENA Science FEM software was used. In this software, damaging of the structure/specimen occurred by cracks can be modelled, their initiation and progressive propagation can be seen throughout the loading process.

Effects of Weld Strength Mismatch on Estimation Procedures for J and CTOD Fracture Parameters Using SE(B) Specimens

2007 ◽  
Author(s):  
Gustavo H. B. Donato ◽  
Claudio Ruggieri
Keyword(s):  
Mouth Opening ◽  
Estimation Procedure ◽  
Primary Objective ◽  
Weld Strength ◽  
Crack Mouth Opening Displacement ◽  
Opening Displacement ◽  
Fracture Parameters ◽  
Wide Range ◽  
Estimation Procedures ◽  
Fracture Specimens

This work presents an exploratory development of J and CTOD estimation procedures for welded fracture specimens under bending based upon plastic eta factors and plastic rotation factors. The techniques considered include: i) estimating J and CTOD from plastic work and ii) estimating CTOD from the plastic rotational factor. The primary objective is to gain additional understanding on the effect of weld strength mismatch on estimation techniques to determine J and CTOD fracture parameters for a wide range of a/W-ratios and mismatch levels. Very detailed non-linear finite element analyses for plane-strain models of SE(B) fracture specimens with center cracked, square groove welds provide the evolution of load with increased load-line displacement and crack mouth opening displacement which are required for the estimation procedure. The results show that levels of weld strength mismatch within the range ±20% mismatch do not affect significantly J and CTOD estimation expressions applicable to homogeneous materials, particularly for deeply cracked fracture specimens. The present analyses, when taken together with previous studies, provide a fairly extensive body of results which serve to determine parameters J and CTOD for different materials using bend specimens with varying geometries and mismatch levels.

Fracture Resistance of AAAS Composites with Ceramic Precursor

2021 ◽  
Vol 322 ◽  
pp. 54-59
Author(s):  
Iva Rozsypalová ◽  
Petr Daněk ◽  
Pavla Rovnaníková ◽  
Zbyněk Keršner
Keyword(s):  
Mouth Opening ◽  
Crack Model ◽  
Arithmetic Means ◽  
Mechanical Fracture ◽  
Three Point Bending ◽  
Static Modulus ◽  
Fracture Parameters ◽  
Ceramic Precursors ◽  
Static Modulus Of Elasticity

The paper deals with selected alkali-activated aluminosilicate (AAAS) composites based on ceramic precursors in terms of their characterization by mechanical fracture parameters. Composites made of brick dust as a precursor and an alkaline activator with a silicate modulus of Ms = 0.8, 1.0, 1.2, 1.4 and 1.6 were investigated. The filler employed with one set of composites was quartz sand, while for the other set it was crushed brick. The test specimens had nominal dimensions of 40 × 40 × 160 mm and were provided with notches at midspan of up to 1/3 of the height of the specimens after 28 days. 6 samples from each composite were tested. The specimens were subjected to three-point bending tests in which force vs. displacement (deflection at midspan) diagrams (F–d diagrams) and force vs. crack mouth opening (F–CMOD) diagrams were recorded. After the correction of these diagrams, static modulus of elasticity, effective fracture toughness, effective toughness and specific fracture energy values were determined using the Effective Crack Model and the Work-of-Fracture method. After the fracture experiments, informative compressive strength values were determined from one of the parts. All of the evaluations included the determination of arithmetic means and standard deviations. The silicate modulus values and type of filler of the AAAS composites significantly influenced their mechanical fracture parameters.

Fracture Response of Fine-Grained Cement-Based Composite Specimens with Special Inclusions

2019 ◽  
Vol 292 ◽  
pp. 63-68 ◽  
Author(s):  
Michal Vyhlídal ◽  
Iva Rozsypalová ◽  
Tomáš Majda ◽  
Petr Daněk ◽  
Hana Šimonová ◽  
...  
Keyword(s):  
Transition Zone ◽  
Interfacial Transition Zone ◽  
Mechanical Fracture ◽  
Three Point Bending ◽  
Fine Grained ◽  
Fracture Parameters ◽  
Edge Notch ◽  
Fracture Tests ◽  
Materials Used ◽  
Bending Fracture

This paper concerns research into the importance of the interfacial transition zone around inclusions of selected materials in fine-grained cement-based composite. Tests were performed on eight sets of prismatic test specimens. The sets differed in the inclusion materials used, which were placed at midspan above the initial central edge notch. The first was a reference set without any inclusion, the second contained a steel inclusion, four more contained different types of rock inclusion, the seventh contained an inclusion of extruded polystyrene, and the last contained a space of the same dimensions as that occupied by the inclusions in sets 2 to 7. The test specimens were subjected to three-point bending fracture tests at the age of (usually) 28 days. The fracture response was analysed by means of fracture mechanics theory, and apparent mechanical fracture parameters (modulus of elasticity, fracture toughness and fracture energy) were evaluated. The conclusion shows that a possible relationship exists between the differences in the mechanical fracture parameters of specimens with/without an inclusion and the existence of the interfacial transition zone.

Sign in / Sign up

Export Citation Format

Share Document