SEM Studies on the Microstructure and Phase Composition Distribution in Cr3C2 + TiC Claddings on Low-Carbon Steel

2020 ◽  
Vol 303 ◽  
pp. 59-66
Author(s):  
Konstantin V. Ivanov ◽  
Vladimir E. Ovcharenko
Keyword(s):  
Electron Microscopy ◽  
Phase Composition ◽  
Carbon Steel ◽  
Structural Parameters ◽  
Low Carbon Steel ◽  
Relativistic Energy ◽  
Low Carbon ◽  
Composition Distribution ◽  
X Ray ◽  
Scanning Electron

Using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) we studied the distribution of structural parameters, phase composition and alloying elements concentration across the coatings obtained by cladding of chromium and titanium carbides mixture on low-carbon steel. The beam of relativistic energy electrons extracted into the atmosphere was used to form the coatings. The homogeneity in the allying elements distribution is shown to be defined by the lifetime of the melt bath while the phase composition distribution depends on the thickness of the melt layer. Both above parameters are determined by the density of the entered energy.

scholarly journals Dislocation densities in a low-carbon steel during martensite transformation determined by in situ high energy X-Ray diffraction

2021 ◽  
Vol 800 ◽  
pp. 140249
Author(s):  
Juan Macchi ◽  
Steve Gaudez ◽  
Guillaume Geandier ◽  
Julien Teixeira ◽  
Sabine Denis ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Martensite Transformation ◽  
Low Carbon Steel ◽  
High Energy ◽  
Low Carbon ◽  
X Ray Diffraction ◽  
X Ray ◽  
Dislocation Densities

Structure and phase composition of cobalt rich coating prepared by laser cladding on low carbon steel

1993 ◽  
Vol 9 (2) ◽  
pp. 172-175 ◽  
Author(s):  
N. Pizúrová ◽  
J. Komurka ◽  
M. Svoboda ◽  
O. Schneeweiss
Keyword(s):  
Phase Composition ◽  
Carbon Steel ◽  
Laser Cladding ◽  
Low Carbon Steel ◽  
Low Carbon

SIZE-INDUCED EFFECTS IN NANOSTRUCTURED NiFe2O4

2010 ◽  
Vol 24 (30) ◽  
pp. 5973-5985
Author(s):  
M. GUNES ◽  
H. GENCER ◽  
T. IZGI ◽  
V. S. KOLAT ◽  
S. ATALAY
Keyword(s):  
Electron Microscopy ◽  
Annealing Temperature ◽  
Structural Parameters ◽  
Hydrothermal Process ◽  
Lattice Parameter ◽  
Effect Of Temperature ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

NiFe 2 O 4 nanoparticles were successfully prepared by a hydrothermal process, and the effect of temperature on them was studied. The particles were annealed at various temperatures ranging from 413 to 1473 K. Studies were carried out using powder X-ray diffraction, scanning electron microscopy, infrared spectroscopy, differential thermal analysis, thermogravimetric analysis and a vibrating sample magnetometer. The annealing temperature had a significant effect on the magnetic and structural parameters, such as the crystallite size, lattice parameter, magnetization and coercivity.

UTILIZATION OF FLY ASH AND CONCRETE RESIDUE IN THE PRODUCTION OF GEOPOLYMER BRICKS

2017 ◽  
Vol 12 (1) ◽  
pp. 63-77 ◽  
Author(s):  
Siriporn Sirikingkaew ◽  
Nuta Supakata
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Compressive Strength ◽  
Phase Composition ◽  
Fly Ash ◽  
Industrial Waste ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

This study presents the development of geopolymer bricks synthetized from industrial waste, including fly ash mixed with concrete residue containing aluminosilicate compound. The above two ingredients are mixed according to five ratios: 100:0, 95:5, 90:10, 85:15, and 80:20. The mixture's physico-mechanical properties, in terms of water absorption and the compressive strength of the geopolymer bricks, are investigated according to the TIS 168-2546 standard. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses are used to investigate the microstructure and the elemental and phase composition of the brick specimens. The results indicate that the combination of fly ash and concrete residue represents a suitable approach to brick production, as required by the TIS 168–2546 standard.

scholarly journals Standard Hot Pressing as a Possible Solution to Obtain Dense K0.5Na0.5NbO3 Ceramic Doped by Er2O3 and Yb2O3

Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4171 ◽  
Author(s):  
Paweł Rutkowski ◽  
Jan Huebner ◽  
Adrian Graboś ◽  
Dariusz Kata ◽  
Dariusz Grzybek ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Rare Earth ◽  
Phase Composition ◽  
Powder Mixture ◽  
Hot Pressing ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ultrasonic Methods ◽  
Scanning Electron

In this study, the influence of the addition of rare earth oxides on the phase composition and density of KNN piezoelectric ceramics was investigated. The initial powders of Na2CO3 and K2CO3 were dried at 150 °C for 2 h. Then, a powder mixture for synthesis was prepared by adding a stoichiometric amount of Nb2O5 and 5 and 10 wt % overabundance of Na2CO3. All powders were mixed by ball-milling for 24 h and synthesized at 950 °C. The phase composition of the reaction bed was checked by means of X-ray diffraction (XRD). It had an appearance of tetragonal and monoclinic K0.5Na0.5NbO3 (KNN) phases. Then, 1 and 2 wt % of Er2O3 and Yb2O3, were added to the mixture. Green samples of 25 mm diameter and 3 mm thickness were prepared and sintered by hot pressing at 1000 °C for 2 h under 25 MPa pressure. The final samples were investigated via scanning electron microscopy (SEM)-energy-dispersive X-ray spectroscopy (EDS), XRD, Rietveld, and ultrasonic methods. Phase analysis showed tetragonal and orthorhombic KNN phases, and a contamination of (K2CO3·1.5H2O) was present. The obtained KNN polycrystals had a relative density above 95%. Texturing of the material was confirmed as a result of hot pressing.

Influence of Iron Bacteria on the Corrosion Behavior of Carbon Steel: SEM Study

2013 ◽  
Vol 65 (1) ◽  
Author(s):  
E. Hamzah ◽  
C. L. Khohr ◽  
Ahmad Abdolahi ◽  
Z. Ibrahim
Keyword(s):  
Carbon Steel ◽  
Cooling Water ◽  
Low Carbon Steel ◽  
Iron Hydroxides ◽  
Low Carbon ◽  
X Ray Diffraction ◽  
X Ray ◽  
Iron Bacteria ◽  
Microbially Influenced Corrosion ◽  
Sem Study

In this work, the iron bacteria were cultured and inoculated into the cooling water before immersion, and low carbon steel coupons were immersed for one month. Then, microbially influenced corrosion (MIC) of carbon steel in the presence of these bacteria was investigated using scanning electron microscopy (SEM), x-ray diffraction spectroscopy (XRD) and weight loss methods. SEM results showed that large amounts of corrosion products and heterogeneous biofilm layer were formed on the coupon surface. SEM also revealed the uniform-pitting corrosion on the steel surface due to bacteria colonization. XRD results show that the main constituents present in corrosion product are composed of iron oxides and iron hydroxides. 

Microstructure and Phase Composition of AlN/Al Composite Fabricated by Directed Melt Nitridation

2008 ◽  
Vol 368-372 ◽  
pp. 977-979
Author(s):  
Sheng Li Jin ◽  
Ya Wei Li ◽  
Jing Liu ◽  
Yuan Bing Li ◽  
Lei Zhao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Phase Composition ◽  
Sandwich Structure ◽  
Ceramic Composite ◽  
Growth Direction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Al Composite ◽  
Scanning Electron

AlN/Al ceramic composite was fabricated by directed melt nitridation of pure Al block covered with 10wt% Mg powder at 1300°C in a high purity flowing N2. Microstructure and phase composition of the composite were investigated by scanning electron microscopy with energy dispersive spectroscopy and X-ray diffraction. Results showed that AlN is the main phase in the composite and its lattice parameters of a and c are 3.1110Å and 4.9806Å, respectively. The phase composition of the composite changes along the growth direction and a gradient sandwich structure forms. The surface of the composite is made up of a dense and thin nodular AlN layer, underneath which an AlN/Al layer appears, followed by an AlN/Al/MgAl2O4 layer. Thermodynamic calculations predicted the formation of possible phases with the addition of Mg. It suggested that the content of Mg at the reaction frontier of nitridation is considerably lower to 0.15wt% where MgAl2O4 was stable, because of escape and reaction exhaustion of Mg. Once Mg is lower than 0.05wt%, only a dense AlN layer can exist, which prevents the further nitridation of Al melt.

Effect of Synthesis Conditions and Actinide Contents on Phase Composition of Actinide Bearing Ceramics

2003 ◽  
Vol 807 ◽  
Author(s):  
A. G. Ptashkin ◽  
S. V. Stefanovsky ◽  
S. V. Yudintsev ◽  
S. A. Perevalov
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Phase Composition ◽  
Fluorite Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Synthesis Conditions ◽  
Reducing Conditions ◽  
Dispersive System ◽  
Scanning Electron

ABSTRACTPu-bearing zirconolite and pyrochlore based ceramics were prepared by melting under oxidizing and reducing conditions at 1550 °C. 239Pu content in the samples ranged between ∼10 and ∼50 wt.%. Phase composition of the ceramics and Pu partitioning were studied using X-ray diffraction (XRD) and scanning electron microscopy with energy dispersive system (SEM/EDS). Major phases in the samples were found to be the target zirconolite and pyrochlore as well as a cubic fluorite structure oxide. Normally the Pu content in the Pu host phases was 10–12 wt.%. This corresponds to the Pu content recommended for matrices for immobilization of excess weapons plutonium. At higher Pu content (up to 50 wt.%) additional phases, such as a PuO2-based cubic fluorite-structured solid solution, perovskite, and rutile were found.

Controlled Synthesize of BaTiO3 Nanoparticles and BaCO3 Nanowires through the Reverse Micelle System

2009 ◽  
Vol 66 ◽  
pp. 171-174
Author(s):  
Zhao Deng ◽  
Ying Dai ◽  
Wen Chen
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Phase Composition ◽  
Reverse Micelle ◽  
X Ray ◽  
Transmission Electron ◽  
Batio3 Nanoparticles ◽  
Scanning Electron ◽  
Micelle System

Single-crystalline BaTiO3 nanoparticles and BaCO3 nanowires were synthesized respectively through the use of a reverse micelle as a medium in the same Oleic acid/n-octane/H2O system, by changing the H2O2 dosage. Both the phase composition and the morphology can be controled. The samples derived were characterized with X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). The formation mechanism has been fully discussed.

Biomorphic SiC Prepared from Carbonized Millet by Sol-Gel and Carbothermal Reduction Processing

2010 ◽  
Vol 152-153 ◽  
pp. 1683-1686
Author(s):  
Qing Wang ◽  
Ya Hui Zhang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Silicon Carbide ◽  
Phase Composition ◽  
Carbothermal Reduction ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Carbon Template ◽  
Scanning Electron

Biomorphic silicon carbide (bioSiC) was prepared by high temperature pyrolysis and sol-gel and carbothermal reduction processing at 1600 oC. The morphology and microstructure of carbon-silica composites and purified bioSiC samples were characterized by scanning electron microscopy. The phase composition of the resulting sample was analyzed by X-ray diffraction. The results suggest that the bioSiC mainly consists of cubic ß-SiC, and principally replicates the shape and microstructure of the carbon template.

Sign in / Sign up

Export Citation Format

Share Document