Unsatisfied processing conditions in making ifosfamide nanostructured lipid carriers: Effects of various formulation parameters on particle size, entrapment efficiency, and drug loading capacity

2014 ◽  
Vol 5 (1) ◽  
pp. 8 ◽  
Author(s):  
Subramanian Selvamuthukumar ◽  
Ramaiyan Velmurugan
Keyword(s):  
Particle Size ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Nanostructured Lipid Carriers ◽  
Loading Capacity ◽  
Processing Conditions ◽  
Formulation Parameters

scholarly journals Evaluation and Comparison of Solid Lipid Nanoparticles (SLNs) and Nanostructured Lipid Carriers (NLCs) as Vectors to Develop Hydrochlorothiazide Effective and Safe Pediatric Oral Liquid Formulations

Pharmaceutics ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 437
Author(s):  
Paola Mura ◽  
Francesca Maestrelli ◽  
Mario D’Ambrosio ◽  
Cristina Luceri ◽  
Marzia Cirri
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Physical Stability ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Nanostructured Lipid Carriers ◽  
Particle Size Reduction ◽  
Solid Lipid ◽  
Oral Liquid

The aim of this study was the optimization of solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) in terms of physicochemical and biopharmaceutical properties, to develop effective and stable aqueous liquid formulations of hydrochlorothiazide, suitable for paediatric therapy, overcoming its low-solubility and poor-stability problems. Based on solubility studies, Precirol® ATO5 and Transcutol® HP were used as solid and liquid lipids, respectively. The effect of different surfactants, also in different combinations and at different amounts, on particle size, homogeneity and surface-charge of nanoparticles was carefully investigated. The best formulations were selected for drug loading, and evaluated also for entrapment efficiency and release behaviour. For both SLN and NLC series, the use of Gelucire® 44/14 as surfactant rather than PluronicF68 or Tween® 80 yielded a marked particle size reduction (95–75 nm compared to around 600–400 nm), and an improvement in entrapment efficiency and drug release rate. NLC showed a better performance than SLN, reaching about 90% entrapped drug (vs. 80%) and more than 90% drug released after 300 min (vs. about 65%). All selected formulations showed good physical stability during 6-month storage at 4 °C, but a higher loss of encapsulated drug was found for SLNs (15%) than for NLCs (<5%). Moreover, all selected formulations revealed the absence of any cytotoxic effect, as assessed by a cell-viability test on Caco-2 cells and are able to pass the intestinal epithelium as suggested by Caco-2 uptake experiments.

scholarly journals Solid nanostructured lipid carriers loaded with silymarin for oral delivery: Formulation development and evaluation

2021 ◽  
Vol 3 (4) ◽  
pp. 56-67
Author(s):  
Rajashree Hirlekar ◽  
Esha Patil ◽  
Srinivas Bhairy
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Oral Delivery ◽  
Ex Vivo ◽  
Drug Loading ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Nanostructured Lipid Carriers ◽  
Formulation Development ◽  
Ex Vivo Permeation

The present study was aimed at preparing stable dry adsorbed nanoparticles (DANs) of silymarin loaded nanostructured lipid carriers (NLCs). The prepared silymarin loaded NLCs and DANs were characterized for various quality parameters. Silymarin loaded NLCs were prepared by a modified hot melt emulsification ultra-sonication method using glyceryl monostearate (GMS), capmul MCM C8 EP (CAP) and gelucire 50/13 (G50/13) as solid lipid, liquid lipid and surfactant respectively. For better stability, NLC dispersion was converted into DANs by adsorbing them onto some suitable carriers. NLCs and DANs were characterized for particle size, polydispersity index, zeta potential, entrapment efficiency, drug loading, assay, thermal behavior, crystallinity and morphological study. The optimized NLCs have a mean particle size of 206.1±012.5 nm (size distribution of 0.249±0.058), a zeta potential of -32.5±1.2 mV with high entrapment of 95.60±0.45% and drug loading of 1.90±0.08%. The X-ray diffraction and endothermic peaks confirmed the maximum encapsulation of active in lipid matrices. The particles were spherical with smooth surface morphology. In-vitro release studies showed sustained drug release for up to 24 h. Ex-vivo permeation in the presence and absence of lymphatic blocker indicates the uptake of silymarin loaded NLCs by the lymphatic route. Silymarin loaded NLCs prepared had a nanosize distribution with high entrapment efficiency. The ex-vivo permeation study for optimized NLC formulation exhibited the lymphatic uptake of active. Dispersion stability was increased by preparing the DANs. The solid dry powder is used for oral reconstitution and can be further converted into tablets or filled into capsules.

Preparation of Zingiber officinale Extract Loaded Solid Lipid Nanoparticles

2012 ◽  
Vol 506 ◽  
pp. 389-392 ◽  
Author(s):  
N. Ratcharin ◽  
P. Wongtrakul ◽  
Ratana Indranupakorn
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Loading Capacity ◽  
Ginger Extract ◽  
Mean Particle Size ◽  
Solid Lipid ◽  
The Mean

Solid lipid nanoparticles (SLNs) loaded ginger extract were prepared by microemulsion technique. The nanoparticles were composed of stearic acid as solid lipids, Cremophor RH 40 as surfactant and ethanol as co-surfactant. It was found that variation in the amount of surfactant and co-surfactant had profound effects on the mean particle size, the drug entrapment efficiency and loading capacity. Transmission electron microscope (TEM) revealed the spherical nature of the particles. The mean particle size of SLNs ranging between 453.1 and 551.7 nm were measured by dynamic light scattering (DLS). The entrapment efficiency (EE) and drug loading capacity (LC) determined by high performance liquid chromatography (HPLC) found to be in the range of 85.2390.07% and 1.411.49%, respectively.

Solid Lipid Nanoparticles for Topical Delivery of Acitretin for the Treatment of Psoriasis by Design of Experiment

2020 ◽  
Vol 12 (2) ◽  
pp. 4474-4491
Author(s):  
Rajkumar Aland ◽  
Ganesan M ◽  
P. Rajeswara Rao ◽  
Bhikshapathi D. V. R. N.
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Tem Analysis ◽  
In Vitro Drug Release ◽  
Solid Lipid

The main objective for this investigation is to develop and optimize the solid lipid nanoparticles formulation of acitretin for the effective drug delivery. Acitretin loaded SLNs were prepared by hot homogenization followed by the ultrasonication using Taguchi’s orthogonal array with eight parameters that could affect the particle size and entrapment efficiency. Based on the results from the analyses of the responses obtained from Taguchi design, three different independent variables including surfactant concentration (%), lipid to drug ratio (w/w) and sonication time (s) were selected for further investigation using central composite design. The  lipid Dynasan-116, surfactant poloxomer-188 and co surfactant egg lecithin resulted in better percent drug loading and evaluated for particle size, zeta potential, drug entrapment efficiency, in vitro drug release and stability. All parameters were found to be in an acceptable range. TEM analysis has demonstrated the presence of individual nanoparticles in spherical shape and the results were compatible with particle size measurements.  In vitro drug release of optimized SLN formulation (F2) was found to be 95.63 ± 1.52%, whereas pure drug release was 30.12 after 60 min and the major mechanism of drug release follows first order kinetics release data for optimized formulation (F2) with non-Fickian (anomalous) with a strong correlation coefficient (R2 = 0.94572) of Korsemeyer-Peppas model. The total drug content of acitretin gel formulation was found to 99.86 ± 0.012% and the diameter of gel formulation was 6.9 ± 0.021 cm and that of marketed gel was found to be 5.7 ± 0.06 cm, indicating better spreadability of SLN based gel formulation. The viscosity of gel formulation at 5 rpm was found to be 6.1 x 103 ± 0.4 x 103 cp. The release rate (flux) of acitretin across the membrane and excised skin differs significantly, which indicates about the barrier properties of skin. The flux value for SLN based gel formulation (182.754 ± 3.126 μg cm−2 h−1) was found to be higher than that for marketed gel (122.345 ± 4.786 μg cm−2 h−1). The higher flux and Kp values of SLN based gel suggest that it might be able to enter the skin easily as compared with marketed gel with an advantage of low interfacial tension of the emulsifier film that ensures an excellent contact to the skin. This topically oriented SLN based gel formulation could be useful in providing site-specific dermal treatment of psoriasis

SCREENING OF BIODEGRADABLE POLYMER AND MOST EFFECTIVE VARIABLES IN PREPARATION OF ESSENTIAL OIL LOADED NANO PARTICLES FOR PULMONARY DELIVERY USING TAGUCHI DESIGN

INDIAN DRUGS ◽  
2021 ◽  
Vol 58 (02) ◽  
pp. 68-75
Author(s):  
Avani Khristi ◽  
Lalit L. Jha ◽  
Abhay Dharamsi ◽  
Keyword(s):  
Particle Size ◽  
Essential Oil ◽  
Biodegradable Polymers ◽  
Drug Loading ◽  
Pulmonary Inflammation ◽  
Pulmonary Delivery ◽  
Entrapment Efficiency ◽  
Nano Particles ◽  
Favorable Conditions ◽  
Insoluble Polymers

The biodegradability of inhalable nanoparticles (NPs) is an important criterion in prevention of lung toxicity due to NPs which have been taken to cure the condition. Pulmonary inflammation may result due to non-biodegradation or insoluble polymers used to produce NPs. Biodegradable polymers are widely used for manufacturing safe drug-entrapped inhalable NPs for pulmonary delivery. Here in this study, for preparing ajwain essential oil loaded NPs for pulmonary delivery, biodegradable polymers chitosan, gelatin and alginic acid have been evaluated for suitability. Based on the results of trial batches prepared from each polymer, the responses particle size and entrapment efficiency were measured and compared. Out of the three polymers, chitosan was having very good entrapment efficiency, poly dispersive index, drug loading and zeta potential-favorable conditions for pulmonary delivery of essential oils. Further screening of most effective variables in manufacturing nano particles using chitosan, eight batches of nano particles have been prepared as per taguchi orthogonal 2 level array L8 experimental design (Design expert software, version 7.0) where two responses, particle size and entrapment efficiency, have been observed. Based on the results of eight batches, standard effects have been calculated and significant variables identified, for both particle size and entrapment efficiency, for further optimization under design of experiment.

scholarly journals Development of Solid Lipid Nanoparticles and Nanostructured Lipid Carriers of Loteprednol Etabonate: Physicochemical Characterization and Ex Vivo Permeation Studies

2021 ◽  
Author(s):  
Burcu Üner ◽  
Samet Özdemir ◽  
Çetin Taş ◽  
Yıldız Özsoy ◽  
Melike Üner
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Physicochemical Characterization ◽  
Lipid Nanoparticles ◽  
Nanostructured Lipid Carriers ◽  
Fickian Diffusion ◽  
Control Group ◽  
Loteprednol Etabonate ◽  
Solid Lipid

Abstract Purpose Loteprednol etabonate (LE) is a new generation corticosteroid that is used for the treatment of inflammatory and allergic conditions of the eye, and management of seasonal allergic rhinitis nasally. LE which is a poorly soluble drug with insufficient bioavailability, has a high binding affinity to steroid receptors. Sophisticated colloidal drug delivery systems of LE could present an alternative for treatment of inflammatory and allergic conditions of the skin. For this purpose, solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) were attempted to improve for transdermal LE delivery for the first time. Methods SLN and NLC were produced by hot homogenization and ultrasonication technique. Formulations were characterized by dynamic light scattering, scanning electron microscopy, fourier transform infrared spectroscopy and differential scanning calorimetry. Their physical stability was monitored for 3 months of storage. Drug release profiles and permeation properties of SLN and NLC through the porcine skin were investigated. Results It was determined that SLN and NLC below 150 nm particle size had a homogeneous particle size distribution as well as high drug loading capacities. They were found to be stable both physically and chemically at room temperature for 90 days. In terms of release kinetics, it was determined that they released from SLN and NLC in accordance with Fickian diffusion release. Formulations prepared in this study were seen to significantly increase drug penetration through pig skin compared to the control group (p ≤ 0.05). Conclusion SLN and NLC formulations of LE can be stated among the systems that can be an alternative to conventional systems with less side-effect profile in the treatment of inflammatory problems on the skin.

scholarly journals FORMULATION, OPTIMIZATION AND IN VITRO EVALUATION OF 5-FLUOROURACIL LOADED LIQUORICE CRUDE PROTEIN NANOPARTICLES FOR SUSTAINED DRUG DELIVERY USING BOX-BEHNKEN DESIGN

2021 ◽  
pp. 216-226
Author(s):  
GEETHA V. S. ◽  
MALARKODI VELRAJ
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Crude Protein ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Box Behnken Design ◽  
Sustained Drug Delivery ◽  
Drug Loading Efficiency

Objective: To formulate, optimize and evaluate 5-fluorouracil loaded liquorice crude protein nanoparticles for sustained drug delivery using Box-Behnken design. Methods: 5-fluorouracil (5-FU) loaded liquorice crude protein (LCP) nanoparticles were prepared by desolvation method using ethanol-water (1:2 ratio), Tween-80 (2%v/v) as stabilizing agent and gluteraldehyde (8% v/v) as cross linking agent. The optimization of prepared nanoparticles was carried out using Box-Behnken design with 3 factors 2 levels and 3 responses. The independent variables were A)5-FU concentration B)LCP concentration and C) sonication time while the responses were R1) Drug entrapment efficiency R2) Drug loading efficiency and R3) Particle size. The correlation between factors and responses were studied through response surface plots and mathematical equations. The nanoparticles were evaluated for FTIR, physicochemical properties like particle size and zeta potential by Photon correlation spectroscopy (PCS) and surface morphology by TEM. The entrapment efficiency, drug loading efficiency and in vitro drug release studies in PBS pH 7.4 (24 h) were carried out. The observed values were found to be in close agreement with the predicted value obtained from the optimization process. Results: 5-fluorouracil loaded LCP nanoparticles were prepared by desolvation method, the optimization was carried out by Box-Behnken design and the final formulation was evaluated for particle size (301.1 nm), zeta-potential (-25.8mV), PDI(0.226), with entrapment efficiency (64.07%), drug loading efficiency (28.54%), in vitro drug release (65.2% in 24 h) respectively. The formulated nanoparticles show Higuchi model drug release kinetics with sustained drug delivery for 24 h in pH7.4 buffer. Conclusion: The results were proved to be the most valuable for the sustained delivery of 5-Fluorouracil using liquorice crude protein as carrier. 5-FU–LCP nanoparticles were prepared using Tween-80 as stabilizing agent and gluteraldehyde as cross-linking agent to possess ideal sustained drug release characteristics.

scholarly journals Ex-vivo Ex-Vivo Absorption Study of a Novel Dabigatran Etexilate Loaded Nanostructured Lipid Carrier Using Non-Everted Intestinal Sac Model

2019 ◽  
Vol 28 (2) ◽  
pp. 37-45
Author(s):  
Haithem N Abed ◽  
Ahmed A. Hussein
Keyword(s):  
Particle Size ◽  
Oleic Acid ◽  
Zeta Potential ◽  
Oral Absorption ◽  
Ex Vivo ◽  
Dabigatran Etexilate ◽  
Entrapment Efficiency ◽  
Nanostructured Lipid Carrier ◽  
Loading Capacity ◽  
Intestinal Permeation

Abstract The purpose of our study was to develop Dabigatran Etexilate loaded nanostructured lipid carriers (DE-NLCs) using Glyceryl monostearate and Oleic acid as lipid matrix, and to estimate the potential of the developed delivery system to improve oral absorption of low bioavailability drug, different Oleic acid ratios effect on particle size, zeta potential, entrapment efficiency and loading capacity were studied, the optimized DE-NLCs shows a particle size within the nanorange, the zeta potential (ZP) was 33.81±0.73mV with drug entrapment efficiency (EE%) of  92.42±2.31% and a loading capacity (DL%) of 7.69±0.17%. about 92% of drug was released in 24hr in a controlled manner, the ex-vivo intestinal permeation study using the non-everted sac model shows four folds increment in the permeation of DE-NLCs compared to dabigatran etexilate suspension (DE-S).

scholarly journals FORMULATION AND EVALUATION OF METFORMIN HYDROCHLORIDE LOADED FLOATING MICROSPHERES

2019 ◽  
pp. 74-82
Author(s):  
SHIKHA KESHARVANI ◽  
PANKAJ KUMAR JAISWAL ◽  
ALOK MUKERJEE ◽  
AMIT KUMAR SINGH
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Surface Morphology ◽  
Release Kinetics ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Metformin Hydrochloride ◽  
Compatibility Study ◽  
Specific Drug ◽  
Site Specific

Objective: The main objective of this study was to develop and evaluate the eudragit and HPMC coated metformin hydrochloride floating microspheres, in which HPMC helps in floating and eudragit as a coating material for a site-specific drug release in a controlled manner and the active moiety metformin used as anti-hyperglycemic agent. Methods: The floating microsphere was prepared by the solvent evaporation method incorporating metformin as a model drug. The prepared floating microsphere were characterized for particle size, %yield, drug loading and entrapment efficiency, compatibility study, %buoyancy, surface morphology and In vitro drug release and release kinetics. Results: The result metformin loaded floating microsphere was successfully prepared and the particle size range from 397±23.22 to 595±15.82 µm, the entrapment efficiency range from 83.49±1.33 to 60.02±1.65% and drug loading capacity range from 14.3±0.54 to 13.31±0.47% and %buoyancy range from 85.67±0.58 to 80.67±1.15%. The FT-IR and X-RD analysis confirmed that no any interaction between drug and excipient, and surface morphology confirmed those particles are sphere. The floating microsphere show maximum 96% drug release in pH 0.1N HCL and follow the Korsmeyer peppas model of the super case-2 transport mechanism. Conclusion: These results suggest that metformin loaded floating microspheres could be retain in stomach for long time and give site specific drug release in controlled manner.

scholarly journals BIODEGRADABLE POLYMER: A NOVEL PHARMACEUTICAL CARRIER FOR SUSTAINED RELEASE OF METRONIDAZOLE

2017 ◽  
Vol 10 (10) ◽  
pp. 136
Author(s):  
Gayathri Hariharan ◽  
Priyanka Sinha
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Sustained Release ◽  
Biodegradable Polymer ◽  
Drug Loading ◽  
Cross Linking ◽  
Loading Capacity ◽  
Flow Properties ◽  
Chitosan Microspheres

Objective: To optimize and evaluate the formulation of metronidazole (MT)-loaded chitosan microspheres and to investigate the efficiency of biodegradable polymer in developing sustained release formulation of MT to prolong the action of drug.Methods: MT microspheres were prepared using emulsion cross-linking method. Polymer-drug compatibility study was done using Fourier transform infrared. Physical characteristics were evaluated by particle size,SEM, flow properties etc. In vitro studies for evaluating drug release for MT-loaded chitosan microspheres were done by dissolution study.Results: Particle size of the formulated microspheres was found to be within the range of 110-130 μm. Flow properties of F1-F7 such as angle of repose, bulk density, and tapped density were found to be within limits. Drug entrapment efficiency was found to be better for all the formulations within the range of 74.82-84.32% w/w. Drug loading capacity was found to be in the range of 56-83.2% w/v. In vitro drug release was found to be in the range of 81.32-96.23% w/v.Conclusion: In spite of all the above results, we conclude that F5 formulation was optimized depending on the data obtained from the drug loading capacity and percentage drug release studies. F5 formulation is formulated with drug-polymer ratio 1:2 with 1% of di octyl sodium sulfo succinate and 8 ml of glutaraldehyde as a cross-linking agent.

Sign in / Sign up

Export Citation Format

Share Document