scholarly journals Influence of Aluminum Surface Morphology on Electroluminescent Intensity.

2000 ◽  
Vol 51 (7) ◽  
pp. 714-717 ◽  
Author(s):  
Tomokazu MAENO ◽  
Go TANIGAWA ◽  
Shigeyoshi MORISAKI
Keyword(s):  
Surface Morphology ◽  
Aluminum Surface

scholarly journals The effect of changing the electrolyte species volume ratio on the electropolishing of aluminum foil

Quimica Hoy ◽  
2012 ◽  
Vol 2 (4) ◽  
pp. 4
Author(s):  
Dena Pourjafari ◽  
Dora Irma Martínez ◽  
Alejandro Vázquez ◽  
Idalia Gómez
Keyword(s):  
Surface Morphology ◽  
Current Density ◽  
Perchloric Acid ◽  
Electrochemical Behavior ◽  
Volume Ratio ◽  
Aluminum Foil ◽  
Aluminum Surface ◽  
Anodization Process ◽  
Pre Treatment

In this paper, the electrochemical behavior and surface morphology of AA1100 were investigated in commercial electropolishing electrolyte consisting of perchloric acid (HCIO4) and ethanol (C2H5OH). Electropolishing of aluminum foil is a pre-treatment on aluminum surface before anodization process. The electropolishing on Al was carried out in different electrolyte concentrations and proper concentrations were reported by using current density-voltage curves, impedance spectroscopies and AFM images.

The effects of chromate deoxidizer treatment parameter variation on surface morphology and adhesive bonding of 2219-T87 aluminum

1988 ◽  
Vol 46 ◽  
pp. 548-549
Author(s):  
L. J. Rowland ◽  
D. F. Allgeyer ◽  
R. J. Brown
Keyword(s):  
Surface Morphology ◽  
Adhesive Bonding ◽  
Thermal Protection ◽  
Aluminum Surface ◽  
Epoxy Primer ◽  
Demineralized Water ◽  
Treatment Parameter ◽  
Minute Post ◽  
Bond Strengths ◽  
Aluminum Panels

The shell of the Space Shuttle's External Tank is 2219-T87 aluminum to which an epoxy primer is applied to allow bonding of the Thermal Protection System (TPS). A chromate deoxidizer is used to prepare the aluminum surface for primer bonding. In this study, scanning electron microscopy (SEM) was used to characterize the surface morphology of 2219-T87 aluminum associated with different bond strengths produced by varying the deoxidizer treatment parameters.Eight sets of two 2219-T87 aluminum panels were treated with chromate deoxidizer. One set was used as a control. The second set was subjected to an additional deoxidizer treatment, while the third set received two additional deoxidizer treatments. The fourth, fifth, and sixth sets were held for 5, 10, and 15 minute post deoxidiation and prior to final rinse with demineralized water. The two remaining sets were deliberately contaminated with 25:1 and 100:1 water:deoxidizer solutions, which were allowed to dry on their surfaces.

Improved Corrosion Resistance of Aluminum in 0.5 M HCl Solution using Plasma Electrolytic Oxidation

2019 ◽  
Vol 233 (5) ◽  
pp. 609-625 ◽  
Author(s):  
M. A. Deyab ◽  
S. S. Abd El-Rehim ◽  
A. Abd El Moneim ◽  
H. H. Hassan
Keyword(s):  
Corrosion Resistance ◽  
Surface Morphology ◽  
Oxide Layer ◽  
Plasma Electrolytic Oxidation ◽  
Aluminum Surface ◽  
Protective Oxide ◽  
High Efficient ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic ◽  
Hcl Solution

Abstract In this paper, the plasma electrolytic oxidation (PEO) was used to improve the corrosion resistance of aluminum in 0.5 M HCl solution. Influence of many factors such as the composition of electrolytes, time and inorganic additives on the performance of PEO process have been investigated. The surface morphology of PEO films was inspected using SEM, EDX and XRD analysis. The electrochemical impedance spectroscopy (EIS) and polarization measurements were carried out to evaluate the corrosion resistance of aluminum. The hardness and reduced modulus of aluminum surface at different PEO process time were determined by nanoindenter measurements. The results showed that the best conditions for formation high efficient oxide layer on the aluminum surface during PEO process were carried out in 0.001 M NaOH electrolyte containing 9 × 10−5 M Na2WO4 for 5 min. The PEO process is able to inhibit uniform and pitting corrosion of aluminum in HCl solution. The surface morphology analysis showed that PEO process produce a highly resistant protective oxide layer, mainly composed of orthorhombic crystalline phase of α-Al2O3. This oxide characterized by its greater hardness.

An Established Epithelial Cell Line (NPC/HK1) from a Nasopharyngeal Carcinoma - II. A Sem Study

1982 ◽  
Vol 40 ◽  
pp. 224-225
Author(s):  
Li C.L. ◽  
Chew E.C. ◽  
Huang D.P. ◽  
Ho H.C. ◽  
Mak L.S. ◽  
...  
Keyword(s):  
Nasopharyngeal Carcinoma ◽  
Epithelial Cell ◽  
Surface Morphology ◽  
Cell Line ◽  
Epithelial Cell Line ◽  
Present Communication ◽  
Cells In Culture ◽  
Sem Study ◽  
Well Differentiated

An epithelial cell line, NPC/HK1, has recently been successfully established from a nasopharyngeal carcinoma of the moderately to well differentiated squamous type. The present communication reports on the surface morphology of the NPC/HK1 cells in culture.

Specimen Collection Effect in Scanning Electron Microscopy Images

1972 ◽  
Vol 30 ◽  
pp. 448-449
Author(s):  
J. Temple Black ◽  
Jose Guerrero
Keyword(s):  
Surface Morphology ◽  
Secondary Electron Emission ◽  
Secondary Electrons ◽  
Charge Effects ◽  
Material Density ◽  
Specimen Collection ◽  
The Subject ◽  
Curved Paths ◽  
Subject Material ◽  
Microscopy Images

In the SEM, contrast in the image is the result of variations in the volume secondary electron emission and backscatter emission which reaches the detector and serves to intensity modulate the signal for the CRT's. This emission is a function of the accelerating potential, material density, chemistry, crystallography, local charge effects, surface morphology and especially the angle of the incident electron beam with the particular surface site. Aside from the influence of object inclination, the surface morphology is the most important feature In producing contrast. “Specimen collection“ is the name given the shielding of the collector by adjacent parts of the specimen, producing much image contrast. This type of contrast can occur for both secondary and backscatter electrons even though the secondary electrons take curved paths to the detector-collector.Figure 1 demonstrates, in a unique and striking fashion, the specimen collection effect. The subject material here is Armco Iron, 99.85% purity, which was spark machined.

The Effect of Benzene on Bluegill Olfactory Lamellae

1985 ◽  
Vol 43 ◽  
pp. 574-575
Author(s):  
D.R. Mattie ◽  
J.W. Fisher
Keyword(s):  
Surface Morphology ◽  
Soluble Fraction ◽  
Lepomis Macrochirus ◽  
Sublethal Concentration ◽  
Water Soluble ◽  
Major Constituent ◽  
Jet Fuels ◽  
Aquatic Biota ◽  
Normal Surface ◽  
Cacodylate Buffer

Jet fuels such as JP-4 can be introduced into the environment and come in contact with aquatic biota in several ways. Studies in this laboratory have demonstrated JP-4 toxicity to fish. Benzene is the major constituent of the water soluble fraction of JP-4. The normal surface morphology of bluegill olfactory lamellae was examined in conjunction with electrophysiology experiments. There was no information regarding the ultrastructural and physiological responses of the olfactory epithelium of bluegills to acute benzene exposure.The purpose of this investigation was to determine the effects of benzene on the surface morphology of the nasal rosettes of the bluegill sunfish (Lepomis macrochirus). Bluegills were exposed to a sublethal concentration of 7.7±0.2ppm (+S.E.M.) benzene for five, ten or fourteen days. Nasal rosettes were fixed in 2.5% glutaraldehyde and 2.0% paraformaldehyde in 0.1M cacodylate buffer (pH 7.4) containing 1.25mM calcium chloride. Specimens were processed for scanning electron microscopy.

Observation of surface morphology by reflection electron holography

1989 ◽  
Vol 47 ◽  
pp. 536-537
Author(s):  
N. Osakabe ◽  
J. Endo ◽  
T. Matsuda ◽  
A. Tonomura
Keyword(s):  
Phase Shift ◽  
Surface Morphology ◽  
High Sensitivity ◽  
High Energy ◽  
Path Difference ◽  
Transmission Mode ◽  
Electron Holography ◽  
Dynamical Process ◽  
High Vertical Resolution ◽  
Amplification Technique

Progress in microscopy such as STM and TEM-TED has revealed surface structures in atomic dimension. REM has been used for the observation of surface dynamical process and surface morphology. Recently developed reflection electron holography, which employes REM optics to measure the phase shift of reflected electron, has been proved to be effective for the observation of surface morphology in high vertical resolution ≃ 0.01 Å.The key to the high sensitivity of the method is best shown by comparing the phase shift generation by surface topography with that in transmission mode. Difference in refractive index between vacuum and material Vo/2E≃10-4 owes the phase shift in transmission mode as shownn Fig. 1( a). While geometrical path difference is created in reflection mode( Fig. 1(b) ), which is measured interferometrically using high energy electron beam of wavelength ≃0.01 Å. Together with the phase amplification technique , the vertivcal resolution is expected to be ≤0.01 Å in an ideal case.

Defect morphology in thick relaxed layers of InGaAs on GaAs

1990 ◽  
Vol 48 (4) ◽  
pp. 668-669
Author(s):  
R H Dixon ◽  
P Kidd ◽  
P J Goodhew
Keyword(s):  
Electron Microscopy ◽  
Surface Morphology ◽  
Growth Conditions ◽  
X Ray Diffraction ◽  
Double Crystal ◽  
Strained Layers ◽  
Good Surface ◽  
Transmission Electron ◽  
Device Structures ◽  
Surface Morphologies

Thick relaxed InGaAs layers grown epitaxially on GaAs are potentially useful substrates for growing high indium percentage strained layers. It is important that these relaxed layers are defect free and have a good surface morphology for the subsequent growth of device structures.3μm relaxed layers of InxGa1-xAs were grown on semi - insulating GaAs substrates by Molecular Beam Epitaxy (MBE), where the indium composition ranged from x=0.1 to 1.0. The interface, bulk and surface of the layers have been examined in planar view and cross-section by Transmission Electron Microscopy (TEM). The surface morphologies have been characterised by Scanning Electron Microscopy (SEM), and the bulk lattice perfection of the layers assessed using Double Crystal X-ray Diffraction (DCXRD).The surface morphology has been found to correlate with the growth conditions, with the type of defects grown-in to the layer (e.g. stacking faults, microtwins), and with the nature and density of dislocations in the interface.

Effect of Electrolyte Compositions on the Physical Property and Surface Morphology of Copper Foil

2010 ◽  
Vol 48 (10) ◽  
pp. 951-956 ◽  
Author(s):  
Tae-Gyu Woo ◽  
Il-Song Park ◽  
Woo-Yong Jeon ◽  
Eun-Kwang Park ◽  
Kwang-Hee Jung ◽  
...  
Keyword(s):  
Surface Morphology ◽  
Copper Foil ◽  
Physical Property
Sign in / Sign up

Export Citation Format

Share Document