Optimum planting density and harvest stage for little-leaf and normal-leaf cucumbers for once-over harvest

1998 ◽  
Vol 78 (2) ◽  
pp. 333-340 ◽  
Author(s):  
Jonathan R. Schultheis ◽  
Todd C. Wehner ◽  
S. Alan Walters
Keyword(s):  
Seed Size ◽  
Fruit Quality ◽  
Skin Color ◽  
Plant Density ◽  
Planting Density ◽  
Cucumber Plant ◽  
Vegetable Production ◽  
Normal Leaf ◽  
Plant Densities ◽  
Growing Conditions

Optimum planting density and harvest stage were determined for once-over harvest of little-leaf and normal-leaf cucumbers. Three harvest stages (10, 25, and 50% oversize fruit) and four plant densities (37,000, 75,000, 150,000, and 300,000 plants/ha) were evaluated on little-leaf cucumber (H-19) and normal-leaf cucumber (Sumter and Regal). Plant density did not affect skin color, seedcell size, and seed size in the cultivars evaluated. However, lighter skin color, larger seedcell, and larger seed size were detected at the later harvest stages in H-19. Harvest stage did not influence fruit skin color in Regal and Sumter, but seedcell size and seed size increased quadratically with harvest stage. H-19 produced the highest yield (tonne/ha) and dollar value ($/ha) followed by Regal and Sumter. Considering fruit quality and dollar value, the 10% harvest stage at 330 000 plants ha−1 was the optimum stage and density for once-over harvest of H-19 under North Carolina growing conditions. Higher yield occurred at the later harvest stages, but poorer fruit quality (increased seed and seedcell size, and a lighter skin color) was associated with those stages. Fruit quality and dollar value of Regal was best at the 10% harvest stage at approximately 240 000 plants ha−1, while 200 000 plants ha−1 was best for Sumter. Key words: Cucumis sativus, cucumber, plant type, spacing, crop ideotype, vegetable production

scholarly journals Responses of “Little Leaf” vs. Normal Cucumber to Planting Density and Chlorflurenol

HortScience ◽  
1998 ◽  
Vol 33 (5) ◽  
pp. 816-818 ◽  
Author(s):  
Haim Nerson
Keyword(s):  
Field Experiments ◽  
Plant Density ◽  
Growth Habit ◽  
Leaf Growth ◽  
Planting Density ◽  
Normal Leaf ◽  
Pickling Cucumber ◽  
Plant Growth Habit ◽  
Plant Densities ◽  
Commercial Yield

Two field experiments were conducted in Bet Hashita (1992) and Newe Ya'ar (1993), Israel, in order to examine the possibility of using plant growth habit, chlorflurenol, and plant population density to concentrate yield of pickling cucumber (Cucumis sativus L.) under a simulated once-over mechanical harvest system. Two near-isogenic cucumber lines, WI 1983G normal and WI 1983G little leaf, were grown under three plant densities, 5, 10, and 20 plants/m2, and at flowering half of the plants were treated with 50 mg·L-1 chlorflurenol solution. The little leaf line produced a smaller canopy than the normal line under five plants/m2 but a larger canopy under 20 plants/m2. The average commercial yield of the little leaf line was higher than that of the normal leaf line by 28% and 55% in Bet Hashita and in Newe Ya'ar, respectively. The highest yield of each line was achieved under the highest plant density. The average commercial yields under 20 plants/m2 were 1.13 and 0.91 kg·m-2 in Bet Hashita and 1.86 and 0.92 kg·m-2 in Newe Ya'ar for little leaf and normal leaf, respectively. Chlorflurenol increased fruit number per unit area but did not increase yield. Nevertheless, it increased the proportion of small fruits, which are more valuable. The present study shows that the little leaf growth habit can increase the yield concentration in pickling cucumber and make this crop more suitable for a once-over mechanical harvest. Chemical name used: methyl-2-chloro-9-hydroxyfluorene-9-carboxylate (chlorflurenol).

scholarly journals Response of biomass, grain production, and sugar content of four sorghum plant varieties (Sorghum bicolor (L.) Moench) to different plant densities

2021 ◽  
Vol 6 (1) ◽  
pp. 761-770
Author(s):  
Reni Lestari ◽  
Kartika Ning Tyas ◽  
Arief N. Rachmadiyanto ◽  
Mahat Magandhi ◽  
Enggal Primananda ◽  
...  
Keyword(s):  
Sorghum Bicolor ◽  
Plant Density ◽  
Sugar Content ◽  
Plant Production ◽  
Planting Density ◽  
Grain Production ◽  
Marginal Areas ◽  
Sorghum Plant ◽  
Plant Densities ◽  
Biomass Plant

Abstract Sorghum (Sorghum bicolor (L.) Moench) is a potential plant for food, livestock feed, biofuel, sugar, alcohol, and other bioindustry products. Sorghum could be adaptable to grow and expand in marginal areas of the world. Varieties of sorghum have their specific morpho-agronomic characters. It would be significant to compare the performance of multiple sorghum varieties to identify a suitable one for the intended use. The increase in biomass plant production could be caused by cultivation factors, such as an increased planting density. This study aims to determine the response of four different sorghum varieties to the treatment of the plant density on the biomass, grain production, and sugar content of stem juice. This research was conducted using two factors: sorghum variety (“Super 1,” “Keler,” “Lepeng,” and “Rio”) and the plant density (two, four, and six plants per hole or 106,667; 213,333; and 320,000 plants ha−1, respectively). The results of the study showed that all four sorghum varieties tested could be used as biomass resources. The highest plant dry biomass was gained from six plants per hole with 44.0 t ha–1, whereas the lowest one was two plants per hole with 30.4 t ha–1. “Super 1” was a superior variety due to the significant highest sugar content of the stem juice (13.9°Brix) and grain production. “Lepeng” variety was the lowest in both sugar content (8°Brix) and grain production, whereas “Keler” and “Rio” varieties contained sugar in between 8.5 and 10.8°Brix of the stem juice.

scholarly journals Effect of Planting Density on the Yield and Growth of Intercropped Tomatoes and Peppers in Florida

HortScience ◽  
2021 ◽  
Vol 56 (2) ◽  
pp. 286-290
Author(s):  
Ravneet K. Sandhu ◽  
Nathan S. Boyd ◽  
Lincoln Zotarelli ◽  
Shinsuke Agehara ◽  
Natalia Peres
Keyword(s):  
Plant Density ◽  
Gulf Coast ◽  
Bell Pepper ◽  
Production Costs ◽  
Planting Density ◽  
Shoot Biomass ◽  
High Plant Density ◽  
Plant Densities ◽  
High Production ◽  
Research And Education

Florida vegetable growers are facing high production costs due to high input costs, lower profitability, and competition from foreign markets. Multi/intercropping allows growers to increase the yields and profits per unit area by producing multiple crops on the same beds. Experiments determining the effects of intercropping and plant spacing was conducted in Fall 2018 and 2019 at Gulf Coast Research and Education Center, Balm. Tomato and bell pepper were intercropped at low and high planting density on plastic-covered beds. Bell pepper shoot biomass was significantly (P < 0.001) reduced when intercropped with tomato, compared with monocropped bell pepper. However, tomato shoot biomass was significantly reduced when tomato plant density increased, but it was unaffected by bell pepper intercropping. Biomass of both crops was unaffected by relay cropping. Bell pepper yields when intercropped with tomato at low density (60 cm tomato-tomato and 38 cm pepper-pepper) had similar yields to bell pepper planted alone in low and high planting density. We concluded that bell pepper plants were more sensitive to interspecific competition, whereas tomato plants were more sensitive to intraspecific competition. Intercropping may be a viable option for growers at recommended plant densities used for monocrops. However, high plant density is not recommended.

scholarly journals Plant density and peanut crop yield (Arachis hypogaea) in the peanut growing region of Córdoba (Argentina)

2018 ◽  
Vol 45 (2) ◽  
pp. 82-86 ◽  
Author(s):  
F.D. Morla ◽  
O. Giayetto ◽  
E. M. Fernandez ◽  
G. A. Cerioni ◽  
C. Cerliani
Keyword(s):  
Field Experiments ◽  
Plant Density ◽  
Yield Response ◽  
Factors Affecting ◽  
Growing Seasons ◽  
Peanut Crop ◽  
Wide Range ◽  
Plant Densities ◽  
Growing Conditions ◽  
Growing Region

ABSTRACT Plant density is one of the most important management factors affecting the peanut growth, modifying the capacity to capture radiation, water and nutrients. Peanut yield response to increased plant density changes according to environmental conditions, the genotype used, and planting date. Therefore, the optimum plant density (OPD) may vary with location. The aim of this project was (i) to fit the Mitscherlich's equation of diminishing productivities to the yield response of runner-type peanuts to increasing plant density under different growing conditions in the peanut growing region of Cordoba Argentina; and (ii) validate this model with independent experimental data. The first stage was based on the analysis of data from different projects of plant densities carried out in the peanut growing area of Córdoba. This information was adjusted to the decreasing yield equation and the OPD was calculated. For validation, a field experiment was conducted during the 2013/14 and 2014/15 growing seasons under irrigated and rain-fed conditions where pod yield was evaluated for 5, 12, 18, 25 and 36 plants/m2. No interaction was detected between soil moisture conditions and plant density. Yield response to plant density had a high degree of fitness for a wide range of environmental and crop conditions. In field experiments, the peanut yield decreased only at the lowest plant density (5 plants/m2). Yield response to density adjusted to the Mitscherlich equation indicated that OPD ranged from 10.5 to 24.8 plants/m2. Using a single adjustment equation y = 1(1 – e−0.1784x), OPD was estimated to be 16.8 plants/m2 at harvest (11.7 plants per linear meter in 0.7 m between rows) for the peanut growing region of Cordoba. This approach can be a valuable input, along with other variables to analyze, when choosing peanut sowing density.

scholarly journals Yield and quality of tomato grown in a hydroponic system, with different planting densities and number of bunches per plant

2018 ◽  
Vol 48 (4) ◽  
pp. 340-349 ◽  
Author(s):  
Flávio Barcellos Cardoso ◽  
Herminia Emilia Prieto Martinez ◽  
Derly José Henriques da Silva ◽  
Carla do Carmo Milagres ◽  
José Geraldo Barbosa
Keyword(s):  
Fruit Quality ◽  
Plant Density ◽  
Irrigation System ◽  
Block Design ◽  
Total Yield ◽  
Fresh Mass ◽  
Planting Density ◽  
High Yield ◽  
Hydroponic System

ABSTRACT Obtaining a high yield of good quality fruits is one of the main challenges of the tomato crop. The enhancement in plant density promotes a reduction in the fruit fresh mass and an increase the yield per area. On the other hand, commercialization parameters take into account number and fresh mass of fruits. This study aimed at evaluating the yield and fruit quality of indeterminate growth hybrid tomato (Rebeca), cultivated in a hydroponic system, with different planting densities and number of bunches per plant. The experiment was conducted under greenhouse conditions, in a sub-irrigation system containing expanded clay as substrate. A split-plot randomized block design, with three replications, was used. In the plots, four planting densities (11.1 plants m-2, 8.3 plants m-2, 6.6 plants m-2 and 5.5 plants m-2) were allocated and, in the subplots, the number of bunches per plant (one or two). The total yield was influenced by the interaction planting density x number of bunches per plant. The treatment that allowed the highest yield was 11.1 plants m-2 with two bunches, with 22.61 kg m-2 or 226.1 t ha-1, in a crop cycle of 134 days. The observed variations for the nutrient contents of leaves and fruits of tomato plants with one or two bunches, at densities of 5.5-11.1 plants m-2, do not compromise the fruit quality nor influence the production of tradable fruits, using the hydroponic system.

scholarly journals 'Tommy Atkins' mango trees subjected to high density planting in subhumid tropical climate in northeastern Brazil

2012 ◽  
Vol 47 (1) ◽  
pp. 36-43 ◽  
Author(s):  
Carlos Antônio Ferreira de Sousa ◽  
Maria Irisvalda Leal Gondim Cavalcanti ◽  
Lúcio Flavo Lopes Vasconcelos ◽  
Humberto Umbelino de Sousa ◽  
Valdenir Queiroz Ribeiro ◽  
...  
Keyword(s):  
Plant Growth ◽  
Fruit Quality ◽  
Tropical Climate ◽  
Quality Parameters ◽  
High Density ◽  
Fruit Yield ◽  
Northeastern Brazil ◽  
Planting Density ◽  
Mango Tree ◽  
Plant Densities

The objective of this work was to evaluate the effects of high density planting on 'Tommy Atkins' mango trees cultivated in subhumid warm tropical climate in northeastern Brazil. Treatments consisted of five spacial arrangements of plants (8x5 m, 7x4 m, 6x3 m, 5x2 m and 4x2 m), which resulted in the following plant densities: 250 (control), 357, 555, 1,000 and 1,250 plants per hectare. Plant vegetative and reproductive variables, besides fruit quality parameters, were evaluated at seven and eight years after transplantation to the field. In general, high density planting caused reduction in vegetative and reproductive variables of individual mango trees, but had little influence on fruit quality. Above 555 plants per hectare, a significant decrease was observed in mango tree growth. Furthermore, there were decreases in the percentage of flowering, fruit yield per plant and per area. However, planting density up to 357 plants per hectare, in spite of decreasing plant growth and fruit yield per tree, increases fruit yield per area in 30% in comparison to the control.

scholarly journals Long-term Effects of Rows per Bed and In-row Spacing on Yield and Spear Size of Asparagus

HortScience ◽  
1998 ◽  
Vol 33 (4) ◽  
pp. 652-654
Author(s):  
D.C. Sanders ◽  
J.D. Cure ◽  
W.J. Sperry ◽  
J.C. Gilsanz ◽  
C.A. Prince ◽  
...  
Keyword(s):  
Plant Density ◽  
Asparagus Officinalis ◽  
Planting Density ◽  
Yield Response ◽  
Row Spacing ◽  
Long Term Effects ◽  
Plant Densities ◽  
Hybrid Lines ◽  
The Relationship

Three studies were conducted at Clinton, N.C., to investigate the relationship between number of rows per bed, in-row spacing, and spear yield of asparagus (Asparagus officinalis L.) over 11 to 13 years. In the first study, increasing plant densities from 21,550 to 43,100 plants/ha by doubling the number of rows/bed increased the cumulative yield from 64% to 80% for three hybrid lines (`UC 157', `WSU 1', and `WSU 2') but only 6% for `Rutgers Beacon'. The effects of doubling the plant density were still apparent 13 years later. In the second study, yields of `Princeville' (`Mary Washington' selection) crowns, grown at densities from 14,000 to 86,000 plants/ha, were also increased for 8 years by doubling rows at various in-row spacings. In a third study, in which densities ranged from 21,000 to 387,900 plants/ha, the magnitude of the response to rows/bed was dependent on in-row spacing. Efficient use of bed space and the avoidance of crowding exerted a larger influence on productivity than did average planting density. The yield response to rows/bed was greater and more persistent through the years for wider in-row spacings. Spear size was only marginally responsive to rows per bed and in-row spacing.

EFFECT OF PLANT DENSITY AND ROW SPACING ON AGRONOMIC PERFORMANCE AND ECONOMIC RETURNS OF NONOILSEED SUNFLOWER IN SOUTHEASTERN SASKATCHEWAN

1985 ◽  
Vol 65 (3) ◽  
pp. 501-509 ◽  
Author(s):  
N. W. HOLT ◽  
R. P. ZENTNER
Keyword(s):  
Helianthus Annuus ◽  
Seed Size ◽  
Seed Yield ◽  
Plant Density ◽  
Row Spacing ◽  
Agronomic Performance ◽  
Economic Returns ◽  
Helianthus Annuus L ◽  
Large Seed ◽  
Plant Densities

Years, locations and planting density are significant factors that influence the agronomic performance of Sundak nonoilseed sunflower (Helianthus annuus L.) in southeastern Saskatchewan. As plant densities of sunflower were increased from 37 500 to 75 000 plants/ha at Indian Head from 1975 to 1977, achene (seed) yield and test weight increased linearly with density while percentages of roasting and dehulling seed categories decreased. Row spacings of 30–90 cm affected plant height and seed yield and size, but absolute amounts were not large. Based on 1984 prices of four seed-size categories, highest gross economic returns were favored by the higher plant densities. In a second test at Indian Head and Oxbow in 1979 and Areola in 1980, a range of plant densities from 22 900 to 76 400 plants/ha did not significantly affect seed yield or gross economic returns. However, yield and returns tended to be greatest for 50 000-60 000 plants/ha. Percentages of large seed decreased as plant population increased. Because markets generally favor the large-seed size categories and the price differentials among seed size categories tend to increase, plant densities of 40 000 to 50 000 plants/ha might better be recommended to allow for years with greater price differentials.Key words: Nonoilseed sunflower, Helianthus annuus L., plant density, row spacing, seed size, economic returns

Effects of seed size on growth, development and yield of monogerm sugar beet

1974 ◽  
Vol 82 (3) ◽  
pp. 517-531 ◽  
Author(s):  
R. K. Scott ◽  
F. Harper ◽  
D. W. Wood ◽  
K. W. Jaggard
Keyword(s):  
Sugar Beet ◽  
Seed Size ◽  
Plant Density ◽  
Fruit Size ◽  
Fruit Weight ◽  
Round Hole ◽  
Root:Shoot Ratio ◽  
Plant Densities ◽  
Total Growth ◽  
Commercial Processing

SUMMARYSamples of monogerm sugar-beet seed which had been cleaned but not processed, contained fruits weighing 2–27 mg and true seeds weighing 0·2–5·0 mg with seed weight averaging about 20% of fruit weight. Increasing fruit size by round hole sieving resulted in progressively greater percentage emergence. Radiography revealed that one reason for this improvement was that more locules were completely filled, and fewer contained shrivelled seeds or were empty. Commercial processing of one seed lot eliminated some but not all of the empty fruits or those containing poorly developed seeds.In the field, seedling size and root:shoot ratio increased with increasing seed size. Thus at equivalent plant densities, sugar yields were less from the smallest seed than from other grades because of the combined effects of less total growth and a less efficient partitioning of assimilates. Although improvements in establishment with increasing size grading were progressive, sugar yield at comparable plant densities was greater only from medium grades relative to the smallest grades, whilst yields from large and medium grades were similar. This difference was maintained irrespective of length of growing season or plant density.

INFLUENCE OF PLANT DENSITY ON THE DISTRIBUTION OF 14C-LABELLED ASSIMILATE IN MAIZE AT FLOWERING

1979 ◽  
Vol 59 (3) ◽  
pp. 577-584 ◽  
Author(s):  
G. O. EDMEADES ◽  
N. A. FAIREY ◽  
T. B. DAYNARD
Keyword(s):  
Zea Mays ◽  
Zea Mays L ◽  
Plant Density ◽  
Reproductive Organs ◽  
Planting Density ◽  
Dominant Factor ◽  
Vegetative Organs ◽  
Coefficients Of Variation ◽  
Plant Densities ◽  
Lower Stem

The distribution pattern of 14C-labelled assimilate in the flowering shoot of maize (Zea mays L.) grown in the field at three plant densities (50 000, 100 000 and 150 000 plants/ha) was determined by labelling with 14CO2 at 1 day after anthesis. Shoots were harvested 4 days later. Four leaf positions were fed 14CO2 at each density; relative to the ear leaf (EL), these were EL+4 (i.e. fourth leaf above ear leaf), EL+2, EL, and EL-2. At the lowest plant density EL-4 was also labelled. The dominant factor influencing assimilate distribution was the position of the assimilating leaf rather than plant density. Assimilate from upper leaves supplied the tassel, upper stem, and ear preferentially. Assimilate from lower leaves supplied the lower stem and ear. Among leaf positions the ear leaf supplied the greatest percentage of its assimilate (26% at 50 000 plants/ha and 19% at 150 000 plants/ha) to the developing cob (rachis plus grain initials). As density increased so did the proportion of labelled assimilate remaining in labelled leaves. Coefficients of variation, computed among individual plants, indicated that assimilate distribution to reproductive organs was more variable than that to vegetative organs and that this variability increased with planting density.

Sign in / Sign up

Export Citation Format

Share Document