scholarly journals Plant density and peanut crop yield (Arachis hypogaea) in the peanut growing region of Córdoba (Argentina)

2018 ◽  
Vol 45 (2) ◽  
pp. 82-86 ◽  
Author(s):  
F.D. Morla ◽  
O. Giayetto ◽  
E. M. Fernandez ◽  
G. A. Cerioni ◽  
C. Cerliani
Keyword(s):  
Field Experiments ◽  
Plant Density ◽  
Yield Response ◽  
Factors Affecting ◽  
Growing Seasons ◽  
Peanut Crop ◽  
Wide Range ◽  
Plant Densities ◽  
Growing Conditions ◽  
Growing Region

ABSTRACT Plant density is one of the most important management factors affecting the peanut growth, modifying the capacity to capture radiation, water and nutrients. Peanut yield response to increased plant density changes according to environmental conditions, the genotype used, and planting date. Therefore, the optimum plant density (OPD) may vary with location. The aim of this project was (i) to fit the Mitscherlich's equation of diminishing productivities to the yield response of runner-type peanuts to increasing plant density under different growing conditions in the peanut growing region of Cordoba Argentina; and (ii) validate this model with independent experimental data. The first stage was based on the analysis of data from different projects of plant densities carried out in the peanut growing area of Córdoba. This information was adjusted to the decreasing yield equation and the OPD was calculated. For validation, a field experiment was conducted during the 2013/14 and 2014/15 growing seasons under irrigated and rain-fed conditions where pod yield was evaluated for 5, 12, 18, 25 and 36 plants/m2. No interaction was detected between soil moisture conditions and plant density. Yield response to plant density had a high degree of fitness for a wide range of environmental and crop conditions. In field experiments, the peanut yield decreased only at the lowest plant density (5 plants/m2). Yield response to density adjusted to the Mitscherlich equation indicated that OPD ranged from 10.5 to 24.8 plants/m2. Using a single adjustment equation y = 1(1 – e−0.1784x), OPD was estimated to be 16.8 plants/m2 at harvest (11.7 plants per linear meter in 0.7 m between rows) for the peanut growing region of Cordoba. This approach can be a valuable input, along with other variables to analyze, when choosing peanut sowing density.

scholarly journals Tillering does not interfere on white oat grain yield response to plant density

2003 ◽  
Vol 60 (2) ◽  
pp. 253-258 ◽  
Author(s):  
Milton Luiz de Almeida ◽  
Luís Sangoi ◽  
Márcio Ender ◽  
Anderson Fernando Wamser
Keyword(s):  
Grain Yield ◽  
Dry Matter ◽  
Field Experiments ◽  
Plant Density ◽  
Dry Mass ◽  
Main Stem ◽  
Yield Response ◽  
Individual Plant ◽  
Growing Seasons ◽  
Plant Densities

Plant density is one of the cropping practices that has the largest impact on individual plant growth. This work was conducted to evaluate the response of white oat (Avena sativa) cultivars with contrasting tillering patterns to variations in plant density. Two field experiments were carried out in Lages, SC, Brazil, during the 1998 and 1999 growing seasons. A split plot experimental design was used. Four oat cultivars were tested in the main plots: UFRGS 14, UFRGS 18, UPF 16 and UPF 17 using five plant densities split plots: 50, 185, 320, 455 and 550 plants m-2. Five plant samples were taken 25, 34, 48, 58 and 70 days after plant emergence to assess the treatment effects on dry matter partition between main stem and tillers. UFRGS 18 promoted dry matter allocation to tillers whereas UPF 17 directed dry mass mostly to the main stem. Differences in dry mass allocation between the main stem and tillers had no impact on grain yield, UPF 16 presenting the highest values for both growing seasons. The lack of interaction between population density and cultivar and the small effect of plant population on grain yield indicates that the oat tillering ability is not fundamental to define its grain yield.

Agronomic Aspects of Broad Beans (Vicia Faba L.) Grown in the Sudan

1968 ◽  
Vol 4 (2) ◽  
pp. 151-159 ◽  
Author(s):  
E. A. K. El Saeed
Keyword(s):  
Field Experiments ◽  
Plant Density ◽  
Dry Weight ◽  
Factors Affecting ◽  
Growing Seasons ◽  
Broad Beans ◽  
Final Yield ◽  
Total Seed ◽  
Leaf Dry Weight ◽  
Pod Growth

SummaryField experiments in three successive growing seasons (1963–66) studied effects of variety and plant density on yield components of broad beans. In 1963/64 total seed yield of a local variety (Beladi), increased with increasing seed rates from 70 to 280 lb per feddan, but yield increment diminished beyond 140 lb. The same results were obtained with Beladi and Rebaya 34 in 1964/65 and 1965/66, but Rebaya 34, yielded less than Beladi at all seed rates. Growth analysis revealed that Rebaya 34 had greater growth rate at the beginning of the season, due to its relatively large seed size, but eventually Beladi overtook it. Maximum pod growth in both varieties occurred when leaf dry weight was declining. The proportion of dry matter was greater in pods of Beladi than Rebaya 34 because of more sinks in the former variety. The present seed rate of 70 lb per feddan seems to be suboptimal and factors affecting establishment and/or effective leaf area at the time of pod growth are detrimental to the final yield.

Agronomic studies on the productivity of kenaf (Hibiscus cannabinus L. cv. Guatemala 4) under rainfed and irrigated conditions in the Northern Territory

1990 ◽  
Vol 30 (3) ◽  
pp. 395 ◽  
Author(s):  
RC Muchow ◽  
JD Sturtz ◽  
MF Spillman ◽  
GE Routley ◽  
S Kaplan ◽  
...  
Keyword(s):  
Field Experiments ◽  
Plant Density ◽  
Northern Territory ◽  
Growth And Yield ◽  
Stem Length ◽  
Yield Potential ◽  
Yield Response ◽  
Rainfall Season ◽  
Wide Range ◽  
Average Rainfall

Field experiments were conducted at Berrimah, Douglas Daly and Katherine in the Northern Territory (NT) during the 1987-88 and 1988-89 wet seasons to obtain yield data for kenaf (Hibiscus cannabinzis L. cv. Guatemala 4) grown under rainfed and irrigated conditions. Under rainfed conditions, maximum stem yield was obtained from sowings early in the wet season. Yield decreased with delay in sowing until the late-December-January period. The maximum rainfed stem yield at Katherine in an above-average rainfall season was 18 400 kg/ha. The maximum yield in a below average rainfall season was 11 700 kg/ha at Katherine, 9200 kg/ha at Douglas Daly and 9400 kg/ha at Berrimah. The applicability to the NT of growth and yield relationships established for irrigated kenaf in the Ord Irrigation Area (OIA) was assessed. The yield potential under irrigated conditions in the NT (21 600 kg/ha at 131 days after sowing) was higher than that reported elsewhere in Australia for the same growth period, but similar to that reported elsewhere for longer growth duration (180-300 days). In the NT, in contrast to the OIA, stem yield showed little or no response to N fertilisation. Stem yield was not related to N uptake, and at high levels of N application, there was marked N accumulation in the stem. Kenaf was able to accumulate up to 110 kg N/ha from the soil reserve where no N was applied. The yield response to plant density varied with the yield level and was similar to that in the OIA. Bark and core yield could be estimated directly from biomass, and indirectly from stem length and plant density, over a wide range of yield levels and cultural conditions. It was concluded that data relating to yield potential and response to N fertilisation cannot be transferred directly from the OIA to the NT.

scholarly journals Spatial Variability of Nitrogen Uptake and Net Removal and Actual Evapotranspiration in the California Desert Carrot Production System

Agriculture ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 752
Author(s):  
Aliasghar Montazar ◽  
Daniel Geisseler ◽  
Michael Cahn
Keyword(s):  
Field Experiments ◽  
N Uptake ◽  
Actual Evapotranspiration ◽  
Yield Response ◽  
N Availability ◽  
Fresh Market ◽  
N Application ◽  
Total N ◽  
Growing Seasons ◽  
Wide Range

Nitrogen (N) and irrigation water must be effectively used in mineral soils to produce carrots with high yield and minimal environmental impact. This study attempts to identify optimal N and irrigation management practices for low desert carrot production in California by investigating consumptive water use and N uptake and removal rates in fresh market and processing carrots. Field experiments were conducted at the University of California Desert Research and Extension Center and nine farmer fields during two growing seasons. The actual evapotranspiration (ETa) was measured using the residual energy balance method with a combination of surface renewal and eddy covariance equipment. Crop canopy coverage, actual soil nitrate-N from multiple depths as well as total N percentage, dry matter, and fresh biomass in roots and tops were measured over the growing seasons. The length of the crop season had a wide range amongst the experimental sites: from a 128-day period in a processing carrot field to as long as 193 days in a fresh market carrot field. The seasonal ETa varied between 305.8 mm at a silty loam furrow irrigated processing carrot field and 486.2 mm at a sandy clay loam sprinkler irrigated fresh market field. The total N accumulated at harvest ranged between 205.4 kg ha−1 (nearly 52% in roots) and 350.5 kg ha−1 (nearly 64% in roots). While the mean value of nitrogen removed by carrot roots varied from 1.24 to 1.73 kg N/Mg carrot roots, it appears that more N was applied than was removed by carrot roots at all sites. Within the range of N application rates examined at the experimental sites, there was no significant relationship between carrot fresh root yield and N application rate, although the results suggested a positive effect of N application on carrot yield. Sufficient soil N availability over the growing season and the lack of significant yield response to N application illuminated that optimal N rates are likely less than the total amounts of N applied at most sites.

A study of the principal factors affecting the establishment and development of the field bean (Vicia faba)

1952 ◽  
Vol 42 (4) ◽  
pp. 335-346 ◽  
Author(s):  
M. H. R. Soper
Keyword(s):  
Plant Density ◽  
Low Fertility ◽  
Field Bean ◽  
Individual Plant ◽  
High Fertility ◽  
Factors Affecting ◽  
Wide Range ◽  
Plant Densities ◽  
Dry Seasons ◽  
The Individual

1. A survey of bean crops was carried out in the Oxford area in the years 1947–9 with the object of studying farmers' methods, and the factors affecting establishment and development of the crop in the field.2. The season and the fertility status of the soil have a profound influence on the development of the crop, while plant density affects the growth of the individual plant.3. Hard winters cause crop losses which may amount to more than 50% of the plants. Mortality continues throughout the season.4. A warm dry spring and an equable summer temperature favour pod production more than hot, dry seasons.5. High plant densities cause: (1) a reduced rate of pod formation on each plant over a wide range of conditions, but a greater reduction on poor land than under good conditions; (2) a reduction in stem formation on low fertility fields (but not on high fertility land); (3) a significant increase in pod production per acre on high quality fields.6. A high level of fertility leads to significantly more pods/acre, owing to better plant survival and increased branching and podding.7. Under conditions favouring vegetative growth, there appears to be some competition between stem production and pod production, for the correlation between stems/plant and pods/plant found on low fertility land and in dry seasons no longer holds under good growing conditions.8. In an average crop, there is a very serious loss of flowers and partly matured pods, which may amount to 85% of the flowers formed.9. This wastage may be due to (1) unsatisfactory pollination or self-infertility, (2) inadequate availability of certain plant nutrients, (3) unsuitable environmental conditions, particularly low light intensity in dense crops.10. Botrytis cinerea can cause a high wastage of crop, but it did not figure prominently during the 3 years of the survey, and appeared to be associated with deficiency of potash and/or phosphate in the only two severe outbreaks that occurred.

Control of Winged Waterprimrose (Jussiaea decurrens) and Northern Jointvetch (Aeschynomene virginica) with Fungal Pathogens

Weed Science ◽  
1979 ◽  
Vol 27 (5) ◽  
pp. 497-501 ◽  
Author(s):  
C. D. Boyette ◽  
G. E. Templeton ◽  
R. J. Smith
Keyword(s):  
Oryza Sativa ◽  
Glycine Max ◽  
Fungal Pathogens ◽  
Liquid Culture ◽  
Field Experiments ◽  
Colletotrichum Gloeosporioides ◽  
Pathogenic Fungus ◽  
Field Tests ◽  
Wide Range ◽  
Growing Region

An indigenous, host-specific, pathogenic fungus that parasitizes winged waterprimrose [Jussiaea decurrens(Walt.) DC.] is endemic in the rice growing region of Arkansas. The fungus was isolated and identified asColletotrichum gloeosporioides(Penz.) Sacc. f.sp. jussiaeae(CGJ). It is highly specific for parasitism of winged waterprimrose and not parasitic on creeping waterprimrose (J. repensL. var.glabrescensKtze.), rice (Oryza sativaL.), soybeans [Glycine max(L.) Merr.], cotton (Gossypium hirsutumL.), or 4 other crops and 13 other weeds. The fungus was physiologically distinct from C.gloeosporioides(Penz.) Sacc. f. sp.aeschynomene(CGA), an endemic anthracnose pathogen of northern jointvetch[Aeschynomene virginica(L.) B.S.P.], as indicated by cross inoculations of both weeds. Culture in the laboratory and inoculation of winged waterprimrose in greenhouse, growth chamber and field experiments indicated that the pathogen was stable, specific, and virulent in a wide range of environments. The pathogen yielded large quantities of spores in liquid culture. It is suitable for control of winged waterprimrose. Winged waterprimrose and northern jointvetch were controlled in greenhouse and field tests by application of spore mixtures of CGJ and CGA at concentrations of 1 to 2 million spores/ml of each fungus in 94 L/ha of water; the fungi did not damage rice or nontarget crops.

scholarly journals Rattail fescue (Vulpia myuros) interference and seed production as affected by sowing time and crop density in winter wheat

Weed Science ◽  
2020 ◽  
pp. 1-10
Author(s):  
Muhammad Javaid Akhter ◽  
Per Kudsk ◽  
Solvejg Kopp Mathiassen ◽  
Bo Melander
Keyword(s):  
Winter Wheat ◽  
Grain Yield ◽  
Seed Production ◽  
Yield Components ◽  
Field Experiments ◽  
Growing Season ◽  
Sowing Time ◽  
Growing Seasons ◽  
Crop Density ◽  
Wide Range

Abstract Field experiments were conducted in the growing seasons of 2017 to 2018 and 2018 to 2019 to evaluate the competitive effects of rattail fescue [Vulpia myuros (L.) C.C. Gmel.] in winter wheat (Triticum aestivum L.) and to assess whether delayed crop sowing and increased crop density influence the emergence, competitiveness, and fecundity of V. myuros. Cumulative emergence showed the potential of V. myuros to emerge rapidly and under a wide range of climatic conditions with no effect of crop density and variable effects of sowing time between the two experiments. Grain yield and yield components were negatively affected by increasing V. myuros density. The relationship between grain yield and V. myuros density was not influenced by sowing time or by crop density, but crop–weed competition was strongly influenced by growing conditions. Due to very different weather conditions, grain yield reductions were lower in the growing season of 2017 to 2018 than in 2018 to 2019, with maximum grain yield losses of 22% and 50% in the two growing seasons, respectively. The yield components, number of crop ears per square meter, and 1,000-kernel weight were affected almost equally, reflecting that V. myuros’s competition with winter wheat occurred both early and late in the growing season. Seed production of V. myuros was suppressed by delaying sowing and increasing crop density. The impacts of delayed sowing and increasing crop density on seed production of V. myuros highlight the potential of these cultural weed control tactics in the long-term management programs of this species.

Assessment of sowing dates and plant densities using CSM-CROPGRO-Soybean for soybean maturity groups in low latitude

2021 ◽  
pp. 1-14
Author(s):  
L. S. Sampaio ◽  
R. Battisti ◽  
M. A. Lana ◽  
K. J. Boote
Keyword(s):  
Management Practices ◽  
Field Experiments ◽  
Plant Density ◽  
Crop Model ◽  
Management Scenarios ◽  
Low Latitude ◽  
Area Index ◽  
Sowing Dates ◽  
Plant Densities ◽  
Maturity Groups

Abstract Crop models can be used to explain yield variations associated with management practices, environment and genotype. This study aimed to assess the effect of plant densities using CSM-CROPGRO-Soybean for low latitudes. The crop model was calibrated and evaluated using data from field experiments, including plant densities (10, 20, 30 and 40 plants per m2), maturity groups (MG 7.7 and 8.8) and sowing dates (calibration: 06 Jan., 19 Jan., 16 Feb. 2018; and evaluation: 19 Jan. 2019). The model simulated phenology with a bias lower than 2 days for calibration and 7 days for evaluation. Relative root mean square error for the maximum leaf area index varied from 12.2 to 31.3%; while that for grain yield varied between 3 and 32%. The calibrated model was used to simulate different management scenarios across six sites located in the low latitude, considering 33 growing seasons. Simulations showed a higher yield for 40 pl per m2, as expected, but with greater yield gain increments occurring at low plant density going from 10 to 20 pl per m2. In Santarém, Brazil, MG 8.8 sown on 21 Feb. had a median yield of 2658, 3197, 3442 and 3583 kg/ha, respectively, for 10, 20, 30 and 40 pl per m2, resulting in a relative increase of 20, 8 and 4% for each additional 10 pl per m2. Overall, the crop model had adequate performance, indicating a minimum recommended plant density of 20 pl per m2, while sowing dates and maturity groups showed different yield level and pattern across sites in function of the local climate.

scholarly journals Fall and spring seeding date effects on herbicide-tolerant canola (Brassica napus L.) cultivars

2004 ◽  
Vol 84 (2) ◽  
pp. 419-430 ◽  
Author(s):  
G. W. Clayton ◽  
K. N. Harker ◽  
J. T. O’Donovan ◽  
R. E. Blackshaw ◽  
L. M. Dosdall ◽  
...  
Keyword(s):  
Field Experiments ◽  
Plant Density ◽  
Early Spring ◽  
Yield Response ◽  
Management Options ◽  
Brassica Napus L ◽  
Seeding Date ◽  
Herbicide Tolerant ◽  
Root Maggot ◽  
Crops Yield

More flexible and effective weed control with herbicide-tolerant B. napus canola allows for additional seeding management options, such as fall (dormant) and early spring (ES) seeding. Field experiments were conducted at Lacombe and Beaverlodge (1999–2001), Didsbury (1999–2000), and Lethbridge (2000–2001), Alberta, Canada, primarily to evaluate the effect of fall (late October-November), ES (late April-early May), and normal spring (NS) (ca. mid-May) seeding dates on glufosinate-, glyphosate-, and imidazolinone-tolerant canola development and yield. Fall seeding resulted in 46% lower plant density and nearly double the dockage than spring seeding. ES-seeded canola had 19% higher seed yield and 2.1% higher oil content than fall-seeded canola. ES seeding significantly increased yield compared to fall-seeded canola for 8 of 10 site -years or compared to NS seeding for 4 of 10 site-years; ES-seeded canola equalled the yield of NS-seeded canola for 6 of 10 site-years. Yield response to seeding date did not differ among herbicide-tolerant cultivars. Seeding date did not influence root maggot damage. Seeding canola as soon as possible in spring increases the likelihood of optimizing canola yield and quality compared to fall seeding and traditional spring seeding dates. Key words: Dormant seeding, seeding management, root maggot, herbicide-resistant crops, yield components, operational diversity

scholarly journals Patterns of tillering and grain production of winter wheat at a wide range of plant densities.

1978 ◽  
Vol 26 (4) ◽  
pp. 383-398 ◽  
Author(s):  
A. Darwinkel
Keyword(s):  
Winter Wheat ◽  
Grain Yield ◽  
Harvest Index ◽  
Plant Density ◽  
Fold Increase ◽  
Grain Production ◽  
Higher Plant ◽  
Grain Number ◽  
Wide Range ◽  
Plant Densities

The effect of plant density on the growth and productivity of the various ear-bearing stems of winter wheat was studied in detail to obtain information on the pattern of grain production of crops grown under field conditions. Strong compensation effects were measured: a 160-fold increase in plant density (5-800 plants/m2) finally resulted in a 3-fold increase in grain yield (282 to 850 g DM/m2). Max. grain yield was achieved at 100 plants/m2, which corresponded to 430 ears/m2 and to about 19 000 grains/m2. At higher plant densities more ears and more grains were produced, but grain yield remained constant. Tillering/plant was largely favoured by low plant densities because these allowed tiller formation to continue for a longer period and a greater proportion of tillers produced ears. However, at higher plant densities more tillers/unit area were formed and, despite a higher mortality, more ears were produced. The productivity of individual ears, from main stems as well as from tillers, decreased with increasing plant density and with later emergence of shoots. In the range from 5 to 800 plants/m2 grain yield/ear decreased from 2.40 to 1.14 g DM. At 800 plants/m2 nearly all ears originated from main stems, but with decreasing plant density tillers contributed increasingly to the number of ears. At 5 plants/m2, there were 23 ears/plant and grain yield/ear ranged from 4.20 (main stem) to 1.86 g DM (late-formed stems). Grain number/ear was reduced at higher densities and on younger stems, because there were fewer fertile spikelets and fewer grains in these spikelets. At the low density of 5 plants/m2, plants developed solitarily and grain yield/ear was determined by the number of grains/ear as well as by grain wt. Above 400 ears/m2, in this experiment reached at 100 plants/m2 and more, grain yield/ear depended solely on grain number, because the wt. of grains of the various stems were similar. The harvest index showed a max. of about 44% at a moderate plant density; at this density nearly max. grain yield was achieved. At low plant densities the harvest index decreased from 45% in main stems to about 36% in late-formed stems. However, no differences in harvest index existed between the various ear-bearing stems if the number of ears exceeded 400/m2. (Abstract retrieved from CAB Abstracts by CABI’s permission)

Sign in / Sign up

Export Citation Format

Share Document