A BIM-enabled Estimating Framework of Embodied Emissions of Building Materials for Optimization in Design Stage: A Case Study

2013 ◽  
Vol 7 (8) ◽  
pp. 645-653 ◽  
Author(s):  
Chao MAO ◽  
Qiping SHEN ◽  
Jun WANG ◽  
Chen LU
Keyword(s):  
Building Materials ◽  
Design Stage

scholarly journals Use of EPD System for Designing New Building Materials: The Case Study of a Bio-Based Thermal Insulation Panel from the Pineapple Industry By-Product

2020 ◽  
Vol 12 (17) ◽  
pp. 6864
Author(s):  
Diego Armando Arellano-Vazquez ◽  
Luca Moreschi ◽  
Adriana Del Borghi ◽  
Michela Gallo ◽  
Gustavo Islas Valverde ◽  
...  
Keyword(s):  
Environmental Sustainability ◽  
Building Materials ◽  
Photochemical Oxidation ◽  
Design Stage ◽  
Characterization Methods ◽  
Environmental Product Declarations ◽  
Acidification Potential ◽  
Iso 14025 ◽  
By Products

This study shows the benefits of using the environmental product declarations (EPDs), based on ISO 14025:2013, for the configuration and conceptualization of new building materials. Using a quantitative evaluation on these phases of design, it allows one to create materials with lower impacts, in comparison with the existing ones. In this paper, it is proposed to evaluate the potentiality of this tool in the development of a panel from pineapple by-products from agroindustry, used as a thermal insulator. The issue of environmental sustainability was pursued, employing the assessment of the environmental impacts according to characterization methods defined by the International EPD® System. By comparing the possible compositions of the materials under development, with certified environmental declarations of commercial materials, it is possible to identify and select optimal compositions decreasing up to 98.28% of impacts in acidification potential or up to 99.38% for photochemical oxidation—with respect to traditional materials—already at the design stage, where the changes on the composition or the facilities decision have fewer complications.

scholarly journals FUZZY MONTE CARLO SIMULATION OPTIMIZATION FOR SELECTING MATERIALS IN GREEN BUILDINGS

2020 ◽  
Vol 28 (2) ◽  
pp. 95-104
Author(s):  
Mohamed Marzouk
Keyword(s):  
Monte Carlo Simulation ◽  
Monte Carlo ◽  
Building Materials ◽  
Simulation Optimization ◽  
Rating System ◽  
Mixed Integer ◽  
Design Stage ◽  
New Construction ◽  
The Cost

Global interest in sustainable and green building design has been increasing in the last few decades. This interest is strengthened by the fact that sustainable measures help in reducing negative social and environmental impacts of buildings. For that, this paper aims to develop a mixed integer optimization model that aids architects/designers and owner representatives during design stage in selecting building materials taking into consideration costs and risks that are involved in the selection process. The model is developed as a simulation optimization tool based on the Leadership in Energy and Environmental Design (LEED) rating system for new construction. The developed model allows deterministic and probabilistic cost analysis of various design alternatives. In addition, it identifies the least possible cost to gain the LEED credits and the risks associated with materials’ quantities and materials’ unit prices. To illustrate the use of the proposed tool, a case study of an office building project constructed in Egypt is presented. An integrated Fuzzy Monte Carlo Simulation (FMCS) analysis is performed to account for the associated risks of using new materials in the considered case study. The proposed model is capable to capture the cost uncertainty of building materials and to identify the cost and sustainability performance of various building materials by relating the LEED rating system for new construction.

scholarly journals Preventing Dampness Related Health Risks at the Design Stage of Buildings in Mediterranean Climates: A Cyprus Case Study

Buildings ◽  
2018 ◽  
Vol 8 (5) ◽  
pp. 66
Author(s):  
Ugochukwu Elinwa ◽  
Cemil Atakara ◽  
Ifeoluwa Ojelabi ◽  
Abiola Abiodun
Keyword(s):  
Health Risks ◽  
Design Stage

scholarly journals Impact of Window to Wall Ratio on Energy Loads in Hot Regions: A Study of Building Energy Performance

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1080
Author(s):  
Mamdooh Alwetaishi ◽  
Omrane Benjeddou
Keyword(s):  
Saudi Arabia ◽  
Building Materials ◽  
Building Design ◽  
Building Energy ◽  
Energy Performance ◽  
Design Stage ◽  
Design Solution ◽  
Building Energy Efficiency ◽  
Climatic Regions ◽  
Heating And Cooling

The concern regarding local responsive building design has gained more attention globally as of late. This is due to the issue of the rapid increase in energy consumption in buildings for the purpose of heating and cooling. This has become a crucial issue in educational buildings and especially in schools. The major issue in school buildings in Saudi Arabia is that they are a form of prototype school building design (PSBD). As a result, if there is any concern in the design stage and in relation to the selection of building materials, this will spread throughout the region. In addition to that, the design is repeated regardless of the climate variation within the kingdom of Saudi Arabia. This research will focus on the influence of the window to wall ratio on the energy load in various orientations and different climatic regions. The research will use the energy computer tool TAS Environmental Design Solution Limited (EDSL) to calculate the energy load as well as solar gain. During the visit to the sample schools, a globe thermometer will be used to monitor the globe temperature in the classrooms. This research introduces a framework to assist architects and engineers in selecting the proper window to wall ratio (WWR) in each direction within the same building based on adequate natural light with a minimum reliance on energy load. For ultimate WWR for energy performance and daylight, the WWR should range from 20% to 30%, depending on orientation, in order to provide the optimal daylight factor combined with building energy efficiency. This ratio can be slightly greater in higher altitude locations.

scholarly journals Integration of Emergy Analysis with Building Information Modeling

2021 ◽  
Vol 13 (14) ◽  
pp. 7990
Author(s):  
Suman Paneru ◽  
Forough Foroutan Jahromi ◽  
Mohsen Hatami ◽  
Wilfred Roudebush ◽  
Idris Jeelani
Keyword(s):  
Life Cycle ◽  
Building Materials ◽  
Building Information Modeling ◽  
Energy Analysis ◽  
Information Modeling ◽  
Environmental Cost ◽  
Emergy Analysis ◽  
Modeling Tools ◽  
Building Information

Traditional energy analysis in Building Information Modeling (BIM) only accounts for the energy requirements of building operations during a portion of the occupancy phase of the building’s life cycle and as such is unable to quantify the true impact of buildings on the environment. Specifically, the typical energy analysis in BIM does not account for the energy associated with resource formation, recycling, and demolition. Therefore, a comprehensive method is required to analyze the true environmental impact of buildings. Emergy analysis can offer a holistic approach to account for the environmental cost of activities involved in building construction and operation in all its life cycle phases from resource formation to demolition. As such, the integration of emergy analysis with BIM can result in the development of a holistic sustainability performance tool. Therefore, this study aimed at developing a comprehensive framework for the integration of emergy analysis with existing Building Information Modeling tools. The proposed framework was validated using a case study involving a test building element of 8’ × 8’ composite wall. The case study demonstrated the successful integration of emergy analysis with Revit®2021 using the inbuilt features of Revit and external tools such as MS Excel. The framework developed in this study will help in accurately determining the environmental cost of the buildings, which will help in selecting environment-friendly building materials and systems. In addition, the integration of emergy into BIM will allow a comparison of various built environment alternatives enabling designers to make sustainable decisions during the design phase.

Method for Redesign of District Heating Networks within Transition from the 2nd to the 3rd Generation

2014 ◽  
Vol 657 ◽  
pp. 689-693
Author(s):  
Răzvan Corneliu Lefter ◽  
Daniela Popescu ◽  
Alexandrina Untăroiu
Keyword(s):  
District Heating ◽  
Design Stage ◽  
Heating Systems ◽  
Load Duration ◽  
Load Duration Curve ◽  
District Heating Systems ◽  
Consumption Rates ◽  
Heat Loads ◽  
Heating Networks

Important investmentsare made lately in the area of district heating, as a technology capable ofhelping countries to reach sustainability goals. In Romania, European fundswere spent for transition from the 2nd to the 3rdgeneration of district heating systems. The lack of appropriate monitoringsystems in old district heating systems makes optimisation nowadays very difficult,especially because nominal values used in the first design stage areoverestimated. Realistic nominal heat loads are necessary to make goodestimations of hydraulic parameters to be used for redesign. This studyproposes a method that uses the heat load duration curve theory to identify theappropriate nominal heat loads to be used for redesign. Comparison betweenresults obtained by applying the nominal heat loads of each consumer, as theywere established in the first design stage, and the ones identified by theproposed method are analyzed in a case study. The results show that errors arein the +/- 3% band, between the metered heat consumption rates and the proposedrates. The new method can be used for the sizing of pumps and district heatingnetworks after retrofit, in order to get better adjustments of the circulationpumps and increase of the energy efficiency.

scholarly journals Life Cycle Environmental Assessment of Light Steel Framed Buildings with Cement-Based Walls and Floors

2020 ◽  
Vol 12 (24) ◽  
pp. 10686
Author(s):  
Mona Abouhamad ◽  
Metwally Abu-Hamd
Keyword(s):  
Life Cycle ◽  
Building Materials ◽  
Simulation Software ◽  
Life Cycle Assessment Methodology ◽  
Building Information Model ◽  
Building Information ◽  
Cold Formed Steel ◽  
Environmental Measures ◽  
Materials Used

The objective of this paper is to apply the life cycle assessment methodology to assess the environmental impacts of light steel framed buildings fabricated from cold formed steel (CFS) sections. The assessment covers all phases over the life span of the building from material production, construction, use, and the end of building life, in addition to loads and benefits from reuse/recycling after building disposal. The life cycle inventory and environmental impact indicators are estimated using the Athena Impact Estimator for Buildings. The input data related to the building materials used are extracted from a building information model of the building while the operating energy in the use phase is calculated using an energy simulation software. The Athena Impact Estimator calculates the following mid-point environmental measures: global warming potential (GWP), acidification potential, human health potential, ozone depletion potential, smog potential, eutrophication potential, primary and non-renewable energy (PE) consumption, and fossil fuel consumption. The LCA assessment was applied to a case study of a university building. Results of the case study related to GWP and PE were as follows. The building foundations were responsible for 29% of the embodied GWP and 20% of the embodied PE, while the CFS skeleton was responsible for 30% of the embodied GWP and 49% of the embodied PE. The production stage was responsible for 90% of the embodied GWP and embodied PE. When benefits associated with recycling/reuse were included in the analysis according to Module D of EN 15978, the embodied GWP was reduced by 15.4% while the embodied PE was reduced by 6.22%. Compared with conventional construction systems, the CFS framing systems had much lower embodied GWP and PE.

Study on the impacts of peaking factors on a water distribution system in Germany

2010 ◽  
Vol 10 (2) ◽  
pp. 165-172 ◽  
Author(s):  
K. Diao ◽  
M. Barjenbruch ◽  
U. Bracklow
Keyword(s):  
Energy Consumption ◽  
Distribution System ◽  
Water Distribution ◽  
Water Distribution System ◽  
Water Distribution Network ◽  
Design Stage ◽  
Water Age ◽  
Specific System ◽  
Average Water

This paper aims to explore the impacts of peaking factors on a water distribution system designed for a small city in Germany through model-based analysis. As a case study, the water distribution network was modelled by EPANET and then two specific studies were carried out. The first study tested corresponding system-wide influences on water age and energy consumption if the peaking factors used at design stage are inconsistent with ones in real situation. The second study inspected the possible relationship between the choice of peaking factors and budgets by comparing several different pipe configurations of the distribution system, obtained according to variety of peaking factors. Given the analysis results, the first study reveals that average water age will increase if peaking factors estimated at design stage are larger than real values in that specific system, and vice versa. In contrast, energy consumption will increase if peaking factors defined for system design are smaller than ones in real case, and vice versa. According to the second study, it might be possible to amplify peaking factors for design dramatically by a slight increase in the investment on this system. However, further study on budget estimation with more factors and detailed information considered should be carried out.

Sign in / Sign up

Export Citation Format

Share Document