scholarly journals Urban Microclimate and Outdoor Thermal Comfort of Public Spaces in Warm-Humid Cities: A Comparative Bibliometric Mapping of the Literature

2021 ◽  
Vol 10 (04) ◽  
pp. 433-466
Author(s):  
Clarence Dissanyake ◽  
U.G.D. Weerasinghe
Keyword(s):  
Thermal Comfort ◽  
Public Spaces ◽  
Outdoor Thermal Comfort ◽  
Urban Microclimate ◽  
Bibliometric Mapping

scholarly journals Analysis of Urban Greening Scenarios for Improving Outdoor Thermal Comfort in Neighbourhoods of Lecce (Southern Italy)

Climate ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 116
Author(s):  
Elisa Gatto ◽  
Fabio Ippolito ◽  
Gennaro Rispoli ◽  
Oliver Savio Carlo ◽  
Jose Luis Santiago ◽  
...  
Keyword(s):  
Thermal Comfort ◽  
Urban Environment ◽  
Southern Italy ◽  
Hot Spot ◽  
Outdoor Thermal Comfort ◽  
Urban Greening ◽  
Urban Microclimate ◽  
Field Campaigns ◽  
Typical Summer ◽  
Radiant Temperature

This study analyses the interactions and impacts between multiple factors i.e., urban greening, building layout, and meteorological conditions that characterise the urban microclimate and thermal comfort in the urban environment. The focus was on two neighbourhoods of Lecce city (southern Italy) characterised through field campaigns and modelling simulations on a typical hot summer day. Field campaigns were performed to collect greening, building geometry, and microclimate data, which were employed in numerical simulations of several greening scenarios using the Computational Fluid Dynamics-based and microclimate model ENVI-met. Results show that, on a typical summer day, trees may lead to an average daily decrease of air temperature by up to 1.00 °C and an improvement of thermal comfort in terms of Mean Radiant Temperature (MRT) by up to 5.53 °C and Predicted Mean Vote (PMV) by up to 0.53. This decrease is more evident when the urban greening (in terms of green surfaces and trees) is increased by 1266 m2 in the first neighbourhood and 1988 m2 in the second one, with respect to the current scenario, proving that shading effect mainly contributes to improving the urban microclimate during daytime. On the contrary, the trapping effect of heat, stored by the surfaces during the day and released during the evening, induces an increase of the spatially averaged MRT by up to 2 °C during the evenings and a slight deterioration of thermal comfort, but only locally where the concentration of high LAD trees is higher. This study contributes to a better understanding of the ecosystem services provided by greening with regard to microclimate and thermal comfort within an urban environment for several hours of the day. It adds knowledge about the role of green areas in a Mediterranean city, an important hot spot of climate change, and thus it can be a guide for important urban regeneration plans.

Urban microclimate and outdoor thermal comfort. A proper procedure to fit ENVI-met simulation outputs to experimental data

2016 ◽  
Vol 26 ◽  
pp. 318-343 ◽  
Author(s):  
Ferdinando Salata ◽  
Iacopo Golasi ◽  
Roberto de Lieto Vollaro ◽  
Andrea de Lieto Vollaro
Keyword(s):  
Experimental Data ◽  
Thermal Comfort ◽  
Outdoor Thermal Comfort ◽  
Urban Microclimate

scholarly journals A Review and Insights for Eleven Years of Urban Microclimate Research Towards a New Egyptian ERA of Low Carbon, Comfortable and Energy-Efficient Housing Typologies

Atmosphere ◽  
2020 ◽  
Vol 11 (3) ◽  
pp. 236 ◽  
Author(s):  
Mohammad Fahmy ◽  
Sherif Mahmoud ◽  
Ibrahim Elwy ◽  
Hatem Mahmoud
Keyword(s):  
Thermal Comfort ◽  
Energy Efficient ◽  
Outdoor Thermal Comfort ◽  
Sustainable Cities ◽  
Low Carbon ◽  
Urban Microclimate ◽  
Urban Forms ◽  
New Era ◽  
Arid Conditions ◽  
Regular Review

Since the mid-1970s, urban development in Egypt has sprawled far from the distinguished compact arid built environment, as the court-yarded housing typologies that completed the vernacular picture of desert architecture have been discarded in the early 20th century. This has motivated urban microclimate research in Egypt. The main objective was initially to improve outdoor thermal comfort. Therefore, Egyptian research started with assessing different existing patterns for the sake of climate responsive and sustainable urban design practice characterized with low carbon, thermal comfort and energy efficiency in such a hot arid conditions. That is why the review workflow of this article has followed a design progress workflow that led to solving design complexities with regard to generating housing urban forms on a microclimate basis rather than an article regular review workflow in order to extract the research gaps and conclude insights. After discussing a general framework for generating housing sustainable design identified from the concluded gaps, the main conclusion is a vision and a call to integrate the Urban microclimate-Building passiveness-Renewables design dimensions, UBR, towards the evolution of a new era of energy efficient housing typologies and a 5th generation of Egyptian sustainable cities where the 1st generation of new Egyptian cities started 1970s.

scholarly journals Sustainable Urban Greening and Cooling Strategies for Thermal Comfort at Pedestrian Level

2021 ◽  
Vol 13 (6) ◽  
pp. 3138
Author(s):  
Maurizio Detommaso ◽  
Antonio Gagliano ◽  
Luigi Marletta ◽  
Francesco Nocera
Keyword(s):  
Thermal Comfort ◽  
Urban Areas ◽  
Fluid Dynamic ◽  
Green Roofs ◽  
Outdoor Thermal Comfort ◽  
Balance Model ◽  
Urban Greening ◽  
Cfd Model ◽  
Urban Microclimate ◽  
Urban Warming

The increase of the urban warming phenomenon all over the world is gaining increasing attention from scientists as well as planners and policymakers due to its adverse effects on energy consumption, health, wellbeing, and air pollution. The protection of urban areas from the outdoor warming phenomenon is one of the challenges that policy and governments have to tackle as soon as possible and in the best possible way. Among the urban heat island mitigation techniques, cool materials and urban greening are identified as the most effective solutions in reducing the urban warming phenomenon. The effects produced by the adoption of cool materials and urban forestation on the urban microclimate were investigated through a computational fluid-dynamic (CFD) model. The CFD model was calibrated and validated thanks to experimental surveys within the Catania University campus area. The urban microclimate thermal comfort analysis and assessment were carried out with the Klima–Michel Model (KMM) and Munich Energy Balance Model for Individuals (MEMI). In particular, three scenarios were performed: cool, low, and high levels of urban greening. The cool scenario, although it produces air temperature at around 1.00 °C, determines the worst condition of outdoor thermal comfort, especially at the pedestrian level. On the contrary, a high level of urban greening, obtained by the extensive green roofs together with an urban forestation, guarantees the wellbeing of pedestrians, showing more convenient values of PMV and PET.

scholarly journals Influence of Masks Protecting against SARS-CoV-2 on Thermal Comfort

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3315
Author(s):  
Ewa Zender-Świercz ◽  
Marek Telejko ◽  
Beata Galiszewska
Keyword(s):  
Thermal Comfort ◽  
Public Spaces ◽  
Point Of View ◽  
The Other ◽  
Health Policies ◽  
Thermal Manikin ◽  
Public Health Policies ◽  
Protective Shield ◽  
Full Face ◽  
The Impact

Due to the spread of the SARS-CoV-2 virus, most countries have tightened their public health policies. One way to limit the spread of the virus is to make mouth and nose cover compulsory in public spaces. The article presents the impact of wearing masks on the perception of thermal comfort. The following masks were analysed: FFP2, cotton, medical, PM2.5, half-face protective shield plastic and full-face protective shield plastic. The research was carried out for two scenarios of an ambient temperature: −20 and 30 °C. A thermal manikin was used for the tests. In the case of when a temperature equals 20 °C, the dry masks increase comfort, both general and local, while wet masks reduce comfort. On the other hand, at 30 °C, only wet masks do not increase discomfort. In addition, moist masks require less heat flux to achieve a certain skin temperature. However, it should be remembered that it is not advisable to wet the masks from the health point of view.

scholarly journals Ag/VO2/Ag sandwich nylon film for smart thermal management and thermo-responsive electrical conductivity

2021 ◽  
pp. 152808372098654
Author(s):  
Linghui Peng ◽  
Lingling Shen ◽  
Weiren Fan ◽  
Zichuan Liu ◽  
Hongbo Qiu ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Thermal Comfort ◽  
Thermal Management ◽  
Flexible Electronics ◽  
Sandwich Structure ◽  
Outdoor Thermal Comfort ◽  
Ir Radiation ◽  
Indoor Space ◽  
Layer Structures ◽  
Radiation Management

Due to the effects of climate changing, the importance of outdoor thermal comfort has been recognized, and has gained more and more research attentions. Unlike indoor space where air conditioning can be easily implemented, outdoor thermal comfort can only be achieved by localized thermal management. Using textile is a simple but energy-saving way to realize outdoor thermal comfort. Herein, we report the design of a smart thermal management film with the silver/vanadium dioxide/silver (Ag/VO2/Ag) sandwich structure prepared by one-dimensional (1 D) nanowires. It was found that the Ag/VO2/Ag sandwich film was able to lower the temperature by around 10 °C under intense infrared (IR) radiation. In addition, the Ag/VO2/Ag sandwich structure film showed a thermo-responsive electrical conductivity and an outstanding bending stability, due to network structure formed by nanowires. It was experimentally proved that this sandwich structure was superior to other layer structures in IR shielding performance and thermo-responsive electrical conductivity. The as-prepared Ag/VO2/Ag sandwich structure film has great potential for various applications such as wearable devices, flexible electronics, medical monitors and smart IR radiation management.

scholarly journals Modeling Mean Radiant Temperature Distribution in Urban Landscapes Using DART

2021 ◽  
Vol 13 (8) ◽  
pp. 1443
Author(s):  
Maria Angela Dissegna ◽  
Tiangang Yin ◽  
Hao Wu ◽  
Nicolas Lauret ◽  
Shanshan Wei ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Thermal Comfort ◽  
Leaf Area ◽  
Remote Sensing Data ◽  
Outdoor Thermal Comfort ◽  
Transfer Model ◽  
Mean Radiant Temperature ◽  
Area Index ◽  
Sensing Data ◽  
Radiant Temperature

The microclimatic conditions of the urban environment influence significantly the thermal comfort of human beings. One of the main human biometeorology parameters of thermal comfort is the Mean Radiant Temperature (Tmrt), which quantifies effective radiative flux reaching a human body. Simulation tools have proven useful to analyze the radiative behavior of an urban space and its impact on the inhabitants. We present a new method to produce detailed modeling of Tmrt spatial distribution using the 3-D Discrete Anisotropic Radiation Transfer model (DART). Our approach is capable to simulate Tmrt at different scales and under a range of parameters including the urban pattern, surface material of ground, walls, roofs, and properties of the vegetation (coverage, shape, spectral signature, Leaf Area Index and Leaf Area Density). The main advantages of our method are found in (1) the fine treatment of radiation in both short-wave and long-wave domains, (2) detailed specification of optical properties of urban surface materials and of vegetation, (3) precise representation of the vegetation component, and (4) capability to assimilate 3-D inputs derived from multisource remote sensing data. We illustrate and provide a first evaluation of the method in Singapore, a tropical city experiencing strong Urban Heat Island effect (UHI) and seeking to enhance the outdoor thermal comfort. The comparison between DART modelled and field estimated Tmrt shows good agreement in our study site under clear-sky condition over a time period from 10:00 to 19:00 (R2 = 0.9697, RMSE = 3.3249). The use of a 3-D radiative transfer model shows promising capability to study urban microclimate and outdoor thermal comfort with increasing landscape details, and to build linkage to remote sensing data. Our methodology has the potential to contribute towards optimizing climate-sensitive urban design when combined with the appropriate tools.

Sign in / Sign up

Export Citation Format

Share Document